Efficacy and safety of the use of titanium mesh cages and anterior cervical plates for interbody fusion after anterior cervical corpectomy

Physiologic Osseous Remodeling of the Anterior Wall of the Spinal Canal after Anterior Cervical Corpectomy and Fusion: A Retrospective Observational Study

BACKGROUND

 Anterior cervical corpectomy and fusion (ACCF) has been widely used in the treatment of cervical spondylotic myelopathy (CSM), ossification of posterior longitudinal ligament (OPLL), cervical trauma, and other cervical diseases, but few studies have reported the osseous and physiologic remodeling of the anterior wall of the spinal canal following ACCF. In this study, we analyze that remodeling process and its influence on titanium mesh cage (TMC) subsidence.

METHODS

 We performed a clinical and radiologic analysis of consecutive patients treated with ACCF. Growth rates (GRs) reflecting the extent of remodeling of the remnants of the resected vertebral bodies were measured. We compared the computed tomography (CT) scans taken immediately and at least 1 year after surgery, and a literature review was conducted.

RESULTS

 In all, 48 patients underwent ACCF at a mean age of 61.5 ± 12.0 years. The median follow-up was 36 months, and 159 CT images were analyzed. The GR values of the remnants of the vertebral bodies on CT images immediately and 1 year after surgery were 0.505 ± 0.077 and 0.650 ± 0.022 (p < 0.001), respectively, and the GR value at ≥4 years was 1. Axial CT scans showed that remodeling starts from the lateral remnants of the resected vertebral bodies, finally reaching the center. When fusion of the vertebral bodies and the titanium cage was complete during the first year after ACCF, osteogenesis and remodeling were initiated in the osseous anterior wall of the spinal canal. The remodeling of the osseous anterior wall of the spinal canal was completed at the fourth year after surgery, without recompressing the spinal cord, as seen on both axial and lateral CT scans. According to the literature review, there was no TMC subsidence at more than 4 years after surgery.

CONCLUSION

 The anterior wall of the spinal canal undergoes osseous remodeling after ACCF. The process is complete in the fourth year after surgery and prevents TMC subsidence.

A novel cervical vertebral bone quality score can independently predict cage subsidence after anterior cervical corpectomy and fusion

OBJECTIVES

To optimize cervical vertebral bone quality (C-VBQ) score and explore its effectiveness in predicting cage subsidence in Anterior Cervical Corpectomy and Fusion (ACCF) and identify a new method for evaluating subsidence without different equipment and image scale interference.

METHODS

Collecting demographic, imaging, and surgical related information. Measuring Cage Subsidence with a new method. Multifactorial logistic regression was used to identify risk factors associated with subsidence. Pearson's correlation was used to determine the relationship between C-VBQ and computed tomography (CT) Hounsfield units (HU). The receiver operating characteristic (ROC) curve was used to assess C-VBQ predictive ability. Correlations between demographics and C-VBQ scores were analyzed using linear regression models.

RESULTS

92 patients were included in this study, 36 (39.1%) showed subsidence with a C-VBQ value of 2.05 ± 0.45, in the no-subsidence group C-VBQ Value was 3.25 ± 0.76. The multifactorial logistic regression showed that C-VBQ is an independent predictor of cage subsidence with a predictive accuracy of 93.4%. Pearson's correlation analysis showed a negative correlation between C-VBQ and HU values. Linear regression analysis showed a positive correlation between C-VBQ and cage subsidence. Univariate analyses showed that only age was associated with C-VBQ.

CONCLUSIONS

The C-VBQ values obtained using the new measurements independently predicted postoperative cage subsidence after ACCF and showed a negative correlation with HU values. By adding the measurement of non-operated vertebral heights as a control standard, the results of cage subsidence measured by the ratio method are likely to be more robust, perhaps can exclude unavoidable errors caused by different equipment and proportional.

Cervical vertebral body replacement using a modern in situ expandable and angulable corpectomy cage system: early clinical and radiological outcome

PURPOSE

Vertebral body replacement (VBR) cages are commonly implanted to reconstruct the cervical vertebrae in cases of tumour, trauma, spondylodiscitis, and degeneration. Expandable cages have been widely used for this purpose; however, the lacking congruence at the implant-bone interface and consequent implant displacement were considered as a serious drawback of such systems. Aim of this study is to evaluate the early clinical and radiological outcome of a modern in situ not only expandable but also angulable cervical corpectomy cage system.

