Solar photocatalytic degradation of parabens using UiO-66-NH2

Full-Spectrum Utilization of ZIF-67/Ag NPs/NaYF4:Yb,Er Photocatalysts for Efficient Degradation of Sulfadiazine: Upconversion Mechanism and DFT Calculation

In this work, novel ternary composite ZIF-67/Ag NPs/NaYF4:Yb,Er is synthesized by solvothermal method. The photocatalytic activity of the composite is evaluated by sulfadiazine (SDZ) degradation under simulated sunlight. High elimination efficiency of the composite is 95.4% in 180 min with good reusability and stability. The active species (h+, ·O2 - and ·OH) are identified. The attack sites and degradation process of SDZ are deeply investigated based on theoretical calculation and liquid chromatography-mass spectrometry analysis. The upconversion mechanism study shows that favorable photocatalytic effectiveness is attributed to the full utilization of sunlight through the energy transfer upconversion process and fluorescence resonance energy transfer. Additionally, the composite is endowed with outstanding light-absorbing qualities and effective photogenerated electron-hole pair separation thanks to the localized surface plasmon resonance effect of Ag nanoparticles. This work can motivate further design of novel photocatalysts with upconversion luminescence performance, which are applied to the removal of sulphonamide antibiotics in the environment.

UiO-66-NH2 initiated cascade reaction: Constructing a ratiometric fluorescence sensor for ultrasensitive detection of nerve agent simulant

BACKGROUND

Highly toxic organophosphorus nerve agents often exist in the form of gas in the environment and can damage human neuroregulatory system by inhibiting the activity of acetylcholinesterase (AChE). However, fluorescent probes based on small organic molecules bring a secondary burden to environment, and their sensitivity and specificity for sarin simulant diethyl chlorophosphate (DCP) detection are unsatisfactory. Nanozyme cascade systems with signal amplification can be used for highly sensitive identification of analytes, but are rarely used in ratiometric analysis of DCP. Combination of enzyme cascades and ratiometric fluorescence ensures the accuracy and sensitivity of the output signal.

RESULTS

We prepared a self-assembled nanohybrid (Ag-AuNCs@UiO-66-NH2) by metal-organic framework material and gold nanoclusters. On the one hand, UiO-66-NH2 with enzyme-like activity was used to hydrolyze DCP into diethyl phosphate (DEP) and chloridion (Cl-). Cl- hindered aggregation-induced enhanced emission (AIEE) of AuNCs by binding with Ag+ and decreased the fluorescence of AuNCs. On the other hand, ligand metal charge transfer effect (LMCT) of UiO-66-NH2 was blocked by DCP to enhance the fluorescence of UiO-66-NH2. Combining ratiometric analysis and nanozyme cascade reaction, an ultra-sensitive fluorescence sensor for detecting DCP was constructed, and ensured the accuracy of experimental results. In addition, Ag-AuNCs@UiO-66-NH2 was embedded into the agarose hydrogel substrate, the resulting agarose hydrogel film allowed quantitative assessment of DCP vapor and high sensitivity was demonstrated (detection limit as low as 1.02 ppb).

SIGNIFICANCE

A strategy combining enzyme cascade with ratiometric fluorescence was proposed, which improved the accuracy and sensitivity of the analysis results. The soft-solid platform based on agarose hydrogel film was constructed to realize the quantitative monitoring of sarin simulant gas. The LOD value obtained in this work is much lower than the immediately life-threatening or health threatening concentration of sarin.

Rational synthesis of two isostructural thiophene-containing metal-organic frameworks toward photocatalytic degradation of organic pollutants

In this work, thiophene moieties (as the crucial functional groups) have been successfully incorporated into the skeleton of metal-organic frameworks (MOFs) by using thienyl-substituted triazole ligands. Reaction of AgCF3SO3 with 3-phenyl-5-(2-thienyl)-1,2,4-triazole (PTTzH) or 3,5-bis(2-thienyl)-1,2,4-triazole (BTTzH) afforded two isostructural MOFs (AgTz-3 and AgTz-4) in gram-scale. AgTz-4 with higher thiophene content showed significantly stronger photocatalytic activity than AgTz-3 with lower thiophene content. Noteworthy, the photodegradation rate constants of AgTz-4 were 0.055 mg·L-1·min-1 for rhodamine B and 0.24 min-1 for salazosulfapyridine, which is comparable or even higher than some MOF-based materials reported in the literature. More importantly, AgTz-4 demonstrated good reusability and stability after four cycles of photodegradation. Our experimental results revealed that the enhanced photodegradation efficiency can be attributed to the increased light absorption capacity and optimized band structure of Ag-MOFs resulting from the introduction of thiophene groups into MOF structures.

