Porous boron-doped diamond for efficient electrocatalytic elimination of azo dye Orange G

Critical review on electrooxidation and chemical reduction of azo dyes: Economic approach

Effective degradation technologies have been extensively investigated and used to remove azo dyes from wastewater for decades. However, no review dealing with both electrooxidation and chemical reduction of azo dyes from an economic and, therefore, application-relevant perspective has been found in the current literature. A novelty of this review article consists not only in the brief summarization and comparison of both methods but mainly in the evaluation of their economic side. Based on the literature survey of the last 15 years, the costs of treatment approaches published in individual research articles have been summarized, and the missing data have been calculated. A broad spectrum of advanced electrode materials and catalysts have been developed and tested for the treatment, specifically aiming to enhance the degradation performance. An outline of the global prices of electrode materials, reducing agents, and basic chemicals is involved. All additional costs are described in depth in this review. The advantages and disadvantages of respective methods are discussed. It was revealed that effective and cheap treatment approaches can be found even in advanced degradation methods. Based on the collected data, electrooxidation methods offer, on average, 30 times cheaper treatment of aqueous solutions. Concerning chemical reduction, only ZVI provided high removal of azo dyes at prices <100 $ per kg of azo dye. The factors affecting total prices should also be considered. Therefore, the basic diagram of the decision-making process is proposed. In the conclusion, challenges, future perspectives, and critical findings are described.

A chemical coating strategy for assembling a boron-doped diamond anode towards electrocatalytic degradation of late landfill leachate

The high efficiency electrocatalytic degradation of late landfill leachate is still not an easy task due to the complexity and variability of organic pollutants. A chemical coating strategy for assembling a boron-doped diamond anode (BDD) towards electrocatalytic degradation of late landfill leachate was adopted and studied. The results shows the high removal rates of organic carbon (TOC) and ammonia nitrogen (NH3-N) after electrochemical oxidation for 5 h can reach 99% and 100%. Further, the organic migration and transformation depends on current density, A/V value, initial pH, electrochemical degradation time, and composition of the stock solution. Specifically, alkaline conditions can increase both TOC and NH3-N removal rates, which is reflected in the NH3-N removal rate of 100% when the pH is 8.5 after only 5 h. The types of organic matter decreased from 63 species to 24 species in 5 h, in which the removal of fulvic acids is superior to that of soluble biometabolites. Amides/olefins and phenolic alcohols are all degraded and converted into other substances or decomposed into CO2 and H2O by BDD, accompanied by the continuous decomposition of alcohol-phenols into alkanes. In all, this study provides a core reference on electrocatalytic degradation of late landfill leachate.

Highly sensitive analysis of trace germanium derived from the efficient electrosynthesis and spectral introduction of GeH4 on foam electrode

BACKGROUND

The electrochemical hydride generation technology, which uses electrolysis instead of chemical reagents to generate reducing species to achieve gaseous transformation and sample introduction of the tested elements, has received widespread attention in the field of atomic spectroscopy due to its simple, economical, and green characteristics. However, limited by the effective area of the electrode, the introduction efficiency and spectral signal of most elements (e.g., germanium) in practical applications are lower than traditional chemical hydride generation.

RESULTS

In this paper, an efficient electrochemical hydride generation (EHG) method based on metal foam electrode for μg L-1 level germanium was constructed. Systematic electrochemical and spectral tests showed that the low charge transfer resistance and the high electrochemical activity of nickel-based foam electrodes jointly promoted the efficient electroreduction of Ge(IV). Besides, the porous network structure of the metal foam material improves the contact probability of reactants while reducing the gas-evolution effect caused by bubble accumulation. Interestingly, adequate reaction sites are crucial for the conversion of germanium, but large foam electrodes are not always compatible with analytical performance. After coupling atomic fluorescence spectroscopy, this new electrolysis method has been proven to be suitable for efficient conversion and quantitative detection of Ge over a wide concentration range (5-150 μg L-1).

SIGNIFICANCE

Our proposal to improve the electrosynthesis efficiency of germanane (GeH4) by using metal foam electrode is extremely effective for the detection of trace or ultra-trace germanium. The exploration of electrode material, structure, and especially effective area will also provide ideas for the establishment of highly sensitive analysis methods in the future.

Co-generation of hydroxyl and sulfate radicals via homogeneous and heterogeneous bi-catalysis with the EO-PS-EF tri-coupling system for efficient removal of refractory organic pollutants

Advanced oxidation processes are commonly considered one of the most effective techniques to degrade refractory organic pollutants, but the limitation of a single process usually makes it insufficient to achieve the desired treatment. This work introduces, for the first time, a highly-efficient coupled advanced oxidation process, namely Electro-Oxidation-Persulfate-Electro-Fenton (EO-PS-EF). Leveraging the EO-PS-EF tri-coupling system, diverse contaminants can be highly efficiently removed with the help of reactive hydroxyl and sulfate radicals generated via homogeneous and heterogeneous bi-catalysis, as certified by radical quenching and electron spin resonance. Concerning degradation of tetracycline (TC), the EO-PS-EF system witnessed a fast pseudo-first-order reaction kinetic constant of 2.54 × 10-3 s-1, ten times that of a single EO system and three-to-four times that of a binary system (EO-PS or EO-EF). In addition, critical parameters (e.g., electrolyte, pH and temperature) are systematically investigated. Surprisingly, after 100 repetitive trials TC removal can still reach 100% within 30 min and no apparent morphological changes to electrode materials were observed, demonstrating its long-term stability. Finally, its universality was demonstrated with effective degradation of diverse refractory contaminants (i.e., antibiotics, dyes and pesticides).