Grafting of 2-Hydroxyethyl Methacrylate onto Polyacrylonitrile Using Supercritical Carbon Dioxide

Experimental Study for the Sorption and Diffusion of Supercritical Carbon Dioxide into Polyetherimide

Supercritical carbon dioxide (SCCO2) is a non-toxic and environmentally friendly fluid and has been used in polymerization reactions, processing, foaming, and plasticizing of polymers. Exploring the behavior and data of SCCO2 sorption and dissolution in polymers provides essential information for polymer applications. This study investigated the sorption and diffusion of SCCO2 into polyetherimide (PEI). The sorption and desorption processes of SCCO2 in PEI samples were measured in the temperature range from 40 to 60 °C, the pressure range from 20 to 40 MPa, and the sorption time from 0.25 to 52 h. This study used the ex situ gravimetric method under different operating conditions and applied the Fickian diffusion model to determine the mass diffusivity of SCCO2 during sorption and desorption processes into and out of PEI. The equilibrium mass gain fraction of SCCO2 into PEI was reported from 9.0 wt% (at 60 °C and 20 MPa) to 12.8 wt% (at 40 °C and 40 MPa). The sorption amount increased with the increasing SCCO2 pressure and decreased with the increasing SCCO2 temperature. This study showed the crossover phenomenon of equilibrium mass gain fraction isotherms with respect to SCCO2 density. Changes in the sorption mechanism in PEI were observed when the SCCO2 density was at approximately 840 kg/m3. This study qualitatively performed FTIR analysis during the SCCO2 desorption process. A CO2 antisymmetric stretching mode was observed near a wavenumber of 2340 cm-1. A comparison of loss modulus measurements of pure and SCCO2-treated PEI specimens showed the shifting of loss maxima. This result showed that the plasticization of PEI was achieved through the sorption process of SCCO2.

Facile Synthesis of Cyclic Polyamidine with High Cationic Degree Using Environmentally Benign Approach

An environmentally benign approach was developed to fabricate cyclic polyamidine via polymerization in supercritical carbon dioxide (SCCO2) and subsequently amidinization in water. Synthetic parameters were evaluated using response surface methodology. In comparison with aqueous solution polymerization for the fabrication of PNVF-co-PAN, polymerization using SCCO2 is favorable to promote the yield and viscosity of PNVF-co-PAN and diminished reaction time on account of excellent solvation capacity and transport property of SCCO2. Replacing the traditional water solution with SCCO2 as a green solvent could heighten the purity of PNVF-co-PAN by virtue of the excellent extraction of SCCO2. The cationic degree (5.66 mmol/g) of polyamidine fabricated by environmentally benign approach was significantly higher than that in previous reported studies.