The leucine-rich repeat domain of Internalin B folds along a polarized N-terminal pathway

A Closer Look at Type I Left-Handed β-Helices Provides a Better Understanding in Their Sequence-Structure Relationship: Toward Their Rational Design

Understanding the sequence-structure relationship in protein is of fundamental interest, but has practical applications such as the rational design of peptides and proteins. This relationship in the Type I left-handed β-helix containing proteins is updated and revisited in this study. Analyzing the available experimental structures in the Protein Data Bank, we could describe, further in detail, the structural features that are important for the stability of this fold, as well as its nucleation and termination. This study is meant to complete previous work, as it provides a separate analysis of the N-terminal and C-terminal rungs of the helix. Particular sequence motifs of these rungs are described along with the structural element they form.

Cooperative mechanics of PR65 scaffold underlies the allosteric regulation of the phosphatase PP2A

PR65, a horseshoe-shaped scaffold composed of 15 HEAT (observed in Huntingtin, elongation factor 3, protein phosphatase 2A, and the yeast kinase TOR1) repeats, forms, together with catalytic and regulatory subunits, the heterotrimeric protein phosphatase PP2A. We examined the role of PR65 in enabling PP2A enzymatic activity with computations at various levels of complexity, including hybrid approaches that combine full-atomic and elastic network models. Our study points to the high flexibility of this scaffold allowing for end-to-end distance fluctuations of 40-50 Å between compact and extended conformations. Notably, the intrinsic dynamics of PR65 facilitates complexation with the catalytic subunit and is retained in the PP2A complex enabling PR65 to engage the two domains of the catalytic subunit and provide the mechanical framework for enzymatic activity, with support from the regulatory subunit. In particular, the intra-repeat coils at the C-terminal arm play an important role in allosterically mediating the collective dynamics of PP2A, pointing to target sites for modulating PR65 function.

Engineering a Minimal Leucine-rich Repeat IgG-binding Module

Sea lamprey immunization can yield leucine-rich repeat (LRR) protein binders analogous to globular antibodies developed from mammals. A novel minimal LRR was discovered through lamprey immunization with human immunoglobulin G Fc domain (IgG Fc). Initial attempts to solubly express this LRR protein, VLRB.IgGFc, in Escherichia coli proved challenging, so it was analyzed using the cell-free method ribosome display. In ribosome display, VLRB.IgGFc was found to bind specifically to the Fc domain of IgG, with little observed cross-reactivity to IgA or IgM. The minimal repeat protein architecture of VLRB.IgGFc may facilitate modular LRR extensions to incorporate additional or augmented functionality within a continuous, structurally defined scaffold. We exploited this modularity to design a chimera of a well-characterized, soluble LRR repebody and the initially insoluble VLRB.IgGFc to produce soluble Repe-VLRB.IgGFc. The minimal IgG Fc-binding module, Repe-VLRB.IgGFc, and future-engineered variants thereof should be useful additions to the biotechnological toolbox for detecting, purifying, or targeting IgGs. More generally, this two-step approach of minimal LRR binder discovery via sea lamprey immunization followed by modular augmentation of functionality may be of general utility in protein engineering.

Leucine Rich Repeat Proteins: Sequences, Mutations, Structures and Diseases

Mutations in the genes encoding Leucine Rich Repeat (LRR) containing proteins are associated with over sixty human diseases; these include high myopia, mitochondrial encephalomyopathy, and Crohn's disease. These mutations occur frequently within the LRR domains and within the regions that shield the hydrophobic core of the LRR domain. The amino acid sequences of fifty-five LRR proteins have been published. They include Nod-Like Receptors (NLRs) such as NLRP1, NLRP3, NLRP14, and Nod-2, Small Leucine Rich Repeat Proteoglycans (SLRPs) such as keratocan, lumican, fibromodulin, PRELP, biglycan, and nyctalopin, and F-box/LRR-repeat proteins such as FBXL2, FBXL4, and FBXL12. For example, 363 missense mutations have been identified. Replacement of arginine, proline, or cysteine by another amino acid, or the reverse, is frequently observed. The diverse effects of the mutations are discussed based on the known structures of LRR proteins. These mutations influence protein folding, aggregation, oligomerization, stability, protein-ligand interactions, disulfide bond formation, and glycosylation. Most of the mutations cause loss of function and a few, gain of function.

