Extraction of Dracocephalum kotschyi Boiss using supercritical carbon dioxide: Experimental and optimization

Utilization of RESOLV with polymer to produce prazosin hydrochloride nanoparticles and optimization of the process parameters

In this study, rapid expansion of a supercritical solution into a Liquid Solvent (RESOLV) was used for the first time to produce pharmaceutical nanoparticles of Prazosin hydrochloride (PRH). The Taguchi method (robust design) was utilized to design the experiments and ensure obtaining the optimal process conditions. The pressure (15-25 MPa), temperature (308-328 K) and nozzle diameter (300-700 μm) effects on the morphology and size distribution of the resulting particles were also examined. The size of the particles decreased from about 40 μm to the range of (252-418 nm). FTIR, DLS, FESEM, XRD, DSC were used to characterize the primary and processed PRH particles. According to DSC investigations, RESOLV-produced PRH showed lower crystallinity than original PRH.

Determination of Regorafenib monohydrate (colorectal anticancer drug) solubility in supercritical CO2: Experimental and thermodynamic modeling

In this study, the solubilities of Regorafenib monohydrate (REG), a widely used as a colorectal anticancer drug, in supercritical carbon dioxide (ScCO2) were measured under various pressures and temperature conditions, for the first time. The minimum value of REG in mole fraction was determined to be 3.06×10-7, while the maximum value was found to be 6.44×10-6 at 338 K and 27 MPa. The experimental data for REG were correlated through the utilization of two types of models: (1) a set of 25 existing empirical and semi-empirical models that incorporated 3-8 parameters according to functional dependencies, (2) a model that relied on solid-liquid equilibrium (SLE) and the newly improved association models. All of the evaluated models were capable of generating suitable fits to the solubility data of REG, however, the average absolute relative deviation (AARD) of Gordillo et al. model (AARD=13.2%) and Reddy et al. model (AARD=13.5%) indicated their superiority based on AARD%. Furthermore, solvation and sublimation enthalpies of REG drug were estimated for the first time.

Ternary Metal (Cu-Ni-Zn) Oxide Nanocomposite via an Environmentally Friendly Route

In this work, we report the engineering of sub-30 nm nanocomposites of CuO/ZnO/NiO by using Dodonaea viscosa leaf extract. Zinc sulfate, nickel chloride, and copper sulfate were used as salt precursors, and isopropyl alcohol and water were used as solvents. The growth of nanocomposites was investigated by varying the concentrations of precursors and surfactants at pH 12. The as-prepared composites were characterized by XRD analysis and found to have CuO (monoclinic), ZnO (hexagonal primitive), and NiO (cubic) phases with an average size of 29 nm. FTIR analysis was performed to investigate the mode of fundamental bonding vibrations of the as-prepared nanocomposites. The vibrations of the prepared CuO/ZnO/NiO nanocomposite were detected at 760 and 628 cm^-1, respectively. The optical bandgap energy of the CuO/NiO/ZnO nanocomposite was 3.08 eV. Ultraviolet-visible spectroscopy was performed to calculate the band gap by the Tauc approach. Antimicrobial and antioxidant activities of the synthesized CuO/NiO/ZnO nanocomposite were investigated. It was found that the antimicrobial activity of the synthesized nanocomposite increases with an increase in the concentration. The antioxidant activity of the synthesized nanocomposite was examined by using both ABTS and DPPH assays. The obtained results show an IC₅₀ value of 0.110 for the synthesized nanocomposite compared to DPPH and ABTS (0.512), which is smaller than that of ascorbic acid (IC₅₀ = 1.047). Such a low IC₅₀ value ensures that the antioxidant potential of the nanocomposite is higher than that of ascorbic acid, which in turn shows their excellent antioxidant activity against both DPPH and ABTS.