Photocatalytic degradation of parabens: A comprehensive meta-analysis investigating the environmental remediation potential of emerging pollutant

The increasing prevalence of paraben compounds in the environment has given rise to concerns regarding their detrimental impacts on both ecosystems and human health. Over the past few decades, photocatalytic reactions have drawn significant attention as a method to accelerate the otherwise slow degradation of these pollutants. The current study aims to evaluate the current efficacy of the photocatalytic method for degrading parabens in aqueous solutions. An extensive literature review and bibliometric analysis were conducted to identify key research trends and influential areas in the field of photocatalytic paraben degradation. Studies were screened based on the predetermined inclusion and exclusion criteria, which led to 13 studies that were identified as being appropriate for the meta-analysis using the random effects model. Furthermore, experimental parameters such as pH, paraben initial concentration, catalyst dosage, light intensity, and contact time have been reported to have key impacts on the performance of the photocatalytic degradation process. A comprehensive quantitative assessment of these parameters was carried out in this work. Overall, photocatalytic techniques could eliminate parabens with an average degradation efficiency of >80 %. The findings of the Egger's test and the Begg's test were statistically not significant suggesting potential publication bias was not observed. This review provides a holistic understanding of the photocatalytic degradation of parabens and is anticipated to encourage more widespread adoption of photocatalytic procedures as a suitable method for the elimination of parabens from aqueous solutions, opening new avenues for future research in this direction.

Functionalization of Defective Zr Metal-Organic Frameworks for Water Decontamination: Mechanistic Insight into the Competitive Roles of -NH2 and -SH Sites in Removal of As(III) Species

Direct removal of trivalent arsenic, As(III), arsenite, or H3AsO3, is a great challenge in accessing clean sources of water. Different methodologies and materials were applied in this regard, but among them, direct removal of As(III) species using a metal-organic framework (MOF)-based adsorbent shows a great deal of potential. Although some studies were conducted on As(III) removal using MOFs, studies of functional groups are still quite rare. For this purpose, three novel functionalized defective Zr-MOFs, using UiO-66 [Zr6(OH)4O4(BDC)6, where BDC2- = benzene-1,4-dicarboxylate], were fabricated to investigate the competitive or cooperative roles of the free -NH2 and/or -SH site in the removal of As(III). UiO-66 was functionalized with monocarboxylate linkers, including glycine (Gly, NH2-CH2-COOH), cysteine [Cys, SH(CH2)-NH2(CH)-COOH], and mercaptopropionic acid [Mer, SH-(CH2)2-COOH]. Gly@UiO-66, Cys@UiO-66, and Mer@UiO-66 were applied for the direct removal of As(III) species. Although Cys@UiO-66 is functionalized with both amine and thiol functional groups, Gly@UiO-66 has a higher adsorption capacity (301.4 mg g-1) with respect to As(III), which is among the best reported values. This is due to the fact that (1) the affinity of amine sites in Gly@UiO-66 for As(III) is higher than that of thiol sites in Mer@UiO-66 and (2) Cys@UiO-66 has a very small surface area compared to that of Gly@UiO-66. Mechanistic studies using X-ray photoelectron spectroscopy and vibrational spectroscopy reveal that not only the functionalization and chemical nature of the function but also other parameters such as the protonation-deprotonation mechanisms and chemical state of the function are other critical factors for designing a functional MOF-based adsorbent with high affinity for and maximum capacity with respect to the target analyte.

Fabrication of the flower-like Z-scheme heterojunction photocatalyst Bi-BiOI/UiO 66 for enhanced photodegradation of acetaminophen in simulated wastewater

Acetaminophen is a representative contaminant of emerging persistent organic pollutants that can cause environmental problems when it enters municipal wastewater. An innovative flower-like Z-scheme photocatalyst Bi-BiOI/UiO 66 heterojunction composite was designed and constructed via a one-step solvothermal method. Investigations demonstrated that the Z-scheme structure strongly contributes to increasing the degradation efficiency of micropollutants. The results indicate that the bandgap energy (Eg) of the Bi-BiOI/UiO 66 composite decreases significantly from 3.22 eV to 2.43 eV, in comparison with that of pure copper-based UiO 66. Under suitable conditions (5 mg/L Ace, pH 3, 0.05 g/L), the organic pollutants in the water can be removed completely. A k value of 5.67 × 10-2 min-1 for the Bi-BiOI/UiO 66 heterojunction composite was found to effectively represent the acetaminophen photodegradation process. The reaction mechanism of acetamide in aqueous solution is also discussed. The Bi in Bi-BiOI can use surface plasmon resonance to form an electric field and accelerate the separation of photogenerated electrons and holes. This study highlights the potential of a novel photocatalyst for practical application.

