Chemicals and value added compounds from biomass using sub- and supercritical water

Efficient Mineralization of Lithium Bis(pentafluoroethanesulfonyl)imide and Related Electrolyte Fluorochemicals Using Superheated Water

Lithium bis(pentafluoroethanesulfonyl)imide, Li[N(SO2C2F5)2], a typical fluorochemical aimed at better electrochemical performance of battery electrolytes, in superheated water was studied for its waste treatment. When Li[N(SO2C2F5)2] was reacted in pure superheated water at 300 °C, little F- ions were produced. In contrast, complete mineralization of the fluorine, sulfur, and nitrogen atoms in Li[N(SO2C2F5)2] was achieved when the reaction was performed in the presence of KMnO4. Specifically, when Li[N(SO2C2F5)2] was treated for 18 h with 158 mM of KMnO4, the F- and SO42- yields were 101 and 99%, respectively, and the sum of the NO3- and NO2- yields was 101%. In the gas phase, trace CO2 was detected and no CHF3, which has high global warming potential, was formed. Furthermore, the fluorine, sulfur, and nitrogen atoms in the analogues K[N(SO2C4F9)2] and K[N(SO2CF2)2CF2] also underwent complete mineralization using the same approach.

Efficient Mineralization of Fluoroelastomers Using Superheated Water in the Presence of Potassium Hydroxide

The mineralization of fluoroelastomers (FKMs) in superheated water in the presence of potassium hydroxide (KOH) was investigated with the aim of developing a methodology for recycling the fluorine element. Two FKMs-an "uncrosslinked FKM", representing a poly(vinylidene fluoride-co-hexafluoropropylene) (poly(VDF-co-HFP)) copolymer with a VDF/HFP molar ratio of 78/22 and a "crosslinked FKM" consisting of this copolymer (cured by peroxide) and carbon black-were treated. The fluorine content of these FKMs was efficiently transformed into F- ions in the reaction solution using low KOH concentrations (0.10-0.50 M) at 200-250 °C. When the uncrosslinked or crosslinked FKMs reacted with aqueous KOH (0.20 M) at a rather low temperature (200 °C) for 18 h, the fluorine content of these FKMs was completely mineralized (both F- yields were 100%). Although the crosslinked FKM contained carbon black, the fluorine mineralization of the FKM was not inhibited. The addition of Ca(OH)2 to the reaction solutions after the superheated water treatment at 250 °C for 6 h with aqueous KOH (0.50 M) led to the production of pure CaF2, identified using X-ray spectroscopy, with 100% and 93% yields for the uncrosslinked and crosslinked FKMs, respectively.

Microbial assemblage for solid waste bioremediation and valorization with an essence of bioengineering

Environmental solid waste bioremediation is a method of treating contaminated solid waste that involves changing ecological conditions to foster the growth of a broad spectrum of microorganisms and the destruction of the target contaminants. A wide range of microorganisms creates metabolites that may break down and change solid waste-based pollution to various value-added molecules. Diverse bioremediation technologies, their limitations, and the procedure involve recycling solid waste materials from the environment. The existing environmental solid waste disposal services are insufficient and must be upgraded with more lucrative recovery, recycling, and reuse technologies to decrease the enormous expenditures in treatment procedures. Bioremediation of solid waste eliminates the toxic components. It restores the site with the advent of potential microbial communities towards solid waste valorization utilizing agriculture solid waste, organic food waste, plastic solid waste, and multiple industrial solid wastes.Bioengineering on diverse ranges of microbial regimes has accelerated to provide extra momentum toward solid waste recycling and valorization. This approach increases the activity of bioremediating microbes in the commercial development of waste treatment techniques and increases the cost-effective valuable product generation. This framework facilitates collaboration between solid waste and utilities. It can aid in establishing a long-term management strategy for recycling development with the advent of a broad spectrum of potential microbial assemblages, increasing solid waste contamination tolerance efficiency and solid waste degradability. The current literature survey extensively summarises solid waste remediation valorization using a broad spectrum of microbial assemblages with special emphasis on bioengineering-based acceleration. This approach is to attain sustainable environmental management and value-added biomolecule generation.

Valorization of sugar beet pulp to value-added products: A review

The processing of sugar beet in the sugar production industry releases huge amounts of sugar beet pulp as waste which can be considered a valuable by-product as a source of cellulose, hemicellulose, and pectin. Valorization of sugar beet pulp into value added products occurs through acid hydrolysis, hydrothermal techniques, and enzymatic hydrolysis. Biochemical conversion of beet pulp into simple fermentable sugars for producing value added products occurs through enzymatic hydrolysis is a cost effective and eco-friendly process. While beet pulp has predominantly been used as a fodder for livestock, recent developments in its biotechnological valorization have unlocked its value as a feedstock in the production of biofuels, biohydrogen, biodegradable plastics, and platform chemicals such as lactic acid, citric acid, alcohols, microbial enzymes, single cell proteins, and pectic oligosaccharides. This review brings forward recent biotechnological developments made in the valorization of sugar beet pulp into valuable products.

