Long-term clinical outcome of sacral chondrosarcoma treated by total en bloc sacrectomy and reconstruction of lumbosacral and pelvic ring using intraoperative extracorporeal irradiated autologous tumor-bearing sacrum: a case report with 10 years follow-up

Is 3D-printed self-stabilizing endoprosthesis reconstruction without supplemental fixation following total sacrectomy a viable approach for sacral tumours?

PURPOSE

The spinopelvic reconstruction poses significant challenges following total sacrectomy in patients with malignant or aggressive benign bone tumours encompassing the entire sacrum. In this study, we aim to assess the functional outcomes and complications of an integrated 3D-printed sacral endoprostheses featuring a self-stabilizing design, eliminating the requirement for supplemental fixation.

METHODS

We retrospectively analyzed patients with sacral tumours who underwent total sacrectomy followed by reconstruction with 3D-printed self-stabilizing endoprosthesis. Clinically, we evaluated functional outcomes using the 1993 version of the musculoskeletal tumour society (MSTS-93) score. Perioperative and postoperative complications were also documented.

RESULTS

10 patients met final inclusion criteria. The median age was 49 years (range, 31-64 years). The median follow-up time was 26.5 months (range, 15-47 months). Median postoperative functional MSTS-93 was 22.5 (range, 13-25). The median operation time was 399.5 min (305-576 min), and the median intraoperative blood loss was and 3200 ml (2400-7800 ml). Complications include wound dehiscence in one patient, bowel, bladder, and sexual dysfunction in four patients, cerebrospinal fluid leak in one patient, and tumour recurrence in one patient. There were no mechanical complications related to the endoprosthesis at the last follow-up.

CONCLUSION

The utilization of 3D-printed self-stabilizing endoprosthesis proved to be a viable approach, yielding satisfactory short-term outcomes in patients undergoing total sacral reconstruction without supplemental fixation.

Use of a 3D-Printed Patient-Specific Surgical Jig and Ready-Made Total Sacral Endoprosthesis for Total Sacrectomy and Reconstruction

Objective

In the present study, the authors aimed to optimize the workflow of utilizing a 3D printing technique during surgical treatment for malignant sacral tumors, mainly on preparation of patient-specific surgical jigs and ready-made 3D-printed total sacral endoprosthesis.

Methods

Three patients with a malignant sacral tumor received total sacrectomy with preoperative design of a patient-specific 3D-printed cutting jig and endoprosthetic reconstruction. Size of ready-made 3D-printed endoprosthesis was determined based on preoperative images, planned surgical margin, and size of the endoprosthesis. A patient-specific cutting jig was designed with a bilateral cutting slot matching the bilateral planes of the implant precisely. The tumor was removed en bloc through a single posterior approach only, being followed by reconstruction with ready-made total sacral endoprosthesis.

Results

The mean time for preoperative design and manufacture of the surgical jig was 6.3 days. Surgical jigs were successfully used during surgery and facilitated the osteotomy. The mean operation time was 177 minutes (range 150-190 minutes). The mean blood loss was 3733 ml (range 3600-4000 ml). R0 resections were achieved in all the three cases proven by pathology. Evaluation of osteotomy accuracy was conducted by comparing preoperative plans and postoperative CT scans. The mean osteotomy deviation was 2.1 mm (range 0-4 mm), and mean angle deviation of osteotomy was 3.2° (range 0-10°). At a mean follow-up of 18.7 months, no local recurrence was observed. One patient had lung metastasis 15 months after surgery. Two patients were alive with no evidence of the disease.

Conclusions

The patient-specific surgical jig and ready-made 3D-printed total sacral endoprosthesis can shorten the surgical preparation time preoperatively, facilitating accurate osteotomy and efficient reconstruction intraoperatively. The workflow seems to be feasible and practical.

Refractory recurrent spinal chondrosarcoma: What is the role of salvage surgery?

BACKGROUND

The spinal chondrosarcoma has high risk of recurrence if the initial surgery is not performed in an en bloc fashion. It remains technically demanding to surgically manage the refractory recurrent spinal chondrosarcoma (RRSC). This study is to assess the clinical features and investigate the prognostic factors for patients with RRSCs.

