Slip effect based bimodal nanofibrous membrane for high-efficiency and low-resistance air purification

Bio-inspired gradient poly(lactic acid) nanofibers for active capturing of PM0.3 and real-time respiratory monitoring

The concept of bio-inspired gradient hierarchies, in which the well-defined MOF nanocrystals serve as active nanodielectrics to create electroactive shell at poly(lactic acid) (PLA) nanofibers, is introduced to promote the surface activity and electroactivity of PLA nanofibrous membranes (NFMs). The strategy enabled significant refinement of PLA nanofibers during coaxial electrospinning (∼40 % decline of fiber diameter), accompanied by remarkable increase of specific surface area (nearly 1.5 m2/g), porosity (approximately 85 %) and dielectric constants for the bio-inspired gradient PLA (BG-PLA) NFMs. It largely boosted initial electret properties and electrostatic adsorption capability of BG-PLA NFMs, as well as charge regeneration by TENG mechanisms even under high-humidity environment. The BG-PLA NFMs thus featured exceptionally high PM0.3 filtration efficiencies with well-controlled air resistance (94.3 %, 163.4 Pa, 85 L/min), in contrast to the relatively low efficiency of only 80.0 % for normal PLA. During the application evaluation of outdoor air purification, excellent long-term filtering performance was demonstrated for the BG-PLA for up to 4 h (nearly 98.0 %, 53 Pa), whereas normal PLA exhibited a gradually declined filtration efficiency and an increased pressure drop. Moreover, the BG-PLA NFMs of increased electroactivity were ready to generate tribo-output currents as driven by respiratory vibrations, which enabled real-time monitoring of electrophysiological signals. This bio-inspired gradient strategy opens up promising pathways to engender biodegradable nanofibers of high surface activity and electroactivity, which has significant implications for intelligent protective membranes.

Rational Design of a Necklace-like ZIF-67/Poly(vinylidene fluoride) Electrospun Nanofiber Hybrid Membrane for Simultaneous Removal of PM0.3 and SO2

Growing concerns over poor air quality, especially in urban and industrial regions, have led to increased global demands for advanced air-purification technologies. However, the stability and airborne pollutant control abilities of the available air-purification materials under diverse environmental conditions are limited. Thus, the advanced development of filtration materials that can effectively control different types of pollutants, such as particulate matter (PM) and gaseous pollutants, simultaneously has attracted attention. The zeolitic imidazolate framework (ZIF), a type of porous metal-organic framework (MOF), is a promising material for capturing weakly acidic toxic gases such as SO2 owing to its excellent adsorption performance and high thermal and chemical stability. In this study, we successfully developed an ultrastable necklace-like multifunctional hybrid membrane via the cetyltrimethylammonium bromide-assisted in situ growth of zeolitic imidazolate framework (ZIF)-67 crystals on electrospun Co2+-doped poly(vinylidene fluoride) nanofibers (70 nm) that can be used in different moisture environments to achieve sustainable air-filtration performance. The hybrid nanocomposite membrane demonstrated excellent performance for the simultaneous control of intractable fine PM0.3 (filtration efficiency, 99.461%) and SO2 (adsorption capacity, 1476.5 mg g-1) under different humidity conditions. This study contributes to the optimal synergistic integration of the advanced metal-organic framework (MOF)-nanofiber nanocomposite membranes and can guide the rational design and conceptualization of a facile and novel membrane for various applications in the environmental science and energy fields.

Bioelectrets in Electrospun Bimodal Poly(lactic acid) Fibers: Realization of Multiple Mechanisms for Efficient and Long-Term Filtration of Fine PMs

Despite the great potential in fabrication of biodegradable and eco-friendly air filters by electrospinning poly(lactic acid) (PLA) membranes, the filtering performance is frequently dwarfed by inadequate physical sieving or electrostatic adsorption mechanisms to capture airborne particulate matters (PMs). Here, using the parallel spinning approach, the unique micro/nanoscale architecture was established by conjugation of neighboring PLA nanofibers, creating bimodal fibers in electrospun PLA membranes for the enhanced slip effect to significantly reduce the air resistance. Moreover, the bone-like nanocrystalline hydroxyapatite bioelectret (HABE) was exploited to enhance the dielectric and polarization properties of electrospun PLA, accompanied by the controlled generation of junctions induced by the microaggregation of HABE (10-30 wt %). The incorporated HABE was supposed to orderly align in the applied E-field and largely promote the charging capability and surface potential, gradually increasing to 7.2 kV from the lowest level of 2.5 kV for pure PLA. This was mainly attributed to HABE-induced orientation of PLA backbone chains and C═O dipoles, as well as the interfacial charges trapped at the interphases of HABE-PLA and crystalline region-amorphous PLA. Given the multiple capturing mechanisms, the micro/nanostructured PLA/HABE membranes were characterized by excellent and sustainable filtering performance, e.g., the filtration efficiency of PM_0.3 was promoted from 59.38% for pure PLA to 94.38% after addition of 30 wt % HABE at a moderate airflow capacity of 32 L/min and from 30.78 to 83.75% at the highest level of 85 L/min. It is of interest that the pressure drop was significantly decreased, mainly arising from the slip effect between the ultrafine nanofibers and conjugated microfibers. The proposed combination of the nanostructured electret and the multistructuring strategy offers the function integration of efficient filtration and low resistance that are highly useful to pursue fully biodegradable filters.