A Second Backbone: The Contribution of a Buried Asparagine Ladder to the Global and Local Stability of a Leucine-Rich Repeat Protein

Parallel β-sheet-containing repeat proteins often display a structural motif in which conserved asparagines form a continuous ladder buried within the hydrophobic core. In such "asparagine ladders", the asparagine side-chain amides form a repetitive pattern of hydrogen bonds with neighboring main-chain NH and CO groups. Although asparagine ladders have been thought to be important for stability, there is little experimental evidence to support such speculation. Here we test the contribution of a minimal asparagine ladder from the leucine-rich repeat protein pp32 to stability and investigate lattice rigidity and hydrogen bond character using solution nuclear magnetic resonance (NMR) spectroscopy. Point substitutions of the two ladder asparagines of pp32 are strongly destabilizing and decrease the cooperativity of unfolding. The chemical shifts of the ladder side-chain HZ protons are shifted significantly downfield in the NMR spectrum and have low temperature coefficients, indicative of strong hydrogen bonding. In contrast, the HE protons are shifted upfield and have temperature coefficients close to zero, suggesting an asymmetry in hydrogen bond strength along the ladder. Ladder NH2 groups have weak 1H-15N cross-peak intensities; 1H-15N nuclear Overhauser effect and 15N CPMG experiments show this to be the result of high rigidity. Hydrogen exchange measurements demonstrate that the ladder NH2 groups exchange very slowly, with rates approaching the global exchange limit. Overall, these results show that the asparagine side chains are held in a very rigid, nondynamic structure, making a significant contribution to the overall stability. In this regard, buried asparagine ladders can be considered "second backbones" within the cores of their elongated β-sheet host proteins.

Folding cooperativity and allosteric function in the tandem-repeat protein class

The term allostery was originally developed to describe structural changes in one binding site induced by the interaction of a partner molecule with a distant binding site, and it has been studied in depth in the field of enzymology. Here, we discuss the concept of action at a distance in relation to the folding and function of the solenoid class of tandem-repeat proteins such as tetratricopeptide repeats (TPRs) and ankyrin repeats. Distantly located repeats fold cooperatively, even though only nearest-neighbour interactions exist in these proteins. A number of repeat-protein scaffolds have been reported to display allosteric effects, transferred through the repeat array, that enable them to direct the activity of the multi-subunit enzymes within which they reside. We also highlight a recently identified group of tandem-repeat proteins, the RRPNN subclass of TPRs, recent crystal structures of which indicate that they function as allosteric switches to modulate multiple bacterial quorum-sensing mechanisms. We believe that the folding cooperativity of tandem-repeat proteins and the biophysical mechanisms that transform them into allosteric switches are intimately intertwined. This opinion piece aims to combine our understanding of the two areas and develop ideas on their common underlying principles.This article is part of a discussion meeting issue 'Allostery and molecular machines'.

Tuning the Handedness: Role of Chiral Component in Peptide-Appended Bolaamphiphile-Based Coassembled Hydrogels

Chirality is the intrinsic property of a molecule that can be tuned by the change in chirality of a molecule or by the addition of a chiral component as an external stimulus. An l-leucine-based dipeptide-appended succinic acid-based bolaamphiphile coassembled with d-tartaric acid to form supramolecular right-handed nanostructured hydrogel, whereas l-tartaric acid coassembled to form supramolecular left-handed nanostructured hydrogel. Scanning electron microscopy and transmission electron microscopy experiments revealed the right- and left-handed helical nanofibers that are responsible for the formation of supramolecular nanostructured hydrogels. The synergistic chiral effect of l-leucine in peptide bolaamphiphile and d/l-tartaric acid plays a significant role in bicomponent gelation with helical nanofibers. The first two amino acids attached to both sides of succinic acid moiety act as a tuning button for supramolecular chirality of amino acids/peptides attached with succinic acid-based bolaamphiphiles. The second amino acid plays the role of modulating supramolecular chirality if the first two amino acids act neutrally to the chirality of bolaamphiphiles, which was confirmed by circular dichroism spectroscopy.

Dissecting and reprogramming the folding and assembly of tandem-repeat proteins

Studying protein folding and protein design in globular proteins presents significant challenges because of the two related features, topological complexity and co-operativity. In contrast, tandem-repeat proteins have regular and modular structures composed of linearly arrayed motifs. This means that the biophysics of even giant repeat proteins is highly amenable to dissection and to rational design. Here we discuss what has been learnt about the folding mechanisms of tandem-repeat proteins. The defining features that have emerged are: (i) accessibility of multiple distinct routes between denatured and native states, both at equilibrium and under kinetic conditions; (ii) different routes are favoured for folding compared with unfolding; (iii) unfolding energy barriers are broad, reflecting stepwise unravelling of an array repeat by repeat; (iv) highly co-operative unfolding at equilibrium and the potential for exceptionally high thermodynamic stabilities by introducing consensus residues; (v) under force, helical-repeat structures are very weak with non-co-operative unfolding leading to elasticity and buffering effects. This level of understanding should enable us to create repeat proteins with made-to-measure folding mechanisms, in which one can dial into the sequence the order of repeat folding, number of pathways taken, step size (co-operativity) and fine-structure of the kinetic energy barriers.

