Comparison of 3D-printed titanium-alloy, standard titanium-alloy, and PEEK interbody spacers in an ovine model

Current update and trend of 3D printing in spinal surgery: A bibliometric analysis and review of literature

Incorporation of three-dimensional (3D) printing technology into the field of spinal surgery is on the rise. A bibliometric analysis of the current topic was carried out to elaborate the trend and to navigate future research. A Scopus database search was conducted with keywords related to 3D printing, spine, and surgery. The final 792 articles were extracted and further analyzed with VOSviewer 1.6.19 and Biblioshiny. The first published article was in 2002. A notable increase in articles in 2014 might be attributable to the availability of cheaper 3D printers which rose significantly on a global scale in 2011. China leads in terms of published research on 3D printing in spinal surgery, followed by the US, Australia, and India. The author's keyword co-occurrence analysis reveals 8 theme clusters, including preoperative and intraoperative measures, biomodelling, spinal neoplasms, biomechanics of 3D-printed materials, degenerative spinal diseases, minimally invasive surgery, and bioprinting. The top 15 of the most recently cited keywords are listed to provide future researchers to produce impactful articles. Two strategic diagrams of 2 periods (2002-2018 and 2018-2023) show the theme's evolution. We found 6 consistent themes in keyword co-occurrence analysis and the strategic diagram analysis, that are promising subjects for future research. Overall, this bibliographic study indicates the expanding importance of 3D printing in spinal surgery and suggests several critical themes and impactful keywords for future researchers.

Powder Bed Fusion 3D Printing in Precision Manufacturing for Biomedical Applications: A Comprehensive Review

Precision manufacturing requirements are the key to ensuring the quality and reliability of biomedical implants. The powder bed fusion (PBF) technique offers a promising solution, enabling the creation of complex, patient-specific implants with a high degree of precision. This technology is revolutionizing the biomedical industry, paving the way for a new era of personalized medicine. This review explores and details powder bed fusion 3D printing and its application in the biomedical field. It begins with an introduction to the powder bed fusion 3D-printing technology and its various classifications. Later, it analyzes the numerous fields in which powder bed fusion 3D printing has been successfully deployed where precision components are required, including the fabrication of personalized implants and scaffolds for tissue engineering. This review also discusses the potential advantages and limitations for using the powder bed fusion 3D-printing technology in terms of precision, customization, and cost effectiveness. In addition, it highlights the current challenges and prospects of the powder bed fusion 3D-printing technology. This work offers valuable insights for researchers engaged in the field, aiming to contribute to the advancement of the powder bed fusion 3D-printing technology in the context of precision manufacturing for biomedical applications.

Comparison between Three-Dimensional Printed Titanium and PEEK Cages for Cervical and Lumbar Interbody Fusion: A Prospective Controlled Trial

OBJECTIVES

The three-dimensional printing titanium (3DPT) cage with excellent biomechanical properties and osseointegration capabilities has been initially used in spinal fusion, while the polyetheretherketone (PEEK) cage, a bioinert material device, has been a widely used for decades with relatively excellent clinical outcomes. This study was performed to investigate the early radiographic and clinical outcomes of 3DPT cage versus PEEK cage in patients undergoing anterior cervical discectomy and fusion (ACDF) and transforaminal lumbar interbody fusion (TLIF).

METHODS

This prospective controlled trial, from December 2019 to June 2022, included patients undergoing ACDF and TLIF with 3DPT cages and compared them to patients using PEEK cages for treating spinal degenerative disorders. The outcome measures included radiographic parameters (intervertebral height [IH], subsidence, fusion status, and bone-cage interface contact) and clinical outcomes (Japanese Orthopaedic Association [JOA], Neck Disability Index [NDI], Oswestry Disability Index [ODI], Short Form 12-Item Survey [SF-12], Visual Analog Scale [VAS], and Odom's criteria). Student's independent samples t test and Pearson's chi-square test were used to compare the outcome measures between the two groups before surgery and at 1 week, 3 and 6 months after surgery.

