Effective separation of uranium(VI) from wastewater using a magnetic carbon as a recyclable adsorbent

Elucidating uranium interactions with synthetic Na-P1 zeolite/Ca2+-substituted alginate composite granules through batch and spectroscopic studies: Emphasizing the significance of ion exchange and complexation

Uranium, a key member of the actinides series, is radioactive and may cause severe environmental hazards once discharged into the water due to high toxicity. Removal of uranium via adsorption by applying tailored, functional adsorbents is at the forefront of tackling such pollution. Here, we report the optimized functionalization of the powder coal fly-ash (CFA) derived Na-P1 synthetic zeolite to the form of granules by employing the biodegradable polymer-calcium alginate (CA) and their application to remove aqueous U. The optimized synthesis showed that granules are formed at the CA concentration equals to 0.5 % wt., and that application of 1% wt. solution renders the most effective U scavengers. The maximum U adsorption capacity (qmax) increases significantly after CA modification from 44.48 mgU/g for native, powder Na-P1 zeolite to 62.53 mg U/g and 76.70 mg U/g for 0.5 % wt. and 1 % wt. CA respectively. The U adsorption follows the Radlich-Peterson isotherm model, being the highest at acidic pH (pHeq∼4). The U adsorption kinetics reveals swift U uptake, reaching equilibrium after 2h for 1 % ZACB and 3 h for 0.5 % wt. ZACB following the pseudo-second-order (PSO) kinetic model. SEM-EDXS investigation elucidates that adsorbed U occurs onto materials as an inhomogenous, well-dispersed, and micrometer-scale aggregate. Further, XPS and μ-XRF spectroscopies complementarily confirmed the hexavalent oxidation state of adsorbed U and its altered distribution on ZACBs with varying CA concentrations. U distribution was probed "in-situ" onto materials while correlations between the major elements (Al, Si, Ca, U) contributing to U scavenging were calculated and compared. Finally, a real-life coal mine wastewater (CMW) polluted by 238U and 228,226Ra was successfully purified, satisfying WHO guidelines after treatment using ZACBs. These findings offer new insights on successful yet optimized Na-P1 zeolite modification using biodegradable polymer (Ca2+-exchanged alginate) aimed at efficient U removal, displaying a near-zero environmental impact.

Tailoring chelating sites in two-dimensional covalent organic framework nanosheets for enhanced uranium capture

In this study, we intricately designed and synthesized two isoreticular two-dimensional covalent organic framework nanosheets, namely TAPA-COF-1 and TAPA-COF-2, distinguished by their unique spatial arrangement of hydroxyl groups. These precisely engineered nanosheets were employed as a tailored platform for the selective capture of uranium, due to their tunable chelating sites and characteristic sheet-like morphology. Notably, TAPA-COF-1, featuring ortho-hydroxyl groups, demonstrated a significantly enhanced adsorption capacity for uranium capture originating from the additional oriented adjacent phenolic hydroxyl chelating sites in comparison to TAPA-COF-2 with para-hydroxyl groups, which was proved by theoretical calculation. The impressive features of TAPA-COF-1, including its notable selectivity, rapid adsorption kinetics, and high uptake capacity (657.2 mg g-1), endow it as a highly promising candidate for uranium capture.

One-step synthesis of phospho-rich, silica-enhanced chitosan aerogel for the efficient adsorption of uranium(VI)