Kinetics Study of Hydrothermal Degradation of PET Waste into Useful Products

Kinetics of hydrothermal degradation of colorless polyethylene terephthalate (PET) waste was studied at two temperatures (300 °C and 350 °C) and reaction times from 1 to 240 min. PET waste was decomposed in subcritical water (SubCW) by hydrolysis to terephthalic acid (TPA) and ethylene glycol (EG) as the main products. This was followed by further degradation of TPA to benzoic acid by decarboxylation and degradation of EG to acetaldehyde by a dehydration reaction. Furthermore, by-products such as isophthalic acid (IPA) and 1,4-dioxane were also detected in the reaction mixture. Taking into account these most represented products, a simplified kinetic model describing the degradation of PET has been developed, considering irreversible consecutive reactions that take place as parallel in reaction mixture. The reaction rate constants (k1–k6) for the individual reactions were calculated and it was observed that all reactions follow first-order kinetics.

Green and Efficient Processing of Wood with Supercritical CO2: A Review

Wood processing is a crucial step of wood utilization, but the adding of environmentally hazardous feedstocks and the use of unreasonable technology allow it to harm the environment and human health. Supercritical CO2 (scCO2) is a non-toxic, odorless, and safe solvent, which is widely used in studies and industrial production, but there is no review summarizing wood processing with scCO2. The unique structure and chemical properties of wood combined with scCO2 technology produce positive results. In this paper, wood processing with scCO2 is summarized, including wood impregnation, wood drying, wood thermochemical conversion, and wood extraction. The green and efficient characteristics of wood processing with scCO2 are explained in detail for researchers, engineers, and investors to provide a clean wood processing method. Further study is needed to reduce its energy consumption and commercialize it eventually.

Microbiological and Antioxidant Activity of Phenolic Compounds in Olive Leaf Extract

According to many reports, phenolic compounds isolated from olive leaves have very good biological activities, especially antimicrobial. Presently, the resistance of microorganisms to antibiotics is greater than ever. Therefore, there are numerous recent papers about alternative solutions for inhibiting their influence on human health. Olive leaf is studied as an important source of antimicrobials with low cost and used in medicine. Numerous publications on involving green technologies for isolation of active compounds from olive leaves have appeared over the past few decades. The present review reports on current knowledge of the most isolated phenolic compounds from olive leaf extract as well as methods for their isolation and characterization. This paper uses recent research findings with a wide range of study models to describe the antimicrobial potential of phenolic compounds. It also describes the vast range of information about methods for determination of antimicrobial potential focusing on effects on different microbes. Additionally, it serves to highlight the role of olive leaf extract as an antioxidants and presents methods for determination of antioxidant potential. Furthermore, it provides an overview of presence of enzymes. The significance of olive leaves as industrial and agricultural waste is emphasized by means of explaining their availability, therapeutic and nutritional effects, and research conducted on this field.

Hydrothermal Treatment of Vegetable Oils and Fats Aiming at Yielding Hydrocarbons: A Review

According to the International Air Transport Agency (IATA), the aviation industry causes 2% of GHG emissions. As a result, goals such as improving aircraft efficiency by 1.5% per year and achieving carbon-neutral growth by 2020 were established. In this circumstance, fuels produced from biomass seem to be a promising route. There are many routes available to convert biomass into renewable fuels such as pyrolysis, hydroprocessing, transesterification, hydrothermal processes, and steam reforming. In this study, one reports a review of hydrothermal technologies. This review reports recent information about hydrothermal processes using water in sub- and supercritical states. This article introduces some concepts of the hydrothermal processes, advantages, and different types of feedstock adopted. The parameters which have an influence on hydrothermal processes such as temperature, pressure, particle size, catalyst, biomass/water ratio, and reaction time are illuminated. Water characteristics in sub- and supercritical conditions are discussed as a highly reactive medium to increase the affinity for the extraction of value-added compounds. Additionally, this review splits and details the reaction schemes that take place under hydrothermal conditions. Finally, it introduces recent research and development (R&D) trends in the hydrothermal process of fatty acids and triglycerides.

Green biorefinery - the ultra-high hydrolysis rate and behavior of Populus tomentosa hemicellulose autohydrolysis under moderate subcritical water conditions

A high monosaccharide conversion rate of hemicellulose in a green solvent and under moderate reaction conditions for industrialization is one of the most important keys in a lignocellulosic biorefinery. The behavior of Populus tomentosa hemicellulose polysaccharides, crystallinity and the furfural formation in the autohydrolysis process under moderate subcritical water conditions (160–180 °C, 0.618–1.002 MPa) were studied. The results have shown that the hemicellulose was converted to corresponding monosaccharides at an ultra-high hydrolysis rate. Factor analysis indicates that the temperature is the most important factor affecting hemicellulose autohydrolysis. When the autohydrolysis temperature increased from 160 to 180 °C for 2 h, the hydrolysis rate of xylose, rhamnose, galactose, mannose, and glucose from hemicellulose increased from 70% to 91%, 71% to 100%, 82% to 95%, 42% to 58%, and 34% to 37%, respectively. Arabinose was completely dissolved in 30 min. The xylose, rhamnose, galactose, and arabinose from hemicellulose could be almost completely removed under the conditions. The hemicellulose removal rate obtained herein exceeded the values reported for most acid, alkali, ionic liquid, or deep eutectic solvent treatments. It is notable that almost all glucose in hemicellulose was dissolved and the glucose in cellulose was partially hydrolyzed. An analysis of the sugar composition and the crystallinity change in the process at 180 °C demonstrate that hydrolysis reaction started to shift from amorphous regions to crystalline regions, due to the partial hydrolysis of crystalline cellulose after 90 min at 180 °C. Overall, these results show that the moderate subcritical water autohydrolysis of hemicellulose in Populus tomentosa may be a potential bio-refinery process.

