Activation of peroxydisulfate using N-doped carbon-encapsulated Ni species for efficient degradation of tetracycline

Highly efficient targeted adsorption and catalytic degradation of ciprofloxacin by a novel molecularly imprinted bimetallic MOFs catalyst for persulfate activation

Given the presence of emerging pollutants at low concentrations in water bodies, which are inevitably affected by background substances during the removal process. In this study, we synthesized molecularly imprinted catalysts (Cu/Ni-MOFs@MIP) based on bimetallic metal-organic frameworks for the targeted degradation of ciprofloxacin (CIP) in advanced oxidation processes (AOPs). The electrostatic interaction and functional group binding of CIP with specific recognition sites on Cu/Ni-MOFs@MIP produced excellent selective recognition (Qmax was 14.82 mg g-1), which enabled the active radicals to approach and remove the contaminants faster. Electron paramagnetic resonance (EPR) analysis and quenching experiments revealed the coexistence of ∙OH, SO42-, and 1O2, with ∙OH dominating the system. Based on experimental and theoretical calculations, the reaction sites of CIP were predicted and the possible degradation pathways and mechanisms of Cu/Ni-MOFs@MIP/PMS systems were proposed. This study opens up a new platform for the targeted removal of target pollutants in AOPs.

Enhancement of Peroxydisulfate Activation for Complete Degradation of Refractory Tetracycline by 3D Self-Supported MoS2/MXene Nanocomplex

Antibiotic abuse, particularly the excessive use of tetracycline (TC), a drug with significant environmental risk, has gravely harmed natural water bodies and even posed danger to human health. In this study, a three-dimensional self-supported MoS2/MXene nanohybrid with an expanded layer spacing was synthesized via a facile one-step hydrothermal method and used to activate peroxydisulfate (PDS) for the complete degradation of TC. The results showed that a stronger •OH signal was detected in the aqueous solution containing MoS2/MXene, demonstrating a superior PDS activation effect compared to MoS2 or Ti3C2TX MXene alone. Under the conditions of a catalyst dosage of 0.4 g/L, a PDS concentration of 0.4 mM, and pH = 5.0, the MoS2/MXene/PDS system was able to fully eliminate TC within one hour, which was probably due to the presence of several reactive oxygen species (ROS) (•OH, SO4•-, and O2•-) in the system. The high TC degradation efficiency could be maintained under the influence of various interfering ions and after five cycles, indicating that MoS2/MXene has good anti-interference and reusability performance. Furthermore, the possible degradation pathways were proposed by combining liquid chromatography-mass spectrometry (LC-MS) data and other findings, and the mechanism of the MoS2/MXene/PDS system on the degradation process of TC was elucidated by deducing the possible mechanism of ROS generation in the reaction process. All of these findings suggest that the MoS2/MXene composite catalyst has strong antibiotic removal capabilities with a wide range of application prospects.

Highly graphitized porous carbon/reduced graphene oxide for ultrahigh enrichment and ultrasensitive determination of polycyclic aromatic hydrocarbons

There is an urgent need to develop efficient and reliable coating materials for solid phase microextraction (SPME), in order to quantify and monitor pollutants in environmental waters. Herein, a highly graphitized porous carbon/reduced graphene oxide (PC/rGO) was successfully synthesized by pyrolysis of metal organic framework/graphene oxide precursors, and used as a SPME coating for ultrahigh enrichment of polycyclic aromatic hydrocarbons (PAHs) from water. The as-prepared PC/rGO exhibited high degree of graphitization, abundant number of micro/mesopores along with exceptional thermal stability, making it an ideal SPME coating material. The PC/rGO fiber offered an ultrahigh enrichment factor for PAHs (up to 126057), which could be attributed to the multiple interactions between the PC/rGO and PAHs, including hydrophobic and π-π interactions, partitioning, and mesopore filling effect. In the analysis of PAHs, the PC/rGO fiber showed a wide linearity (0.007-100 ng mL-1), low limits of detection (0.0005-0.005 ng mL-1), and good repeatability (RSDs <10.1%, n = 5) under optimized conditions. The established method was applicable for ultrasensitive determination of PAHs in different environmental waters and showed satisfactory recoveries. This study provides a novel way for constructing thermally stable SPME coating having efficient extraction performance.

Polydopamine-modified MOF-5-derived carbon as persulfate activator for aniline aerofloat degradation

