One-step synthesis of hydroxyl-functionalized ionic hyper-cross-linked polymers with high surface areas for efficient CO2 capture and fixation

Ionic liquid-based functional materials have attracted significant attention for their distinctive structure in the field of CO2 capture and conversion. In this work, a series of hydroxyl-functionalized ionic hyper-cross-linked polymers are prepared through a one-step Friedel-Crafts reaction involving hypoxanthine (HX) and benzimidazole (BI) as the monomers, along with various halohydrocarbon crosslinking agents. These polymers demonstrate a high specific surface area (558-1480 m2·g-1), well-developed microporous structure, and unique ion sites, enabling them to exhibit remarkable and reversible CO2 adsorption properties. Particularly noteworthy is their CO2 adsorption capacity, which surpasses that of similar ionic polymers documented in the literature, reaching 157.5 mg·g-1 at 273 K and 1 bar. Additionally, these polymers function as recyclable catalysts in the cycloaddition reaction of CO2 and epoxides, enabling the conversion of CO2 into cyclic carbonates with yields of up to 99 % even without a co-catalyst. Mechanism investigation reveals that the introduction of hydroxyl groups in the polymer is the key to improving catalytic activity through a synergistic catalytic effect. This research provides a novel concept for designing ionic functional materials with capabilities in both CO2 adsorption and catalytic activity.

The heptazine-based materials through intrinsically modification for the cycloaddition of CO2 and bisepoxides

For the efficient utilization of CO2 into valuable product, the attractive carbon nitride catalysts have been widely studied. In this work, heptazine-related materials with varying degree of polymerization were designed by an intrinsically modification strategy and employed in the cycloaddition of CO2 with the bisepoxide 1, 4-butanediol diglycidyl ether (BDODGE). We initially figured out that the sample prepared at 450°C contained more melem hydrate, exhibiting the best performance. The epoxides conversion and corresponding cyclic carbonates selectivity could achieve 93.1% and 99.3% at 140°C for 20 h without any cocatalyst and solvent, respectively. Results of the catalytic tests suggested that the high catalytic activity was dependent on big size porous structure and the synergetic effect of active amino groups and -OH groups. The role of water in maintaining the specific structure and providing active site has been proved. Moreover, the CN-450-W catalyst exhibited outstanding recycling stability. And finally, a plausible reaction mechanism was proposed.

Pd-loaded hierarchical titanosilicalite-1 catalysts on CO2 cycloaddition with epoxides: Experimental and DFT investigations

This work presents the synthesis of Pd-loaded microporous titanosilicalite-1 (Pd/TS-1) and Pd-loaded hierarchical titanosilicalite-1 (Pd/HTS-1) with abundant mesopores (2-30 nm) inside the framework via hydrothermal method using polydiallydimethyl ammonium chloride as the non-surfactant mesopore template. XRD, N2 sorption, FT-IR, FESEM-EDX, TEM, XPS, and DR-UV techniques were used to characterize the morphological and physicochemical properties of the synthesized materials. These materials were tested as heterogeneous catalysts, along with tetrapropylammonium bromide as co-catalyst, for cycloaddition reactions of CO2 with epoxides to produce cyclic carbonates. It was found that the epoxide conversions were influenced by acidity and pore accessibility of the catalysts. Using Pd/HTS-1 facilitated bulky substrates to access active sites, resulting in higher conversions than Pd/TS-1. Over 85 % conversions were achieved for at least five consecutive cycles without significant loss in catalytic activity. The interaction between the Pd active surfaces and epichlorohydrin (ECH) was further studied by DFT calculations. The existence of Pd(200) was more influential on adsorbing epichlorohydrin (ECH) and subsequent formation of dissociated ECH (DECH) intermediate than Pd(111) surface. However, Pd(111) was dominant in enhancing the activity of DECH species for capturing CO2. Therefore, the co-existence of Pd(200) and Pd(111) surfaces was needed for cycloaddition of CO2 with ECH.