Oxidative treatment of micropollutants present in wastewater: A special emphasis on transformation products, their toxicity, detection, and field-scale investigations

Micropollutants have become ubiquitous in aqueous environments due to the increased use of pharmaceuticals, personal care products, pesticides, and other compounds. In this review, the removal of micropollutants from aqueous matrices using various advanced oxidation processes (AOPs), such as photocatalysis, electrocatalysis, sulfate radical-based AOPs, ozonation, and Fenton-based processes has been comprehensively discussed. Most of the compounds were successfully degraded with an efficiency of more than 90%, resulting in the formation of transformation products (TPs). In this respect, degradation pathways with multiple mechanisms, including decarboxylation, hydroxylation, and halogenation, have been illustrated. Various techniques for the analysis of micropollutants and their TPs have been discussed. Additionally, the ecotoxicity posed by these TPs was determined using the toxicity estimation software tool (T.E.S.T.). Finally, the performance and cost-effectiveness of the AOPs at the pilot scale have been reviewed. The current review will help in understanding the treatment efficacy of different AOPs, degradation pathways, and ecotoxicity of TPs so formed.

Functionalization of Defective Zr-MOFs for Water Decontamination: Mechanistic Insight into the Competitive Roles of -NH2 and -SH Sites in the Removal of Hg(II) Ions

Functional metal-organic frameworks (MOFs), especially those based on sulfur and nitrogen atoms, were frequently applied for the removal of Hg(II) ions. However, a systematic study on the cooperative or competitive roles of -SH and -NH2 functions in the presence of secondary mechanisms (proton transfer and redox) is still rare. In this work, the UiO-66 framework (Zr6(OH)4O4(BDC)6, BDC2- = benzene-1,4-dicarboxylate) was decorated with functional monocarboxylate linkers including glycine (Gly), mercaptopropionic acid (Mer), and cysteine (Cys). Due to the molecular similarity of these functional linkers, the coordination affinity between the amine and thiol sites with Hg(II) ions can be compared, and the effect of proton transfer and redox mechanisms on the possible thiol···Hg(II) and amine···Hg(II) interactions can be investigated. The results show that the Cys@UiO-66 framework can adsorb 1288 mg g-1 of Hg(II), while Mer@UiO-66 and Gly@UiO-66 can adsorb 593 and 313 mg g-1 at pH = 7 and 500 ppm, respectively. This is due to the facts that both the amine and the thiol functions of the Cys@UiO-66 framework show synergism in Hg(II) removal, and the secondary mechanisms reduce the affinity of thiol in Mer@UiO-66 and amine in Gly@UiO-66 frameworks in the removal process of Hg(II) ions. Free -SH sites in Mer@UiO-66 undergo a redox convert to -SO3H groups, and free protonated -NH2 sites in Gly@UiO-66 do not fully deprotonate during Hg(II) removal. Yet, in the case of Cys@UiO-66, free protonated -NH2 sites are fully deprotonated, and free SH sites did not convert to -SO3H groups during Hg(II) removal. These observations show that the redox and proton transfer mechanisms can negatively affect the adsorption capacity of functional MOFs containing free -SH and -NH2 groups. So, not only the functionalization but also control over secondary mechanisms in the removal process are necessary parameters to improve the affinity between functional MOFs and Hg(II) ions.