Modeling pressure drop values across ultra-thin nanofiber filters with various ranges of filtration parameters under an aerodynamic slip effect

Computational fluid dynamics simulations of fibrous filters with 56 combinations of different fiber sizes, packing densities, face velocities, and thicknesses were conducted for developing models that predict pressure drops across nanofiber filters. The accuracy of the simulation method was confirmed by comparing the numerical pressure drops to the experimental data obtained for polyacrylonitrile electrospun nanofiber filters. In the simulations, an aerodynamic slip effect around the surface of the small nanofibers was considered. The results showed that, unlike in the case of conventional filtration theory, pressure drops across the thin layers of electrospun nanofiber filters are not proportional to the thickness. This might be a critical factor for obtaining precise pressure drops across the electrospun nanofiber filters with extremely thin layers. Finally, we derived the product of drag coefficient and Reynolds number as a function of packing density, Knudsen number, and ratio of thickness to fiber diameter to get the correlation equation for pressure drop prediction. The obtained equation predicted the pressure drops across the nanofiber filters with the maximum relative difference of less than 15%.

Functional Textile Materials for Blocking COVID-19 Transmission

The outbreak of COVID-19 provided a warning sign for society worldwide: that is, we urgently need to explore effective strategies for combating unpredictable viral pandemics. Protective textiles such as surgery masks have played an important role in the mitigation of the COVID-19 pandemic, while revealing serious challenges in terms of supply, cross-infection risk, and environmental pollution. In this context, textiles with an antivirus functionality have attracted increasing attention, and many innovative proposals with exciting commercial possibilities have been reported over the past three years. In this review, we illustrate the progress of textile filtration for pandemics and summarize the recent development of antiviral textiles for personal protective purposes by cataloging them into three classes: metal-based, carbon-based, and polymer-based materials. We focused on the preparation routes of emerging antiviral textiles, providing a forward-looking perspective on their opportunities and challenges, to evaluate their efficacy, scale up their manufacturing processes, and expand their high-volume applications. Based on this review, we conclude that ideal antiviral textiles are characterized by a high filtration efficiency, reliable antiviral effect, long storage life, and recyclability. The expected manufacturing processes should be economically feasible, scalable, and quickly responsive.

Nude and Modified Electrospun Nanofibers, Application to Air Purification

Air transports several pollutants, including particulate matter (PM), which can produce cardiovascular and respiratory diseases. Thus, it is a challenge to control pollutant emissions before releasing them to the environment. Until now, filtration has been the most efficient processes for removing PM. Therefore, the electrospinning procedure has been applied to obtain membranes with a high filtration efficiency and low pressure drop. This review addressed the synthesis of polymers that are used for fabricating high-performance membranes by electrospinning to remove air pollutants. Then, the most influential parameters to produce electrospun membranes are indicated. The main results show that electrospun membranes are an excellent alternative to having air filters due to the versatility of the process, the capacity for controlling the fiber diameter, porosity, high filtration efficiency and low-pressure drop.

High-performance multifunctional electrospun fibrous air filter for personal protection: A review

With the increasingly serious air pollution and the rampant coronavirus disease 2019 (COVID–19), preparing high–performance air filter to achieve the effective personal protection has become a research hotspot. Electrospun nanofibrous membrane has become the first choice of air filter because of its small diameter, high specific surface area and porosity. However, improving the filtration performance of the filter only cannot meet the personal needs: it should be given more functions based on high filtration performance to maximize the personal benefits, called, multifunctional, which can also be easily realized by electrospinning technology, and has attracted much attention. In this review, the filtration mechanism of high–performance electrospun air filter is innovatively summarized from the perspective of membrane. On this basis, the specific preparation process, advantages and disadvantages are analyzed in detail. Furthermore, other functions required for achieving maximum personal protection benefits are introduced specifically, and the existing high–performance electrospun air filter with multiple functions are summarized. Finally, the challenges, limitations, and development trends of manufacturing high–performance air filter with multiple functions for personal protection are presented.

Multistage-Split Ultrafine Fluffy Nanofibrous Membrane for High-Efficiency Antibacterial Air Filtration

Antibacterial air filtration membranes are essential for personal protection during the pandemic of coronavirus disease 2019 (COVID-19). However, high-efficiency filtration with low pressure drop and effective antibiosis is difficult to achieve. To solve this problem, an innovative electrospinning system with low binding energy and high conductivity was built to enhance the jet splitting, and a fluffy nanofibrous membrane containing numerous ultrafine nanofibers and large quantities of antibacterial agents was achieved, which was fabricated by electrospinning polyamide 6 (PA6), poly(vinyl pyrrolidone) (PVP), chitosan (CS), and curcumin (Cur). The filtration efficiency for 0.3 μm NaCl particles was 99.83%, the pressure drop was 54 Pa, and the quality factor (QF) was up to 0.118 Pa^-1. CS and Cur synergistically enhanced the antibacterial performance; the bacteriostatic rates against Escherichia coli and Staphylococcus aureus were 99.5 and 98.9%, respectively. This work will largely promote the application of natural antibacterial agents in the development of high-efficiency, low-resistance air filters for personal protection by manufacturing ultrafine nanofibers with enhanced antibiosis.