Nitrogen-rich based conjugated microporous polymers for highly efficient adsorption and removal of COVID-19 antiviral drug chloroquine phosphate from environmental waters

Ultra-stable hollow nanotube conjugated microporous polymer incorporating fluorenyl moieties for Co-capture of PM and CO2

Conjugated microporous polymers have a highly delocalized π-π conjugated porous skeleton connected by covalent bonds, which can combine their excellent stability with high adsorption, in order to be applied to the study of co-capture of harmful particulate matter (PM) and carbon dioxide (CO2) under high temperature and high humidity conditions. In this paper, fluorene-based coupled conjugated microporous polymers (D-CMPs) with functionalized hollow nanotubes and abundant microporous structures were proposed. Through mechanism exploration and molecular electrostatic potential (MESP) calculation, the capture efficiency, adsorption capacity and selectivity of PM and CO2 in the waste gas stream of carbon-based combustion were analyzed. The results indicate that D-CMPs, with their rigid carbon-based π-conjugated framework, exhibit excellent tolerance under prolonged high-humidity conditions, with a capture efficiency exceeding 99.87% for PM0.3 and exceeding 99.99% for PM2.5. Meanwhile, based on its chemical/thermal stability, it can realize the recycling of adsorption-regeneration. On this basis, the "slip effect" induced by the open three-dimensional hierarchical porous structure of D-CMPs significantly enhances airflow dispersion and improves gas throughput (with a minimal permeation resistance of only 15 Pa). At a pressure of 1 bar and a temperature of 273.15 K, D-CMP-2 exhibited a CO2 adsorption capacity of up to 2.69 mmol g-1. The fitting results of three isothermal adsorption models demonstrate that D-CMPs exhibit an outstanding equilibrium selectivity towards CO2. Therefore, prior to the widespread adoption of low-carbon and clean energy technologies, porous solid materials exhibiting excellent structural stability, equilibrium selectivity, environmental tolerance, and high adsorption capacity emerge as optimal candidates for the treatment of industrial waste gases.

Efficient adsorptive removal of used drugs during the COVID-19 pandemic from contaminated water by magnetic graphene oxide/MIL-88 metal-organic framework/alginate hydrogel beads

Currently, the presence of drugs used in the COVID-19 pandemic in water bodies is worrisome due to their high toxicity, which necessitates their critical removal by developing highly efficient adsorbents. Hence, in this study, alginate hydrogel beads of magnetic graphene oxide@MIL-88 metal-organic framework (GO@Fe3O4@MIL-88@Alg) were prepared for the first time and then utilized as a new absorption system for the removal of COVID-19 drugs such as doxycycline (DOX), hydroxychloroquine (HCQ), naproxen (NAP), and dipyrone (DIP) from aqueous solutions by batch adsorption manner. The effects of different experimental factors, such as adsorbent dosage, contact time, pH, drug concentration, temperature, ionic strength, presence of an external magnetic field (EMF), and magnet distance from the adsorption flask were optimized for the removal of COVID-19 drugs. The adsorption equilibrium isotherm proved that the adsorption process of DOX, HCQ, NAP, and DIP drugs on GO@Fe3O4@MIL-88@Alg hydrogel beads conformed to the Langmuir model and followed the pseudo-second-order adsorption kinetics. The maximum adsorption capacities of DOX, HCQ, NAP, and DIP drugs obtained for GO@Fe3O4@MIL-88@Alg hydrogel beads with the Langmuir model were 131.57, 79.92, 55.55, and 49.26 mg/g at 298 K, respectively. The thermodynamic study suggested a spontaneous endothermic adsorption process. Also, the conclusion from this study confirmed the validity of GO@Fe3O4@MIL-88@Alg hydrogel beads for excellent removal of COVID-19 drugs from water samples. It was also found that the GO@Fe3O4@MIL-88@Alg hydrogel beads could be reused with satisfactory removal efficiency in six cycles. Based on the study, the GO@Fe3O4@MIL-88@Alg hydrogel beads could be considered a sustainable, simple, economical, environmentally friendly absorption system for the removal of pharmaceutical contaminants from water.

