Synergistic catalysis by Fe3O4-biochar/peroxymonosulfate system for the removal of bisphenol a

Preparation of a β-cyclodextrin grafted magnetic biochar for efficient extraction of four antiepileptic drugs in plasma samples

Simultaneous monitoring of plasma concentration levels of multiple antiepileptic drugs (AEDs) is essential for dose adjustment in comprehensive epilepsy treatment, necessitating a sensitive technique for accurate extraction and determination of AEDs. Herein, a magnetic solid-phase extraction (MSPE) technique on the basis of modified biochar (BC) is investigated to extract four AEDs from plasma, in conjunction with high performance liquid chromatography. BC derived from Zizyphus jujuba seed shells was activated by phosphoric acid (PBC) and magnetized via coprecipitation to produce MPBC. The MPBCCD obtained after modification with β-cyclodextrin (CD) was characterized and evaluated for adsorption. It exhibited fast adsorption kinetics based on second-order kinetics and satisfactory adsorption capacity for AEDs. Then it was employed as the MSPE adsorbent and the influencing parameters were optimized. The enrichment factor was 18.75. The validation analysis revealed a favorable linearity that ranged from 0.04 to 20 μg·mL-1 along with a low limit of detection of 6.85 to 10.19 ng·mL-1. The recovery of the AEDs ranged from 78.7 to 109.2 %, with relative standard deviations below 6.7 %. Using quantum chemistry theory calculations and experimental results analysis, the adsorption mechanism was investigated. It disclosed that the suggested strategy built upon MPBCCD was appropriate for the assessment of AEDs in plasma and expanded the usage of BC as the environmentally favorable matrix for the analysis of biological samples.

Edge interface microenvironment regulation of CoOOH/commercial activated carbon nano-hybrids enabling PMS activation for degrading ciprofloxacin

Peroxymonosulfate (PMS) is widely employed to generate oxygen-containing reactive species for ciprofloxacin (CIP) degradation. Herein, cobalt oxyhydroxide @activated carbon (CoOOH@AC) was synthesized via a wet chemical sedimentation method to activate PMS for degradation of CIP. The result suggested AC can support the vertical growth of CoOOH nanosheets to expose high-activity Co-contained edges, possessing efficient PMS activation and degradation activity and catalytic stability. In the presence of 3.0 mg of optimal CoOOH@AC and 2 mM PMS, 96.8 % of CIP was degraded within 10 min, approximately 11.6 and 9.97 times greater than those of CoOOH/PMS and AC/PMS systems. Notably, it was disclosed that the optimal CoOOH@AC/PMS system still exhibited efficient catalytic performance in a wide pH range, different organics and common co-existing ions. Quenching experiments and electron paramagnetic resonance indicated that both radical and non-radical processes contributed to the degradation of CIP, with 1O2 and direct electron transfer accounting for the non-radical pathway and SO4•- and •OH serving as the main radical active species. Finally, possible CIP degradation pathways were proposed based on high-performance liquid chromatography-mass spectrometry. This study provided an alternate method for wastewater treatment based on PMS catalyzed by cobalt-based hydroxide.

Unlocking the potential of magnetic biochar in wastewater purification: a review on the removal of bisphenol A from aqueous solution

Bisphenol A (BPA) is an essential and extensively utilized chemical compound with significant environmental and public health risks. This review critically assesses the current water purification techniques for BPA removal, emphasizing the efficacy of adsorption technology. Within this context, we probe into the synthesis of magnetic biochar (MBC) using co-precipitation, hydrothermal carbonization, mechanical ball milling, and impregnation pyrolysis as widely applied techniques. Our analysis scrutinizes the strengths and drawbacks of these techniques, with pyrolytic temperature emerging as a critical variable influencing the physicochemical properties and performance of MBC. We explored various modification techniques including oxidation, acid and alkaline modifications, element doping, surface functional modification, nanomaterial loading, and biological alteration, to overcome the drawbacks of pristine MBC, which typically exhibits reduced adsorption performance due to its magnetic medium. These modifications enhance the physicochemical properties of MBC, enabling it to efficiently adsorb contaminants from water. MBC is efficient in the removal of BPA from water. Magnetite and maghemite iron oxides are commonly used in MBC production, with MBC demonstrating effective BPA removal fitting well with Freundlich and Langmuir models. Notably, the pseudo-second-order model accurately describes BPA removal kinetics. Key adsorption mechanisms include pore filling, electrostatic attraction, hydrophobic interactions, hydrogen bonding, π-π interactions, and electron transfer surface interactions. This review provides valuable insights into BPA removal from water using MBC and suggests future research directions for real-world water purification applications.