METHODS

forty-nine patients with RRSCs underwent salvage surgeries in our institution, and the clinical characteristics were collected and recorded by two independent reviewers. Univariate and multivariate analyses were performed to investigate the independent prognostic factors of recurrence-free survival (RFS) and overall survival (OS) for patients with RRSCs.

RESULTS

During the mean follow-up of 31.7 ± 21.04 months (Range 9-93), the 3-year RFS and OS rate was 24.5% and 34.5%, respectively. According to the Cox proportional hazards regression model, wide excision with tumor-free margin (>4 mm) was associated with both better RFS and OS for patients with RRSCs. Meanwhile, the number of recurrences ≤2 was beneficial to RFS, while high pathological grade was correlated with worse OS.

CONCLUSIONS

Wide excision with tumor-free margin (>4 mm) is recommendable if appropriate in the salvage surgery for patients with RRSCs. Patients with number of recurrences ≤ 2 and lower pathological grade may have better RFS and OS, respectively.

Pelvic Chondrosarcoma Treated by En Bloc Resection with Patient-Specific Osteotomy Guides and Reimplantation of the Extracorporeally Irradiated Bone as an Osseocartilaginous Structural Orthotopic Autograft: A Report of Two Cases with Description of the Surgical Technique

Primary tumors of the pelvis are considered difficult to treat due to the complex anatomy and the proximity of important neurovascular structures. The surgical armamentarium for the treatment of these tumors has evolved with the help of cutting-edge technology from debilitating hemipelvectomies to solutions such as precise resections guided by patient-specific instruments or computer navigation and reconstruction by modular prostheses, 3D-printed custom-made implants, or orthotopic autograft reimplantation after extracorporeal irradiation. Different combinations of these techniques have been described in the literature with various rates of success. We present two cases of pelvic chondrosarcomas successfully treated by a combination of periacetabular resection with patient-specific osteotomy guides and orthotopic reimplantation of the extracorporeally irradiated autograft resulting in retention of the native hip.

Compassionate use of a custom 3D-printed sacral implant for revision of failing sacrectomy: case report

Reconstruction of the spinopelvic continuity after sacral resection for primary sacral tumors remains challenging. Complex anatomical and biomechanical factors of this transition zone may be addressed with the advancement of 3D-printed implants. Here, the authors report on a 67-year-old patient with a sacral chordoma who initially underwent total en bloc sacrectomy followed by standard spinopelvic reconstruction. Pseudarthrosis and instrumentation failure of the lumbosacral junction construct subsequently developed. A custom 3D-printed sacral prosthesis was created using high-resolution CT images. Emergency Food and Drug Administration approval was obtained, and the custom device was implanted as a salvage reconstruction surgery. Made of porous titanium mesh, the custom artificial sacrum was placed in the defect based on the anticipated osteotomic planes and was fixed with a screw-rod system along with a fibular bone strut graft. At the 18-month follow-up, the patient was disease free and walking short distances with assistance. CT revealed excellent bony incorporation into the graft.The use of a custom 3D-printed prosthesis in spinal reconstruction has been rarely reported, and its application in sacral reconstruction and long-term outcome are novel. While the implant was believed to be critical in endowing the region with enough biomechanical stability to promote healing, the procedure was difficult and several key learning points were discovered along the way.

Surgical treatment of metastatic mesenchymal chondrosarcoma to the spine: A case report

INTRODUCTION

Metastatic mesenchymal chondrosarcoma of the spine is a highly unusual disease without standard curative managements yet. The objective of this case report is to present a very rare case of metastatic chondrosarcoma to the spine successfully operated by surgical treatment. The management of these unique cases has yet to be well-documented.

PATIENT CONCERNS

A 34-year-old woman presented with a 4-month history of continuous and progressive back pain and a 1-month history of radiating pain of bilateral lower extremities. The patient, who had been diagnosed of mesenchymal chondrosarcoma of maxillary sinus for 3 years, received surgical treatment of palliative endoscopic-assisted total left maxillary resection via mini Caldwell-Luc approach, and palliative enlarged resection due to the progress of residual lesions, followed by no adjuvant therapy. Multiple lytic, expanding lesions of the spine and paraspinal region with severe epidural spinal cord compression was identified.