METHODS

A total of 42 patients who underwent a single or multilevel cervical VBR procedure were included and retrospectively evaluated in this single-centre case series. The neurological status was assessed using American Spinal Injury Association (ASIA) score. Complications were categorized into surgical (including implant-associated) and general medical. Radiographic parameters included regional angulation, segmental height, and coronal alignment.

RESULTS

Mean age was 59.5 ± 20.6 years. The recorded ASIA score improved postoperatively by 10 points (p  0.0001). Surgical including implant-associated complication rates were 19.05%. Radiographic evaluation showed a height gain of 11.2 mm (p < 0.0001), lordotic correction of 7° (p < 0.0001), and coronal alignment of 3° (p < 0.0001). At the last follow-up, loss of angulation correction of 1.9° (p  0.0002), subsidence of 1.92 mm (p  0.0006), and fusion rates of 68.42% were observed.

CONCLUSIONS

The use of an in situ angulable and expandable cage system in cervical VBR seems to offer better results compared to conventional static or expandable cages regarding segmental height gain, lordotic correction, and clinical improvement as well as low complication and revision rates. Significant height gain in multilevel surgeries is associated with higher rates of implant-associated complications.

Factors affecting titanium mesh cage subsidence in single-level anterior cervical corpectomy and fusion for ossification of the posterior longitudinal ligament

PURPOSE

To analyze risk factors of titanium mesh cage (TMC) subsidence in single-level anterior cervical corpectomy and fusion (ACCF) for cervical ossification of the posterior longitudinal ligament (OPLL).

METHODS

TMC subsidence is defined as the reduction of the adjacent vertebral bodies by ≥ 2 mm. Patients with cervical OPLL who were treated with single-level ACCF between January 2019 and May 2021 were retrospectively analyzed in two groups: patients with TMC subsidence as Group S and patients with no TMC subsidence as Group N during the one-year follow-up period. The degree of distraction of surgical segment and correction of the cervical curvature was measured to analyze their relationship with TMC subsidence.

RESULTS

A total of 128 patients were included in Group S, and 138 patients were included in Group N. There was no significant difference in patient demographics and complications between the two groups. The degree of distraction in Group S was significantly higher than that in Group N (11.4% ± 7.6% vs. 4.7% ± 9.7%, P < 0.01). The change of C2 to C7 Cobb angle (α) in Group S was significantly greater than that in Group N (5.7 ± 2.7 vs. 1.4 ± 4.7, P < 0.01), and the change of interspinous process distance (SPD) in Group S was also significantly greater than that in Group N (7.0 ± 4.2 vs. 4.1 ± 2.7, P < 0.01). The JOA score and JOA recovery rate were not statistically different between the two groups.

CONCLUSIONS

Intraoperative selection of overlength TMC in single-level ACCF for OPLL, over-distraction and excessive correction of the cervical curvature may cause TMC subsidence after surgery. No significant impact of TMC subsidence on the surgical outcome was observed during the 1-year follow-up period.

Low cervical vertebral CT value increased early subsidence of titanium mesh cage after anterior cervical corpectomy and fusion

Study design

This study was a retrospective review.

Objective

To study the predictive effect of Hounsfield units (HU) value in the cervical vertebral body derived from computed tomography (CT) on the early titanium mesh cage (TMC) subsidence after anterior cervical corpectomy and fusion (ACCF).

Methods

This retrospective study was conducted on patients who underwent ACCF at one institution between January 2014 and December 2018. We collected date included age, gender, body mass index (BMI), disease type, surgical segment, whether merge ACDF, HU value of the vertebral body and endplate, vertebral body height loss, cervical lordosis angle, and cervical sagittal alignment. VAS, JOA, and NDI were used to assess clinical efficacy. Univariate analysis was performed to screen the influencing factors of TMC subsidence, and then logistic regression was used to find out the independent risk factors. The ROC curve and area under curve (AUC) were used to analyze the HU value to predict the TMC subsidence.