RESULTS

For the patients undergoing ACDF, the 3DPT (18 patients/[26 segments]) and PEEK groups (18 patients/[26 segments]) had similar fusion rates at 3 months and 6 months follow-up (3 months: 96.2% vs. 83.3%, p = 0.182; 6 months: 100% vs. 91.7%, p = 0.225). The subsidence in the 3DPT group was significantly lower than that in the PEEK group (3 months: 0.4 ± 0.2 mm vs. 0.9 ± 0.7 mm p = 0.004; 6 months: 0.7 ± 0.3 mm vs. 1.5 ± 0.8 mm, p < 0.001). 3DPT and PEEK cage all achieved sufficient contact with the cervical endplates. For the patients undergoing TLIF, the 3DPT (20 patients/[26 segments]) and PEEK groups (20 patients/[24 segments]) had no statistical difference in fusion rate (3 months: 84.6% vs. 58.3%, p = 0.059; 6 months: 92.3% vs. 75%, p = 0.132). The subsidence was lower than that in the PEEK group without significantly difference (3 months: 0.9 ± 0.7 mm vs.1.2 ± 0.9 mm p = 0.136; 6 months: 1.6 ± 1.0 mm vs. 2.0 ± 1.0 mm, p = 0.200). At the 3-month follow-up, the bone-cage interface contact of the 3DPT cage was significantly better than that of the PEEK cage (poor contact: 15.4% vs. 75%, p < 0.001). The values of UAR were higher in the 3DPT group than in the PEEK group during the follow-up in cervical and lumbar fusion, there were more statistical differences in lumbar fusion. There were no significant differences in the clinical assessment between 3DPT or PEEK cage in spinal fusion.

CONCLUSION

The 3DPT cage and PEEK cage can achieve excellent clinical outcomes in cervical and lumbar fusion. The 3DPT cage has advantage in fusion quality, subsidence severity, and bone-cage interface contact than PEEK cage.

Three-Dimensional-Printed Titanium Versus Polyetheretherketone Cages for Lumbar Interbody Fusion: A Systematic Review of Comparative In Vitro, Animal, and Human Studies

Interbody fusion is a workhorse technique in lumbar spine surgery that facilities indirect decompression, sagittal plane realignment, and successful bony fusion. The 2 most commonly employed cage materials are titanium (Ti) alloy and polyetheretherketone (PEEK). While Ti alloy implants have superior osteoinductive properties they more poorly match the biomechanical properties of cancellous bones. Newly developed 3-dimensional (3D)-printed porous titanium (3D-pTi) address this disadvantage and are proposed as a new standard for lumbar interbody fusion (LIF) devices. In the present study, the literature directly comparing 3D-pTi and PEEK interbody devices is systematically reviewed with a focus on fusion outcomes and subsidence rates reported in the in vitro, animal, and human literature. A systematic review directly comparing outcomes of PEEK and 3D-pTi interbody spinal cages was performed. PubMed, Embase, and Cochrane Library databases were searched according to PRISMA (Preferred Reporting Items for Systematic Reviews and Meta-Analysis) guidelines. Mean Newcastle-Ottawa Scale score for cohort studies was 6.4. A total of 7 eligible studies were included, comprising a combination of clinical series, ovine animal data, and in vitro biomechanical studies. There was a total population of 299 human and 59 ovine subjects, with 134 human (44.8%) and 38 (64.4%) ovine models implanted with 3D-pTi cages. Of the 7 studies, 6 reported overall outcomes in favor of 3D-pTi compared to PEEK, including subsidence and osseointegration, while 1 study reported neutral outcomes for device related revision and reoperation rate. Though limited data are available, the current literature supports 3D-pTi interbodies as offering superior fusion outcomes relative to PEEK interbodies for LIF without increasing subsidence or reoperation risk. Histologic evidence suggests 3D-Ti to have superior osteoinductive properties that may underlie these superior outcomes, but additional clinical investigation is merited.

