Fabrication and characterization of V2O5 nanorods based metal–semiconductor–metal photodetector

The Synthesis of Sponge-like V2O5/CNT Hybrid Nanostructures Using Vertically Aligned CNTs as Templates

The fabrication of sponge-like vanadium pentoxide (V2O5) nanostructures using vertically aligned carbon nanotubes (VACNTs) as a template is presented. The VACNTs were grown on silicon substrates by chemical vapor deposition using the Fe/Al bilayer catalyst approach. The V2O5 nanostructures were obtained from the thermal oxidation of metallic vanadium deposited on the VACNTs. Different oxidation temperatures and vanadium thicknesses were used to study the influence of these parameters on the stability of the carbon template and the formation of the V2O5 nanostructures. The morphology of the samples was analyzed by scanning electron microscopy, and the structural characterization was performed by Raman, energy-dispersive X-ray, and X-ray photoelectron spectroscopies. Due to the catalytic properties of V2O5 in the decomposition of carbonaceous materials, it was possible to obtain supported sponge-like structures based on V2O5/CNT composites, in which the CNTs exhibit an increase in their graphitization. The VACNTs can be removed or preserved by modulating the thermal oxidation process and the vanadium thickness.

Synthesis of 2D VO2 Nanosheets for the Dual Optical Sensor Method by Colorimetric and Fluorometric Sensing of Catecholamines

For the first time, we report a dual optical sensor method (DOSM) using novel 2D VO2 nanosheets to act as fluorometric and colorimetric sensors to perform quantitative analysis of epinephrine (EP) and dopamine (DA). The wide color spectrum of the 2D vanadium oxidation series and specifically metastable blue 2D VO2 nanosheets were used to develop a DOSM biosensor. DA and EP are the major catecholamines in the human body that play vital roles as neurotransmitters and stress-responsive hormones of the endocrine system, respectively. Accurate and selective detection of these biomolecules can assist in the diagnosis of many neuroendocrine system-related diseases. The newly synthesized 2D VO2 nanosheet sensor showed bluish-green fluorescence as the first-ever fluorescence from 2D VO2 nanosheets. This sensor showed dual-function sensing toward EP by a dominant color change and fluorescence quenching. It is capable of individually detecting and quantifying both EP and DA with high selectivity and sensitivity by using both colorimetry and fluorometry simultaneously, with the detection limits of 1.07 and 5.54 μM for colorimetric analysis, respectively, and 48.07 and 3.98 μM for fluorescence analysis, respectively. The DOSM sensor was directly applied to real urine samples and gained satisfactory recovery above 90% by means of spiked concentrations. This study has opened a new platform using the DOSM and the vanadium oxidation spectrum in a much more effective way for biosensing. The fluorescence capabilities of this metal oxide can be further applied to many sensor applications based on both fluorescence and colorimetric detection.

Building Low-Cost, High-Performance Flexible Photodetector Based on Tetragonal Phase VO2 (A) Nanorod Networks

We present a straightforward and cost-effective method for the fabrication of flexible photodetectors, utilizing tetragonal phase VO2 (A) nanorod (NR) networks. The devices exhibit exceptional photosensitivity, reproducibility, and stability in ambient conditions. With a 2.0 V bias voltage, the device demonstrates a photocurrent switching gain of 1982% and 282% under irradiation with light at wavelengths of 532 nm and 980 nm, respectively. The devices show a fast photoelectric response with rise times of 1.8 s and 1.9 s and decay times of 1.2 s and 1.7 s for light at wavelengths of 532 nm and 980 nm, respectively. In addition, the device demonstrates exceptional flexibility across large-angle bending and maintains excellent mechanical stability, even after undergoing numerous extreme bending cycles. We discuss the electron transport process within the nanorod networks, and propose a mechanism for the modulation of the barrier height induced by light. These characteristics reveal that the fabricated devices hold the potential to serve as a high-performance flexible photodetector.