DIAGNOSIS

CT, MRI and bone scan of spine showed spinal cord compression secondary to the epidural component of the metastatic lesions. Post-operative pathology confirmed the diagnosis of metastatic spinal mesenchymal chondrosarcomas.

INTERVENTIONS

The patient underwent posterior spinal canal decompression, resection of T12 and L3 lesions, internal fixation of T11-L5 pedicles, and cement augmentation of T12 and L3.

OUTCOMES

The patient's neurological deficits improved significantly after the surgery, and the postoperative period was uneventful at the 1-year follow-up visit. There were no complications associated with the spinal surgery during the follow-up period.

CONCLUSION

Metastatic spinal mesenchymal chondrosarcoma, although rare, should be part of the differential diagnosis when the patient presents with back pain and radiculopathy. We recommend the posterior approach for spinal decompression and total resection of the metastatic chondrosarcoma when the tumor has caused neurological deficits or other severe symptoms. Osteoplasty by cement augmentation is also a good choice for surgical treatment in some patients.

Surgical treatment of chondrosarcoma of the sacrum with cement augmentation: A case report

RATIONALE

Chondrosarcoma of the sacrum is a highly unusual disease without standard curative managements yet. The objective of this study is to report a very rare case of chondrosarcoma of the sacrum successfully operated by percutaneous vertebroplasty. The management of these unique cases has yet to be well-documented.

PATIENT CONCERNS

A 45-year-old woman presented with a five-month history of continuous and progressive pain and numbness of left extremity. A lytic, expanding lesion of the sacrum and paraspinal region with severe epidural spinal cord compression was identified.

DIAGNOSIS

MRI of spine showed spinal cord compression secondary to the epidural componant of the giant mass, with increased marrow infiltration of the left S2 vertebral and paravertebral region, which presented as a solid tumor. Post-operative pathology confirmed the diagnosis of sacral well-differentiated chondrosarcoma (stage I B).

INTERVENTIONS

The patient underwent percutaneous vertebroplasty and cement augmentation of sacrum via a posterior approach.

OUTCOMES

The patient's neurological deficits improved significantly after the surgery, but the patient died of multiple systemic metastases at the 2-year follow-up visit. There were no complications associated with the operation during the follow-up period.

LESSONS

Taken together, the lesion's clinical features, imaging results, and pathological characteristics are unique. Combined efforts of specialists from orthopedics, radiology, neurosurgery, pathology, and medical oncology led to the successful diagnosis and management of this patient. Giant sacral chondrosarcoma, although rare, should be part of the differential diagnosis when the patient presents with back pain and radiculopathy. We recommend the posterior approach for spinal decompression of the sacral chondrosarcoma when the tumor has caused neurological deficits or other severe symptoms. Osteoplasty by cement augmentation is also a good choice for surgical treatment.

Reconstruction of the pelvic ring after total en bloc sacrectomy using a 3D-printed sacral endoprosthesis with re-establishment of spinopelvic stability: a retrospective comparative study

AIMS

The aim of this study was to describe the use of 3D-printed sacral endoprostheses to reconstruct the pelvic ring and re-establish spinopelvic stability after total en bloc sacrectomy (TES) and to review its outcome.

PATIENTS AND METHODS

We retrospectively reviewed 32 patients who underwent TES in our hospital between January 2015 and December 2017. We divided the patients into three groups on the basis of the method of reconstruction: an endoprosthesis group (n = 10); a combined reconstruction group (n = 14), who underwent non-endoprosthetic combined reconstruction, including anterior spinal column fixation; and a spinopelvic fixation (SPF) group (n = 8), who underwent only SPF. Spinopelvic stability, implant survival (IS), intraoperative haemorrhage rate, and perioperative complication rate in the endoprosthesis group were documented and compared with those of other two groups.