Characterization of phyto-components with antimicrobial traits in supercritical carbon dioxide and soxhlet Prosopis juliflora leaves extract using GC-MS

This study aimed to screen the bioactive compounds from Prosopis juliflora leaf supercritical fluid extract and to assess its antimicrobial properties. Supercritical carbon dioxide and Soxhlet methods were used for extraction. The extract was subjected to Gas Chromatography-Mass Spectrometer (GC-MS) and Fourier Transform Infrared for the characterization of the phyto-components. When compared to soxhlet extraction, more components (35) were eluted by supercritical fluid extraction (SFE), according to GC-MS screening. Rhizoctonia bataticola, Alternaria alternata, and Colletotrichum gloeosporioides were all successfully inhibited by P. juliflora leaf SFE extract, which demonstrated strong antifungal properties with mycelium percent inhibition of 94.07%, 93.15%, and 92.43%, respectively, compared to extract from Soxhlet, which registered 55.31%, 75.63% and 45.13% mycelium inhibition respectively. Also, SFE P. juliflora extracts registered higher zone of inhibition 13.90 mm, 14.47 mm and 14.53 mm against all three test food-borne bacterial pathogens viz Escherichia coli, Salmonella enterica and Staphylococcus aureus respectively. Results obtained from GC-MS screening revealed that SFE is more efficient than soxhlet extraction in recovering the phyto-components. P. juliflora may provide antimicrobial agents, a novel natural inhibitory metabolite.

Effect of the Processing Conditions on the Supercritical Extraction and Impregnation of Rosemary Essential Oil in Linear Low-Density Polyethylene Films

The supercritical fluid extraction of essential oil from rosemary leaves and its subsequent impregnation in linear low-density polyethylene (LLDPE) films were studied. The effects of temperature (318 and 338 K), pressure (15 and 25 MPa) and rosemary particle size (0.9 and 0.15 mm) on the extraction yield were investigated. Impregnation assays were developed at two different values of pressure (12 and 20 MPa), temperature (308 and 328 K), and impregnation time (1 and 5 h). The extraction yield of rosemary essential oil was increased by increasing pressure and decreasing particle size and temperature. ANOVA results showed that temperature, pressure, and time significantly impacted the essential oil impregnation yield in LLDPE films. The maximum impregnation yield (1.87 wt. %) was obtained at 12 MPa, 328 K, and 5 h. The antioxidant activity and the physical-mechanical properties of impregnated films were analyzed. The IC50 values for all the impregnated LLDPE samples were close to the IC50 value of the extract showing that the impregnated films have a significant antioxidant activity.

Separation of hydrocarbons from activated carbon as a porous substance in a glycol regeneration process using supercritical carbon dioxide

Activated carbons are used in industrial applications; their cost is a major barrier to their more widespread application. Regeneration of activated carbons is indispensable to minimize operational costs and product wastage. Supercritical carbon dioxide (SC-CO₂) as green technology was used to regenerate activated carbons. In this work, response surface methodology was employed to optimize the supercritical regeneration process and to evaluate the effect of the operational parameters including pressure (100-300 bar), temperature (313-333 K), flow rate (2-6 g/min), and dynamic time (30-150 min) on the regeneration yield. The maximum regeneration yield (93.71%) was achieved at 285 bar, 333 K, 4 g/min, and 147 min. Mathematical modeling was done using two one-parameter kinetics models, which agree well with the experimental data. The fitting parameter of the model was obtained by using a differential evolution algorithm. The chemical composition of the substances extracted from the activated carbon was identified by gas chromatography. The results showed that the regeneration of activated carbon by SC-CO₂ can be an alternative method to conventional methods.

Supercritical Fluid Extraction from Zataria multiflora Boiss and Impregnation of Bioactive Compounds in PLA for the Development of Materials with Antibacterial Properties

In this research, the extraction with supercritical carbon dioxide (SC-CO2) and the subsequent impregnation of the extracted bioactive compounds from Zataria multiflora Boiss (Z. multiflora) into polylactic acid (PLA) films was investigated. The effects of temperature (318 and 338 K), pressure (15 and 25 MPa) and cosolvent presence (0 and 3 mol%) on the extraction yield were studied. The SC-CO2 assisted impregnation runs were carried out in a discontinuous mode at different pressure (15 and 25 MPa), temperature (318 and 328 K), and time (2 and 8 h) values, using 0.5 MPa min−1 as a constant value of depressurization rate. ANOVA results confirmed that pressure, temperature, and time influenced the extraction yield. Moreover, antioxidant activities of extracts of Z. multiflora were evaluated using 2,2-diphenyl-1-picrylhydrazyl (DPPH) radical scavenging assays. In addition, the antibacterial activities of the extracts were screened against standard strains of Staphylococcus aureus (S. aureus) and Escherichia coli (E. coli). The results of this investigation indicated that extracts obtained from the aerial parts of Z. multiflora possessed antioxidant and antibacterial properties. The impregnated samples presented strong antibacterial activity against the selected microorganisms.