Enhanced pollutant photodegradation over nanoporous titanium-vanadium oxides with improved interfacial interactions

This study addressed the separation problem of colloidal catalytic powder from its solution and pore blockage of traditional metallic oxides by fabricating nanoporous composites of titanium (Ti)-vanadium (V) oxide via magnetron sputtering, electrochemical anodization, and annealing processes. The effect of V-deposited loading on the composite semiconductors was investigated by varying V sputtering power (20-250 W) to correlate their physicochemical properties to the photodegradation performance of methylene blue. The obtained semiconductors revealed circular and elliptical pores (14-23 nm) and formed different metallic and metallic oxide crystalline phases. Within the nanoporous composite layer, V ions substituted Ti⁴⁺, leading to Ti³⁺ formation accompanied by decreased band gap values and higher visible-light absorption. Thus, the band gap of TiO₂ was 3.15 eV, while that of Ti-V oxide with the maximum V content (at 250 W) was 2.47 eV. The interfacial separators between clusters in the mentioned composite created traps disrupting the charge carrier movements between crystallites, thereby decreasing the photoactivity. In contrast, the composite prepared with the minimum V content showed approximately 90% degradation efficiency under solar-simulated irradiation resulting from the homogeneous V dispersion and the lower recombination possibility, owing to its p-n heterojunction constituent. The nanoporous photocatalyst layers with their novel synthesis approach and outstanding performance can be applied in other environmental remediation applications.

Tuning electronic and magnetic properties through disorder in V2O5 nanoparticles

We report on the synthesis and characterization of V₂O₅ nanoparticles grown using a sol-gel method at different calcination temperatures. We observed a surprising reduction in the optical band gap from 2.20 to 1.18 eV with increasing calcination temperature from 400 to 500 °C. Raman and X-Ray diffraction measurements indicated slight changes in the lattice parameters induced by the growth process. However, density functional theory calculations of the Rietveld-refined and pristine structures revealed that the observed optical gap reduction could not be explained by structural changes alone. By introducing oxygen vacancies to the refined structures, we could reproduce the reduction of the band gap. Our calculations also showed that the inclusion of oxygen vacancies at the vanadyl position creates a spin-polarized interband state that reduces the electronic band gap and promotes a magnetic response due to unpaired electrons. This prediction was confirmed by our magnetometry measurements, which exhibited a ferromagnetic-like behavior. Our findings suggest that oxygen vacancies play a crucial role in band gap reduction and the promotion of a ferromagnetic-like response in an otherwise paramagnetic material. This provides a promising route to engineer novel devices.

Room Temperature Ammonia Gas Sensor Based on p-Type-like V2O5 Nanosheets towards Food Spoilage Monitoring

Gas sensors play an important role in many areas of human life, including the monitoring of production processes, occupational safety, food quality assessment, and air pollution monitoring. Therefore, the need for gas sensors to monitor hazardous gases, such as ammonia, at low operating temperatures has become increasingly important in many fields. Sensitivity, selectivity, low cost, and ease of production are crucial characteristics for creating a capillary network of sensors for the protection of the environment and human health. However, developing gas sensors that are not only efficient but also small and inexpensive and therefore integrable into everyday life is a difficult challenge. In this paper, we report on a resistive sensor for ammonia detection based on thin V₂O₅ nanosheets operating at room temperature. The small thickness and porosity of the V₂O₅ nanosheets give the sensors good performance for sensing ammonia at room temperature (RT), with a relative change of resistance of 9.4% to 5 ppm ammonia (NH₃) and an estimated detection limit of 0.4 ppm. The sensor is selective with respect to the seven interferents tested; it is repeatable and stable over the long term (four months). Although V₂O₅ is generally an n-type semiconductor, in this case the nanosheets show a p-type semiconductor behavior, and thus a possible sensing mechanism is proposed. The device's performance, along with its size, low cost, and low power consumption, makes it a good candidate for monitoring freshness and spoilage along the food supply chain.

Salt-Assisted Selective Growth of H-phase Monolayer VSe2 with Apparent Hole Transport Behavior

Vanadium diselenide (VSe₂) exhibits versatile electronic and magnetic properties in the trigonal prismatic (H-) and octahedral (T-) phases. Compared to the metallic T-phase, the H-phase with a tunable semiconductor property is predicted to be a ferrovalley material with spontaneous valley polarization. Herein we report an epitaxial growth of the monolayer 2D VSe₂ on a mica substrate via the chemical vapor deposition (CVD) method by introducing salt in the precursor. Our first-principles calculations suggest that the monolayer H-phase VSe₂ with a large lateral size is thermodynamically favorable. The honeycomb-like structure and the broken symmetry are directly observed by spherical aberration-corrected scanning transmission electron microscopy (STEM) and confirmed by giant second harmonic generation (SHG) intensity. The p-type transport behavior is further evidenced by the temperature-dependent resistance and field-effect device study. The present work introduces a new phase-stable 2D transition metal dichalcogenide, opening the prospect of novel electronic and spintronics device design.