Poly(ionic liquid)-coated hydroxy-functionalized carbon nanotube nanoarchitectures with boosted catalytic performance for carbon dioxide cycloaddition

Poly(ionic liquid)s (PILs) bearing high ionic densities are promising candidates for carbon dioxide (CO2) fixation. However, efficient and metal-free methods for boosting the catalytic efficiencies of PILs are still challenging. In this study, a novel family of poly(ionic liquid)-coated carbon nanotube nanoarchitectures (CNTs@PIL) were facilely prepared via a noncovalent and in-situ polymerization method. The effects of different carbon nanotubes (CNTs) and PILs on the structure, properties, and catalytic performance of the composite catalysts were systematically investigated. Characterizations and experimental results showed that hybridization of PIL with hydroxyl- or carboxyl-functionalized CNTs (CNT-OH, CNT-COOH) endows the composite catalyst with increased porosity, CO2 capture capacity, swelling ability and diffusion rate with respect to individual PIL, and allows the CNTs@PIL to provide H-bond donors for the synergistic activation of epoxides at the interfacial layer. Benefiting from these merits, the optimal composite catalyst (CNT-OH@PIL) delivered a super catalytic efficiency in the cycloaddition of CO2 to propylene oxide, which was over 4.5 times that of control PIL under metal- and co-catalyst free conditions. Additionally, CNT-OH@PIL showed high carbon dioxide/nitrogen (CO2/N2) adsorptive selectivity and could smoothly catalyze the cycloaddition reaction with a simulated flue gas (15% CO2 and 85% N2). Furthermore, the CNT-OH@PIL exhibited broad substrate tolerance and could be readily recycled and efficiently reused at least 12 times. Hybridization of PIL with functionalized CNTs provides a feasible approach for boosting the catalytic performance of PIL-based solid catalysts for CO2 fixation.

Efficient in-situ conversion of low-concentration carbon dioxide in exhaust gas using silver nanoparticles in N-heterocyclic carbene polymer

Efficient utilizing CO2 is crucial approaches in achieving carbon neutralization. One of the challenges lies in the in-situ conversion of low concentration CO2 found in waste gases. This study introduces a novel heterogeneous catalyst known as silver nanoparticles in porous N-heterocyclic carbene polymer (Ag@POP-NL-3). The catalyst is synthesized via a streamlined pre-coordination method. Ag@POP-NL-3 exhibits uniform distribution of silver nanoparticles, a porous structure and nitrogen activation groups. It demonstrates high efficiency and selectivity in absorbing and activating CO2 and enabling the conversion of low concentration CO2 (30 vol%) from lime kiln waste gas into cyclic carbonate under mild conditions. This catalytic system achieves both CO2 capture and resource utilization of CO2 simultaneously, effectively fixing low-concentration CO2 from waste gases into C2+ valuable chemicals. This approach elegantly addresses two goals in one solution.

Engineering the activity and stability of ZIF-8(Zn/Co)@g-C3N4 nanocomposites and their synergistic action in converting atmospheric CO2 into cyclic carbonates

The development of novel catalytic materials that integrate multifunctional sites has significant implications for expanding the utilization of CO2 resources. However, simultaneously achieving high activity and stability remains a formidable challenge. In this study, a series of ZIF-8(Zn/Co)@g-C3N4 nanocomposites were prepared by employing a thermo-physical compounding strategy that involved the combination of nitrogen-rich graphitic carbon nitride (g-C3N4) nanosheets with ZIF-8(ZnCo). The influences of different compositions of g-C3N4 and ZIF-8(Zn/Co) on the catalyst structure were systematically investigated. Subsequently, the catalytic activities of these nanocomposites towards the cycloaddition reaction between CO2 and epoxide were examined under different conditions. The presence of abundant Lewis base sites in g-C3N4 facilitates CO2 activation, while multiple Lewis acid sites in ZIF-8(Zn/Co) enable efficient epoxide activation. By working synergistically with a co-catalyst, tetrabutylammonium bromide (TBAB), CO2 and epoxides can be efficiently reacted to synthesize the corresponding cyclic carbonates under mild or even atmospheric pressure conditions. The catalytic reaction conditions were optimized, and both the catalyst's recycling performance and the scope of epoxides with various substituents were investigated. The integration of g-C3N4 and ZIF-8(Zn/Co) endows the catalytic material with exceptional structural stability and remarkable catalytic activity, thereby providing a new platform for highly efficient CO2 conversion.