A high monosaccharide conversion rate of hemicellulose in a green solvent and under moderate reaction conditions for industrialization is one of the most important keys in a lignocellulosic biorefinery.

Comparative Assessment of Phytochemical Profiles of Comfrey (Symphytum officinale L.) Root Extracts Obtained by Different Extraction Techniques

In this work a comparative study on phytochemical profiles of comfrey root extracts obtained by different extraction approaches has been carried out. Chemical profiles of extracts obtained by supercritical fluid (SFE), pressurized liquid (PLE), and conventional solid/liquid extraction were compared and discussed. Phytochemical composition was assessed by high-performance liquid chromatography coupled with electrospray time-of-flight mass spectrometry (HPLC-ESI-QTOF-MS/MS) identifying 39 compounds reported for the first time in comfrey root, mainly phenolic acids and fatty acids. The influence of different extraction parameters on phytochemical profiles of S. officinale root was investigated for all applied techniques. PLE and maceration, using alcohol-based solvents (aqueous methanol or ethanol), were shown to be more efficient in the recovery of more polar compounds. Greater numbers of phenolics were best extracted by PLE using 85% EtOH at 63 °C. The use of SFE and 100% acetone for 30 min enabled good recoveries of nonpolar compounds. SFE using 15% EtOH as a cosolvent at 150 bar produced the best recoveries of a significant number of fatty acids. The main compositional differences between extracts obtained by different extraction techniques were assigned to the solvent type. Hence, these results provided comprehensive approaches for treating comfrey root enriched in different phytochemicals, thereby enhancing its bioaccessibility.

Polysaccharides of mushroom Pleurotus spp.: New extraction techniques, biological activities and development of new technologies

The biodiversity of mushrooms Pleurotus spp. is impressive due to its complexity and diversity related to the composition of chemical structures such as polysaccharides, glycoproteins and secondary metabolites such as alkaloids, flavonoids and betalains. Recent studies of polysaccharides and their structural elucidation have helped to direct research and development of technologies related to pharmacological action, production of bioactive foods and application of new, more sophisticated extraction tools. The diversity of bioactivities related to these biopolymers, their mechanisms and routes of action are constant focus of researches. The elucidation of bioactivities has helped to formulate new vaccines and targeted drugs. In this context, in terms of polysaccharides and the diversity of mushrooms Pleurotus spp., this review seeks to revisit the genus, making an updated approach on the recent discoveries of polysaccharides, new extraction techniques and bioactivities, emphasising on their mechanisms and routes in order to update the reader on the recent technologies related to these polymers.

Some Advances in Supercritical Fluid Extraction for Fuels, Bio-Materials and Purification

Supercritical fluids are used for the extraction of desired ingredients from natural materials, but also for the removal of undesired and harmful ingredients. In this paper, the pertinent physical and chemical properties of supercritical water, methanol, ethanol, carbon dioxide, and their mixtures are provided. The methodologies used with supercritical fluid extraction are briefly dealt with. Advances in the application of supercritical extraction to fuels, the gaining of antioxidants and other useful items from biomass, the removal of undesired ingredients or contaminants, and the preparation of nanosized particles of drugs are described.

Pectin and Neutral Monosaccharides Production during the Simultaneous Hydrothermal Extraction of Waste Biomass from Refining of Sugar-Optimization with the Use of Doehlert Design

We propose a one-stage hydrothermal extraction of sugar beet pulp leading to effective co-production of pectin and neutral monosaccharides with a relatively high yield and satisfactory purity without the presence of an acidic catalyst. The optimal experimental design methodology was used for modelling and optimizing the yield of pectin and neutral monosaccharides. In good agreement with experimental results (R² = 0.955), the model predicts an optimal yield of pectin (approx. 121.1 g kg⁻¹ ± 0.47 g kg⁻¹) at a temperature and time of about 118.1 °C and 21.5 min, respectively. The highest yield of the sum of neutral monosaccharides (approx. 82.6 g kg⁻¹ ± 0.72 g kg⁻¹) was obtained at about 116.2 °C and 26.4 min (R² = 0.976). The obtained results are suitable for industrial upscaling and may provide an incentive to implement a new, environmentally friendly, simple, and effective method for treating waste product from the sugar refining industry, which has proved onerous until now.