Ising Model Reprogramming of a Repeat Protein's Equilibrium Unfolding Pathway

Repeat proteins are formed from units of 20-40 aa that stack together into quasi one-dimensional non-globular structures. This modular repetitive construction means that, unlike globular proteins, a repeat protein's equilibrium folding and thus thermodynamic stability can be analysed using linear Ising models. Typically, homozipper Ising models have been used. These treat the repeat protein as a series of identical interacting subunits (the repeated motifs) that couple together to form the folded protein. However, they cannot describe subunits of differing stabilities. Here we show that a more sophisticated heteropolymer Ising model can be constructed and fitted to two new helix deletion series of consensus tetratricopeptide repeat proteins (CTPRs). This analysis, showing an asymmetric spread of stability between helices within CTPR ensembles, coupled with the Ising model's predictive qualities was then used to guide reprogramming of the unfolding pathway of a variant CTPR protein. The designed behaviour was engineered by introducing destabilising mutations that increased the thermodynamic asymmetry within a CTPR ensemble. The asymmetry caused the terminal α-helix to thermodynamically uncouple from the rest of the protein and preferentially unfold. This produced a specific, highly populated stable intermediate with a putative dimerisation interface. As such it is the first step in designing repeat proteins with function regulated by a conformational switch.

Highly polarized C-terminal transition state of the leucine-rich repeat domain of PP32 is governed by local stability

The leucine-rich repeat domain of PP32 is composed of five β-strand-containing repeats anchored by terminal caps. These repeats differ in sequence but are similar in structure, providing a means to connect topology, sequence, and folding pathway selection. Through kinetic studies of PP32, we find folding to be rate-limited by the formation of an on-pathway intermediate. Destabilizing core substitutions reveal a transition state ensemble that is highly polarized toward the C-terminal repeat and cap. To determine if this nucleus for folding corresponds to the most stable region of PP32, we monitored amide hydrogen exchange by NMR spectroscopy. Indeed, we find the highest protection to be biased toward the C terminus. Sequence manipulations that destabilize the C terminus spread out the transition state toward the middle of the protein. Consistent with results for helical ankyrin repeat proteins, these results suggest that local stabilities determine folding pathways.

Computational design of a leucine-rich repeat protein with a predefined geometry

Structure-based protein design offers a possibility of optimizing the overall shape of engineered binding scaffolds to match their targets better. We developed a computational approach for the structure-based design of repeat proteins that allows for adjustment of geometrical features like length, curvature, and helical twist. By combining sequence optimization of existing repeats and de novo design of capping structures, we designed leucine-rich repeats (LRRs) from the ribonuclease inhibitor (RI) family that assemble into structures with a predefined geometry. The repeat proteins were built from self-compatible LRRs that are designed to interact to form highly curved and planar assemblies. We validated the geometrical design approach by engineering a ring structure constructed from 10 self-compatible repeats. Protein design can also be used to increase our structural understanding of repeat proteins. We use our design constructs to demonstrate that buried Cys play a central role for stability and folding cooperativity in RI-type LRR proteins. The computational procedure presented here may be used to develop repeat proteins with various geometrical shapes for applications where greater control of the interface geometry is desired.

Evolution and design of protein structure by folding nucleus symmetric expansion

Models of symmetric protein evolution typically invoke gene duplication and fusion events, in which repetition of a structural motif generates foldable, stable symmetric protein architecture. Success of such evolutionary processes suggests that the duplicated structural motif must be capable of nucleating protein folding. If correct, symmetric expansion of a folding nucleus sequence derived from an extant symmetric fold may be an elegant and computationally tractable solution to de novo protein design. We report the efficient de novo design of a β-trefoil protein by symmetric expansion of a β-trefoil folding nucleus, previously identified by ɸ-value analysis. The resulting protein, having exact sequence symmetry, exhibits superior folding properties compared to its naturally evolved progenitor-with the potential for redundant folding nuclei. In principle, folding nucleus symmetric expansion can be applied to any given symmetric protein fold (that is, nearly one-third of the known proteome) provided information of the folding nucleus is available.

Falling down: landscape and kinetics of one-dimensional protein folding

In this issue of Structure, Tsytlonok and colleagues describe the folding landscape of the giant HEAT-repeat protein PR65/A (a molecular adaptor of protein phosphatase 2A) by using experimental and theoretical methods. Both approaches agree in suggesting the presence of parallel folding pathways with several intermediates.