Hydro-Distilled and Supercritical Fluid Extraction of Eucalyptus camaldulensis Essential Oil: Characterization of Bioactives Along With Antioxidant, Antimicrobial and Antibiofilm Activities

Present research work evaluates variation in volatile chemicals profile and biological activities of essential oil (EO) obtained from the leaves of eucalyptus (Eucalyptus camaldulensis Dehnh.) using hydro-distillation (HD) and supercritical fluid extraction (SFE). The yield (1.32%) of volatile oil by HD was higher than the yield (.52%) of the SFE method (P < .05). The results of physical factors like density, color, refractive index, and solubility of the EOs produced by both the methods showed insignificant variations. Gas chromatography - mass spectrometry (GC-MS) compositional analysis showed that eucalyptol (31.10% and 30.43%) and α-pinene (11.02% and 10.35%) were the main constituents detected in SFE and HD extracted Eucalyptus camaldulensis EO, respectively. Antioxidant activity-related parameters, such as reducing ability and DPPH free radical scavenging capability exhibited by EO obtained via SFE were noted to be better than hydro-distilled EO. Supercritical fluid extracted and hydro-distilled essential oils demonstrated a considerable but variable antimicrobial potential against selected bacterial and fungal strains. Interestingly, oil extracted by SFE showed relatively higher hemolytic activity and biofilm inhibition potential. The variation in biological activities of tested EOs can be linked to the difference in the volatile bioactives composition due to different isolation techniques. In conclusion, the EO obtained from Eucalyptus leaves by the SFE method can be explored as a potential antioxidant and antimicrobial agent in the functional food and nutra-pharmaceutical sector.

Process Optimization for Supercritical Carbon Dioxide Extraction of Origanum vulgare L. Essential Oil Based on the Yield, Carvacrol, and Thymol Contents

Background

Origanum vulgare L. essential oil (OEO) is widely known for its good biological activity, but different extraction methods with significant implications on the yield of OEO and the content of the thymol and carvacrol. As an efficient method for extracting essential oils (EO), the supercritical carbon dioxide extraction (SC-CO2) can improve the yield of EOs while protecting their main active components from loss.

Objective

In this study, the process optimization of SC-CO2 of OEO was carried out. The effects of extraction pressure, temperature, time, and modifier concentration on the composite score of OEO extraction process were investigated.

Method

Response surface analysis was performed using a Box-Behnken design with three levels and four independent variables. Steam distillation (SD) and lipophilic solvents (n-hexane) extraction (LSE) were compared with SC-CO2 for OEO yields. OEOs extracted by the three methods were qualitatively and semi-quantitatively analyzed by gas chromatography quadrupole-time-of-flight mass spectrometry and gas chromatography-flame ionization detector.

Results

The results showed that extraction pressure was the most significant factor affecting the OEO yield, thymol, and carvacrol content. In the optimal conditions (pressure: 217 bar, temperature: 54°C, time: 2 h, modifier concentration: 14%), the yield of OEO reached up to 1.136%, and the contents of thymol and carvacrol reached 53.172  and 41.785 mg/g, respectively.

Conclusions

SC-CO2 was the best extraction method compared to the other two methods. Under the optimal conditions, yield and the content of main components can be effectively improved. It can provide a theoretical basis for the industrial extraction of OEO.

Highlights

Taking the comprehensive score as the index, the interaction between the four independent variables in the supercritical fluid extraction process was evaluated by the response surface method. The effects of extraction parameters on the yield of EOs and the contents of thymol and carvacrol were comprehensively investigated.

Supercritical carbon dioxide extraction of plant phytochemicals for biological and environmental applications - A review

Recently, supercritical fluid CO₂ extraction (SFE) has emerged as a promising and pervasive technology over conventional extraction techniques for various applications, especially for bioactive compounds extraction and environmental pollutants removal. In this context, temperature and pressure regulate the solvent density and thereby effects the yield, selectivity, and biological/therapeutic properties of the extracted components. However, the nature of plant matrices primarily determines the extraction mechanism based on either density or vapor pressure. The present review aims to cover the recent research and developments of SFE technique in the extraction of bioactive plant phytochemicals with high antioxidant, antibacterial, antimalarial, and anti-inflammatory activities, influencing parameters, process conditions, the investigations for improving the yield and selectivity. In another portion of this review focuses on the ecotoxicology and toxic metal recovery applications. Nonpolar properties of Sc-CO₂ create strong solvent strength via distinct intermolecular interaction forces with micro-pollutants and toxic metal complexes. This results in efficient removal of these contaminants and makes SFE technology as a superior alternative for conventional solvent-based treatment methods. Moreover, a compelling assessment on the therapeutic, functional, and solvent properties of SFE is rarely focused, and hence this review would add significant value to the SFE based research studies. Furthermore, we mention the limitations and potential of future perspectives related to SFE applications.