Changes in psoas and posterior paraspinal muscle morphology after standalone lateral lumbar interbody fusion: a quantitative MRI-based analysis

PURPOSE

Standalone lateral lumbar interbody fusion (SA-LLIF) without posterior instrumentation can be an alternative to 360° fusion in selected cases. This study aimed to investigate quantitative changes in psoas and paraspinal muscle morphology that occur on index levels after SA-LLIF.

METHODS

Patients undergoing single- or multi-level SA-LLIF at L2/3 to L4/5 who had preoperative and postoperative lumbar MRI scans, the latter performed between 3 and 18 months after surgery for any reason, were retrospectively included. Muscle measurements were performed of the psoas and posterior paraspinal muscles (PPM; erector spinae and multifidus) on index levels using manual segmentation and an automated pixel intensity threshold method to differentiate muscle from fat signal. Changes in the total cross-sectional area (TCSA), the functional cross-sectional area (FCSA), and the percentage of fat infiltration (FI) of these muscles were assessed.

RESULTS

A total of 67 patients (55.2% female, age 64.3 ± 10.6 years, BMI 26.9 ± 5.0 kg/m2) with 125 operated levels were included. Follow-up MRI scans were performed after an average of 8.7 ± 4.6 months, primarily for low back pain. Psoas muscle parameters did not change significantly, irrespective of the approach side. Among PPM parameters, the mean TCSA at L4/5 (+ 4.8 ± 12.4%; p = 0.013), and mean FI at L3/4 (+ 3.1 ± 6.5%; p = 0.002) and L4/5 (+ 3.0 ± 7.0%; p = 0.002) significantly increased.

CONCLUSION

Our study demonstrated that SA-LLIF did not alter psoas muscle morphology, underlining its minimally invasive nature. However, FI of PPM significantly increased over time despite the lack of direct tissue damage to posterior structures, suggesting a pain-mediated response and/or the result of segmental immobilization.

Biportal endoscopic extraforaminal lumbar interbody fusion using a 3D-printed porous titanium cage with large footprints: technical note and preliminary results

PURPOSE

The aim of this study was to introduce biportal endoscopic extraforaminal lumbar interbody fusion (BE-EFLIF), which involves insertion of a cage through a more lateral side as compared to the conventional corridor of transforaminal lumbar interbody fusion. We described the advantages and surgical steps of 3D-printed porous titanium cage with large footprints insertion through multi-portal approach, and preliminary results of this technique.

METHODS

This retrospective study included 12 consecutive patients who underwent BE-EFLIF for symptomatic single-level lumbar degenerative disease. Clinical outcomes, including a visual analog scale (VAS) for back and leg pain and the Oswestry disability index (ODI), were collected at preoperative months 1 and 3, and 6 months postoperatively. In addition, perioperative data and radiographic parameters were analyzed.

RESULTS

The mean patient age, follow-up period, operation time, and volume of surgical drainage were 68.3 ± 8.4 years, 7.6 ± 2.8 months, 188.3 ± 42.4 min, 92.5 ± 49.6 mL, respectively. There were no transfusion cases. All patients showed significant improvement in VAS and ODI postoperatively, and these were maintained for 6 months after surgery (P < 0.001). The anterior and posterior disc heights significantly increased after surgery (P < 0.001), and the cage was ideally positioned in all patients. There were no incidences of early cage subsidence or other complications.

CONCLUSIONS

BE-EFLIF using a 3D-printed porous titanium cage with large footprints is a feasible option for minimally invasive lumbar interbody fusion. This technique is expected to reduce the risk of cage subsidence and improve the fusion rate.

Research relating to three-dimensional (3D) printing in spine surgery: a bibliometric analysis

PURPOSE

Although numerous publications on three-dimensional printing (3DP) in spine surgery have been published, bibliometric analysis studies are scarce. Thus, this study aimed to present a bibliometric analysis of the status, hot spots, and frontiers of 3DP in spine surgery and associated research disciplines.