Intelligent quantitative recognition of sulfide using machine learning-based ratiometric fluorescence probe of metal-organic framework UiO-66-NH2/Ppix

Sulfides possess either high toxicity or play crucial physiological role such as gas transmitter dependent upon dosage, hence the significant for their rapid sensitive and selective concentration determination. Herein, a machine learning enhanced ratiometric fluorescence sensor was engineered for sulfide determination by incorporating the nanometal-organic framework (UiO-66-NH2) along with protoporphyrin IX (Ppix). The blue fluorescence at 431 nm originated from the moiety of UiO-66-NH2 by 365 nm excitation serves as an internal calibration reference signal, while the red fluorescence at 629 nm from the moiety of Ppix serves as the analytical signal, and the intensity is correlated to the amount of sulfides. The fluorescence color of the sensor gradually varies from blue to red upon sequential addition of copper and sulfide ions, resulting in RGB (Red, Green, Blue) feature values for corresponding sulfide concentrations, which facilities the advanced data processing techniques using machine learning algorithms. On the basis of fluorescence image fingerprint extraction and machine learning algorithms, an online data analysis model was developed to improve the precision and accuracy of sulfide determination. The established model employed Linear Discriminant Analysis (LDA) and was subjected to rigorous cross-validation to ensure its robustness. By analyzing the correlation between RGB feature values and sulfide concentrations, the study highlighted a significant positive relationship between the red feature values and sulfide concentrations. The application of machine learning techniques on the ratiometric fluorescence signal of the UiO-66-NH2/Ppix probe demonstrated its potential for intelligent quantitative determination of sulfides, offering a valuable and efficient tool for pollution detection and real-time rapid environmental monitoring.

Effect of pH on UV/H2O2-mediated removal of single, mixed and halogenated parabens from water

Adjusting pH values in aqueous environments can significantly improve the efficiency by which parabens and halo-parabens are removed. In this study, 20 neutral and deprotonated species were selected as models to investigate their pH-dependent removal mechanisms and kinetics by a UV/H2O2 process using density functional theory (DFT). Compared to neutral species, deprotonated species exhibit higher reactivity to HO• due to their high electron cloud density. H atom abstraction (HAA) reactions on the substitution groups are the most favorable pathways for neutral species, while radical adduct formation (RAF) reactions are the most favorable for deprotonated species. Single electron transfer (SET) reactions can be neglected for neutral species, while these reactions become a viable route for deprotonated molecules. The total reaction rate constants range from 1.63 × 109 to 3.74 × 1010 M- 1 s- 1 at pH 7.0, confirming the experimental results. Neutral and weakly alkaline conditions are favorable for the degradation of MeP and halo-parabens in the UV/H2O2 process. The order of removal efficiency at optimum pH is dihalo-parabens > mono-halo-parabens ≈ F, F-MeP > MeP. Furthermore, the transformation products must undergo oxidative degradation due to their high toxicity. Our findings provide new insights into the removal of parabens and their halogenated derivatives from wastewater.

Ni/Co/Carbon nitride derived from ZIF-67 (MOF) nanocomposite: Enhanced light-driven photocatalytic degradation of methylparaben, mechanism & toxicity

A nickel oxide/cobalt/carbon nitride (Ni/Co/CN) nanocomposite synthesized via co-precipitation was used for the degradation of methylparaben (MEP). Various analytical techniques were used to ascertain the structural, optical, and electrochemical characteristics of the synthesized nanocomposite. The unique nature of the compound without any free particles over the CN was established. Photocatalytic degradation studies demonstrated the superiority of 3-Ni/Co/CN over bare NiO, Co/CN, 1-Ni/Co/CN, and 5-Ni/Co/CN. Near complete MEP degradation (100%) was achieved after 120 min of incubation with MEP 75 mg L-1 in acidic medium pH (3) for an initial concentration of 3-Ni/Co/CN (10 mg/100 mL). HPLC-MS/MS analysis was used to elucidate the degradation pathway, and the catalyst was found stable for four subsequent cycles. Hence, our nanocatalyst effectively degraded MEP. Furthermore, microbial, aquatic, and animal studies demonstrated the environmental efficiency of the synthesized nanomaterials.