Soluble expression of human glycoprotein Ibα in Escherichia coli through replacement of the N-terminal capping domain

Glycoprotein Ibα (GpIbα), a family of LRR (leucine-rich repeat) proteins, is a membrane protein on the platelet, and plays an important role in atherothrombotic events. The complex formation of GpIbα with the von Willebrand Factor (vWF) has been revealed to lead to acute coronary syndrome (ACS) or stroke. A considerable attention has been paid to understand the biological functions of GpIbα and its regulation. However, difficulty with the soluble expression of human GpIbα in bacteria has hampered the relevant research. Herein, we present a soluble expression of GpIbα in Escherichiacoli by replacing the N-terminal capping domain of GpIbα with that of Internalin B using a computational approach. The resulting protein was expressed as a soluble form in E. coli, maintaining its structural feature and binding property for vWF. The present approach can be broadly used for the soluble expression of human LRR proteins in E. coli.

Capping motifs stabilize the leucine-rich repeat protein PP32 and rigidify adjacent repeats

Capping motifs are found to flank most β-strand-containing repeat proteins. To better understand the roles of these capping motifs in organizing structure and stability, we carried out folding and solution NMR studies on the leucine-rich repeat (LRR) domain of PP32, which is composed of five tandem LRR, capped by α-helical and β-hairpin motifs on the N- and C-termini. We were able to purify PP32 constructs lacking either cap and containing destabilizing substitutions. Removing the C-cap results in complete unfolding of PP32. Removing the N-cap has a much less severe effect, decreasing stability but retaining much of its secondary structure. In contrast, the dynamics and tertiary structure of the first two repeats are significantly perturbed, based on (1)H-(15)N relaxation studies, chemical shift perturbations, and residual dipolar couplings. However, more distal repeats (3 to C-cap) retain their native tertiary structure. In this regard, the N-cap drives the folding of adjacent repeats from what appears to be a molten-globule-like state. This interpretation is supported by extensive analysis using core packing substitutions in the full-length and N-cap-truncated PP32. This work highlights the importance of caps to the stability and structural integrity of β-strand-containing LRR proteins, and emphasizes the different contributions of the N- and C-terminal caps.

Repeat protein engineering: creating functional nanostructures/biomaterials from modular building blocks

There is enormous interest in molecular self-assembly and the development of biological systems to form smart nanostructures for biotechnology (so-called 'bottom-up fabrications'). Repeat proteins are ideal choices for development of such systems as they: (i) possess a relatively simple relationship between sequence, structure and function; (ii) are modular and non-globular in structure; (iii) act as diverse scaffolds for the mediation of a diverse range of protein-protein interactions; and (iv) have been extensively studied and successfully engineered and designed. In the present review, we summarize recent advances in the use of engineered repeat proteins in the self-assembly of novel materials, nanostructures and biosensors. In particular, we show that repeat proteins are excellent monomeric programmable building blocks that can be triggered to associate into a range of morphologies and can readily be engineered as stimuli-responsive biofunctional materials.

Crystal structure of an engineered YopM-InlB hybrid protein

Background

The multi-domain protein InlB (internalin B) from Listeria monocytogenes is an agonist of the human receptor tyrosine kinase MET. Only the internalin domain directly interacts with MET. The internalin domain consists of seven central leucine-rich repeats (LRRs) flanked by an N-terminal helical cap domain and a C-terminal immunoglobulin-like structure. A potential function of the N-terminal cap in receptor binding could so far not be demonstrated by deleting the cap, since the cap is also implicated in nucleating folding of the LRR domain.

Results

We generated an InlB variant (YopM-InlB) in which the InlB cap domain was replaced by the unrelated N-terminal capping structure of the LRR protein YopM from Yersinia enterocolitica. The crystal structure of the engineered protein shows that it folds properly. Because the first LRR is structurally closely linked to the cap domain, we exchanged LRR1 along with the cap domain. This resulted in unexpected structural changes extending to LRR2 and LRR3, which are deeply involved in MET binding. As a consequence, the binding of YopM-InlB to MET was substantially weaker than that of wild type InlB. The engineered protein was about one order of magnitude less active in colony scatter assays than wild type InlB.

Conclusions

We obtained a well-behaved InlB variant with an altered N-terminal capping structure through protein design. The reduced affinity for MET precludes a straightforward interpretation of the results from cell-based assays. Still, the engineered hybrid protein induced cell scatter, suggesting that the cap is required for folding and stability of InlB but is not essential for interactions that assemble the signalling-active receptor complex. The cap swap approach described here is clearly applicable to other L. monocytogenes internalins and other LRR proteins such as YopM and may yield useful structure/function correlates within this protein family.

Diffuse transition state structure for the unfolding of a leucine-rich repeat protein

Tandem-repeat proteins, such as leucine-rich repeats, comprise arrays of small structural motifs that pack in a linear fashion to produce elongated architectures. They lack contacts between residues that are distant in primary sequence, a feature that distinguishes them from the complex topologies of globular proteins. Here we have investigated the unfolding pathway of the leucine-rich repeat domain of the mRNA export protein TAP (TAPLRR) using Φ-value analysis. Whereas most of the tandem-repeat proteins studied to date have been found to unfold via a polarised mechanism in which only a small, localised number of repeats are structured in the transition state, the unfolding mechanism of TAPLRR is more diffuse in nature. In the transition state for unfolding of TAPLRR, three of the four LRRs are highly structured and non-native interactions are formed within the N-terminal α-helical cap and the first LRR. Thus, the α-helical cap plays an important role in which non-native interactions are required to provide a scaffold for the LRRs to pack against in the folding reaction.