METHODS

All publications relating to the utilization of 3DP in spine surgery from 1999 to May 9, 2022, were retrieved from the Web of Science. The bibliometric analysis was performed using CiteSpace software, and information on the country, institution, author, journal, and keywords for each publication was collected.

RESULTS

A total of 270 articles were identified. From 2016 onward, a significant increase in publications on spinal surgery was observed. China was the most productive and influential country (98 publications) and H-index (22), followed by the USA and Australia. The most productive institution was Capital Medical University (9 publications). P. S. D'urso (8 publications, 46 citations) and R. J. Mobbs (8 publications, 39 citations) were the most prolific authors. European Spine Journal contributed the highest number of publications. The eight main clusters were: "rapid prototyping" #0, "3D printed" #1, "spine fusion" #2, "scoliosis" #3, "spine surgery" #4, "patient-specific" #5, "nervous system" #6, and "neuronavigation" #7. The strongest keyword bursts in 3DP in spine surgery were "fixation," "drill template," "instrumentation," "fusion," "complication," and "atlantoaxial instability."

CONCLUSION

This analysis provides information on research trends and frontiers in the application of 3DP in spine surgery, as well as research and collaboration partners, institutions, and countries.

Silica coated high performance oxide ceramics promote greater ossification than titanium implants: an in vivo study

BACKGROUND

This in vitro study investigated the osseointegration and implant integration of high performance oxide ceramics (HPOC) compared to titanium implants in rabbits.

METHODS

Histomorphometry was conducted around the distal, proximal, medial, and lateral aspects of the HPOC to quantify the amount of mature and immature ossification within the bone interface. Histomorphometry was conducted by a trained musculoskeletal pathologist. The region of interest (ROI) represented the percentage of surrounding area of the implant. The percentage of ROI covered by osteoid implant contact (OIC) and mature bone implant contact (BIC) were assessed. The surrounding presence of bone resorption, necrosis, and/or inflammation were quantitatively investigated.

RESULTS

All 34 rabbits survived the 6- and 12-week experimental period. All HPOC implants remained in situ. The mean weight difference from baseline was + 647.7 mg (P < 0.0001). The overall OIC of the ceramic group was greater at 6 weeks compared to the titanium implants (P = 0.003). The other endpoints of interest were similar between the two implants at all follow-up points. No difference was found in BIC at 6- and 12-weeks follow-up. No bone necrosis, resorption, or inflammation were observed.

CONCLUSION

HPOC implants demonstrated a greater osteoid implant contact at 6 weeks compared to the titanium implants, with no difference found at 12 weeks. The percentage of bone implant contact of HPOC implants was similar to that promoted by titanium implants.

Subsidence after lateral lumbar interbody fusion using a 3D-printed porous titanium interbody cage: single-institution case series

OBJECTIVE

Cage subsidence is a well-known phenomenon after lateral lumbar interbody fusion (LLIF), occurring in 10%-20% of cases. A 3D-printed porous titanium (pTi) cage has a stiffness that mimics the modulus of elasticity of native vertebrae, which reduces stress at the bone-hardware interface, lowering the risk of subsidence. In this study, the authors evaluated their institutional rate of subsidence and resultant reoperation in patients who underwent LLIF using a 3D-printed pTi interbody cage.

METHODS

This is a retrospective case series of consecutive adult patients who underwent LLIF using pTi cages from 2018 to 2020. Demographic and clinical characteristics including age, sex, bone mineral density, smoking status, diabetes, steroid use, number of fusion levels, posterior instrumentation, and graft size were collected. The Marchi subsidence grade was determined at the time of last follow-up. Outcome measures of interest were subsidence and resultant reoperation. Univariable logistic regression analysis was performed to assess the extent to which clinical and operative characteristics were associated with Marchi grade I-III subsidence. Significance was assessed at p < 0.05.