Inactivation of antibiotic resistant bacteria by Fe3O4 @MoS2 activated persulfate and control of antibiotic resistance dissemination risk

Antibiotic resistance poses a global environmental challenge that jeopardizes human health and ecosystem stability. Antibiotic resistant bacteria (ARB) significantly promote the spreading and diffusion of antibiotic resistance. This study investigated the efficiency and mechanism of inactivating tetracycline-resistant Escherichia coli (TR E. coli) using Fe3O4 @MoS2 activated persulfate (Fe3O4 @MoS2/PS). Under optimized conditions (200 mg/L Fe3O4 @MoS2, 4 mM PS, 35 °C), TR E. coli (∼7.5 log CFU/mL) could be fully inactivated within 20 min. The primary reactive oxygen species (ROS) responsible for TR E. coli inactivation in the Fe3O4 @MoS2/PS system were hydroxyl radicals (•OH) and superoxide radicals (•O2-). Remarkably, the efflux pump protein was targeted and damaged by the generated ROS during the inactivation process, resulting in cell membrane rupture and efflux of cell content. Additionally, the horizontal transmission ability of residual antibiotic resistance genes (ARGs) harboring in the TR E. coli was also reduced after the inactivation treatment. This study offers an efficient approach for TR E. coli inactivation and substantial mitigation of antibiotic resistance dissemination risk.

In-situ preparation of lignin/Fe3O4 magnetic spheres as bifunctional material for the efficient removal of metal ions and methylene blue

In this paper, magnetic composite of lignin/Fe3O4 spheres were synthesized via a straightforward one-step in-situ solvothermal method showing good capacity for adsorbing heavy metal ions and dyes. The physicochemical properties of lignin/Fe3O4 spheres are analyzed using a range of techniques such as SEM, XRD, FTIR, VSM, TG, and BET. Lignin/Fe3O4 spheres exhibited high adsorption capacities of 100.00, 353.36 and 223.71 and 180.18 mg/g for Cu (II), Ni (II) and Cr (VI) metal ions and methylene blue (MB) with equilibrium attained within 60 min. After the recycling experiments, lignin/Fe3O4 spheres still possesses excellent superparamagnetic properties and displays high adsorption capacity. The lignin/Fe3O4 spheres are an efficient and continuous adsorbent to remove heavy metal ions of Cu (II), Ni (II), Cr (VI) and cationic dyes of methylene blue in wastewater, which proves the great potential in practical pollutants treatment applications for water systems.

Exploring the mechanism of norfloxacin removal and active species evolution by coupling persulfate activation with biochar hybridized Fe3O4 composites

In situ growth of dispersed active sites on substrates is a strategy for designing highly efficient catalysts for sulfate radical (SO4•-)-based advanced oxidation processes (SR-AOPs). Here, magnetic biochar composite (Fe3O4/BC) was fabricated as an activator to trigger PDS (peroxydisulfate) for norfloxacin (NOR) removal, achieving reliable NOR removal efficiency (>90%) within 10 min. Based on the synergistic effect between Fe3O4 and BC, the removal rate increases to 0.0265 L mg-1 min-1. Fe3O4/BC exhibited decent adaptability, stability, and recyclability toward affecting factors variation during PDS activation, attributed to the synergistic effect between Fe3O4 and BC. The electron transfer of magnetic Fe3O4 coupled with the adsorption and conduction function of carbon skeleton, which overcomes typical problems as crystal agglomeration, metal leaching, and catalysts recovery etc. The electron-rich Fe(II) sites promote the radical pathway by generating reactive oxygen species (ROS, •OH, SO4•- and O2•-), and radicals evolution contributing to the form of 1O2 in non-radical pathway. Under the effect of multipath in NOR degradation, HPLC-QTOF-MS spectroscopy and DFT calculation revealed the possible degradation pathway of NOR. In addition, according to toxicity prediction, the overall NOR contamination toxicity of NOR was effectively alleviated by Fe3O4/BC + PDS system. Overall, this study presents a promising composite in PDS activation and views the active species evolution in the NOR removal system, which is crucial for mechanism study in relevant research in the future.

