Ionic-containing hyper-crosslinked polymer: A promising bifunctional material for CO2 capture and conversion

One-step synthesis of hydroxyl-functionalized ionic hyper-cross-linked polymers with high surface areas for efficient CO2 capture and fixation

Ionic liquid-based functional materials have attracted significant attention for their distinctive structure in the field of CO2 capture and conversion. In this work, a series of hydroxyl-functionalized ionic hyper-cross-linked polymers are prepared through a one-step Friedel-Crafts reaction involving hypoxanthine (HX) and benzimidazole (BI) as the monomers, along with various halohydrocarbon crosslinking agents. These polymers demonstrate a high specific surface area (558-1480 m2·g-1), well-developed microporous structure, and unique ion sites, enabling them to exhibit remarkable and reversible CO2 adsorption properties. Particularly noteworthy is their CO2 adsorption capacity, which surpasses that of similar ionic polymers documented in the literature, reaching 157.5 mg·g-1 at 273 K and 1 bar. Additionally, these polymers function as recyclable catalysts in the cycloaddition reaction of CO2 and epoxides, enabling the conversion of CO2 into cyclic carbonates with yields of up to 99 % even without a co-catalyst. Mechanism investigation reveals that the introduction of hydroxyl groups in the polymer is the key to improving catalytic activity through a synergistic catalytic effect. This research provides a novel concept for designing ionic functional materials with capabilities in both CO2 adsorption and catalytic activity.

Enhanced CO2 capture in partially interpenetrated MOFs: Synergistic effects from functional group, pore size, and steric-hindrance

Excessive CO2 emissions have contributed to global environmental issues, driving the development of CO2 capture adsorbents. Among various candidates, metal-organic frameworks (MOFs) are considered the most promising due to their unique microporous structure. Herein, a series of partially interpenetrated MOFs named UPC-XX were built to investigate the continuous enhancement in CO2 capture performance via synergistic effects from functional group, pore size, and steric-hindrance using theoretical calculations. It's showed that the introduction of functional groups improved the structure polarity and created more adsorption sites, thus, enhanced CO2 capture capacity. The pore size modification augments the exposure of adsorption sites to mitigate the negative impact of pore space and surface area reduction caused by the introduction of functional groups, thereby further increasing the CO2 capture capacity. The steric-hindrance effect optimized the adsorption sites distribution, which hasn't been considered in the previous two regulation strategies, thus, further increased the CO2 capture capacity. The results underscore UPC-MOFs as outstanding adsorbent materials, among the UPC-MOFs, UPC-OSO3-steric exhibited the highest CO2 capture capacity of 12.69 mmol/g with selectivities of 1142.41 (CO2 over N2) and 507.42 (CO2 over CH4) at 1.0 bar, 298 K. And the synergistic effect mechanisms of functional group, structure size, and steric hindrance were elucidated through theoretical calculations analyzing pore characteristics, gas distribution, isosteric heat, and van der Waals/Coulomb interactions.

Ionic Conjugated Polymers as Heterogeneous Catalysts for the Cycloaddition of Carbon Dioxide to Epoxides to Form Carbonates under Solvent- and Cocatalyst-Free Conditions

The generation of cyclic carbonates by the cycloaddition of CO₂ with epoxides is attractive in the industry, by which CO₂ is efficiently used as C1 source. Herein, a series of catalysts were developed to efficient mediate the cycloaddition of CO₂ with epoxides to generate carbonates. The catalysts were easily synthesized via the amine-formaldehyde condensation of ethidium bromide with a variety of linkers. The newly prepared heterogeneous catalysts have high thermal stability and degradation temperatures. The surface of the catalysts is smooth and spherical in shape. The effect of temperature, pressure, reaction time and catalyst dosage on the cycloaddition of CO₂ with epoxide were investigated. The results show that the catalyst with 1,3,5-tris(4-formylphenyl)benzene as the linker can achieve 97.4 % conversion efficiency at the conditions of 100 °C, reaction time of 12 h, and the reaction pressure of 1.2 MPa in a solvent-free environment. Notably, the polymers serve as homogeneous catalysts during the reaction (reaction temperature above T_g ) and can be separated and recovered easily as homogeneous catalysts at room temperature. In addition, the catalyst is not only suitable for a wide range of epoxide substrates, but also can be recycled many times. Furthermore, DFT calculations show that the coordination between the electrophilic center of the catalyst and the epoxide reduces the energy barrier, and the reaction mechanism is proposed based on the reaction kinetic studies and DFT calculations.