Diamine-modified porous indium frameworks with crystalline porous materials (CPM)-5 structure for carbon dioxide fixation under co-catalyst and solvent free conditions

In the present work, functional diamine groups into indium frameworks to synthesize cyclic carbonates from CO₂ and epoxides with efficient catalytic activity in the absence of co-catalyst and solvent are reported for the first time. Crystalline porous materials (CPM)-5 modified with 1,2-phenylene diamine and ethylene diamine (CPM-5-PhDA and CPM-5-EDA), were prepared using a post-synthetic modification (PSM) method. The properties of the modified CPM-5 were characterized by powder X-ray diffraction (PXRD), Fourier transform infrared spectroscopy (FT-IR), X-ray photoelectron spectroscopy (XPS), N₂-adsorption, scanning electron microscopy (SEM), CO₂ adsorption, and temperature programmed desorption TPD methods. The presence of diamine groups as basic sites and indium Lewis acid sites in the framework structure were desirable for high catalytic activity. For a given catalyst weight, CPM-5-PhDA was the best candidate to appear with great catalytic activity and selectivity for the cycloaddition reaction at 100°C and 1 MPa CO₂ under co-catalyst and solvent free conditions. CPM-5-PhDA also was found to afford large and bulky epoxides. The catalyst can be easily separated and reused five times without any decline in activity.

One-step synthesis of nitrogen-rich organic polymers for efficient catalysis of CO2 cycloaddition

Nitrogen-rich organic polymer poly(chloride triazole) (PCTs) was synthesized by a one-step method as metal-halogen-free heterogeneous catalyst for the solvent-free CO2 cycloaddition. PCTs had abundant nitrogen sites and hydrogen bond donors, exhibited great activity for the cycloaddition of CO2 and epichlorohydrin, and achieved 99.6% yield of chloropropene carbonate under the conditions of 110 ℃, 6 h, and 0.5 MPa CO2. The activation of epoxides and CO2 by hydrogen bond donor and nitrogen sites was further explained by density functional theory (DFT) calculations. In summary, this study showed that nitrogen-rich organic polymer is a versatile platform for CO2 cycloaddition, and this paper provides a reference for the design of CO2 cycloaddition catalysts.

Polymeric ionic liquid with carboxyl anchored on mesoporous silica for efficient fixation of carbon dioxide

The utilization of carbon dioxide (CO₂) has drawn much attention because of the increasing serious environmental problems. In order to promote the cycloaddition reaction of CO₂ to epoxides, a new synthesis strategy for friendly nonmetal catalyst to combine polymeric ionic liquid (PIL) with mesoporous silica (mSiO₂) was proposed. By thorough characterizations, those catalysts (mSiO₂-PIL-n, n = 1, 2, 3, 4) were verified that PIL with multiply catalytic active sites such as carboxyl group, imidazole ring and Br^-, was mainly anchored in mesoporous SiO₂ structures. Therefore, mSiO₂-PIL-n exhibited excellent catalytic activity for CO₂ cycloaddition reaction to epoxides under solventless and cocatalyst-free conditions. Typically, the appropriate PIL loading and specific surface area guaranteed mSiO₂-PIL-2 could efficiently catalyze the cycloaddition reaction with 96% yield and 99% selectivity to the target product of propylene carbonate under the conditions of 120 °C, 2 MPa and 6 h. Additionally, the mSiO₂-PIL-2 catalyst showed superior recyclability and there was no catalytic activity decrease for 10 runs of recycling due to the tightly anchored PIL on mesoporous SiO₂ by copolymerization. And the catalytic activity to other substituted epoxides over mSiO₂-PIL-2 was also expanded. Therefore, PIL anchored on mesoporous SiO₂ by copolymerization could be a promising synthetic strategy for the efficient catalyst to combine multiple active components in a single catalyst, meanwhile, mSiO₂-PIL-n exhibited an appealing catalyst candidate for the effective fixation and utilization of CO₂.