An integrated approach to remove endocrine-disrupting chemicals bisphenol and its analogues from the aqueous environment: a review

Bisphenol A (BPA) is a well-known endocrine-disrupting chemical (EDC) used as a plastic enhancer in producing polycarbonate resins to manufacture hard plastics. Due to strict limitations on the manufacturing and utilization of BPA, several bisphenol substitutes, bisphenol F (BPF), bisphenol S (BPS), and bisphenol AF (BPAF), have been developed to replace it in various applications. Because of their widespread use in food containers, infant bottles, and reusable water bottles, bisphenols (BPs) have been identified in different environmental circumstances, including drinking water, seawater, industrial effluent, and endocrine systems such as human blood, urine, and breast milk. However, locating and analyzing them in different conditions has proven to be challenging. Therefore, there is a need to reduce the prevalence of BPs in the environment. The significance of advanced treatment options for treating and eliminating BPA and its alternatives from water bodies are reviewed. Also, the research gaps and future scopes are discussed in this review article. According to the literature survey, adsorption and photocatalytic degradation provide synergistic benefits for environmental challenges because of their substantial adsorption Q5 capacity, high oxidation capability, and low cost compared to alternative individual treatment options.

Microwave disinfection strengthened by a biochar-based microwave absorbing material for sewage resource utilization

Proper disinfection treatment is the basic guarantee for safe utilisation of sewage. However, the commonly used disinfection methods are not suitable for nutrients containing reclaimed water. In this work, the microwave disinfection method assisted by a microwave-absorbing material in recycled water samples was investigated. Magnetic corn stalk biochar (MCSB), the microwave absorbing material, was prepared by high temperature carbonisation of corn stalk particles impregnated with ferrous sulfate. Escherichia coli and fecal coliforms were selected as target microorganisms to investigate the disinfection efficiency of MCSB assisted microwave radiation (MW/MCSB). The addition of microwave absorbing materials significantly improves the disinfection effect of water samples. Compared with the microwave radiation (MW) without MCSB, the bactericidal rate by using 107 CFU/L E. coli suspension increased from 63.5% to 100% at 480 W for 30 s after adding 4 g/L MCSB. Besides, the effects of MCSB dosage, microwave power, microwave radiation time, and initial bacterial concentration on disinfection efficiency were explored. Moreover, the bactericidal efficiency for actual sewage samples was also demonstrated by treating the effluent from septic tank sewage. The residual fecal coliforms in treated water samples met China's farmland irrigation water standard (GB 5084-2021). The result indicates that the proposed method of microwave disinfection strengthened by MCSB has a promising application prospect for reclaimed water disinfection.

Wood induced preparation of Fe3C decorated biochar for peroxymonosulfate activation towards bisphenol a degradation with low ion leaching

Heterogeneous iron/persulfate system suffers from the problems of high ion leaching, severe catalyst surface corrosion and low performance stability. Herein, a series of iron compound incorporated N doped biochar composite catalysts were prepared from pyrolyzing wood powder and ferric ferrocyanide mixture, which were used for bisphenol A (BPA) degradation in water through peroxymonosulfate (PMS) activation. It was found that the reducing gases released from wood powder at different pyrolysis temperature significantly affected the crystalline phase of the iron compound in the catalyst, in which pure phase iron carbide (Fe₃C) decorated N doped biochar was obtained at pyrolysis temperature of 600 °C or higher. Wood powder was introduced as both Fe₃C formation inductive agent and biochar precursor. Fe₃C/biochar exhibited optimal BPA degradation performance, in which 0.5 g/L of catalyst could completely degrade 0.05 mM BPA within 30 min. Radical, high valent iron-oxo, and non-radical species were all generated in the reaction system by both Fe₃C and N doped biochar, respectively. Moreover, the multi-valence nature of Fe in Fe₃C enabled the reaction system with remarkably reduced Fe ion leaching and negligible iron sludge production since Fe₃C could activate PMS through a heterogeneous mechanism. Having multiple active species generated for BPA degradation, the prepared catalyst also showed promising adaptability and recyclability. This study can provide a new solution for the design of iron based catalyst/PMS system for organic pollutant degradations with low ion release.