A designed, phase changing RTX-based peptide for efficient bioseparations

Typically, chromatography is the most costly and time-consuming step in protein purification. As a result, alternative methods have been sought for bioseparations, including the use of stimulus-responsive tags that can reversibly precipitate out of solution in response to the appropriate stimulus. While effective, stimulus-responsive tags tend to require temperature changes or relatively harsh buffer conditions to induce precipitation. Here we describe a synthetic peptide, based on the natural repeat-in-toxin (RTX) domain that undergoes gentler calcium-responsive, reversible precipitation. When coupled to the maltose binding protein (MBP), our calcium-responsive tag efficiently purified the fusion protein. Furthermore, when the MBP was appended to green fluorescent protein (GFP), β-lactamase, or a thermostable alcohol dehydrogenase (AdhD), these constructs could also be purified by calcium-induced precipitation. Finally, protease cleavage of the precipitating tag enables the recovery of pure and active target protein by cycling precipitation before and after cleavage.

Tandem-repeat proteins: regularity plus modularity equals design-ability

Researchers in the field of rational protein design face a significant challenge, which arises from the two defining and inter-related features of typical globular protein structures, namely topological complexity and cooperativity. In striking contrast to globular proteins, tandem repeat proteins, such as ankyrin, tetratricopeptide and leucine-rich repeats, have regular, modular, linearly arrayed structures which makes it especially straightforward to dissect and redesign their properties. Here we review what we have learnt about the biophysics of natural repeat proteins and recent progress in applying that knowledge to engineer the thermodynamics, folding pathways and molecular recognition properties of tandem repeat proteins, and we discuss the wealth of possibilities presented for the extension of this modular construction process to build new molecules for use in medicine and biotechnology.

Take home lessons from studies of related proteins

The 'Fold Approach' involves a detailed analysis of the folding of several topologically, structurally and/or evolutionarily related proteins. Such studies can reveal determinants of the folding mechanism beyond the gross topology, and can dissect the residues required for folding from those required for stability or function. While this approach has not yet matured to the point where we can predict the native conformation of any polypeptide chain in silico, it has been able to highlight, amongst others, the specific residues that are responsible for nucleation, pathway malleability, kinetic intermediates, chain knotting, internal friction and Paracelsus switches. Some of the most interesting discoveries have resulted from the attempt to explain differences between homologues.

Rearranging and concatenating a native RTX domain to understand sequence modularity

The use of repetitive peptide sequences forming predictable secondary structures has been a key paradigm in recent efforts to engineer biomolecular recognition. The modularity and predictability of these scaffolds enables precise identification and mutation of the active interface, providing a level of control which non-repetitive scaffolds often lack. However, the majority of these scaffolds are well-folded stable structures. If the structures had a stimulus-responsive character, this would enable the allosteric regulation of their function. The calcium-responsive beta roll-forming repeats in toxin (RTX) domain potentially offer both of these properties. To further develop this scaffold, we synthesized a set of RTX peptides ranging in size from 5 to 17 repeats, with and without C-terminal capping. We found that while the number of repeats can be altered to tune the size of the RTX face, repeat ordering and C-terminal capping are critical for successful folding. Comparing all of the constructs, we also observed that native configuration with nine repeats exhibited the highest affinity for calcium. In addition, we performed a comparison on a set of known RTX-containing proteins and find that C-terminal repeats often possess deviations from the consensus RTX sequence which may be essential for proper folding. We further find that there seems to be a narrow size range in which RTX domains exist. These results demonstrate that the deviations from the consensus RTX sequence that are observed in natural proteins are important for high-affinity calcium binding and folding. Therefore, the RTX scaffolds will be less modular as compared with other, non-responsive scaffolds, and the sequence-dependent interactions between different repeats will need to be retained in these scaffolds as they are developed in future protein-engineering efforts.

