Breaking rate-limiting steps in a red mud-sewage sludge carbon catalyst activated peroxymonosulfate system: Effect of pyrolysis temperature

Physical conditioning methods for sludge deep dewatering: A critical review

Sludge is an inevitable waste product of sewage treatment with a high water content and large volume, it poses a significant threat of secondary pollution to both water and the atmosphere without proper disposal. In this regard, dewatering has emerged as an attractive method in sludge treatment, as it can reduce the sludge volume, enhance its transportability and calorific value, and even decrease the production of landfill leachate. In recent years, physical conditioning methods including non-chemical conditioners or energy input alone, have been extensively researched for their potential to enhance sludge dewatering efficiency, such as thermal treatment, freeze-thaw, microwave, ultrasonic, skeleton builders addition, and electro-dewatering, as well as combined methods. The main objective of this paper is to comprehensively evaluate the dewatering capacity of various physical conditioning methods, and identify key factors affecting sludge dewatering efficiency. In addition, future research anticipated directions and outlooks are proposed. This work is expected to provide valuable insights for developing efficient, eco-friendly, and low-energy consumption techniques for deep sludge dewatering.

Fast pyrolysis kinetics of waste tires and its products studied by a wireless-powered thermo-balance

Fast pyrolysis is commonly used in industrial reactors to convert waste tires into fine chemicals and fuels. However, current thermogravimetric analyzers are facing limitations that prevent the acquisition of kinetic information. To better understand the reaction kinetics, we designed a novel thermo-balance device that was capable of in-situ weight measurement during rapid heating. The results showed that the reaction rate substantially increased, with significant reductions in reaction time and apparent activation energy compared to slow pyrolysis. The change of reaction mechanism from the reaction order model to the nucleation and growth model was responsible for the increase in the degradation rate. Fast pyrolysis led to the generation of more trimers of isoprene as primary pyrolytic volatiles, which we further supported through density functional theory calculations. The findings suggested that fast pyrolysis has a higher chance of overcoming the high energy barrier to form trimers of isoprene. This comprehensive and in-depth understanding of fast pyrolysis kinetics and product distribution could reveal a more realistic process of waste pyrolysis, which benefited the industry.

Overlooked impacts of natural organic matter conversion in a Fe(II)-induced peroxymonosulfate activation system for river water remediation

The peroxymonosulfate (PMS) process may be hindered severely due to natural organic matter (NOM) conversion in the treatment of emerging pollutants from river water, becoming a critical engineering and technical issue. In this study, a Fe(II)-induced river water (RW)/PMS catalytic system was constructed for investigating molecular transformation of NOM and related influence mechanism to sulfamethoxazole (SMX) degradation. Fourier transform ion cyclotron resonance mass spectrometry (FTICR-MS) analysis indicated that NOM molecules containing no more than one heteroatom in river may be attacked by hydroxyl radicals (OH) and then polymerized, converting into molecules with two or three heteroatoms during PMS oxidation. Based on the correlation analysis, CHONP-NOM, CHOSP-NOM and CHONSP-NOM showed a significant inhibition against SMX degradation, while CHONS-NOM exhibited a moderate inhibitory effect. Besides, more condensed aromatic structures, carbohydrates and tannins were generated via reactive species (OH and sulfate radicals (SO₄^-)) oxidation, radical addition and polymerization reactions. Notably, condensed aromatic structures, carbohydrates and tannins presented weak, modest and strong inhibition to SMX degradation, respectively. Based on the current results, the inhibition of target pollutants degradation would be mitigated via regulation of NOM molecules in a Fe(II)-induced PMS activation system, providing valuable information to reduce NOM impact. In addition, this study paves the way to achieve efficient removal of emerging pollutants from river water.

Valorization of ball-milled waste red mud into heterogeneous catalyst as effective peroxymonosulfate activator for tetracycline hydrochloride degradation

Red mud (RM), a kind of iron-rich industrial waste produced in the alumina production process, can be utilized as a potential iron-based material for the removal of refractory organic pollutants from wastewater in advanced oxidation processes (AOPs). In this work, high-iron RM (rich in iron) was activated in a ball mill and applied as an effective activator of peroxymonosulfate (PMS) for tetracycline hydrochloride (TC-HCl) degradation. Compared with that of unmilled RM (69.7%), the TC-HCl decomposition ratios of ball-milled RM (BM-RM) (72.2%-92.0%) were all improved in the presence of PMS. Systematic characterization suggested that ball milling could optimize the physicochemical properties of RM, such as increased surface area, increased oxygen vacancies, enhanced electrical conductivity, and increased exposure of Fe(II) sites, all of which could effectively improve RM for PMS activation to degrade TC-HCl. The quenching experiments and electron paramagnetic resonance technique revealed that ¹O₂ and SO₄·^- contributed dominantly to the TC-HCl degradation. Ultra performance liquid chromatography mass spectrometry analysis combined with density functional theory calculation revealed that the degradation pathways of TC-HCl were driven by hydroxylation, N-demethylation and dehydration in BM-RM/PMS system. Based on quantitative structure-activity relationship prediction using the Toxicity Estimation Software Tool software, the toxicity of almost all intermediates was significantly reduced. An obvious inhibition effect on TC-HCl was occurred in the presence of Cl^-, whereas the presences of NO₃^- and SO₄^2- had little effect. However, HCO₃^- improved TC-HCl removal efficiency. BM-RM had a wide working pH range (pH = 3-11) and showed good stability and reusability in use. Overall, this work not only offers a simple and promising approach to improve the catalytic activity of RM, but also opens new insights into the ball-milled RM as an effective PMS activator for wastewater treatment.