Salen-decorated Periodic Mesoporous Organosilica: From Metal-assisted Epoxidation to Metal-free CO2 Insertion

We clicked a salen ligand onto a thiol-ethane bridged periodic mesoporous organosilica (Salen-PMO) using a photo-initiated thiol-ene click reaction. This process resulted in a covalently bonded salen ligand on the PMO material. The final BET surface area amounts 511 m² /g and the pore size diameter is approximately 7 nm. The functionalized PMO material showed an excellent carbon dioxide uptake capacity of 1.29 mmol/g at 273 K and 1 bar. More importantly, by coordinating a MoO₂ ²⁺ complex onto the Salen-PMO material, we obtained a heterogeneous catalyst with a good catalytic performance for the epoxidation of cyclohexene. The catalyst was highly reusable, as no decrease in its activity was observed for at least four runs (99% conversion). Finally, the metal-free Salen-PMO showed an exceptional catalytic performance in the cycloaddition of CO₂ to epoxides. The obtained results clearly demonstrate the versatility of the Salen-PMO material not only as metal-free catalyst but also as a support material to anchor metal complexes for specific catalytic applications. With the same catalytic platform, we were able to firstly create epoxides out of alkenes, and subsequently turn these epoxides into cyclic carbonates, consuming CO₂ .

Non-isocyanate urethane linkage formation using l-lysine residues as amine sources

Bio-based polyurethane materials are broadly applied in medicine as drug delivery systems. Nevertheless, their synthesis comprises the use of petroleum-based toxic amines, isocyanates and polyols, and their biocompatibility or functionalization is limited. Therefore, the use of lysine residues as amine sources to create non-isocyanate urethane (NIU) linkages was investigated. Therefore, a five-membered biscyclic carbonate (BCC) was firstly synthetized and reacted with a protected lysine, a tripeptide and a heptapeptide to confirm the urethane linkage formation with lysine moiety and to optimize reaction conditions. Afterwards, the reactions between BCC and a model protein, elastin-like protein (ELP), and β-Lactoglobulin (BLG) obtained from whey protein, respectively, were performed. The synthesized protein materials were structural, thermally and morphologically characterized to confirm the urethane linkage formation. The results demonstrate that using both simple and more complex source of amines (lysine), urethane linkages were effectively achieved. This pioneering approach opens the possibility of using proteins to develop non-isocyanate polyurethanes (NIPUs) with tailored properties.

The coupling of carbon dioxide and epoxides by phenanthroline derivatives containing different Cu(II) complexes as catalyst

A series of the mononuclear Cu(II) metal complexes containing the ligand Bdppz [(9a,13a-dihydro-4,5,9,14-tetraaza-benzo[b]triphenylene-11-yl)-phenyl-methanone] (L1) and Aqphen [(12,17-dihydronaphthol[2,3-h]dipyrido[3,2-a:2',3'-c]-phenazine-12,17-dione)] (L2) were synthesized and used as catalyst for the coupling of carbon dioxide (CO2) and liquid epoxide which served as both reactant and solvent. Dimethylamino pyridine (DMAP) was used as co-catalyst. The yields of epoxides to corresponding cyclic carbonates were determined by comparing the ratio of product to substrate in the (1)H NMR spectrum of an aliquot of the reaction mixture. The mononuclear Cu(II) complexes of these ligands were synthesized by treating an ethanol solvent of the appropriate ligand with a different molar amount of CuCl2·2H2O. The Cu(II) complexes were characterized by FT-IR, UV-Vis, elemental analysis, melting point analysis, mass spectra, molar conductivity measurements and magnetic susceptibility techniques. The reaction of the Bdppz and Aqphen ligands in a 1:1, 1:2 or 1:3 mole ratio with CuCl2·2H2O afforded ionic Cu(II) complexes in the presence of Et3N.