Structural basis of MET receptor dimerization by the bacterial invasion protein InlB and the HGF/SF splice variant NK1

The structural basis of ligand-induced dimerization of the receptor tyrosine kinase MET by its natural ligand hepatocyte growth factor/scatter factor (HGF/SF) is not well understood. However, interesting insight into the molecular mechanism of MET dimerization has emerged from crystal structures of MET in complex with a bacterial agonist, the invasion protein internalin B (InlB) from pathogenic Listeria monocytogenes. MET activation by InlB promotes uptake of bacteria into host cells. Structural and biophysical data suggest that InlB is monomeric on its own but dimerizes upon binding to the membrane-anchored MET receptor promoting the formation of a signaling active 2:2 complex. The dimerization interface is small and unusually located on the convex side of the curved InlB leucine-rich repeat (LRR) domain. As InlB does not dimerize in solution, the dimerization site could only be identified by studying packing contacts of InlB in various crystal forms and had to be proven by scrutinizing its biological relevance in cellular assays. InlB dimerization is thus an example of a low-affinity contact that appears irrelevant in solution but becomes physiologically significant in the context of 2-dimensional diffusion restricted to the membrane plane. The resulting 2:2 InlB:MET complex has an InlB dimer at its center with one MET molecule bound peripherally to each InlB. This model of ligand-mediated MET dimerization may serve as a blue-print to understand MET activation by NK1, a naturally occurring HGF/SF splice variant and MET agonist. Crystal structures of NK1 repeatedly show a NK1 dimer, in which residues implicated in MET-binding are located on the outside. Thus, MET dimerization by NK1 may also be ligand-mediated with a NK1 dimer at the center of the 2:2 complex with one MET molecule bound peripherally to each NK1. This article is part of a Special Issue entitled: Emerging recognition and activation mechanisms of receptor tyrosine kinases.

Engineered variants of InlB with an additional leucine-rich repeat discriminate between physiologically relevant and packing contacts in crystal structures of the InlB:MET complex

The physiological relevance of contacts in crystal lattices often remains elusive. This was also the case for the complex between the invasion protein internalin B (InlB) from Listeria monocytogenes and its host cell receptor, the human receptor tyrosine kinase (RTK) MET. InlB is a MET agonist and induces bacterial host cell invasion. Activation of RTKs generally involves ligand-induced dimerization of the receptor ectodomain. The two currently available crystal structures of the InlB:MET complex show the same arrangement of InlB and MET in a 1:1 complex, but different dimeric 2:2 assemblies. Only one of these 2:2 assemblies is predicted to be stable by a computational procedure. This assembly is mainly stabilized by a contact between the Cap domain of InlB from one and the Sema domain of MET from another 1:1 complex. Here, we probe the physiological relevance of this interaction. We generated variants of the leucine-rich repeat (LRR) protein InlB by inserting an additional repeat between the first and the second LRR. This should allow formation of the 1:1 complex but disrupt the potential 2:2 complex involving the Cap-Sema contact due to steric distortions. A crystal structure of one of the engineered proteins showed that it folded properly. Binding affinity to MET was comparable to that of wild-type InlB. The InlB variant induced MET phosphorylation and cell scatter like wild-type InlB. These results suggest that the Cap-Sema interaction is not physiologically relevant and support the previously proposed assembly, in which a 2:2 InlB:MET complex is built around a ligand dimer.

Design of a binding scaffold based on variable lymphocyte receptors of jawless vertebrates by module engineering

Repeat proteins have recently been of great interest as potential alternatives to immunoglobulin antibodies due to their unique structural and biophysical features. We here present the development of a binding scaffold based on variable lymphocyte receptors, which are nonimmunoglobulin antibodies composed of Leucine-rich repeat modules in jawless vertebrates, by module engineering. A template scaffold was first constructed by joining consensus repeat modules between the N- and C-capping motifs of variable lymphocyte receptors. The N-terminal domain of the template scaffold was redesigned based on the internalin-B cap by analyzing the modular similarity between the respective repeat units using a computational approach. The newly designed scaffold, termed "Repebody," showed a high level of soluble expression in bacteria, displaying high thermodynamic and pH stabilities. Ease of molecular engineering was shown by designing repebodies specific for myeloid differentiation protein-2 and hen egg lysozyme, respectively, by a rational approach. The crystal structures of designed repebodies were determined to elucidate the structural features and interaction interfaces. We demonstrate general applicability of the scaffold by selecting repebodies with different binding affinities for interleukin-6 using phage display.

Monitoring the conformational changes of an intrinsically disordered peptide using a quartz crystal microbalance

Intrinsically disordered peptides (IDPs) have recently garnered much interest because of their role in biological processes such as molecular recognition and their ability to undergo stimulus-responsive conformational changes. The block V repeat-in-toxin motif of the Bordetella pertussis adenylate cyclase is an example of an IDP that undergoes a transition from a disordered state to an ordered beta roll conformation in the presence of calcium ions. In solution, a C-terminal capping domain is necessary for this transition to occur. To further explore the conformational behavior and folding requirements of this IDP, we have cysteine modified three previously characterized constructs, allowing for attachment to the gold surface of a quartz crystal microbalance (QCM). We demonstrate that, while immobilized, the C-terminally capped peptide exhibits similar calcium-binding properties to what have been observed in solution. In addition, immobilization on the solid surface appears to enable calcium-responsiveness in the uncapped peptides, in contrast to the behavior observed in solution. This work demonstrates the power of QCM as a tool to study the conformational changes of IDPs immobilized on surfaces and has implications for a range of potential applications where IDPs may be engineered and used including protein purification, biosensors, and other bionanotechnology applications.