Results

A total of 85 patients who accepted ACCF were included in this study, and early titanium mesh cage subsidence was demonstrated in 29 patients. The subsidence rate was 34.1%. The JOA, VAS, and NDI scores significantly improved in both groups after the operation. Between the subsidence and non-subsidence groups, there were significant differences in age, intervertebral distraction height, and HU value in both upper and lower vertebral body and endplate. The logistic regression analysis proved that the HU value of the lower vertebral body was an independent risk of TMC subsidence, the AUC was 0.866, and the most appropriate threshold of the HU value was 275 (sensitivity: 87.5%, specificity: 79.3%).

Conclusion

Preoperative cervical CT value is an independent correlative factor for early TMC subsidence after ACCF, and patients with a low CT value of the inferior vertebral body of the operative segment have a higher risk of TMC subsidence in the early postoperative period.

Trial registration: This study is undergoing retrospective registration.

Risk Factors and Radiologic Changes in Subsidence after Single-Level Anterior Cervical Corpectomy: A Minimum Follow-Up of 2 Years

Objective

Anterior cervical corpectomy using a titanium mesh cage may result in delayed nonunion and thus a change in cervical alignment, and patients may require revision surgery. We investigated the radiologic and clinical outcomes of cervical corpectomy and the risk factors for subsidence.

Methods

We studied 74 patients who underwent single-level anterior cervical corpectomy for cervical spondylotic myelopathy with or without ossification of the posterior longitudinal ligament between 2007 and 2014. Graft subsidence was considered present when there was a reduction in the anterior and posterior heights by an average of 4 mm or more 2 years after the operation. We measured cervical parameters before surgery, immediately after surgery, and 6, 12, and 24 months after surgery. The clinical outcomes were the neck and arm visual analog scale scores and reoperation rate.

Results

In the subsidence group, these values gradually decreased over the 24 months. The radiologic parameters did not differ between the 2 groups for 24 months after the onset of subsidence. There were no differences in clinical outcome or reoperation rate. In the analysis of the risk factors, subsidence occurred with a large T1 slope and a large change in the C27 Cobb angle (p=0.020 and p=0.026, respectively).

Conclusion

Subsidence gradually occurred after single-level anterior cervical corpectomy for up to 24 months. However, the presence of subsidence did not affect the radiologic and clinical outcomes. When the T1 slope was large and the C27 Cobb angle change was severe, more subsidence occurred.

Biomechanics of Additively Manufactured Metallic Scaffolds-A Review

This review paper is related to the biomechanics of additively manufactured (AM) metallic scaffolds, in particular titanium alloy Ti6Al4V scaffolds. This is because Ti6Al4V has been identified as an ideal candidate for AM metallic scaffolds. The factors that affect the scaffold technology are the design, the material used to build the scaffold, and the fabrication process. This review paper includes thus a discussion on the design of Ti6A4V scaffolds in relation to how their behavior is affected by their cell shapes and porosities. This is followed by a discussion on the post treatment and mechanical characterization including in-vitro and in-vivo biomechanical studies. A review and discussion are also presented on the ongoing efforts to develop predictive tools to derive the relationships between structure, processing, properties and performance of powder-bed additive manufacturing of metals. This is a challenge when developing process computational models because the problem involves multi-physics and is of multi-scale in nature. Advantages, limitations, and future trends in AM scaffolds are finally discussed. AM is considered at the forefront of Industry 4.0, the fourth industrial revolution. The market of scaffold technology will continue to boom because of the high demand for human tissue repair.

Determining the Difference in Clinical and Radiologic Outcomes Between Expandable and Nonexpandable Titanium Cages in Cervical Fusion Procedures: A Systematic Review and Meta-Analysis

BACKGROUND

Expandable cages have been increasingly used in cervical and lumbar reconstructions; however, there is a paucity in the literature on how they compare with traditional nonexpandable cages in the cervical spine. We present a systematic review and meta-analysis, comparing the clinical and radiologic outcomes of expandable versus nonexpandable corpectomy cage use in the cervical spine.