In this study, an amorphous silica reinforced, phosphoric-crosslinked chitosan foam (P-CTS@SixOy) was prepared. The introduction of amorphous silica not only increased the affinity of the adsorbent for uranium, but also improved the stability of the material. The number of active sites of P-CTS@SixOy was increased by the introduction of phosphate groups. The material exhibited excellent uranium adsorption performance with the removal capacity and efficiency of 850.5 mg g-1 and 98.1 %, respectively. After regenerations, the morphology of P-CTS@SixOy still maintained, and the uranium adsorption efficiency remained above 90 %, manifesting the excellent cycle performance of P-CTS@SixOy. In the dynamic adsorption experiment, P-CTS@SixOy successfully concentrated the volume of uranium-containing solution, and exhibited excellent uranium adsorption performance. The analysis of kinetics, isotherms, and thermodynamics manifested that the uranium adsorption behavior of P-CTS@SixOy was a spontaneous, endothermic, monolayer chemical adsorption process. X-ray photoelectron spectroscopy, Scanning Electron Microscope, and Fourier Transform Infrared Spectrometer were used to characterized the P-CTS@SixOy before and after adsorption, which demonstrated that the main interaction mechanism between uranium and P-CTS@SixOy was the complexation. These studies indicated the huge application prospect of P-CTS@SixOy in the treatment of large-scale uranium-containing wastewater.

Efficacy and mechanisms of δ-MnO2 modified biochar with enhanced porous structure for uranium(VI) separation from wastewater

Even though uranium (U) is considered to be an essential strategic resource with vital significance to nuclear power development and climate change mitigation, U exposure to human and ecological environment has received growing concerns due to its both highly chemically toxic and radioactively hazardous property. In this study, a composite (M-BC) based on Ficus macrocarpa (banyan tree) aerial roots biochar (BC) modified by δ-MnO2 was designed to separate U(VI) from synthetic wastewater. The results showed that the separation capacity of M-BC was 61.53 mg/g under the solid - liquid ratio of 1 g/L, which was significantly higher than that of BC (12.39 mg/g). The separation behavior of U(VI) both by BC and M-BC fitted well with Freundlich isothermal models, indicating multilayer adsorption occurring on heterogeneous surfaces. The reaction process was consistent with the pseudo-second-order kinetic model and the main rate-limiting step was particle diffusion process. It is worthy to note that the removal of U(VI) by M-BC was maintained at 94.56% even after five cycles, indicating excellent reusability and promising application potential. Multiple characterization techniques (e.g. Scanning Electron Microscope-Energy Dispersive Spectrometer (SEM-EDS), Fourier Transform Infrared Spectroscopy (FTIR), X-ray Diffraction (XRD), Brunauer-Emmett-Teller (BET) and X-ray Photoelectron Spectroscopy (XPS)) uncovered that U(VI) complexation with oxygen-containing functional groups (e.g. O-CO and Mn-O) and cation exchange with protonated ≡MnOH were the dominant mechanisms for U(VI) removal. Application in real uranium wastewater treatment showed that 96% removal of U was achieved by M-BC and more than 92% of co-existing (potentially) toxic metals such as Tl, Co, Pb, Cu and Zn were simultaneously removed. The work verified a feasible candidate of banyan tree aerial roots biowaste based δ-MnO2-modified porous BC composites for efficient separation of U(VI) from uranium wastewater, which are beneficial to help address the dilemma between sustainability of nuclear power and subsequent hazard elimination.

A comprehensive review on the ultrasound-enhanced leaching recovery of valuable metals: Applications, mechanisms and prospects

In recent two decades, ultrasound has been broadly applied to the hydrometallurgical leaching process to recover valuable metals within raw materials, aiming to solve the shortcomings of the conventional leaching process, including relatively low leaching recovery, long leaching duration, high reagent usage, high energy consumption and so on. The present work focuses on a comprehensive overview of the ultrasound-enhanced leaching of various metals, such as common nonferrous and ferrous metals, rare metals, rare earth elements, and precious metals, from raw metal ores and secondary resources. Moreover, the enhanced leaching mechanisms by ultrasound are discussed in detail and summarized based on the improvement of leaching kinetics, enhancement of the mass transfer and diffusion of lixiviants, and promotion of the oxidative conversion of metals from insoluble to soluble states. Lastly, the challenges and outlooks of future research on the leaching recovery for valuable metals with the assistance of ultrasound irradiation are proposed.