Facile Synthesis of Two Dimensional (2D) V2O5 Nanosheets Film towards Photodetectors

Most of the studies focused on V₂O₅ have been devoted to obtaining specific morphology and microstructure for its intended applications. Two dimensional (2D) V₂O₅ has the most valuable structure because of its unique planar configuration that can offer more active sites. In this study, a bottom-up and low-cost method that is hydrothermal combined with spin-coating and subsequent annealing was developed to prepare 2D V₂O₅ nanosheets film on quartz substrate. First, VOOH nanosheets were prepared by the hydrothermal method using V₂O₅ powders and EG as raw materials. Further, V₂O₅ nanosheets with an average lateral size over 500 nm and thickness less than 10 nm can be prepared from the parent VOOH nanosheets by annealing at 350 °C for 15 min in air. The prepared V₂O₅ nanosheets film was assembled of multiple nanosheets. The structural, morphological, microstructural and optical properties of the films were respective investigated by XRD, SEM, TEM and UV-Vis. The photodetector based on V₂O₅ nanosheets film shows good photoresponse with a response time of 2.4 s and a recovery time of 4.7 s.

Improved visible-light-driven photocatalytic removal of Bisphenol A using V2O5/WO3 decorated over Zeolite: Degradation mechanism and toxicity

WO₃/Zeolite/V₂O₅ (TZV) composite synthesized through co-precipitation was used for the degradation of Bisphenol-A (BpA). XRD and Raman spectra were employed to ascertain the crystallinity of the composite. The pristine nature of the compound without any free particles over the zeolite surface was established through FESEM, thus, substantiating the composite character of the material. The enhancement in activity after doping with WO₃ was ascertained by DRS-UV. Photocatalytic degradation studies clearly established the superiority of TZV 10 over bare V₂O₅. Complete BpA degradation (100%) was attained at 50 min of incubation with 0.75 g/L TZV-10 in acidic medium (pH 3) for an initial BpA concentration of 100 mg/L. HPLC-MS/MS analysis was used to decipher the degradation pathway. The catalyst was stable even after 9 cycles. Phytotoxicity studies and lake water treatment results proved the environmental efficiency of the synthesized material.

VO2 as a Highly Efficient Electrocatalyst for the Oxygen Evolution Reaction

Herein, we report high electrocatalytic activity of monoclinic VO₂ (M1 phase) for the oxygen evolution reaction (OER) for the first time. The single-phase VO₂ (M1) nanoparticles are prepared in the form of uniformly covering the surface of individual carbon fibers constituting a carbon fiber paper (CFP). The VO₂ nanoparticles reveal the metal-insulator phase transition at ca. 65 °C (heating) and 62 °C (cooling) with low thermal hysteresis, indicating a high concentration of structural defect which is considered a grain boundary among VO₂ nanoparticles with some particle coalescence. Consequently, the VO₂/CFP shows a high electrocatalytic OER activity with the lowest η₁₀ (350 mV) and Tafel slope (46 mV/dec) values in a 1 M aqueous solution of KOH as compared to those of the vacuum annealed V₂O₅ and the hydrothermally grown VO₂ (M1), α-V₂O₅, and γ′-V₂O₅. The catalytically active site is considered V⁴⁺ components and V^4+/5+ redox couples in VO₂. The oxidation state of V⁴⁺ is revealed to be more favorable to the OER catalysis compared to that of V⁵⁺ in vanadium oxide through comparative studies. Furthermore, the amount of V⁵⁺ component is found to be increased on the surface of VO₂ catalyst during the OER, giving rise to the performance degradation. This work suggests V⁴⁺ and its redox couple as a novel active component for the OER in metal-oxide electrocatalysts.

MWCNT synergy for boosting the electrochemical kinetics of V2O5 cathode for lithium-ion batteries

V2O5/MWCNT hybrid system has been developed and investigated as cathode in LIBs. The developed electrode shows superior performance as compare to pristine V2O5 and V2O5/rGO hybrid structure due to the synergy between V2O5 and MWCNT.