Efficient photocatalytic degradation of tetracycline using magnetic biochar derived by iron-rich sludge

Industrial wastewater treatment processes produce a large quantity of iron-rich sludge due to the extensive utilization of iron salt reagent. Reuse of iron-rich sludge is an attractive route for excess sludge disposal and management. In this study, sludge-derived magnetic photocatalyst was prepared using industrial iron-rich sludge as raw materials for the first time. The photocatalytic degradation system constructed by the sludge-derived photocatalysts were evaluated using tetracycline (TC) as the target contaminant, achieving a high degradation rate of 98.3% within 5 h under optimal conditions. Major reactive oxygen species in the photocatalytic systems were investigated using radical quenching experiments and electron paramagnetic resonance spectroscopy. The results suggested that •OH and O2•- were activated by photogenerated electrons and holes, respectively. Moreover, bound persistent free radicals induced by quinone-like structure in sludge-derived biochar were the predominant factors affecting radical 1O2 formation under the light irradiation. The reactive oxygen species of •OH, O2•-, and 1O2 played main roles in the degradation of TC. The used magnetic biochar can be effectively separated and recovered in aqueous solutions by the magnetism. This method provides a new cost-effective strategy for antibiotics removal from aqueous solution.

Degradation of tetracycline by peroxymonosulfate activated with Mn0.85Fe2.15O4-CNTs: Key role of singlet oxygen

Tetracycline (TC) is a kind of electron-rich organic, and singlet oxygen (¹O₂) oxidative pathway-based advanced oxidation processes (AOPs) have represented outstanding selective degradation to such pollutants. In this paper, an excellent prepared strategy for ¹O₂ dominated catalyst was adopted. A catalyst composed of non-stoichiometric doping Mn-Fe bimetallic oxide supported on CNTs (0.3-Mn_0.85Fe_2.15O₄-CNTs) was synthesized and optimized by regulating the non-stoichiometric doping ratio of Mn & Fe and the loading amount of CNTs. Through optimization and control experiments, the optimized catalyst represented 94.9% of TC removal efficiency within 60 min in neutral condition under relatively low concentrations of Mn_0.85Fe_2.15O₄-CNTs (0.4 g/L) and PMS (0.8 mM). Through SEM and XRD characterization, Mn_0.85Fe_2.15O₄-CNTs was a hybrid of cubic Mn_0.85Fe_2.15O₄ uniformly dispersing on CNTs. By the characterization of XPS and FT-IR, more CO bonds and low-valent Mn (II) & Fe (II) appeared in Mn_0.85Fe_2.15O₄-CNTs. Reactive oxygen species (ROS) was determined by radical quenching experiments and electron spin resonance (EPR) spectroscopy, and ¹O₂ was verified to be the dominated ROS. The mechanism for PMS' activation was speculated, and more low-valent Mn (II) and Fe (II) contributed to the production of free-radical (•OH & SO₄^•-), while the reaction between PMS and the enhanced CO bond on Mn_0.85Fe_2.15O₄-CNTs played a crucial part in the generation of ¹O₂. In addition, through the comparative degradation of four different organics with distinct charge densities, the excellent selectivity of ¹O₂-based oxidative pathway to electron-rich pollutants was found. This paper supplied a good strategy to prepare catalyst for PMS activation to form a ¹O₂-dominated oxidative pathway.

Phase Evolution on the Hydrogen Adsorption Kinetics of NiFe-Based Heterogeneous Catalysts for Efficient Water Electrolysis

Transition metal layered double hydroxides, especially nickel-iron layered double hydroxide (NiFe-LDH) shows significant advancement as efficient oxygen evolution reaction (OER) electrocatalyst but also plays a momentous role as a precursor for NiFe-based hydrogen evolution reaction (HER) catalysts. Herein, a simple strategy for developing Ni-Fe-derivative electrocatalysts via phase evolution of NiFe-LDH under controllable annealing temperatures in an argon atmosphere is reported. The optimized catalyst annealed at 340 ^o C (denoted NiO/FeNi₃ ) exhibits superior HER properties with an ultralow overpotential of 16 mV@10 mA cm^-2 . Density functional theory simulation and in situ Raman analyses reveal that the excellent HER properties of the NiO/FeNi₃ can be attributed to the strong electronic interaction at the interface of the metallic FeNi₃ and semiconducting NiO, which optimizes the H₂ O and H adsorption energies for efficient HER and OER catalytic processes. This work will provide rational insights into the subsequent development of related HER electrocatalysts and other corresponding compounds via LDH-based precursors.