Construction of dopamine supported Mg(Ca)Al layered double hydroxides with enhanced adsorption properties for uranium

A novel dopamine-supported Mg(Ca)Al layered double hydroxide composite was synthesized by co-precipitation method. The existence of Ca²⁺ and dopamine could promote the capture of uranium on the layered double hydroxides. In batch experiments, the composite exhibited good uranium removal performance, including high adsorption capacity (687.3 mg/g), strong anti-interference and good reusability (the removal percentage was still higher than 90 % after five cycles). At low initial uranium concentration, the uranium removal percentage on the composite exceeded 99.7 % and the residual concentration of uranium in the solution was <0.03 mg/L, reaching the limited standard of the World Health Organization. The studies of adsorption kinetics and isotherm indicated that the uranium adsorption behavior on the composite conformed to the pseudo-second-order kinetic and Langmuir isotherm models, suggesting that the process was a monolayer adsorption dominated by chemical adsorption. Furthermore, the high-efficiency uranium adsorption on the Mg(Ca)Al layered double hydroxide was mainly attributed to the strong complexation between the active sites (-OH and -NH₂) and uranium, the precipitation of interlayer intercalation ions (CO₃^2- and OH^-) to uranium and the ion exchange of Ca²⁺ to uranium. Due to these advantages, the dopamine-supported Mg(Ca)Al layered double hydroxide composite is expected to be used as fine adsorbent to remove uranium from wastewater.

Highly selective extraction of uranium from wastewater using amine-bridged diacetamide-functionalized silica

A major environmental concern related to nuclear energy is wastewater contaminated with uranium, thus necessitating the development of pollutant-reducing materials with efficiency and effectiveness. Herein, highly selective mesoporous silicas functionalized with amine-bridged diacetamide ligands SBA-15-ABDMA were prepared. Different spectroscopy techniques were used to probe the chemical environment and reactivity of the chelating ligands before and after sorption. The results showed that the functionalized SBA-15-ABDMA had a strong affinity for uranium at low pH (pH = 3) with desirable sorption capacity (68.82 mg/g) and good reusability (> 5). It showed excellent separation performance with a high distribution coefficient (K_d,U > 10⁵ mL/g) and separation factors SF_U/Ln > 1000 at a pH of 3.5 in the presence of lanthanide nuclides, alkaline earth metal and transition metal ions. In particular, SiO₂spheres-ABDMA was used as a column material, which achieved excellent recovery of U(VI) (> 98%) and good reusability for samples of simulated mining and nuclear industries wastewater. XPS and crystallography studies clearly illustrated the tridentate coordination mode of U(VI)/PEABDMA and the mechanism and origin behind the high selectivity for U.

Easily synthesized mesoporous aluminum phosphate for the enhanced adsorption performance of U(VI) from aqueous solution

High-yield selective adsorbents and suitable modification methods are both significant for the efficient treatment of U-contaminated wastewater. In this work, a rich-mesoporous aluminum phosphate adsorbent (APO-10) was synthesized by simply increasing the mass of reactants under a fixed solvent volume. After increasing the mass of reactants ten times, APO-10 has the added defect level, the increased specific surface area, and mesoporous structure, and the increased number and enhanced adsorption ability of adsorption active sites (phosphorus-oxygen groups) on the surface, resulting in an enhanced adsorption performance of U(VI) in various environmental conditions. Its ultrahigh adsorption capacity calculated by the Langmuir model can reach 826.44 mg g^-1 at pH = 5.5 and T = 298 K. Its crystal structure did not change after adsorption and remained at 584.40 mg g^-1 after 6 cycles. Additionally, APO-10 shows an excellent uranium-selectivity over 68% from a mixed aqueous solution and has excellent applicability in the acidic and alkaline environment based on dynamic adsorption and desorption column experiments. This study not only provides a high-yield efficient selective adsorbent (APO-10) with excellent anti-radiation structure stability for the treatment of radioactive contamination but also provides a feasible modification method by simply increasing the mass of reactants.

Theoretical and experimental investigations of enhanced uranium(VI) adsorption by nitrogen doping strategy

With the ongoing development and utilization of nuclear energy, uranium pollution has become an increasingly serious issue. Although many adsorbents are able to remove hexavalent uranium (U(VI)) from aqueous solution,...