Calcium-induced folding of a beta roll motif requires C-terminal entropic stabilization

Beta roll motifs are associated with several proteins secreted by the type 1 secretion system (T1SS). Located just upstream of the C-terminal T1SS secretion signal, they are believed to act as calcium-induced switches that prevent folding before secretion. Bordetella pertussis adenylate cyclase (CyaA) toxin has five blocks of beta roll motifs (or repeats-in-toxin motifs) separated by linkers. The block V motif on its own has been reported to be non-responsive to calcium. Only when the N- and C-terminal linkers, or flanking groups, were fused did the motif bind calcium and fold. In an effort to understand the requirements for beta roll folding, we have truncated the N- and C-terminal flanks at several locations to determine the minimal essential sequences. Calcium-responsive beta roll folding occurred even in the absence of the natural N-terminal flank. The natural C-terminal flank could not be truncated without decreased calcium affinity and only partially truncated before losing calcium-responsiveness. Globular protein fusion at the C-terminus likewise enabled calcium-induced folding but fusions solely at the N-terminus failed. This demonstrates that calcium-induced folding is an inherent property of the beta roll motif rather than the flanking groups. Given the disparate nature of the observed functional flanking groups, C-terminal fusions appear to confer calcium-responsiveness to the beta roll motif via a non-specific mechanism, suggesting that entropic stabilization of the unstructured C-terminus can enable beta roll folding. Increased calcium affinity was observed when the natural C-terminal flank was used to enable calcium-induced folding, pointing to its cooperative participation in beta roll formation. This work indicates that a general principle of C-terminal entropic stabilization can enable stimulus-responsive repeat protein folding, while the C-terminal flank has a specific role in tuning calcium-responsive beta roll formation. These observations are in stark contrast to what has been reported for other repeat proteins.

Intragenic suppression of a trafficking-defective brassinosteroid receptor mutant in Arabidopsis

The cell surface receptor kinase BRASSINOSTEROID-INSENSITIVE-1 (BRI1) is the major receptor for steroid hormones in Arabidopsis. Plants homozygous for loss-of-function mutations in BRI1 display a reduction in the size of vegetative organs, resulting in dwarfism. The recessive bri1-5 mutation produces receptors that do not accumulate to wild-type levels and are retained mainly in the endoplasmic reticulum. We have isolated a dominant suppressor of the dwarf phenotype of bri1-5 plants. We show that this suppression is caused by a second-site mutation in BRI1, bri1-5R1. The bri1-5R1 mutation partially rescues the phenotypes of bri1-5 in many tissues and enhances bri1-5 phenotypes above wild-type levels in several other tissues. We demonstrate that the phenotypes of bri1-5R1 plants are due to both increased cell expansion and increased cell division. To test the mechanism of bri1-5 suppression, we assessed whether the phenotypic suppression in bri1-5R1 was dependent on ligand availability and the integrity of the signaling pathway. Our results indicate that the suppression of the dwarf phenotypes associated with bri1-5R1 requires both BR biosynthesis and the receptor kinase BRI1-ASSOCIATED KINASE-1 (BAK1). Finally, we show that bri1-5R1 partially restores the accumulation and plasma membrane localization of BRI1. Collectively, our results point toward a model in which bri1-R1 compensates for the protein-folding abnormalities caused by bri1-5, restoring accumulation of the receptor and its delivery to the cell surface.

Slow formation of aggregation-resistant beta-sheet folding intermediates

Protein folding has been studied extensively for decades, yet our ability to predict how proteins reach their native state from a mechanistic perspective is still rudimentary at best, limiting our understanding of folding-related processes in vivo and our ability to manipulate proteins in vitro. Here, we investigate the in vitro refolding mechanism of a large beta-helix protein, pertactin, which has an extended, elongated shape. At 55 kDa, this single domain, all-beta-sheet protein allows detailed analysis of the formation of beta-sheet structure in larger proteins. Using a combination of fluorescence and far-UV circular dichroism spectroscopy, we show that the pertactin beta-helix refolds remarkably slowly, with multiexponential kinetics. Surprisingly, despite the slow refolding rates, large size, and beta-sheet-rich topology, pertactin refolding is reversible and not complicated by off-pathway aggregation. The slow pertactin refolding rate is not limited by proline isomerization, and 30% of secondary structure formation occurs within the rate-limiting step. Furthermore, site-specific labeling experiments indicate that the beta-helix refolds in a multistep but concerted process involving the entire protein, rather than via initial formation of the stable core substructure observed in equilibrium titrations. Hence pertactin provides a valuable system for studying the refolding properties of larger, beta-sheet-rich proteins, and raises intriguing questions regarding the prevention of aggregation during the prolonged population of partially folded, beta-sheet-rich refolding intermediates. Proteins 2010. (c) 2009 Wiley-Liss, Inc.