RESULTS

The mean overall follow-up was 22.1 months (9 to 44). In the endoprosthesis group, the mean intraoperative hemorrhage was 3530 ml (1600 to 8100). Perioperative complications occurred in two patients; both had problems with wound healing. After a mean follow-up of 17.7 months (12 to 38), 9/10 patients could walk without aids and 8/10 patients were not using analgesics. Imaging evidence of implant failure was found in three patients, all of whom had breakage of screws and/or rods. Only one of these, who had a local recurrence, underwent re-operation, at which solid bone-endoprosthetic osseointegration was found. The mean IS using re-operation as the endpoint was 32.5 months (95% confidence interval 23.2 to 41.8). Compared with the other two groups, the endoprosthesis group had significantly better spinopelvic stability and IS with no greater intraoperative haemorrhage or perioperative complications.

CONCLUSION

The use of 3D-printed endoprostheses for reconstruction after TES provides reliable spinopelvic stability and IS by facilitating osseointegration at the bone-implant interfaces, with acceptable levels of haemorrhage and complications. Cite this article: Bone Joint J 2019;101-B:880-888.

Extracorporeal radiation and reimplantation: a safe and viable option for reconstruction after sacral tumor resection?

Primary tumors of the sacrum are difficult to manage, as they often require morbid resections and complex reconstructions. In the case of tumors such as chordoma or chondrosarcoma, aggressive resections are often required to achieve appropriate margins (extending disease-free survival), followed by complex reconstructions. These reconstructions are aimed at restoring the pelvic ring and have traditionally resulted in a lumbosacral construct that utilizes structural allograft/autograft bone (fibula most commonly used) and more recently, reconstruction with 3D-printed custom sacral prostheses. While there are no reports of anatomical reconstruction using sacral allografts, extracorporeal radiation therapy (ECRT) and reimplantation provides a size and shape-matched irradiated autograft which avoids the cultural stigma, structural strength and graft-host concerns associated with allografts, as well as the high costs and time to production associated with custom 3D-printed implants. Here we present an illustrative case with technical notes, outlining the steps used at our center for ECRT. While early results with ECRT in the sacrum are promising, future larger studies should be carried out to help detect differences that may exist in long-term complications.

Patient-Specific Three-Dimensional Model for a Safe Surgical Pathway in Sacral Chondrosarcoma

Sacral tumors are amongst the most challenging procedures to treat because of the complex anatomy. This study determined whether patient-specific models change preoperative planning decisions made in preparation for en bloc resection of complex sacral mass surgical procedures. Imaging showed a big encapsulated mass at the S2-3 level involving the neural foramina and obscuring the nerve roots. High-resolution images were acquired and utilized to generate a patient-specific 3D tumor model. The visual and tactile inspection of 3D models allowed the best anatomical understanding, with faster and clearer comprehension of the surgical anatomy. The 3D sacral model was for observation of previously unapparent anatomical details; with this new technology, surgeon can observe their planned surgical intervention, explore the patient-specific anatomy and extension of the tumor, and sharpen their procedure choices. Moreover, multiple planes showed how far the angles on the plane would extend for osteotomy of the sacrum. Another result was identifying correct guides and safe venture landmarks. The study helped to establish safe osteotomy line wherever the nerve roots were retained and enabled osteotomy by preserving bilaterally the S1 and S2 nerve roots for wide excision of wide excision of primary sacral tumor to get adequate bowel and bladder functions. Finally, it helped to determine whether or not the remaining bone in the sacrum is sufficient for spinopelvic stability and needed fixation. It was decided spinopelvic fixation was not necessary for this case. Surgical intervention of sacral tumors varies depending on the tumor, its size, extension, and location. Surgery can have profound risks including unnecessary nerve root resection spinopelvic instability and suboptimal oncological resection. 3D models help to transfer complex anatomical information to clinicians and provide guidance in the preoperative planning stage, for intraoperative navigation and for surgical training purposes.

Surgical Techniques and Associated Outcomes of Primary Chondrosarcoma of the Spine

BACKGROUND

Only a few case reports and case series exist reporting on primary chondrosarcomas of the spine. The objective of this study was to gain a better understanding of this patient population and surgical techniques used for treatment.

METHODS

A systematic literature search was performed in January 2018 querying several scientific databases, per PRISMA guidelines. Surgery type was categorized into en bloc, piecemeal excision, or non-en bloc or piecemeal excision.

