Supercritical carbon dioxide anti-solvent crystallization of fucoxanthin chromatographically purified from Hincksia mitchellae P.C. Silva

Emerging Technologies to Extract Fucoxanthin from Undaria pinnatifida: Microwave vs. Ultrasound Assisted Extractions

Macroalgae are an extensive resource for the obtention of bioactive compounds, mainly phenolic compounds, phlorotannins, and pigments. Fucoxanthin (Fx) is the most abundant pigment present in brown algae and has shown several useful bioactivities that can be used to fortify products in the food and cosmetic industries. Nevertheless, to date, there is still insufficient literature reporting on the extraction yield of Fx from U. pinnatifida species from green technologies. In this regard, the present study aims to optimize the extraction conditions to obtain the highest Fx yield from U. pinnatifida through emerging techniques, namely microwave-assisted extraction (MAE) and ultrasound-assisted extraction (UAE). These methods will be compared with the conventional methodologies of heat-assisted extraction (HAE) and Soxhlet-assisted extraction (SAE). According to our results, even though the extraction yield could be slightly higher when using MAE than UAE, the Fx concentration obtained from the alga was double when using UAE. Thus, the Fx ratio in the final extract reached values of 124.39 mg Fx/g E. However, the optimal conditions should also be considered since UAE needed 30 min to perform the extraction, whereas MAE was able to obtain 58.83 mg Fx/g E in only 3 min and 2 bar, meaning less energy expenditure and minimum cost function. To our knowledge, this study obtains the highest concentrations of Fx ever reported (58.83 mg Fx/g E for MAE and 124.39 mg Fx/g E for UAE), with low energy consumption and short times (3.00 min for MAE and 35.16 min for UAE). Any of these results could be selected for further experiments and proposed for industrial scaling-up.

Brown Algae as Functional Food Source of Fucoxanthin: A Review

Fucoxanthin is an algae-specific xanthophyll of aquatic carotenoid. It is prevalent in brown seaweed because it functions as a light-harvesting complex for algal photosynthesis and photoprotection. Its exceptional chemical structure exhibits numerous biological activities that benefit human health. Due to these valuable properties, fucoxanthin's potential as a potent source for functional food, feed, and medicine is being explored extensively today. This article has thoroughly reviewed the availability and biosynthesis of fucoxanthin in the brown seaweed, as well as the mechanism behind it. We included the literature findings concerning the beneficial bioactivities of fucoxanthin such as antioxidant, anti-inflammatory, anti-obesity, antidiabetic, anticancer, and other potential activities. Last, an additional view on its potential as a functional food ingredient has been discussed to facilitate a broader application of fucoxanthin as a promising bioactive compound.

Fucoxanthin from Algae to Human, an Extraordinary Bioresource: Insights and Advances in up and Downstream Processes

Fucoxanthin is a brown-colored pigment from algae, with great potential as a bioactive molecule due to its numerous properties. This review aims to present current knowledge on this high added-value pigment. An accurate analysis of the biological function of fucoxanthin explains its wide photon absorption capacities in golden-brown algae. The specific chemical structure of this pigment also leads to many functional activities in human health. They are outlined in this work and are supported by the latest studies in the literature. The scientific and industrial interest in fucoxanthin is correlated with great improvements in the development of algae cultures and downstream processes. The best fucoxanthin producing algae and their associated culture parameters are described. The light intensity is a major influencing factor, as it has to enable both a high biomass growth and a high fucoxanthin content. This review also insists on the most eco-friendly and innovative extraction methods and their perspective within the next years. The use of bio-based solvents, aqueous two-phase systems and the centrifugal partition chromatography are the most promising processes. The analysis of the global market and multiple applications of fucoxanthin revealed that Asian companies are major actors in the market with macroalgae. In addition, fucoxanthin from microalgae are currently produced in Israel and France, and are mostly authorized in the USA.

