A novel covalent organic polymer with hierarchical pore structure for rapid and selective trace Hg(II) removal from drinking water

Thiolated non-conjugated nano polymer network for advanced mercury removal from water

Developing advanced adsorbents for selectively deducing mercury (Hg) in water to one billionth level is of great significance for public health and ecological security, but achieving the balance among efficiency, cost and environmental friendliness of adsorbents still faces enormous challenges. Herein, we present a high thiol content non-conjugated nano polymer network (PVB-SH) through simple microemulsion polymerization for efficient Hg ion (Hg(II)) removal. The PVB-SH is prepared by conventional commercial reagents and does not consume toxic organic solutions. This nano network reveals uniformly distributed nano sizes, leading to good accessibility of adsorption sites. The long and flexible polymer chains in the network allow two thiol sites to coordinate with one Hg(II), displaying significantly stronger binding than 1:1 coordination. Therefore, PVB-SH shows high affinity toward Hg(II) (Kd = 3.04 × 107 mL/g) and can selectively reduce Hg(II) in water to extremely low level of 0.14 μg/L, well below the safe limit of 2 μg/L. PVB-SH possesses excellent renewability (removal efficiency = 99.58 % after 10 regenerations), good resistance to various environmental factors (pH, ions and organic matter) and long-term stability in acid, alkali, and salt solutions. Impressively, PVB-SH is further made into a membrane by simple phase-inversion and can effectively purify 1592.4 L/m2 Hg(II) polluted drinking water before the breakthrough point of 2 μg/L. These results demonstrate the good practical potential of PVB-SH for decontamination of Hg from aqueous media.

Multi-ligand strategy for enhanced removal of heavy metal ions by thiol-functionalized defective Zr-MOFs

Given the significant global concern about heavy metal pollution, the development of effective adsorbents to capture pollutants has become an urgent issue. In this work, thiol-functionalized defective Zr-MSA-DMSA was designed by mixing 2,3-dimercaptosuccinic acid and mercaptosuccinic acid, which was applied for the rapid and efficient removal of M(II) (i.e., Pb(II), Hg(II), Cd(II)) from wastewater. Zr-MSA-DMSA exhibited excellent adsorption performance, and the maximum adsorption capacities for Pb(II), Hg(II), and Cd(II) were 715.2 mg g-1, 862.7 mg g-1, and 450.5 mg g-1. In actual wastewater, Zr-DMSA-MSA exhibited up to 97 % M(II) removal efficiency and excellent anti-interference ability. It also maintained good structural stability after five adsorption/regeneration cycles. Thus, the abundant oxygen vacancies and unsaturated adsorption sites on Zr-MSA-DMSA significantly improved the adsorption performance of M(II). Spectral analysis and DFT calculations confirmed that Zr-MSA-DMSA mainly relied on the coordination of sulfur and oxygen atoms, electrostatic attraction and a large number of defective sites to achieve the adsorption of M(II). Fixed bed experiments showed that Zr-MSA-DMSA exhibited a depletion time of 10500 min and a volume of 7.0 L. In summary, Zr-MSA-DMSA holds significant potential for treating heavy metal wastewater and provides potential applications for defect engineering.

Comparison of Double-Stranded DNA at the 5' and 3' Ends of the G-Triplex and Its Application in the Detection of Hg(II)

Leveraging the fluorescence enhancement effect of the G-triplex (G3)/thioflavin T (ThT) catalyzed by the adjacent double-stranded DNA positioned at the 5' terminus of the G3, the G3-specific oligonucleotide (G3MB6) was utilized to facilitate the rapid detection of mercury (Hg(II)) through thymine-Hg(II)-thymine (T-Hg(II)-T) interactions. G3MB6 adopted a hairpin structure in which partially complementary strands could be disrupted with the presence of Hg(II). It prompted the formation of double-stranded DNA by T-Hg(II)-T, inducing the unbound single strand of G3MB6 to spontaneously form a parallel G3 structure, producing a solid fluorescence signal by ThT. Conversely, fluorescence was absent without Hg(II), since no double strand and formation of G3 occurred. The fluorescence intensity of G3MB6 exhibited a positive correlation with Hg(II) concentrations from 17.72 to 300 nM (R2 = 0.9954), boasting a notably low quality of limitation (LOQ) of 17.72 nM. Additionally, it demonstrated remarkable selectivity for detecting Hg(II). Upon application to detect Hg(II) in milk samples, the recovery rates went from 100.3% to 103.2%.