Applications of biochar in sulfate radical-based advanced oxidation processes for the removal of pharmaceuticals and personal care products

Recently, biochar (BC) has been increasingly used as a catalyst for the degradation of 'emerging pollutants' (EPs). Pharmaceuticals and personal care products (PPCPs), which come under 'EPs', can be harmful to the aquatic ecosystem despite being present in very low concentrations (ng/L-μg/L). Advanced oxidation processes (AOPs), which produce sulfate radical (SR-AOPs), show a great potential to degrade PPCPs effectively from wastewater. It is mainly due to the higher stability, long half-lives and better non-selectivity of SO₄^{• -} compared with AOPs with •OH generation. Furthermore, research focus is now given on AOPs coupled with BC-supported catalyst to enhance the degradation of PPCPs because of quicker generation of radicals (•OH, SO₄^•-) by the activation of persulfate (PS) and peroxymonosulfate (PMS). This article sheds light on the catalytic ability of BC after its physical and chemical modifications such as acid/alkali treatment and metal doping. The role of persistent free radicals (PFRs) in the BC for effective removal of PPCPs has been elaborated. Its potential applications in synthetic as well as real wastewater have also been discussed.

Rapid removal of high-concentration Rhodamine B by peroxymonosulfate activated with Co3O4-Fe3O4 composite loaded on rice straw biochar

In this study, rice straw biochar modified with Co₃O₄-Fe₃O₄ (RSBC@Co₃O₄-Fe₃O₄) was successfully prepared via calcinating oxalate coprecipitation precursor and employed as a catalyst to activate peroxymonosulfate (PMS) for the treatment of Rhodamine B (RhB)-simulated wastewater. The results indicated that RSBC@Co₃O₄-Fe₃O₄ exhibited high catalytic performance due to the synergy between Co₃O₄ and Fe₃O₄ doping into RSBC. Approximately 98% of RhB (180 mg/L) was degraded in the RSBC@Co₃O₄-Fe₃O₄/PMS system at initial pH 7 within 15 min. The degradation efficiency of RhB maintained over 90% after the fourth cycle, illustrating that RSBC@Co₃O₄-Fe₃O₄ displayed excellent stability and reusability. The primary reactive oxygen species (ROS) answerable for the degradation of RhB were ¹O₂, •OH, and SO₄^•-. Moreover, the intermediates involved in the degradation of RhB were identified and the possible degradation pathways were deduced. This work can provide a new approach to explore Co-based and BC-based catalysts for the degradation of organic pollutants.

One-step preparation of lignin-based magnetic biochar as bifunctional material for the efficient removal of Cr(VI) and Congo red: Performance and practical application

The lignin-based magnetic biochar (LMB) was fabricated with a facile one-step solvothermal method. The spherical Fe₃O₄ was successfully loaded on the lignin-based biochar. LMB could efficiently remove Cr(VI) and Congo red (CR) synergistically with the adsorption of biochar and the catalytic/reduction of Fe₃O₄. LMB showed a removal efficiency of 100 % for Cr(VI) (100 mg/L) at 30 min. The LMB could be a catalyst to activate persulfate (PS) to degrade CR. The LMB + PS system showed a removal efficiency of 94.3 % for CR at 60 min. Moreover, LMB could simultaneously remove 41.5 % of Cr(VI) and 91.5 % of CR in the mixed Cr(VI) and CR solution. The simulated wastewater studies showed that LMB exhibited superior high Cr(VI) (100 %) and CR (82 %) removal efficiencies with the coexistent of anions, cations, and organic matter. LMB can be effectively applied to remove Cr(VI) and CR and purify different contaminated water bodies.

Sulfate radicals-based advanced oxidation processes for the degradation of pharmaceuticals and personal care products: A review on relevant activation mechanisms, performance, and perspectives

Owing to the rapid development of modern industry, a greater number of organic pollutants are discharged into the water matrices. In recent decades, research efforts have focused on developing more effective technologies for the remediation of water containing pharmaceuticals and personal care products (PPCPs). Recently, sulfate radicals-based advanced oxidation processes (SR-AOPs) have been extensively used due to their high oxidizing potential, and effectiveness compared with other AOPs in PPCPs remediation. The present review provides a comprehensive assessment of the different methods such as heat, ultraviolet (UV) light, photo-generated electrons, ultrasound (US), electrochemical, carbon nanomaterials, homogeneous, and heterogeneous catalysts for activating peroxymonosulfate (PMS) and peroxydisulfate (PDS). In addition, possible activation mechanisms from the point of radical and non-radical pathways are discussed. Then, biodegradability enhancement and toxicity reduction are highlighted. Comparison with other AOPs and treatment of PPCPs by the integrated process are evaluated as well. Lastly, conclusions and future perspectives on this research topic are elaborated.