Post-Synthetic Modification of Zr-based Metal-Organic Frameworks with Imidazole: Variable Optical Behavior and Sensing

UiO-66-NH2 -IM, a fluorescent metal-organic framework (MOF), was synthesized by post-synthetic modification of UiO-66-NH2 with 2-imidazole carboxaldehyde via a Schiff base reaction. It was examined using various characterization techniques (PXRD, FTIR, NMR, SEM, TGA, UV-Vis DRS, and photoluminescence spectroscopy). The emissive feature of UiO-66-NH2 -IM was utilized to detect volatile organic compounds (VOCs), metal ions, and anions, such as acetone, Fe3+ , and carbonate (CO3 2- ). Acetone turns off the high luminescence of UiO-66-NH2 -IM in DMSO, with the limit of detection (LOD) being 3.6 ppm. Similarly, Fe3+ in an aqueous medium is detected at LOD=0.67 μM (0.04 ppm) via quenching. On the contrary, CO3 2- in an aqueous medium significantly enhances the luminescence of UiO-66-NH2 -IM, which is detected with extremely high sensitivity (LOD=1.16 μM, i. e., 0.07 ppm). Large Stern-Volmer constant, Ksv , and low LOD values indicate excellent sensitivity of the post-synthetic MOF. Experimental data supported by density functional theory (DFT) calculations discern photo-induced electron transfer (PET), resonance energy transfer (RET), inner filter effect (IFE), or proton abstraction as putative sensing mechanisms. NMR and computational studies propose a proton abstraction mechanism for luminescence enhancement with CO3 2- . Moreover, the optical behavior of the post-synthetic material toward analytes is recyclable.

Accelerated electron and mass transfer through constructing H2WO4/Ti3C2/g-C3N4 Z-scheme photocatalyst for environmental remediation

The catalytic efficiency of photocatalysts highly depends on electron transport and mass transfer. Herein, we designed and prepared an effective H2WO4/Ti3C2/g-C3N4 (HTC) Z-scheme heterojunction through interfacial engineering strategy. The results manifested that 97.4% of Cr(VI) (80 μM, 50 mL) could be removed by HTC heterojunction within 10 min under visible light irradiation. The reduction rate constant of Cr(VI) for H2WO4/g-C3N4 (HC) heterojunction increased by a factor of 21 after introducing the conductive Ti3C2. Moreover, 96% of tetracycline (TC, 10 mg L-1, 50 mL) could be degraded by HTC heterojunction within 30 min. The electronic conductivity and ionic diffusion coefficient of HC heterojunction increased by a factor of 64 and 1064 after adding Ti3C2, respectively. This result indicated that the introduction of highly conductive Ti3C2 significantly improved the electron and mass transfer of the heterojunction. Meanwhile, the HCT heterojunction displayed favorable photocurrent, and keep excellent photostability during the long-term test. Moreover, density functional theory (DFT) calculations demonstrated that the internal electric field (IEF) from g-C3N4 to H2WO4 in HCT heterojunction promotes the combination of the photoinduced electrons in the H2WO4 conduction band (CB) with photoinduced holes in the g-C3N4 valence band (VB), thus accelerating the charge transfer in the HCT Z-scheme heterojunction. The antibacterial efficiency of HTC heterojunction against E. coli and S. aureus could reach up to 98.4% and 99.7%, respectively. The degradation intermediates and the potential degradation mechanism of TC were analyzed and proposed based on the results of HPLC-MS analysis. Moreover, the toxicity of TC and degradation intermediates were estimated by Toxicity Estimation Software (T.E.S.T.) based on quantitative structure-activity relationship (QSAR). This work provided a valuable guideline for designing the effective MXene-based Z-scheme heterojunction for environmental remediation.

Dual-mode transfer response based on electrochemical and fluorescence signals for the detection of amyloid-beta oligomers (AβO)

An aptamer sensor has been developed utilizing a dual-mode and stimuli-responsive strategy for quantitative detection of AβO (amyloid-beta oligomers) through simultaneous electrochemical and fluorescence detection. To achieve this, we employed UIO-66-NH2 as a carrier container to load MB (Methylene Blue), and Fe3O4 MNPs (iron oxide magnetic nanoparticles) with aptamer (ssDNA-Fe3O4 MNPs) fixed on their surface for biological gating. The ssDNA-Fe3O4 MNPs were immobilized onto the surface of UIO-66-NH2 through hydrogen bonding between the aptamer and the -NH2 group on the surface of UIO-66-NH2, thereby encapsulating MB and forming ssDNA-Fe3O4@MB@UIO-66-NH2. During the detection of AβO, the aptamer selectively reacted with AβO to form the AβO-ssDNA-Fe3O4 complex, leading to its detachment from the surface of UIO-66-NH2. This detachment facilitated the release of MB, enabling its electrochemical detection. Simultaneously, the AβO-ssDNA-Fe3O4 complex was efficiently collected and separated using a magnet after leaving the container's surface. Furthermore, the addition of NaOH facilitated the disconnection of biotin modifications at the 3' end of the aptamer from the avidin modifications on the Fe3O4 MNPs. Consequently, the aptamer detached from the surface of Fe3O4 MNPs, resulting in the restoration of fluorescence intensity of FAM (fluorescein-5'-carboxamidite) modified at its 5' end for fluorescence detection. The dual-mode sensor exhibited significantly enhanced differential pulse voltammetry signals and fluorescence intensity compared to those in the absence of AβO. The sensor demonstrated a wide detection range of 10 fM to 10 μM, with a detection limit of 3.4 fM. It displayed excellent performance in detecting actual samples and holds promising prospects for early diagnosis of Alzheimer's disease.