RESULTS

Fifty-five patients (38 with degenerative disc disease and 17 with adult spinal deformity) were treated with 97 pTi interbody cages with a mean follow-up of 18 months. The mean age was 63.6 ± 10.1 years, 60% of patients were female, and 36% of patients had osteopenia or osteoporosis. Patients most commonly underwent single-level LLIF (58.2%). Sixteen patients (29.1%) had posterior instrumentation. The subsidence grade distribution was as follows: 89 (92%) grade 0, 5 (5%) grade I, 2 (2%) grade II, and 1 (1%) grade III. No patients who were active or prior smokers and no patients with posterior instrumentation experienced graft subsidence. No clinical or operative characteristics were significantly associated with graft subsidence. One patient (1.8%) required reoperation because of subsidence.

CONCLUSIONS

In this institutional case series, subsidence of pTi intervertebral cages after LLIF occurred in 8% of operated levels, 3% of which were grade II or III. Only 1 patient required reoperation. These reported rates are lower than those reported for polyetheretherketone implants. Further studies are necessary to compare the impact of these cage materials on subsidence after LLIF.

Outstanding in vivo mechanical integrity of additively manufactured spinal cages with a novel "honeycomb tree structure" design via guiding bone matrix orientation

BACKGROUND CONTEXT

Therapeutic devices for spinal disorders, such as spinal fusion cages, must be able to facilitate the maintenance and rapid recovery of spinal function. Therefore, it would be advantageous that future spinal fusion cages facilitate rapid recovery of spinal function without secondary surgery to harvest autologous bone.

PURPOSE

This study investigated a novel spinal cage configuration that achieves in vivo mechanical integrity as a devise/bone complex by inducing bone that mimicked the sound trabecular bone, hierarchically and anisotropically structured trabeculae strengthened with a preferentially oriented extracellular matrix.

STUDY DESIGN/SETTINGS

In vivo animal study.

METHODS

A cage possessing an anisotropic through-pore with a grooved substrate, that we termed "honeycomb tree structure," was designed for guiding bone matrix orientation; it was manufactured using a laser beam powder bed fusion method through an additive manufacturing processes. The newly designed cages were implanted into sheep vertebral bodies for 8 and 16 weeks. An autologous bone was not installed in the newly designed cage. A pull-out test was performed to evaluate the mechanical integrity of the cage/bone interface. Additionally, the preferential orientation of bone matrix consisting of collagen and apatite was determined.

RESULTS

The cage/host bone interface strength assessed by the maximum pull-out load for the novel cage without an autologous bone graft (3360±411 N) was significantly higher than that for the conventional cage using autologous bone (903±188 N) after only 8 weeks post-implantation.

CONCLUSIONS

These results highlight the potential of this novel cage to achieve functional fusion between the cage and host bone. Our study provides insight into the design of highly functional spinal devices based on the anisotropic nature of bone.

CLINICAL SIGNIFICANCE

The sheep spine is similar to the human spine in its stress condition and trabecular bone architecture and is widely recognized as a useful model for the human spine. The present design may be useful as a new spinal device for humans.

Application of Image-Fusion 3D Printing Model in Total En Bloc Spondylectomy for Spinal Malignant Tumors

Purpose

To examine the effects of 3D printing model in total en bloc spondylectomy (TES).

Methods

We performed a retrospective chart review of 41 cases of spinal tumors at our institution between 2017 and 2020, in which TES was applied. There were 19 cases with 3D printing model and 22 cases without 3D printing model. Operation time, intraoperative blood loss, excision range, complications, VAS, and ASIA grades were recorded. Statistical methods were used to analyze the data. KaplanMeier survival curve was made to evaluate the survival.