Residual flotation chemicals in beneficiation wastewater seriously threaten local ecosystems, such as groundwater or soil, and must be treated effectively. Currently, the degradation of organic pollutants using nitrided MOFs-derived carbon to activate persulfate (PDS) has attracted considerable attention. Hence, we developed a new synthetic strategy to load dopamine hydrochloride (PDA) onto MOF-5-derived porous carbon (PC) to form NPC, and the degradation of a typical flotation Aniline aerofloat (AAF) at high salinity by a low dose of the NPC/PDS system was investigated. Several characterization analyses such as TEM, XRD, Raman, FT-IR and XPS demonstrated that the nitrogen-rich indolequinone unit in PDA provided nitrogen to PC during the pyrolysis process. This enabled the core-shell structure of NPC and the synergy among the multiple components to induce the AAF degradation by PDS over a wide pH scale in a short period of time. It was deduced that the degradation of AAF by the NPC-8/PDS system was a non-radical pathway dominated by 1O2, which relied mainly on the conversion of superoxide radicals (O2•-) and surface-bound radicals. Among them, the pyridine N in the sp2 hybrid carbon was considered as a possible active site. This non-radical pathway was resistant to pH changes and background substances in the water, and well overcame the inhibition of the reaction by natural organic substances and inorganic anions in natural water. In this study, A novel approach to the synthesis of homogeneous MOFs nuclear-derived porous carbon was proposed and the application of MOFs-derived porous carbon for AAF remediation of mineral processing wastewater was broadened.

Effect of activator/precursor mass ratio on sulfur-doped porous carbon for catalytic oxidation of aqueous organics with persulfate

Sulfur-doped porous carbon has emerged as promising metal-free catalysts toward persulfate (PS) for catalytic oxidation of aqueous organics. Wherein, thermal pyrolysis with activator activation is very common for the preparation of activated carbon. However, the relationship between the mass ratio of activator/precursor and catalytic efficiency has been rarely reported. Herein, a series of sulfur-doped porous carbons (S-AC) were synthesized by one-step chemical activation of (Poly(phenylene sulphide) (PPS)) with K₂CO₃ as activator at K₂CO₃/PPS mass ratio ranging from 0 to 3. The effects of K₂CO₃/PPS mass ratio on its physicochemical properties and its catalytic performance for p-chlorophenol (PCP) degradation with PS were comprehensively investigated. Experiment results show that sulfur doping enhanced its catalytic activity and the sample synthesized with K₂CO₃/PPS mass ratio of 2 (S-AC-2) exhibited the best adsorption and catalytic performance toward PS for PCP removal. More importantly, S-AC-2 with PS could efficiently degrade various aqueous toxic organics other than PCP, and S-AC-2 showed superior catalytic activity to many recently reported advanced materials. In addition, the effects of several operate parameters, including reaction temperature, PS concentration, pH, humic acid, and inorganic ions on PCP oxidation were evaluated. By combining with the results of quenching experiments and EPR, the PS activation mechanism over S-AC-2 was revealed. Moreover, the reusability and regenerability of S-AC-2 was also studied. It indicates that S-AC-2 showed inferior reusability, but the catalytic activity of which could be fully recovered through thermal treatment at 600 °C for 2 h in N₂.

Selective Degradation of Electron-Rich Organic Pollutants Induced by CuO@Biochar: The Key Role of Outer-Sphere Interaction and Singlet Oxygen

Efficient degradation of organic pollutants by oxidative radicals is challenging in the complex soil environment because of the invalid consumption of radicals by nontarget background substances and the generation of secondary halogenated organic pollutants. Nonradical-based oxidation is a promising pollutant removal method due to its high selectivity and environmental adaptability. Herein, a biochar-supported sheetlike CuO (e-CuO@BC) was developed, which exhibited efficient activation of peroxydisulfate (PDS) via nonradical pathways. The activation mechanisms were identified as (i) formation of surface-bonding active complexes via an outer-sphere interaction between e-CuO@BC and PDS and (ii) the continuous generation of ¹O₂ by the cycling of the Cu(I)/Cu(II) redox couple. In addition, the activation of PDS primarily occurred at the crystal facet (001) of e-CuO occupied by Cu atoms and was well facilitated by the Cu-O-C bond, which induced electron-rich centers around CuO. Two oxidative species from PDS activation, including surface-bonding active complexes and ¹O₂, showed a highly selective degradation toward electron-rich pollutants. Moreover, a highly efficient mineralization of organic pollutants and an effective inhibition on the generation of toxic byproducts (i.e., halogenated organics) was indicated by the intermediate and final degradation products. This study provides a comprehensive understanding of the heterogeneous activation process of PS by the e-CuO@BC catalyst for electron-rich organic pollutant removal.

Kill two birds with one stone: Selective and fast removal and sensitive determination of oxytetracycline using surface molecularly imprinted polymer based on ionic liquid and ATRP polymerization

Oxytetracycline (OTC) residue in food and environment has potential threats to ecosystem and human health, thus its sensitive monitoring and effective elimination are very important. In this work, a new molecularly imprinted polymer (MIP) composite was prepared through atom transfer radical polymerization by using OTC as template, gold nanoparticles modified carbon nanospheres (Au-CNS) as supporter, ionic liquids (IL) as functional monomer and cross-linking agent. The obtained MIP-IL@Au-CNS composite was characterized by Fourier transform infrared absorption spectroscopy, X-ray photoelectron spectroscopy, scanning electron microscopy and transmission electron microscopy. It displayed high imprinting factor (5.50) and adsorption capacity (56.7 mg g^-1), and could achieved the adsorption equilibrium in short time (about 15 min). Results also illustrated that the adsorption process basically conformed to the quasi-second-order kinetic model and Freundlich model, and MIP-IL@Au-CNS could be recycled at least 5 times. Furthermore, a sensitive OTC electrochemical sensor was developed by combining MIP-IL@Au-CNS with IL-modified carbon nanocomposites (IL@N-rGO-MWCNT). The resulting sensor demonstrated a linear response to OTC in the wide range of 0.02-20 μM, and the detection limit was down to 5 nM. It also had the advantages of high selectivity, fast elution/regeneration and simple construction procedure. The sensor had been applied to the detection of real samples, and acceptable recovery (96.4%-106%) and RSD (3.2%-6.2%) were obtained. This work expands the application of IL-based MIP in pollutant monitoring and enriching.