A review on the progress, challenges and prospects in commercializing microalgal fucoxanthin

Fucoxanthin, the most abundant but nearly untapped carotenoid resource, is in the spotlight in the last decade from various perspectives due to a wide range of bioactivities and healthy benefits. The exploitation of fucoxanthin for nutraceutical and pharmaceutical purposes encompasses enormous scientific and economic potentials. Traditional production of fucoxanthin from brown algae (macroalgae) is constrained by limited yield and prohibitively high cost. Microalgae, as the most diverse photoautotrophs, hold the promises as sustainable sources and ideal cell factories for commercial fucoxanthin production, owing to their rich fucoxanthin content and excellent biomass productivity. In this work, the recent progress in upstream (microalgae selection, optimization of culture conditions, trophic modes, cultivation strategies and biosynthesis pathway) as well as downstream processes (extraction) of fucoxanthin production has been comprehensively and critically reviewed. The major bottlenecks, such as screening of fucoxanthin-producers, conflict between biomass and fucoxanthin accumulation under high light condition, unclear steps in biosynthesis pathway and limited evaluation of outdoor scale-up cultivation and extraction, have been pinpointed. Most importantly, the applications of emerging and conventional techniques facilitating commercialization of microalgal fucoxanthin are highlighted. The reviewed and evaluated include breeding and high-throughput screening methods of elite strains; flashing light effect inducing concurrent biomass and fucoxanthin accumulation; fucoxanthin biosynthesis and the regulatory mechanisms associating with its accumulation elucidated with the development of genetic engineering and omics techniques; and photobioreactors, harvesting and extraction techniques suitable for scaling up fucoxanthin production. In conclusion, the prospects of microalgal fucoxanthin commercialization can be expected with the joint development of fundamental phycology and biotechnology.

Preparation of Liposomes from Soy Lecithin Using Liquefied Dimethyl Ether

We investigated a method to prepare liposomes; soy lecithin was dissolved in liquefied dimethyl ether (DME) at 0.56 MPa, which was then injected into warm water. Liposomes can be successfully prepared at warm water temperatures above 45 °C. The transmission electron microscopy (TEM) images of the obtained liposomes, size distribution, ζ-potential measurements by dynamic light scattering and the amount of residual medium were compared by gas chromatography using the conventional medium, diethyl ether. The size of the obtained liposomes was approximately 60-300 nm and the ζ-potential was approximately -57 mV, which was almost the same as that of the conventional medium. Additionally, for the conventional media, a large amount remained in the liposome dispersion even after removal by depressurization and dialysis membrane treatment; however, liquefied DME, owing to its considerably low boiling point, was completely removed by depressurization. Liquefied DME is a very attractive medium for the preparation of liposomes because it does not have the toxicity and residue problems of conventional solvents or the hazards of ethanol addition and high pressure of supercritical carbon dioxide; it is also environmentally friendly.

Scientific Approaches on Extraction, Purification and Stability for the Commercialization of Fucoxanthin Recovered from Brown Algae

The scientific community has corroborated the numerous beneficial activities of fucoxanthin, such as its antioxidant, anti-inflammatory, anticancer or neuroprotective effects, among others. These properties have attracted the attention of nutraceutical, cosmetic and pharmacological industries, giving rise to various possible applications. Fucoxanthin may be chemically produced, but the extraction from natural sources is considered more cost-effective, efficient and eco-friendly. Thus, identifying suitable sources of this compound and giving a general overview of efficient extraction, quantification, purification and stabilization studies is of great importance for the future production and commercialization of fucoxanthin. The scientific research showed that most of the studies are performed using conventional techniques, but non-conventional techniques begin to gain popularity in the recovery of this compound. High Performance Liquid Chromatography (HPLC), Nuclear Magnetic Resonance (NMR) and spectroscopy techniques have been employed in the quantification and identification of fucoxanthin. The further purification of extracts has been mainly accomplished using purification columns. Finally, the stability of fucoxanthin has been assessed as a free molecule, in an emulsion, or encapsulated to identify the variables that might affect its further industrial application.

Purification of Polybutylene Terephthalate by Oligomer Removal Using a Compressed CO2 Antisolvent

In this study, the cyclic oligomers in the highly chemically resistant polyester polybutylene terephthalate (PBT) were effectively removed using a compressed CO₂ antisolvent technique in which 1,1,1,3,3,3-hexafluoro-2-propanol (HFIP) was used as the solvent. In addition to the oligomers, tetrahydrofuran was completely removed because of its low molecular weight and liquid state. The effects of the operating variables, including temperature, pressure, and the PBT concentration in HFIP, on the degree of removal of the oligomers were systematically studied using experimental design and the response surface methodology. The most appropriate operating conditions for the purification of PBT were 8.3 MPa and 23.4 °C when using 4.5 wt % PBT in HFIP. Under these conditions, the cyclic trimers and dimers could be removed by up to 81.4% and 95.7%, respectively, in a very short operating time.