Reductive Transformation of O-, N-, S-Containing Aromatic Compounds under Hydrogen Transfer Conditions: Effect of the Process on the Ni-Based Catalyst

The influence of the reaction medium on the surface structure and properties of a Ni-based catalyst used for the reductive transformations of O-, N-, and S-containing aromatic substrates under hydrogen transfer conditions has been studied. The catalysts were characterized by XRD, XPS, and IR spectroscopy and TEM methods before and after the reductive reaction. It has been shown that the conversion of 1-benzothiophene causes irreversible poisoning of the catalyst surface with the formation of the Ni2S3 phase, whereas the conversion of naphthalene, 1-benzofuran, and indole does not cause any phase change of the catalyst at 250 °C. However, after the indole conversion, the catalyst surface remains enriched with N-containing compounds, which are evenly distributed over the surface.

Synthesis of picolinates via a cooperative vinylogous anomeric-based oxidation using UiO-66(Zr)-N(CH2PO3H2)2 as a catalyst

The anomeric effect highlights the significant influence of the functional group and reaction conditions on oxidation-reduction. This article successfully investigates the anomeric effect in the synthesis of picolinate and picolinic acid derivatives through a multi-component reaction involving 2-oxopropanoic acid or ethyl 2-oxopropanoate, ammonium acetate, malononitrile, and various aldehydes. To facilitate this process, we employed UiO-66(Zr)-N(CH₂PO₃H₂)₂ as a novel nanoporous heterogeneous catalyst. The inclusion of phosphorous acid tags on the UiO-66(Zr)-N(CH₂PO₃H₂)₂ offers the potential for synthesizing picolinates at ambient temperature.

Frustrated Lewis pair boosting photocatalytic antibacterial activity on PDI-bridged bimetallic UiO-66-NH2

Designing frustrated Lewis pair (FLP)-structured photocatalysts is a new challenge in catalysis. In particular, the relationship between the active sites and photocatalytic charge transport mechanism over FLP-structured photocatalysts is still ill-defined. In this study, a novel perylene-3,4,9,10-tetracarboxylic diimide/UiO-66(Ti/Zr)-NH₂ (denoted as PDI/TUZr) photocatalyst is successfully constructed using an ammoniation process. The PDI/TUZr heterojunction is equipped with a unique "Zr/Ti SBUs-ligand-PDI" FLP structure and exhibits remarkable catalytic FLP properties. In this "Zr/Ti SBUs-ligand-PDI" structure, the Zr/Ti bimetal centers and PDI serve as Lewis acid and base sites, respectively, and the C-N chemical bond provides a channel for electron transmission, and a bimetallic system facilitates electron transfer from excited ligand to Zr/Ti-SBUs nodes. These superior microstructural designs cooperate to promote substrate activation for photocatalytic antibacterial reactions. Accordingly, 2.2-fold enhancement is achieved in visible photocatalytic antibacterial activity on Staphylococcus aureus for 4%PDI/0.2TUZr composite compared with unadorned UZr. This study provides insights into the formation and carrier transfer behaviors of solid FLP on MOFs and illustrates a rational strategy for the construction of highly efficient photocatalysts.