Carbon materials in persulfate-based advanced oxidation processes: The roles and construction of active sites

Many researchers have paid more attention to the progress of carbon materials owing to their advantages, such as high activity, low cost, large surface area, high conductivity and high stability. Carbon materials have been widely used in persulfate-based advanced oxidation processes (PS-AOPs), especially for graphene (G), carbon nanotubes (CNTs) and biochar (BC). Various strategies are applied to promote their activity, however, up to now, the relationship between the structures of carbon materials and their activities in PS-AOPs has not been specifically reviewed. The methods to switch reaction pathway (radical and nonradical pathways) in carbon-persulfate-based AOPs have not been systematically explored. Hereon, this review illustrated the active sites of G, CNTs, BC and other carbon materials, and generalized the modification methods to promote the activity of carbon materials and to switch reaction pathway in PS-AOPs. The roles of carbon materials in PS-AOPs were discussed around reactive oxygen species (ROS) and the structures. ROS are frequently complex in AOPs, but main ROS generation is related to the active sites on carbon materials. The structures of carbon materials (e.g., metal-carbon bonds, the electron-deficient C atoms, unbalanced electron distribution and graphitized structures) play a decisive role in the nonradical pathway. Finally, future breakthroughs of carbon materials were proposed for practical engineering and multi-field application.

Removal of aqueous pharmaceuticals by magnetically functionalized Zr-MOFs: Adsorption Kinetics, Isotherms, and regeneration

The functionalization of metal-organic frameworks (MOFs) is imperative and challenging for the development of practical MOF-based materials. Herein, a magnetically functionalized Zr-MOF (Fe₃O₄@MOF-525) was synthesized via secondary-growth approach to obtain an easily-separated and recyclable adsorbent for the removal of pharmaceuticals (tetracycline (TC) and diclofenac sodium (DF)). After loading Fe₃O₄ nanoparticles (NPs), due to the increase of micropore volume and specific surface area caused by defects, the adsorption performance of Fe₃O₄@MOF-525 was improved. The kinetics could be described by the pseudo-second-order kinetic model. The different adsorption capacity and initial rate were attributed to the properties of the pharmaceuticals, including the molecular size and hydrophobicity/hydrophilicity. In isotherm experiments, the maximum adsorption capacities of DF and TC on Fe₃O₄@MOF-525 calculated by Sips model reached 745 and 277 mg·g^-1, respectively. The thermodynamic studies indicated the adsorption was endothermic and spontaneous. The effect of pH suggested that electrostatic interaction, π-π interaction, anion-π interaction, and H-bonding were possibly involved in the adsorption process. The adsorbent was separated by magnetic and regenerated. Washed with ethanol, Fe₃O₄@MOF-525 remained about 80% adsorption capacity after four cycles. In-situ photo-regeneration under visible-light irradiation was another attractive method, where > 95% TC was degraded in 4 h. The reaction with scavengers revealed that ¹O₂ was the dominant reactive species in our system, indicating the occurrence of Type II photosensitization. The separability, excellent adsorption performance, and recyclability of Fe₃O₄@MOF-525 may lead to its beneficial applications in water treatment.

Synthesis and Encapsulation of Ajuga parviflora Extract with Zeolitic Imidazolate Framework-8 and Their Therapeutic Action against G+ and G- Drug-Resistant Bacteria

Infectious diseases caused by bacteria have become a public health issue. Antibiotic therapy for infectious disorders, as well as antibiotic overuse, has resulted in antibiotic-resistant bacterial strains. Zeolitic imidazolate framework-8 (ZIF-8) possesses a wide surface area, high porosity, variable functionality, and potential drug carriers. We have established a clear method for making a nanoscale APE@ZIF-8 nanocomposite agent with outstanding antibacterial activity against methicillin-resistant Staphylococcus aureus (MRSA) and cephalosporin-carbapenem-resistant Escherichia coli (CCREC). We present a unique approach for encapsulating molecules ofAjuga parviflora extract (APE) with ZIF-8. APE@ZIF-8 has a positive charge. By electrostatic contact with the negatively charged bacterial surface of S. aureus and E. coli, APE@ZIF-8 NPs produce reactive oxygen species (ROS) that damage bacterial cell organelles. As a result, the APE@ZIF-8 nanocomposite offers limitless application potential in the treatment of infectious disorders caused by drug-resistant gram-positive and gram-negative bacteria.