Efficient adsorption of chloroquine phosphate by a novel sodium alginate/tannic acid double-network hydrogel in a wide pH range

In this work, a novel double-network composite hydrogel (SA/TA), composed of sodium alginate (SA) and tannic acid (TA), was designed and fabricated by a successive cross-linking method using Ti(IV) and Ca(II) as crosslinkers. SA/TA exhibited reinforced mechanical strength and anti-swelling properties because of the double-network structure. SA/TA was used as an adsorbent for removal of a popular antiviral drug, chloroquine phosphate (CQ), in water. The adsorption performance of SA/TA was systematically investigated, to study various effects including those of TA mass content, solution pH, adsorption time, and initial CQ concentration. Adsorption was also examined in presence of inorganic and organic coexisting substances commonly found in wastewater, and under different actual water samples. Batch experimental results indicated that SA/TA could maintain higher and more stable CQ uptakes within a wide solution pH range from 3.0 to 10.0, compared to its precursor, SA hydrogel, owing to the addition of TA-Ti(IV) coordination network. The maximum experimental CQ uptake exhibited by the 1:1 (by wt) SA/TA (SA/TA2) was as high as 0.699 mmol/g at the initial pH of 9.0. A high concentration of coexisting NaCl evidently reduced the CQ uptakes of SA/TA2 due to the electrostatic shielding effect, moreover, divalent cations including Ca(II) and Mg(II) also inhibited the adsorption of CQ due to competitive adsorption. However, humic acid had little effect on this adsorption. Considering the apparent adsorption performance, the aforementioned effects of various factors and the spectroscopic characterizations, multi-interactions are suggested for adsorption including chelation, electrostatic interactions, π-π electron donor-acceptor interaction and hydrogen bonding. SA/TA showed a slight loss in adsorption capacity toward CQ and sustained physicochemical structural stability, even after six adsorption-desorption cycles. In addition to CQ, SA/TA could be efficiently used for adsorption of two other antivirus drugs, namely, hydroxychloroquine sulfate and oseltamivir phosphate. This work provides an effective strategy for the design and fabrication of novel adsorbents that can effectively adsorb antiviral drugs over a wide pH range.

Synthesis of a novel functionalized biosorbent from mango stone and its application in the pharmaceutical's removal from water and a synthetic mixture

This paper explores the feasibility of functionalizing mango stones with iron oxide magnetic nanoparticles (MS-Fe3O4) by coprecipitation in batch adsorption processes. The synthesized material was characterized and applied in chloroquine (CQN) and sertraline hydrochloride (SER) removal from contaminated waters. The biosorbent was subjected to a regenerative study and treatment using a synthetic mixture of contaminants to evaluate its applicability in real effluents. The biosorbent was analyzed by transmission electron microscopy images, scanning electron microscopy, dispersive X-ray spectroscopy, Fourier transform infrared spectra, and zeta potential to characterize its chemical and morphology properties. The techniques applied showed the effectiveness of the proposed modification. In the adsorption experiments, the optimal adsorbent dosage was 0.01 g for both contaminants. The pH strongly influenced the adsorption of the drugs on MS-Fe3O4, and the best results were obtained in the pH range of 5-6. Kinetic data showed a better fit to the pseudo-second-order model, and the equilibrium time was achieved in 16 h for CQN and 4 h for SER. Isotherm studies revealed maximum adsorptive capacities of 49.42 and 64.79 mg g-1, respectively, for CQN and SER, at 318 K, demonstrating that the increase in temperature is a favorable factor, and the Sips model better describes the process. The thermodynamic parameters indicate an endothermic (ΔH° >0), spontaneous (ΔG° <0), and reversible (ΔS° >0) nature of the adsorption. This process is essentially governed by physical forces, such as hydrogen and π-π bonds. However, it is also valid to consider the presence of electrostatic forces due to the ionizing nature of CQN and SER. The MS-Fe3O4 biosorbent showed good performance when evaluated in a synthetic mixture of four contaminants, with an overall removal efficiency of approximately 86% and the regenerative capacity of three reusing cycles.