RESULTS

In total, 34 records and 3 patients were included in the systematic review, yielding 87 patients with primary chondrosarcoma of the spine. The mean age was 41.5 years, with the tumor most commonly arising in adult patients (90.8%, 79/87); most were male (66.7%, 58/87). Those who underwent piecemeal excision had the highest death rate (56.7%, P ≤ 0.001) and highest rate of recurrence (63.3%, P ≤ 0.001) compared with en bloc and non-en bloc or piecemeal excision. The calculated reduced relative risk (RR) comparing en bloc with the other surgical techniques for recurrence and mortality was 78.8% (RR, 0.21; P ≤ 0.001) and 80.7% (RR, 0.19; P≤ 0.001), respectively. Survival analysis showed patients with a piecemeal excision had 9.4 times hazards ratio for death compared with en bloc (P = 0.001).

CONCLUSIONS

CS is a rare lesion that most commonly presents in adult male patients. En bloc surgical resection was associated with a significant decrease in recurrence, mortality, and increased survival compared with the other surgical techniques. In addition, any surgical technique that involved entering the tumor capsule showed a significantly greater risk for recurrence and death.

Surgery Combined with Radiotherapy to Treat Spinal Tumors: A Review of Published Reports

Spinal tumors result in high morbidity and a high rate of lower limb paralysis. Both surgical therapy and radiation therapy (RT) are used to treat spinal tumors; however, how best to combine these two therapies to maximize the benefits and minimize the risks is still being debated. It is also difficult to decide the optimal timing, course and dose of RT, especially in pregnant women and children. The aim of this review is to assist surgeons who are dealing with spinal tumors by providing comprehensive information about advanced techniques for administering RT with greater precision and safety, and about the impact of various ways of combining surgery and RT on therapeutic outcomes. We here review published reports about treating spinal tumors with a combination of these two forms of therapy and attempt to draw appropriate conclusions concerning selection of optimal treatment protocols. Our conclusion is that postoperative radiotherapy, especially with high-precision, low-dose and multiple fractions, and brachytherapy are promising therapies to combined with surgery.

Sacral Osteoneogenesis after Complete Sacrectomy in a Patient with Ewing Sarcoma

Ewing sarcomas are the second most common primary malignant bone tumors in childhood and adolescence which rapidly metastasize. Due to improvement of treatment options in recent years, the survival rate has significantly increased. Nevertheless, lethality is still high, and neurologic symptoms are frequent. To the best of our knowledge, this is the first reported case of a sacral osteoneogenesis after complete sacrectomy in a patient with Ewing sarcoma.

One-step reconstruction with a 3D-printed, custom-made prosthesis after total en bloc sacrectomy: a technical note

BACKGROUND

Surgeries for primary malignancies involving upper sacrum require total en bloc sacrectomy followed by complex mechanical reconstruction, which might be simplified by application of the three-dimensional (3D) printing technique.

PURPOSES

To describe the design of a 3D-printed custom-made prosthesis for reconstruction after total en bloc sacrectomy, the surgical technique, and the clinical and functional outcome of a patient.

METHODS

A 62-year-old patient with recurrent sacral chordoma was admitted in our center. One-stage total en bloc sacrectomy through posterior approach was planned, and a 3D-printed sacral prosthesis was prepared for reconstruction according to the anticipated osteotomic planes.

RESULTS

The patient received one-stage total en bloc sacrectomy through posterior approach followed by reconstruction with the 3D-printed sacral prosthesis. The whole procedure took 5 h, and intra-operative blood loss was 3400 ml. The patient recovered uneventfully and started ambulation at 3 weeks after surgery. An asymptomatic instrument failure was found radiographically at 8-month follow-up. At 1 year after surgery, the patient was disease free and could walk over short distance with crutches without pain or any mechanical instability.

CONCLUSIONS

The advantages of our reconstruction method included: (1) the prosthesis provided an optimal reconstruction of lumbosacral and pelvic ring by integrating spinal pelvic fixation, posterior pelvic ring fixation, and anterior spinal column fixation in one step and (2) its porous surface could induce bone ingrowth and might enhance stability. Although there was an instrumental failure, we considered that it could be one reconstructive option. More research is warranted focusing on the modification of locations, diameters, and quantity of screws and biomechanical characteristics. The long-term functional and bone in-growth outcome will be followed to validate the use of the prosthesis.