Systematic Assessment of Visible-Light-Driven Microspherical V2O5 Photocatalyst for the Removal of Hazardous Organosulfur Compounds from Diesel

The organosulfur compounds present in liquid fuels are hazardous for health, asset, and the environment. The photocatalytic desulfurization technique works at ordinary conditions and removes the requirement of hydrogen, as it is an expensive gas, highly explosive, with a broader flammability range and is declared the most hazardous gas within a petroleum refinery, with respect to flammability. The projected work is based on the synthesis of V2O5 microspheres for photocatalytic oxidation for the straight-run diesel (SRD) and diesel oil blend (DOB). The physicochemical properties of V2O5 microspheres were examined by FT-IR, Raman, UV-vis DRS, SEM, and Photoluminescence evaluations. The as-synthesized photocatalyst presented a trivial unit size, a narrow bandgap, appropriate light-capturing capability, and sufficient active sites. The desulfurization study discovered that the anticipated technique is substantial in desulfurizing DOB up to 37% in 180 min using methanol as an interfacing agent. Furthermore, the outcome of employing a range of polar interfacing solvents was examined, and the 2-ethoxyethanol elevated the desulfurization degree up to 51.3%. However, the anticipated technology is constrained for its application in sulfur removal from SRD. Additionally, the mechanism for a photocatalytic reaction was seen in strong agreement with pseudo-first-order kinetics. The investigated photocatalyst exhibited a compromised recyclability and regeneration tendency.

Construction of Schottky contact by modification with Pt particles to enhance the performance of ultra-long V2O5 nanobelt photodetectors

Schottky-contacted nanosensors have attracted extensive attention due to their high sensitivity and fast response time. In this article, we proved that the construction of Schottky contact by Pt nanoparticles (NPs) decoration can effectively improve the performance of V₂O₅ nanobelts photodetectors. After modified by Pt NPs, the photocurrent of V₂O₅ nanobelts is increased by more than two orders of magnitude, and the photoresponse speed is improved by at least three orders of magnitude. Detailed studies have shown that the performance enhancement is attributed to the formation of the Schottky contact at the electrode-semiconductor interface due to the decrease of surface gas adsorption and the increase of V₂O₅ work function after Pt NPs modification. The strong built-in field in the Schottky barrier region will quickly separate photogenerated carriers, thereby reducing the electron-hole recombination rate, resulting in the fast response time and an increase in the free carrier density. Moreover, it is found that this enhancement effect can be regulated by controlling the pressure to modulating the Schottky barrier height at the interface. Overall, the Pt NPs-modified V₂O₅ nanobelts photodetector exhibits a broad response spectrum (visible to near infrared), fast rise/fall response time (less than 6.12/6.15 ms), high responsivity (5.6 A/W), and high specific detectivity (6.9 × 10⁸ Jones). This study demonstrates the feasibility of building a Schottky barrier to enhance the photodetection performance, which provides a general and effective strategy towards the construction and its practical application of supersensitive and fast-response nanosensors.

NIR Luminescence Enhancement of YVO4:Nd Phosphor for Biological Application

This work reports two systematic studies related to yttrium vanadate (YVO₄) phosphors. The first evaluates how the annealing temperature and V⁵⁺/Y³⁺ molar ratio determine the emergence of a single YVO₄ tetragonal phase, whereas the second concerns the optimal Nd³⁺ concentration to improve the infrared emission properties for bio-labelling applications. The YVO₄:Nd phosphors were synthesized by adapting the non-hydrolytic sol-gel route. For the first study, samples containing different V⁵⁺/Y³⁺ molar ratios (1.02, 1.48, 1.71, or 3.13) were obtained. For the second study, YVO₄:Nd phosphors containing different Nd³⁺ concentrations (1.0, 3.0, 5.0, or 10.0% in mol) were prepared. X-ray diffractometry and RAMAN spectroscopy results revealed that, regardless of the heat-treatment temperature, the V⁵⁺/Y³⁺ molar ratio of 1.48 was the best composition to avoid undesired phases like Y₂O₃ and V₂O₅. Photoluminescence results indicated that the sample containing 3.0% in mol of Nd³⁺ and annealed at 1000 °C presented the best infrared emission properties. This sample displayed an intense broad band in the ultraviolet region, which was ascribed to the VO₄^3- charge transfer band, as well as several bands in the visible and infrared regions, which were attributed to the Nd³⁺ intraconfigurational f-f transitions. Regardless of the excitation wavelength (ultraviolet, visible, or near-infrared), the mean radiative lifetime was about 12.00 µs. The prepared phosphors presented absorption and emission bands in the biological window (BW) regions, which are located between 750 and 900 nm and between 1000 and 1300 nm, so they are candidates for applications in medical imaging and diagnoses.