Improved Cr (VI) adsorption performance in wastewater and groundwater by synthesized magnetic adsorbent derived from Fe3O4 loaded corn straw biochar

This work developed an easy method to utilize corn straw (CS) waste for sustainable development and reduce the volume of waste volume as well as bring value-added. The magnetic adsorbent was prepared by loading Fe₃O₄ onto biochar derived from corn straw (Fe@CSBC), then used for capturing Cr (VI) in groundwater and wastewater samples. The characterization of adsorbents showed that Fe3O4 was successfully loaded on corn straw biochar (CSBC) and contributed to the improvement of the surface area, and surface functional groups like Fe-O, Fe-OOH, CO, and O-H. The presence of iron oxide was further confirmed by XPS and XRD analysis and a magnetization value of 35.6 emu/g was obtained for Fe@CSBC. The highest uptake capacity of Cr (VI) onto Fe@CSBC and CSBC by monolayer were 138.8 and 90.6 mg/g, respectively. By applying magnetic adsorbent Fe@CSBC for the treatment of groundwater and wastewater samples, the chromium could be removed up to 90.3 and 72.6%, respectively. The remaining efficiency of Cr (VI) was found to be 84.5% after four times reused Fe@CSBC, demonstrating the great recyclable ability of the adsorbent. In addition, several interactions between Cr (VI) and Fe@CSBC like ion exchange, complexation, and reduction reaction were discussed in the proposed adsorption mechanism. This study brings an efficient method to turn corn straw biomass into an effective magnetic adsorbent with high adsorption performance and good reusability of Cr (VI) in groundwater as well as in wastewater.

A Review of Persulfate Activation by Magnetic Catalysts to Degrade Organic Contaminants: Mechanisms and Applications

All kinds of refractory organic pollutants in environmental water pose a serious threat to human health and ecosystems. In recent decades, sulfate radical-based advanced oxidation processes (SR-AOPs) have attracted extensive attention in the removal of these organic pollutants due to their high redox potential and unique selectivity. This review first introduces persulfate activation by magnetic catalysts to degrade organic contaminants. We present the advances and classifications in the generation of sulfate radicals using magnetic catalysts. Subsequently, the degradation mechanisms in magnetic catalysts activated persulfate system are summarized and discussed. After an integrated presentation of magnetic catalysts in SR-AOPs, we discuss the application of persulfate activation by magnetic catalysts in the treatment of wastewater, landfill leachate, biological waste sludge, and soil containing organic pollutants. Finally, the current challenges and perspectives of magnetic catalysts that activated persulfate systems are summarized and put forward.

Mechanisms and influencing factors for electron transfer complex in metal-biochar nanocomposites activated peroxydisulfate

The mechanisms and influencing factors for electron transfer complex need to be further studied by comparing radical and nonradical pathways. Herein, metal-biochar (BC) nanocomposites including CuO/BC, Fe₃O₄/BC and ZnO/BC were prepared to activate peroxydisulfate (PDS) for bisphenol A (BPA) degradation. The existence of electron transfer complex in CuO/BC-PDS system were directly demonstrated. Whereas radical pathway was dominant in Fe₃O₄/BC- and ZnO/BC-PDS systems for BPA degradation. There was a relationship between PDS adsorption and catalytic reaction. The rate-limiting step for BPA degradation in nonradical pathway was PDS adsorption, but in radical pathway was BPA degradation. Interestingly, among metal-BC, CuO/BC had the most effective performance in transformation of adsorbed PDS to electron transfer complex via out-sphere complexation. After pretreatment by PDS solutions, the separated CuO/BC achieved an efficiency of 60% in ensuing BPA degradation without re-addition of PDS. In addition, the activity of electron transfer complex in BPA degradation (k_obs > 0.0480 min^-1) was not affected by water matrix (e.g., Cl^-, HCO₃^-, natural organic matter (NOM) and actual water bodies), but affected by solution property (i.e., dissolved oxygen and conductivity) and oxidant species. Moreover, in BPA degradation process, nonradical pathway exhibited lower ecotoxicity instead of radical pathway.