Result

There were significant differences in intraoperative blood loss between the two groups. The rate of R0 resection and tumor envelope preservation were higher in 3D group than that in non-3D group. In 3D group, the complications included surgical site infection (5.2%) and cerebrospinal fluid leak (15.7%). In non-3D group, the complications included cerebrospinal fluid leak (27.3%) and nerve root injury (13.6%). The pain and neurological dysfunction were significantly relieved before and after surgery in 3D group. However, the neurological relief in non-3D group patients was not complete. The VAS scores of non-3D group at 6 months after surgery were much higher than that of 3D group.

Conclusion

The application of 3D printing model not only helps surgeons observe the morphology, invasion range, and anatomic relationship of the tumor preoperatively, but also assists surgeons to judge, locate, and separate the tumor intraoperatively. For spinal malignancies, the 3D printing model is worth promoting.

Evolution of polyetheretherketone (PEEK) and titanium interbody devices for spinal procedures: a comprehensive review of the literature

INTRODUCTION

Interbody fusion is commonly utilized for arthrodesis and stability among patients undergoing spine surgery. Over the last few decades, interbody device materials, such as titanium and polyetheretherketone (PEEK), have been replacing traditional autografts and allografts for interbody fusion. As such, with the exponential growth of bioengineering, a large variety cage surface technologies exist. Different combinations of cage component materials and surface modifications have been created to optimize interbody constructs for surgical use. This review aims to provide a comprehensive overview of common surface technologies, their performance in the clinical setting, and recent modifications and material combinations.

MATERIALS AND METHODS

We performed a comprehensive review of the literature on titanium and PEEK as medical devices between 1964 and 2021. We searched five major databases, resulting in 4974 records. Articles were screened for inclusion manually by two independent reviewers, resulting in 237 articles included for review.

CONCLUSION

Interbody devices have rapidly evolved over the last few decades. Biomaterial and biomechanical modifications have allowed for continued design optimization. While titanium has a high osseointegrative capacity, it also has a high elastic modulus and is radio-opaque. PEEK, on the other hand, has a lower elastic modulus and is radiolucent, though PEEK has poor osseointegrative capacity. Surface modifications, material development advancements, and hybrid material devices have been utilized in search of an optimal spinal implant which maximizes the advantages and minimizes the disadvantages of each interbody material.

Subsidence and fusion performance of a 3D-printed porous interbody cage with stress-optimized body lattice and microporous endplates - a comprehensive mechanical and biological analysis

BACKGROUND CONTEXT

Cage subsidence remains a serious complication after spinal fusion surgery. Novel porous designs in the cage body or endplate offer attractive options to improve subsidence and osseointegration performance.

PURPOSE

To elucidate the relative contribution of a porous design in each of the two major domains (body and endplates) to cage stiffness and subsidence performance, using standardized mechanical testing methods, and to analyze the fusion progression via an established ovine interbody fusion model to support the mechanical testing findings.

STUDY DESIGN/SETTING

A comparative preclinical study using standardized mechanical testing and established animal model.

METHODS

To isolate the subsidence performance contributed by each porous cage design feature, namely the stress-optimized body lattice (vs. a solid body) and microporous endplates (vs. smooth endplates), four groups of cages (two-by-two combination of these two features) were tested in: (1) static axial compression of the cage (per ASTM F2077) and (2) static subsidence (per ASTM F2267). To evaluate the progression of fusion, titanium cages were created with a microporous endplate and internal lattice architecture analogous to commercial implants used in subsidence testing and implanted in an endplate-sparing, ovine intervertebral body fusion model.

RESULTS

The cage stiffness was reduced by 16.7% by the porous body lattice, and by 16.6% by the microporous endplates. The porous titanium cage with both porous features showed the lowest stiffness with a value of 40.4±0.3 kN/mm (Mean±SEM) and a block stiffness of 1976.8±27.4 N/mm for subsidence. The body lattice showed no significant impact on the block stiffness (1.4% reduction), while the microporous endplates decreased the block stiffness significantly by 24.9% (p<.0001). All segments implanted with porous titanium cages were deemed rigidly fused by manual palpation, except one at 12 weeks, consistent with robotic ROM testing and radiographic and histologic observations. A reduction in ROM was noted from 12 to 26 weeks (4.1±1.6° to 2.2±1.4° in lateral bending, p<.05; 2.1±0.6° to 1.5±0.3° in axial rotation, p<.05); and 3.3±1.6° to 1.9±1.2° in flexion extension, p=.07). Bone in the available void improved with time in the central aperture (54±35% to 83±13%, p<.05) and porous cage structure (19±26% to 37±21%, p=.15).