Comparison and optimization of conventional and ultrasound-assisted solvent extraction for synthetization of lemongrass (Cymbopogon)-infused cooking oil

The lemongrass plant, which is widely cultivated in Asia, Australia, and Africa, has been reported to have many significant health benefits such as antimicrobial, insecticide, anticancer, fight fever, and disinfection. Therefore, it is an added benefit to have lemongrass compounds in cooking oil. This study was aimed to compare the conventional (CSE), and ultrasound-assisted solvent extraction (UASE) for citral compounds from lemongrass (Cymbopogon) leaves and to optimize the best extraction method using the response surface methodology (RSM) and ANOVA. RSM design of experiments using three types of cooking oils; palm oil, sunflower oil, and corn oil. The effect of three independent variables, which are temperature (48.2-81.8°C), extraction time (4.8-55.2 min), and solvent to leaves ratio (5.3-18.7), was investigated. The characterization of lemongrass-infused cooking oil was evaluated by Fourier transform infrared spectroscopy (FT-IR), Gas Chromatography-Mass Spectrometry (GC-MS) and Scanning Electron Microscopy (SEM) analysis for confirmation of the citral compound extraction. This extraction process is optimized using Response Surface Methodology (RSM) for producing the lemongrass-infused cooking oil. After optimization, the UASE process gives 1.009 × 106 maximum citral area for palm oil and 1.767 × 106 maximum citral area for sunflower oil. CSE process only can give 2.025 × 105 and 2.179 × 105 citral area in the GC-MS spectrum for palm oil and sunflower oil respectively. For both the UASE and the CSE, the optimum operating conditions are 81.8°C of extraction temperature and 55.2 min of extraction time except for lemongrass-infused palm oil in the CSE process with 45 min extraction time. The optimum solvent to leaves ratio varies from 5.3:1 to 12.9:1. This study found that corn oil cannot be used as a solvent to extract lemongrass-infused cooking oil due to the insignificant changes and no citral peak. The lemongrass (Cymbopogon)-infused palm oil and sunflower oil extracted using the UASE have a higher maximum citral area than the CSE process.

Extraction of essential oil from Dracocephalum kotschyi Boiss. (Lamiaceae), identification of two active compounds and evaluation of the antimicrobial properties

ETHNOPHARMACOLOGICAL RELEVANCE

Dracocephalum kotschyi is a medicinal plant widely used in traditional medicine to treat pain, fever, inflammation, and seizures.

AIM OF THE STUDY

Due to the importance of this plant and the well-known antibacterial activity of essential oils, the aim of the present study was to investigate the composition of essential oil and evaluate the antimicrobial activity of its main active compounds.

MATERIALS AND METHODS

In order to test its possible application at industrial level the oil was extract from the cultivated and wild plants. The epigean parts were collected in June 2018 from the same region of Daran (Isfahan, Iran). The extraction of essential oil was carried out using a Clevenger apparatus. The composition of the essential oil was assayed by using a gas chromatography/mass spectroscopy apparatus (GC/MS).

RESULTS

Results showed that the predominant compounds of essential oil of cultivated plants were α-pinene (13.66%), (E)-citral (12.89%), neral (11.25%), methyl geranate (8.66%), limonene (8.33%), campholenal (6.22%) and geraniol (5.69%), while those found in naturally grown plants were two main compounds: cyclohexylallene (52.63%) and limonene (35.88%). The antimicrobial properties of the plant were determined against 12 strains of microorganism by evaluating inhibition halo, minimum inhibitory concentration (MIC) and minimum bactericidal concentration (MBC). The highest inhibition halo for both oils from cultivated and wild plants was obtained against Aspergillus brasiliensis. The MIC value against Gram-positive Bacillus subtilis was 31.25 μg/ml, it was the lowest value provided by the essential oil obtained from the cultivated sample, the MIC was significantly lower than that obtained by treating the same strain with Rifampin. On the other hand, Candida albicans had the highest sensitivity (MIC value of 31.25 μg/ml) for the essential oil obtained from wild plants as the inhibitory concentration was lower than that obtained treating the yeast with Nystatin.