Cu2+@NMOFs-to-bimetallic CuFe PBA transformation: An instant catalyst with oxidase-mimicking activity for highly sensitive impedimetric biosensor

In this work, a facile impedance biosensor was constructed for sensitive assaying of miRNA-10b based on the Cu²⁺ modified NH₂-metal organic frameworks (NMOF@Cu²⁺) coupling with a three-dimensional (3D) DNA walker signal amplification strategy. Specifically, abundant Cu²⁺ can adhere to the MOF via the coordination reaction between NH₂ and Cu²⁺, which can be applied as a skeleton to produce CuFe Prussian blue analogue@NMOF (CuFe PBA@NMOF) just in time. Meanwhile, the carboxyl group, which is rich in the organic ligands of the NMOF, can be used to assemble DNA strands (complementary strand, CS) (CS-NMOF@Cu²⁺) for biorecognition reaction. With the introduction of the target, a 3D DNA walker was triggered to shear out large amounts of assistant strands (AS), which were then anchored on the surface of GCE. Afterward, CS-NMOF@Cu²⁺ can be assembled on the GCE by hybridization with AS. Eventually, abundant CuFe PBA@NMOF were generated in situ on the electrode with the help of K₃[Fe(CN)₆], which can catalyze the 4-chloro-1-naphthol (4-CN) precipitation without H₂O₂, thereby increasing the resistance of the platform. Under the optimal conditions, the EIS biosensor presents reliable analytical performance in a wide linear range from 0.8 pM to 250 pM with a low detection limit of 0.5 pM.

Fabrication of hydrangea-shaped Bi2WO6/ZIF-8 visible-light responsive photocatalysts for degradation of methylene blue

In this paper, the hydrangea-shaped Bi₂WO₆/ZIF-8 (BWOZ) visible light photocatalysts have been prepared via a facile synthetic strategy for the first time. The constructed BWOZ composites were systematically studied by a series of characterization techniques. The SEM results manifested the octahedral ZIF-8 coated the flower-like Bi₂WO₆ uniformly and the composition of BWOZ composites had been confirmed by XPS measurement. And the photocatalytic activity was evaluated by eliminating methylene blue with the help of visible light. The results showed that 7%-BWOZ (7.0 wt% Bi₂WO₆) exhibited better photodegradation capability than pure Bi₂WO₆ and ZIF-8. Compared with Bi₂WO₆, the photocatalytic degradation of methylene blue by 7%-BWOZ could reach 85.7%. In addition, the pseudo-first-order kinetic constant of 7%-BWOZ was 23.00 and 1.61 times that of pristine Bi₂WO₆ and ZIF-8, respectively. The improved photocatalytic ability of BWOZ systems may be due to the construction of heterojunctions between Bi₂WO₆ and ZIF-8, which resulted in the rapid separation of photogenerated carriers. Additionally, the specific surface area of the formed BWOZ system was also improved in comparison with the flower-shaped Bi₂WO₆, and thus more active sites could be provided to contact with methylene blue molecules, thereby achieving better removal capacity. Moreover, trapping experiments and electron spin resonance results further illustrated that the coexistence of multiple free radicals realized efficient degradation of methylene blue. More importantly, the photocatalytic property of the 7%-BWOZ composite remained even after three cycles. Furthermore, a feasible photodegradation mechanism was also explored in depth.

Functionalized UiO-66-NH2 by trimellitic acid for highly selective adsorption of basic blue 3 from aqueous solutions

A novel metal-organic framework (MOF) UiO-66-TLA (UiO-66-Trimellitic Acid) was synthesized by one-pot method with trimellitic acid as modifier, which can effectively remove the basic dye Basic Blue 3 (BB3) in wastewater. Modification with carboxyl groups facilitates the adsorption of the cationic dye Basic Blue 3. The adsorption of BB3 by the modified UiO-66-TLA was significantly greater than that of its parent MOF. The adsorption capacity of the modified UiO-66-TLA for BB3 (234.23 mg g⁻¹) was 93.2% higher than that of the original UiO-66-NH₂ (121.24 mg g⁻¹), this is closely related to the electrostatic interaction of -COOH in trimellitic acid. UiO-66-TLA was successfully synthesized as indicated by various characterization results. The adsorption kinetics conformed to the pseudo-second-order model, and the adsorption isotherm conformed to the Redlich-Peterson isotherm. This indicates that BB3 is a multi-parameter model of monolayer/multilayer arrangement on the adsorbent surface, and its rate-controlling step is chemisorption. The adsorption process was non-spontaneous and belonged to an endothermic reaction, in addition, it has great adsorption stability and regeneration The interaction of the modified UiO-66-TLA with BB3 was mainly affected by mechanisms, such as electrostatic interaction, π–π stacking as well as the abundant functional groups on UiO-66-TLA surface. These results demonstrate that UiO-66-TLA is an efficient, regenerable, water-stable material for the removal of BB3 in solution, with practical implications, suggesting its potential as a dye adsorbent.