CONCLUSIONS

Body lattice and microporous endplates features can effectively reduce the cage stiffness, therefore reducing the risk of stress shielding and promoting early fusion. While body lattice showed no impact on block stiffness and the microporous endplates reduced the block stiffness, a titanium cage with microporous endplates and internal lattice supported bone ingrowth and segmental mechanical stability as early as 12 weeks in ovine interbody fusion.

CLINICAL SIGNIFICANCE

Porous titanium cage architecture can offer an attractive solution to increase the available space for bone ingrowth and bridging to support successful spinal fusion while mitigating risks of increased subsidence.

Additive manufacturing against the Covid-19 pandemic: a technological model for the adaptability and networking

This investigation analyzes the main contributions that additive manufacturing (AM) technology provides to the world in fighting against the pandemic COVID-19 from a materials and applications perspective. With this aim, different sources, which include academic reports, initiatives, and industrial companies, have been systematically analyzed. The AM technology applications include protective masks, mechanical ventilator parts, social distancing signage, and parts for detection and disinfection equipment (Ju, 2020). There is a substantially increased number of contributions from AM technology to this global issue, which is expected to continuously increase until a sound solution is found. The materials and manufacturing technologies in addition to the current challenges and opportunities were analyzed as well. These contributions came from a lot of countries, which can be used as a future model to work in massive collaboration, technology networking, and adaptability, all lined up to provide potential solutions for some of the biggest challenges the human society might face in the future.

Improved cell adhesion to activated vapor silanization-biofunctionalized Ti-6Al-4V surfaces with ECM-derived oligopeptides

Titanium implants are widely used in traumatology and various orthopedic fields. Titanium and other metallic-based implants have limited structural and functional integration into the body, which translates into progressive prosthesis instability and the need for new surgical interventions that have enormous social and economic impacts. To enhance the biocompatibility of titanium implants, numerous biofunctionalization strategies have been developed. However, the problem persists, as more than 70% of implant failures are due to aseptic loosening. In this study we addressed the problem of improving the physiological engraftability and acceptability of titanium-based implants by applying a robust and versatile functionalization method based on the covalent immobilization of extracellular matrix (ECM)-derived oligopeptides on Ti-6Al-4V surfaces treated by activated vapor silanization (AVS). The feasibility of this technique was evaluated with two oligopeptides of different structures and compositions. These oligopeptides were immobilized on Ti-6Al-4V substrates by a combination of AVS and N-(3-dimethylaminopropyl)-N'-ethylcarbodiimide hydrochloride/N-hydroxysuccinimide (EDC/NHS) crosslinking chemistry. The immobilization was shown to be stable and resistant to chemical denaturing upon sodium dodecyl sulfate treatment. On Ti-6Al-4V surfaces both peptides increased the attachment, spreading, rearrangement and directional growth of mesenchymal stem and progenitor cells (MSC) with chondro- and osteo-regenerative capacities. We also found that this biofunctionalization method (AVS-EDC/NHS) increased the attachment capacity of an immortalized cell line of neural origin with poor adhesive properties, highlighting the versatility and robustness of this method in terms of potential oligopeptides that may be used, and cell lineages whose anchorage to the biomaterial may be enhanced. Collectively, this novel functionalization strategy can accelerate the development of advanced peptide-functionalized metallic surfaces, which, in combination with host or exogenously implanted stem cells, have the potential to positively affect the osteoregenerative and osteointegrative abilities of metallic-based prostheses.