A Review of Nanostructured Resistive-Based Vanadium Oxide Gas Sensors

Vanadium pentoxide (V2O5) is a transition metal oxide with features such as high availability, good catalytic activity, unique electrical properties and high conductivity which are appropriate for gas sensing applications. In this review, we discuss different gas sensing aspects of V2O5 in pristine, doped, decorated and composite forms. Depending on its synthesis procedure, morphology, sensing temperature and surface conditions, the V2O5-based gas sensors show different responses to target gases. Herein, we have discussed the behavior of V2O5-based gas sensors to different gases and associated sensing mechanisms. This review paper can be a useful reference for the researchers who works in the field of gas sensors.

Electrochromic Performance of V2O5 Thin Films Grown by Spray Pyrolysis

A new approach regarding the development of nanostructured V₂O₅ electrochromic thin films at low temperature (250 °C), using air-carrier spray deposition and ammonium metavanadate in water as precursor is presented. The obtained V₂O₅ films were characterized by X-ray diffraction, scanning electron microscopy and Raman spectroscopy, while their electrochromic response was studied using UV-vis absorption spectroscopy and cyclic voltammetry. The study showed that this simple, cost effective, suitable for large area deposition method can lead to V₂O₅ films with large active surface for electrochromic applications.

Comparative Study of Selenides and Tellurides of Transition Metals (Nb and Ta) with Respect to its Catalytic, Antimicrobial, and Molecular Docking Performance

The present research is a comparative study that reports an economical and accessible method to synthesize niobium (Nb) and Tantalum (Ta) selenides and tellurides with useful application in the removal of pollutants in textile, paper, and dyeing industries as well as in medical field. In this study, solid-state process was used to generate nanocomposites and various characterization techniques were employed to compare two groups of materials under investigation. Structure, morphology, elemental constitution, and functional groups of synthesized materials were analyzed with XRD, FESEM coupled with EDS, FTIR, and Raman spectroscopy, respectively. HR-TEM images displayed nanoscale particles with tetragonal and monoclinic crystal structures. The optical properties were evaluated in terms of cut-off wavelength and optical band gap using UV-visible spectroscopy. A comparative behavior of both groups of compounds was assessed with regards to their catalytic and microcidal properties. Extracted nanocomposites when used as catalysts, though isomorphs of each other, showed markedly different behavior in catalytic degradation of MB dye in the presence of NaBH₄ that was employed as a reducing agent. This peculiar deviation might be attributed to slight structural differences between them. Escherichia coli and Staphylococcus aureus (G -ve and + ve bacteria, respectively) were designated as model strains for in vitro antibacterial tests of both clusters by employing disk diffusion method. Superior antibacterial efficacy was observed for telluride system (significant inhibition zones of 26-35 mm) compared with selenide system (diameter of inhibition zone ranged from 0.8 mm to 1.9 mm). In addition, molecular docking study was undertaken to ascertain the binding interaction pattern between NPs and active sites in targeted cell protein. The findings were in agreement with antimicrobial test results suggesting NbTe₄ to be the best inhibitor against FabH and FabI enzymes.

Spray Coating of Two-Dimensional Suspended Film of Vanadium Oxide-Coated Carbon Nanotubes for Fabrication of a Large Volume Infrared Bolometer

A novel spray coating and transfer method is developed for fabricating a suspended bolometer of vanadium oxide-coated multiwalled carbon nanotubes (VCNTs). A parametric study was performed to evaluate the effect of the substrate, modulation frequency, and temperature on the bolometric performance and revealed that the performance of the bolometer solely does not depend on the substrate parameter but modulation frequency and bias current as a function of temperature also play a key attribute. The TCR (temperature coefficient of resistance) of the suspended VCNT bolometer is ∼-0.41%/K which is ∼486% higher than the reported suspended multiwalled CNTs at 300 K. Moreover, the suspended bolometer has a voltage responsivity of ∼67.42 ± 5.46 V/W (∼7.68 times that of unsuspended) at 200 K. Thus, the study presents an efficient method to develop the suspended bolometer that has not been realized so far to obtain much higher TCR and responsivity.