A FRET-based method for probing the conformational behavior of an intrinsically disordered repeat domain from Bordetella pertussis adenylate cyclase

A better understanding of the conformational changes exhibited by intrinsically disordered proteins is necessary as we continue to unravel their myriad biological functions. In repeats in toxin (RTX) domains, calcium binding triggers the natively unstructured domain to adopt a beta roll structure. Here we present an in vitro Forster resonance energy transfer (FRET)-based method for the investigation of the conformational behavior of an RTX domain from the Bordetella pertussis adenylate cyclase consisting of nine repeat units. Equilibrium and stopped-flow FRET between fluorescent proteins, attached to the termini of the domain, were measured in an analysis of the end-to-end distance changes in the RTX domain. The method was complemented with circular dichroism spectroscopy, tryptophan fluorescence, and bis-ANS dye binding. High ionic strength was observed to decrease the calcium affinity of the RTX domain. A truncation and single amino acid mutations yielded insights into the structural determinants of beta roll formation. Mutating the conserved Asp residue in one of the nine repeats significantly reduced the affinity of the domains for calcium ions. Removal of the sequences flanking the repeat domain prevented folding, but replacing them with fluorescent proteins restored the conformational behavior, suggesting an entropic stabilization. The FRET-based method is a useful technique that complements other low-resolution techniques for investigating the dynamic conformational behavior of the RTX domain and other intrinsically disordered protein domains.

Invivo folding efficiencies for mutants of the P22 tailspike beta-helix protein correlate with predicted stability changes

Parallel beta-helices are among the simplest repetitive structural elements in proteins. The folding behavior of beta-helix proteins has been studied intensively, also to gain insight on the formation of amyloid fibrils, which share the parallel beta-helix as a central structural motif. An important system for investigating beta-helix folding is the tailspike protein from the Salmonella bacteriophage P22. The central domain of this protein is a right-handed parallel beta-helix with 13 windings. Extensive mutational analyses of the P22 tailspike protein have revealed two main phenotypes: temperature-sensitive-folding (tsf) mutations that reduce the folding efficiency at elevated temperatures, and global suppressor (su) mutations that increase the tailspike folding efficiency. A central question is whether these phenotypes can be understood from changes in the protein stability induced by the mutations. Experimental determination of the protein stability is complicated by the nearly irreversible trimerization of the folded tailspike protein. Here, we present calculations of stability changes with the program FoldX, focusing on a recently published extensive data set of 145 singe-residue alanine mutants. We find that the calculated stability changes are correlated with the experimentally measured invivo folding efficiencies. In addition, we determine the free-energy landscape of the P22 tailspike protein in a nucleation-propagation model to explore the folding mechanism of this protein, and obtain a processive folding route on which the protein nucleates in the N-terminal region of the helix.

What have we learned from the studies of two-state folders, and what are the unanswered questions about two-state protein folding?

Small proteins with globular structures often fold by simple all-or-none mechanisms, both in an equilibrium and a kinetic sense, despite the very large number of partly folded conformations available. This type of 'two-state' folding will be discussed in terms of experimental tests, underlying molecular mechanisms, and limits to two-state behavior. Factors that appear to be important for two-state folding include topology (sequence distance of contacts in the native structure), molecular cooperativity and local energy distribution. Because their local stability distributions and cooperativities can be dissected and analyzed separately from topological features, recent studies of the folding of symmetric proteins will be discussed as a means to better understand the origins of two-state folding.

Thermodynamics, kinetics, and salt dependence of folding of YopM, a large leucine-rich repeat protein

Small globular proteins have many contacts between residues that are distant in primary sequence. These contacts create a complex network between sequence-distant segments of secondary structure, which may be expected to promote the cooperative folding of globular proteins. Although repeat proteins, which are composed of tandem modular units, lack sequence-distant contacts, several of considerable length have been shown to undergo cooperative two-state folding. To explore the limits of cooperativity in repeat proteins, we have studied the unfolding of YopM, a leucine-rich repeat (LRR) protein of over 400 residues. Despite its large size and modular architecture (15 repeats), YopM equilibrium unfolding is highly cooperative, and shows a very strong dependence on the concentration of urea. In contrast, kinetic studies of YopM folding indicate a mechanism that includes one or more transient intermediates. The urea dependence of the folding and unfolding rates suggests a relatively small transition state ensemble. As with the urea dependence, we have found an extreme dependence of the free energy of unfolding on the concentration of salt. This salt dependence likely results from general screening of a large number of unfavorable columbic interactions in the folded state, rather than from specific cation binding.