Red light photocatalysis of conjugated microporous polymers based on fused thiophenes for selective oxidation of amines

By virtue of tailorable building blocks, the band gaps and electronic structures of conjugated microporous polymers (CMPs) can be readily adjusted at the molecular level. Generally, the building blocks possessing extended π-conjugations result in exceptional photocatalytic performances. In this work, the direct CH arylation of fused thiophenes, thieno[3,2-b]thiophene (TT) and dithieno[3,2-b:2',3'-d]thiophene (DTT), with 1,3,6,8-tetrabromopyrene affords two CMPs, namely TT-Py-CMP and DTT-Py-CMP. The expansion of π-conjugations of the fused thiophenes from TT to DTT gives rise to a bathochromic shift about 30 nm from TT-Py-CMP to DTT-Py-CMP. Besides, systematic characterizations suggest the optoelectronic properties of DTT-Py-CMP are better than that of TT-Py-CMP. Furthermore, DTT-Py-CMP drives better red light photocatalysis than TT-Py-CMP for the selective oxidation of amines with molecular oxygen. The selective oxidation of benzyl amines by red light photocatalysis of DTT-Py-CMP progresses via an electron transfer pathway with high selectivities for imines. This work provides new insights that fused thiophenes could be the stepping stone in designing CMPs for expansive visible light photocatalysis.

A Conjugated Microporous Polymer/Wood Aerogel with Physical Adsorption, Chemical Degradation and Antibacterial Self-Cleaning Triple Sewage Treatment Functions

Conjugated microporous polymers (CMPs) have important applications in the fields of optoelectronics and sewage treatment due to their high specific surface area, broad visible absorption, processability and simple synthesis process. Biocompatibility, recycling, mass production and solar photodegradation are particularly important in wastewater treatment. Here, A CMP with a high specific surface area and a hierarchical pore structure (CPOP) was constructed based on 4,4',4″-Tris(carbazol-9-yl)-triphenylamine (3CZ-TPA). Furthermore, a CMP-loaded wood aerogel (CPOP/wood aerogel) with physical adsorption, chemical degradation, bacterial inhibition and self-cleaning properties was prepared by in situ polymerization and used for wastewater treatment. The obtained CPOP/wood aerogel is highly biocompatible and easy to recycle. In addition, the inherent broad visible light absorption property of CPOP endows it with promising photocatalytic properties. Subsequently, we investigated the photocatalytic mechanism of CPOP, and the results showed that it was mainly affected by peroxyl radicals, which implied and confirmed its microbial self-cleaning for secondary cleaning of water pollutants. The reported studies on CPOP/wood aerogel provide a new direction for water purification materials with excellent adsorption, degradation and antibacterial properties.

Removal Performance and Mechanism of Emerging Pollutant Chloroquine Phosphate from Water by Iron and Magnesium Co-Modified Rape Straw Biochar

Chloroquine phosphate (CQP) is effective in treating coronavirus disease 2019 (COVID-19); thus, its usage is rapidly increasing, which may pose a potential hazard to the environment and living organisms. However, there are limited findings on the removal of CQP in water. Herein, iron and magnesium co-modified rape straw biochar (Fe/Mg-RSB) was prepared to remove CQP from the aqueous solution. The results showed that Fe and Mg co-modification enhanced the adsorption efficiency of rape straw biochar (RSB) for CQP with the maximum adsorption capacity of 42.93 mg/g (at 308 K), which was about two times higher than that of RSB. The adsorption kinetics and isotherms analysis, as well as the physicochemical characterization analysis, demonstrated that the adsorption of CQP onto Fe/Mg-RSB was caused by the synergistic effect of pore filling, π-π interaction, hydrogen bonding, surface complexation, and electrostatic interaction. In addition, although solution pH and ionic strength affected the adsorption performance of CQP, Fe/Mg-RSB still had a high adsorption capability for CQP. Column adsorption experiments revealed that the Yoon-Nelson model better described the dynamic adsorption behavior of Fe/Mg-RSB. Furthermore, Fe/Mg-RSB had the potential for repeated use. Therefore, Fe and Mg co-modified biochar could be used for the remediation of CQP from contaminated water.