Bottom-up synthesis of a sulfhydryl-modified heteroporous covalent organic framework for ultrafast removal of trace Hg(Ⅱ) from water

The development of functionalized covalent organic frameworks (COFs) is crucial in expanding their potential for removing toxic heavy metals from drinking water. Here, a new sulfhydryl-modified heteroporous COF (COFDBD-BTA) was prepared using a "bottom-up" approach in which a direct amine-aldehyde dehydration condensation between 2,5-diamino-1,4-benzenedithiol dihydrochloride (DBD) and [1,1'-biphenyl]-3,3',5,5'-tetracarbaldehyde (BTA) was occurred. The COFDBD-BTA featured a hexagonal kagome (kgm) structure and a sheet-like morphology. Notably, COFDBD-BTA contained densely S atoms that provided high-density Hg(II) adsorption sites for efficient and selective trace Hg(II) removal. COFDBD-BTA exhibited excellent performance in rapidly removing trace Hg(II) from 30 μg L-1 to 0.71 μg L-1 within 10 s, below the World Health Organization's allowable limit of 1 μg L-1. Additionally, COFDBD-BTA exhibited a high Hg (Ⅱ) removal level from water, achieving adsorption capacity of 687.38 mg g-1. Furthermore, the adsorbent exhibited a wide range of applicability for low concentration (6-500 μg L-1) Hg (Ⅱ), a simple and feasible regeneration method, and strong Hg(II) removal ability in real tap water systems. The excellent adsorption efficiency, outstanding recyclability, and one-step room temperature synthesis make S-rich COFDBD-BTA a promising candidate for eliminating Hg (Ⅱ) from drinking water.

Cellulose-based adsorbent using in mercury detection and removal from water via an efficient grafting strategy of fluorometric sensors by click reaction

Mercury pollution in waters attracts lots of attention due to its serious toxicity and high bioenrichment and many efforts have been devoted in the development of adsorbents for mercury detection and removal. Herein, a cellulose-based adsorbent Cell-TriA-HQ is functionalized with quinoline fluorophore by covalent immobilization through "Click reaction" with high yield. In addition to the admirable adsorptive performance, the prepared adsorbent exhibits excellent selectivity and sensitivity towards Hg (II) in water that the detection limit for Hg (II) is determined to be as low as 1.92 × 10-7 M. The sensitive fluorescence enhancement response is considered to be resulted from the inhibition of photo-induced electron transfer between triazole and quinoline groups and the reinforcement of structural rigidity. The easy manipulation along with excellent performance of adsorption capacity, detective ability and reusability for the multifunctional adsorbent makes it potential in mercury monitoring and removal from aqueous solutions in the field of water treatment.

Efficient and selective capture of various mercury species from water using an exfoliated thiocellulose

The primary challenge in mercury (Hg) adsorbents for large-scale practical applications is to achieve the balance between performance and economy. This work attempts to address this issue by synthesizing an exfoliated thiocellulose (CU-SH) with high thiol density and hierarchical porosity using in-situ ligands grafting combined with chemical stripping. The prepared CU-SH shows remarkable physical stability and chemical resistance, and the micron sized fiber is conducive to separation from water. Hg(II) adsorption tests in water demonstrate that CU-SH has broad working pH range (1-12), fast kinetics (0.64 g/(mg‧min)), high adsorption capacity (652.9 mg/g), outstanding selectivity (Kd = 6.2 × 106 mg/L), and excellent reusability (R > 95 % after 20 cycles). Importantly, CU-SH exhibits good resistance to various coexisting ions and organic matter, and can efficiently remove Hg(II) from different real water. CU-SH can be made into a Point of Use (POU) device for continuous and efficient removal of Hg(II) from drinking water. 0.1 g CU-SH filled device can purify 3.2 L of Hg(II) (0.5 ppm) contaminated tap water before the breakthrough point of 2 ppb. Moreover, CU-SH also reveals good adsorption affinity for Hg-dissolved organic matter complexes (Hg(II)-DOM) in water, chloro(phenyl)mercury (PMC) in organic media and Hg0 vapor in air, suggesting the great practical potential of CU-SH.

Well-designed protein amyloid nanofibrils composites as versatile and sustainable materials for aquatic environment remediation: A review

Amyloid nanofibrils (ANFs) are supramolecular polymers originally classified as pathological markers in various human degenerative diseases. However, in recent years, ANFs have garnered greater interest and are regarded as nature-based sustainable biomaterials in environmental science, material engineering, and nanotechnology. On a laboratory scale, ANFs can be produced from food proteins via protein unfolding, misfolding, and hydrolysis. Furthermore, ANFs have specific structural characteristics such as a high aspect ratio, good rigidity, chemical stability, and a controllable sequence. These properties make them a promising functional material in water decontamination research. As a result, the fabrication and application of ANFs and their composites in water purification have recently gained considerable attention. Despite the large amount of literature in this field, there is a lack of systematic review to assess the gap in using ANFs and their composites to remove contaminants from water. This review discusses significant advancements in design techniques as well as the physicochemical properties of ANFs-based composites. We also emphasize the current progress in using ANFs-based composites to remove inorganic, organic, and biological contaminants. The interaction mechanisms between ANFs-based composites and contaminants are also highlighted. Finally, we illustrate the challenges and opportunities associated with the future preparation and application of ANFs-based composites. We anticipate that this review will shed new light on the future design and use of ANFs-based composites.