A sensitive electrochemical determination of chemotherapy agent using graphitic carbon nitride covered vanadium oxide nanocomposite; sonochemical approach

We have developed a graphitic carbon nitride covered vanadium oxide nanocomposite (V₂O₅@g-C₃N₄) by a simple sonochemical approach (50 kHz and 150 W/cm²). Furthermore, the morphology and chemical composition of the V₂O₅@g-C₃N₄ nanocomposite was carried out by X-rays diffractometry (XRD), transmission electron microscopy (TEM) and electrochemical impedance spectroscopy (EIS). Furthermore, the V₂O₅@g-C₃N₄ nanocomposite modified electrode was investigate electrochemical behavior of the anticancer drug. Compared with bare SPCE, V₂O₅/SPCE and g-C₃N₄/SPCE, V₂O₅@g-C₃N₄ modified SPCE showed highest current response towards anti-cancer drug (methotrexate). Furthermore, the modified sensor exhibits with a sharp peaks and wide linear range (0.025-273.15 μM) by using DPV with the sensitivity of 7.122 μA μM^-1 cm^-2. Notably, we have achieved a nanomolar detection limit (13.26 nM) for the DPV detection of methotrexate. Further, the practicability of the V₂O₅@g-C₃N₄ nanocomposite modified sensor can be used for real time sensing of methotrexate in drug and blood serum samples with good recover ranges. It has potential applications in routine analysis with high specificity, excellent reproducibility and good stability.

High-Performance Copper Oxide Visible-Light Photodetector via Grain-Structure Model

Recently, copper oxide (CuO)-based visible-light photodetectors have attracted great interest due to their narrow bandgap (1.2 eV), low cost, and ease of fabrication. However, there has been insufficient theoretical analysis and study of CuO-based photodetectors, resulting in inferior performance in terms of responsivity, detectivity, and response speed. This work develops a method to enhance the performance of CuO photodetectors by engineering a grain structure based on a newly-developed theoretical model. In the developed theoretical grain-structure model, the grain size and the connections between grains are considered because they can strongly affect the optoelectronic characteristics of CuO photodetectors. Based upon the proposed model, the engineered CuO device achieves enhanced optoelectronic performance. The engineered device shows high responsivity of 15.3 A/W and detectivity of 1.08 × 10¹¹ Jones, which are 18 and 50 times better than those of the unoptimized device, and also shows fast rising and decaying response speeds of 0.682 s and 1.77 s, respectively. In addition, the proposed method is suitable for the mass-production of performance-enhanced, reliable photodetectors. By using a conventional semiconductor fabrication process, a photodetector-array is demonstrated on a 4-inch wafer. The fabricated devices show uniform, high, and stable optoelectronic performance for a month.

Chemical Vapor-Deposited Vanadium Pentoxide Nanosheets with Highly Stable and Low Switching Voltages for Effective Selector Devices

Recently, attempts to overcome the physical limits of memory devices have led to the development of promising materials and architectures for next-generation memory technology. The selector device is one of the essential ingredients of high-density stacked memory systems. However, complicated constituent deposition conditions and thermal degradation are problematic, even with effective selector device materials. Herein, we demonstrate the highly stable and low-threshold voltages of vanadium pentoxide (V₂O₅) nanosheets synthesized by facile chemical vapor deposition, which have not been previously reported on the threshold switching (TS) properties. The electrons occupying trap sites in poly-crystalline V₂O₅ nanosheet contribute to the perfectly symmetric TS feature at the bias polarity and low-threshold voltages in V₂O₅, confirmed by high-resolution transmission electron microscopy measurements. Furthermore, we find an additional PdO interlayer in V₂O₅ nanodevices connected with a Pd/Au electrode after thermal annealing treatment. The PdO interlayer decreases the threshold voltages, and the I_on/ I_off ratio increases because of the increased trap density of V₂O₅. These studies provide insights into V₂O₅ switching characteristics, which can support low power consumption in nonvolatile memory devices.

Photoelectric Detectors Based on Inorganic p-Type Semiconductor Materials

Photoelectric detectors are the central part of modern photodetection systems with numerous commercial and scientific applications. p-Type semiconductor materials play important roles in optoelectronic devices. Photodetectors based on p-type semiconductor materials have attracted a great deal of attention in recent years because of their unique properties. Here, a comprehensive summary of the recent progress mainly on photodetectors based on inorganic p-type semiconductor materials is presented. Various structures, including photoconductors, phototransistors, homojunctions, heterojunctions, p-i-n junctions, and metal-semiconductor junctions of photodetectors based on inorganic p-type semiconductor materials, are discussed and summarized. Perspectives and an outlook, highlighting the promising future directions of this research field, are also given.