CONCLUSIONS

Therefore, according to the results of the present study, the use of the essential oil obtained from D. kotschyi can be used to protect food and to treat microbial infections.

Microwave-assisted extraction, characterization and immunomodulatory activity on RAW264.7 cells of polysaccharides from Trichosanthes kirilowii Maxim seeds

Microwave-assisted extraction of polysaccharides from Trichosanthes kirilowii Maxim seeds (TKMSP) was optimized using Response surface methodology (RSM) base on Central composite design (CCD). The optimum extraction conditions are detailed as follows: liquid-solid ratio 42 mL/g, extraction temperature 80 °C, microwave power 570 W, extraction time 26 min. Under this conditions, the mean value of TKMSP yield 2.43 ± 0.45% (n = 3), which was consistent closely with the predicted value (2.44%). The five polysaccharides (TKMSP-1, TKMSP-2, TKMSP-3, TKMSP-4 and TKMSP-5) were isolated from TKMSP by DEAE-52. TKMSP-1, TKMSP-2 and TKMSP-4 were common in containing Man, Rib, Rha, GluA, GalA, Glu, Gal, Xyl, Arab and Fuc. However, there was no Fuc in TKMSP-3, while TKMSP-5 lacked GluA, GalA and Fuc. UV–vis and FT-IR analysis combined with molecular weight determination further indicated that the five fractions were polydisperse polysaccharides. A significant difference was achieved in the structural characterization of these five fractions. TKMSP exhibited immunosuppressive activity on RAW264.7 cells. It can be applied as a potential immunosuppressant agent in medicine.

•

Microwave-assisted extraction of TKMSP optimized by RSM base on CCD.

•

The five polydisperse polysaccharides were isolated from TKMSP.

•

The structure characterizations of the five polysaccharides were analyzed.

•

TKMSP-3 exhibited significant inhibition of RAW264.7 proliferation.

The effect of pressure on the characteristics of supercritical carbon dioxide extracts from Calamintha nepeta subsp. nepeta

Chemists and industrialists are continuously attempting to develop greener and more environmentally benign chemical processes to extract essential oils and bioactive metabolites of high purity, finding various applications in cosmetics, detergents, nutraceuticals and pharmaceuticals. An increase preferenced for natural products over synthetic ones has made supercritical fluid technology a primary alternative for the generation of high-value bioactive ingredients. This effective technique requires only moderate temperatures, eliminates clean-up steps and avoids the use of harmful organic solvents. In this context, our study was focused on the chemical analysis of Calamintha nepeta subsp. nepeta aromatic extracts obtained with supercritical carbon dioxide. The effect of different operating conditions on the capacity of the lipophilic solvent to extract the targeted volatile components was also studied. The process was carried out at a fairly low constant temperature of 40°C, and with varying the pressure from 90 to 300 bar. The chemical composition of the extracts was analyzed by gas chromatography-mass spectroscopy. The results showed that the composition pattern, the concentrations of individual components and the quality of the extractable analytes were affected by pressure increase. The extraction yields varied from 0.73 to 1.21 wt% at 90 and 300 bar, respectively.

Mathematical modelling for extraction of oil from Dracocephalum kotschyi seeds in supercritical carbon dioxide

Extraction of oil from Dracocephalum kotschyi Boiss seeds using supercritical carbon dioxide was designed using central composite design to evaluate the effect of various operating parameters including pressure, temperature, particle size and extraction time on the oil yield. Maximum extraction yield predicted from response surface method was 71.53% under the process conditions with pressure of 220 bar, temperature of 35 °C, particle diameter of 0.61 mm and extraction time of 130 min. Furthermore, broken and intact cells model was utilised to consider mass transfer kinetics of extracted natural materials. The results revealed that the model had a good agreement with the experimental data. The oil samples obtained via supercritical and solvent extraction methods were analysed by gas chromatography. The most abundant acid was linolenic acid. The results analysis showed that there was no significant difference between the fatty acid contents of the oils obtained by the supercritical and solvent extraction techniques.