One-step synthesis of a benzothiadiazole-based nonbranching functionalized covalent organic framework and its application in efficient removal of Hg2

In recent years, a variety of adsorbents have been developed for Hg2+ removal. However, these adsorbents are unsatisfactory for adsorption due to narrow and irregular pore channels or poor adsorption capacity and low stability. Therefore, it is worth exploring a porous Hg2+ adsorbent material with high adsorption performance and stability. In this study, a benzothiadiazole-based nonbranching functionalized covalent organic framework (COF) material (TPS-COF) by one-step synthesis was reported, which exhibited a high specific surface area of 1564 m2 g-1, high crystallinity and stability attributed to its high conjugated linkage structure of benzothiadiazole. In addition, due to the rich S and N elements of the benzothiadiazole unit, it exhibited excellent adsorption performance on Hg2+, including excellent adsorption amount (1040 mg g-1), high initial adsorption rate (448 mg g-1 min-1) and very short adsorption equilibrium time (10 min), with an efficient removal rate of Hg2+ in the pH range of 2-8. After desorption, the TPS-COF still retained good pore stability, adsorption capacity, and reusability. Such a one-step synthetic unbranched functionalization strategy provides further insights to achieve a good balance between the high crystallinity, functionality and stability of COFs.

Thiazole-Formulated Azomethine Compound for Three-Way Detection of Mercury Ions in Aqueous Media and Application in Living Cells

Heavy metal ions are extremely poisonous and cause long-term harm to living organisms. Among these ions, mercury is the most toxic metal and has no notorious purpose in the human body. In this regard, an elegant azomethine thiazole compound AM1 was synthesized, and it was found to be highly sensitive to three-way detection of mercury ions with detection limits of 0.1126 × 10^-9 M (FL) and 0.64 × 10^-6 M (UV-vis). AM1 highlighted the capability to detect mercury ions through the colorimetric method, the fluorometric method, and via the naked eye in three-way detection. In addition, the structure of AM1 was confirmed by single-crystal X-ray diffraction studies and crystallized in a monoclinic crystal system with a P21/c space group, and it shows numerous noncovalent interactions in the crystal packing. The high sensitivity of AM1 to Hg²⁺ ions was imputed to the quenching mechanism and was estimated by Fourier transform infrared (FT-IR) spectroscopy, nuclear magnetic resonance (¹H-NMR), high-resolution mass spectrometry (HRMS), ultraviolet-visible (UV-vis) absorbance, fluorescence (FL) emission, Job's plot, B-H plot, and DFT calculation. Naked eye color change of AM1 solution to yellow and turn-off FL by the addition of mercury ion is due to complex formation. In addition to mercury ions, the sensor displayed a new absorption peak at around 240 nm. Furthermore, an AM1-coated test strip is used as the solid support sensor, and real-time detection of Hg²⁺ ions in the HeLa cell line by fluorescence microscopy is performed.

Efficient Removal of Hg(II) from Water under Mildly Acidic Conditions with Hierarchical SiO2 Monoliths Functionalized with -SH Groups

In this work, novel adsorbents based on 3D hierarchical silica monoliths functionalized with thiol groups were used for the removal of Hg(II) ions from an acidic aqueous solution (pH 3.5). Silica monoliths were synthesized by using two different pluronic triblock polymers (P123 and F127) to study the effect of porous structure on their sorption capacity. Before and after functionalization by grafting with 3-mercaptopropyltrimethoxysilane (MPTMS), the monoliths were characterized by several techniques, and their Hg(II) removal potential was evaluated in batch experiments at 28 °C and pH 3.5, using different initial concentrations of Hg(II) ions in water (200-500 mg L-1). The thiol groups of the monoliths calcined at 550 °C showed thermal stability up to 300 °C (from TG/DTG). The functionalized monolith synthesized with P123 polymer and polyethylene glycol showed favorable hierarchical macro-mesopores for Hg(II) adsorption. M(P123)-SH exhibited 97% removal of Hg(II) at concentration 200 mg L-1. Its maximum adsorption capacity (12.2 mmol g-1) was two times higher than that of M(F127)-SH, demonstrating that the 3D hierarchical macro-mesoporosity allowing accessibility of Hg(II) to thiol groups favors the physical and chemical adsorption of Hg(II) under slightly acidic conditions.