High-bioactivity microfluidic immunosensing platform for electrochemiluminescence determination of CYFRA 21-1 with the introduction of Fe3O4@Cu@Cu2O

Relying on the electrochemiluminescence (ECL) and microfluidic technology, an immunosensor chip with high bioactivity was designed for sensitive determination of cytokeratin 19 fragment 21-1 (CYFRA 21-1). The mesoporous nanomaterial Fe₃O₄@Cu@Cu₂O as the co-reaction accelerator was used to catalyze the S₂O₈^2- to produce more SO₄^•- to achieve the amplification of the ECL signal. In fact, the generating of SO₄^•- could not only be done with the aid of the reversible cycles of Fe²⁺ and Fe³⁺ and Cu⁺ and Cu²⁺, but could be achieved also through the catalase-like function of Fe₃O₄. What is more, it has also been proved that Fe₃O₄@Cu@Cu₂O exhibited better catalytic performance than single Fe₃O₄, Cu₂O, and Cu@Cu₂O, which supported its application in this system. In addition, a portable microfluidic immunosensor chip for CYFRA 21-1-sensitive determination was assembled, which showed high selectivity, sensitivity, and strong universality in clinical cancer screening and diagnosis. It should be noted that HWRGWVC (HWR) was introduced as the antibody fixator to improve the incubation and binding efficiency of the antibody, which increased the ECL intensity and improved the sensitivity of the immunosensor. This strategy provided a new idea for cancer identification and diagnosis in clinical medicine.

Peroxymonosulfate activation using heterogeneous catalyst Sr2FeO4 coated on SBA-15 for efficient degradation of antibiotic sulfapyridine

It is significant to explore the advanced oxidation process (AOP) for antibiotic degradation. Herein, a peroxymonosulfate (PMS) activator, Sr₂FeO₄/SBA-15 (SFS) heterogeneous catalyst, was synthesized by in situ growth of Sr₂FeO₄ on the surface of SBA-15. In SFS/PMS catalytic system, Sr atom provided electrons to Fe(II) ↔Fe(III) ↔Fe(II) redox cycle through Sr-O-Fe bonds for PMS activation. The SFS catalyst could activate PMS to generate a free radical coexistence system, including sulfate radical (SO₄∙^-) and hydroxyl radicals (∙OH). The catalyst possessed high catalytic activity and high stability. The degradation efficiency of sulfapyridine (SAD) over the SFS/PMS catalytic system could reach 99.0% after 90 min reaction. After the 5th reuse, the degradation efficiency of SAD was still more than 94.0%, and the phase structure of the catalyst did not alter. The low ion leaching concentration would be more conducive to reuse and avoiding secondary pollution, in comparison to homogeneous catalysts. This catalyst can be widely applied to organic wastewater treatment.-->.

Efficient Activation of Peroxymonosulfate by Cobalt Supported Used Resin Based Carbon Ball Catalyst for the Degradation of Ibuprofen

The extensive use of ibuprofen (IBU) and other pharmaceuticals and personal care products (PPCPs) causes them widely to exist in nature and be frequently detected in water bodies. Advanced catalytic oxidation processes (AOPs) are often used as an efficient way to degrade them, and the research on heterogeneous catalysts has become a hot spot in the field of AOPs. Among transitional metal-based catalysts, metal cobalt has been proved to be an effective element in activating peroxymonosulfate (PMS) to produce strong oxidizing components. In this study, the used D001 resin served as the matrix material and through simple impregnation and calcination, cobalt was successfully fixed on the carbon ball in the form of cobalt sulfide. When the catalyst was used to activate persulfate to degrade IBU, it was found that under certain reaction conditions, the degradation rate in one hour could exceed 70%, which was far higher than that of PMS and resin carbon balls alone. Here, we discussed the effects of catalyst loading, PMS concentration, pH value and temperature on IBU degradation. Through quenching experiments, it was found that SO4− and ·OH played a major role in the degradation process. The material has the advantages of simple preparation, low cost and convenient recovery, as well as realizing the purpose of reuse and degrading organic pollutants efficiently.

Cu-Doped magnetic loofah biochar for tetracycline degradation via peroxymonosulfate activation

The Cu-doped deactivated magnetic biochar exhibited high PMS activation to degrade TC with a high removal rate of 97.6%.