METHODS

A database search identified studies detailing the outcomes of expandable and nonexpandable titanium cage use in the cervical spine. These studies were screened using the PRISMA protocol. Fixed-effects and random-effects models were used with a 95% confidence interval. Two analyses were carried out for each outcome: one including all studies and the other including only studies reporting on exclusively 1-level and 2-level cases.

RESULTS

Forty-one studies were included. The mean change in segmental lordosis was significantly greater in expandable cages (all, 6.72 vs. 3.69°, P < 0.001; 1-level and 2-level, 6.81° vs. 4.31°, P < 0.001). The mean change in cervical lordosis was also significantly greater in expandable cages (all, 5.71° vs. 3.11°, P = 0.027; 1-level and 2-level, 5.71° vs. 2.07°, P = 0.002). No significant difference was found between the complication rates (all, P = 0.43; 1-level and 2-level, P = 0.94); however, the proportion of revisions was significantly greater in expandable cages (all, 0.06 vs. 0.02, P = 0.03; 1-level and 2-level, 0.08 vs. 0.01, P = 0.017).

CONCLUSIONS

The use of expandable cages may carry a modest improvement in radiologic outcomes compared with nonexpandable cages in the cervical spine; however, they may also lead to a higher rate of revisions based on our analyses.

Anterior Cervical Corpectomy and Fusion and Anterior Cervical Discectomy and Fusion Using Titanium Mesh Cages for Treatment of Degenerative Cervical Pathologies: A Literature Review

Anterior cervical corpectomy and fusion (ACCF) and anterior cervical discectomy and fusion (ACDF) are 2 effective and safe surgical treatments of degenerative cervical pathologies and are associated with a high percentage of excellent clinical outcomes when a graft or device must be used during the surgery, such as an allograft, autograft, nano-hydroxyapatite/polyamide cages, poly-ether-ether-ketone (PEEK) cages, and titanium mesh cages (TMCs). Although TMCs have been used in cervical surgeries for almost 2 decades, no specific reviews have been performed introducing the state of this material. Thus, in the present review, we discuss the status of using TMCs in anterior cervical surgeries.

Studies that tested the usage of TMCs in treating degenerative cervical pathologies were included in this review. The development and progress of TMCs, the biomechanical analysis of TMCs, the radiological and clinical assessment of TMCs, the advantages and disadvantages of using TMCs, and their prospects for future applications as a device of ACCF and ACDF in treating degenerative cervical pathologies are discussed.

Studies included in this review showed that TMCs can provide sufficient biomechanical stability. Furthermore, the TMCs used in anterior cervical fusion avoid the donor-site morbidity and achieve a solid bony fusion. However, there are some shortcomings. The structural characteristics and the design of TMCs cause the TMC subsidence rate to remain high, thus resulting in multiple related complications.

We believe that due to the virtues of TMCs, they are worthy of application and promotion. However, the structure of TMCs should be further optimized to reduce the TMC subsidence rate and subsidence-related complications, ultimately achieving excellent clinical results.

Clinical and radiography results of mini-plate fixation compared to suture suspensory fixation in cervical laminoplasty: A five-year follow-up study

OBJECTIVES

Lamina closure is the most common reason for failure of unilateral open-door laminoplasty. Mini-plate fixation was designed to solve such problem. We assessed the clinical outcomes and radiography results of mini-plate fixation by comparing it with suture suspension fixation.

PATIENTS AND METHODS

This prospective study enrolled 57 patients with multi-segment cervical spondylotic myelopathy between January 2008 and March 2010. Thirty-four patients underwent laminoplasty with mini-plate fixation (mini-plate group) whereas 23 patients underwent laminoplasty with suture suspension fixation (suture group). The neurological function was measured with the Japanese Orthopedic Association (JOA) score. Cervical range of motion (ROM), C2-7 angle, and the spinal canal expansive parameters (anteroposterior diameter, Pavlov's ratio, cross-sectional area, and open angles) were evaluated.

RESULTS

The mean follow-up time was 64 (60-82) months. There were no significant differences in preoperative JOA scores (p=0.191), postoperative JOA scores (p=0.700), preoperative cervical ROM (p=0.315) and preoperative C2-7 angle (p=0.074) between the two groups. Both groups had significant postoperative JOA improvement (p<0.05). The mini-plate group had larger cervical ROM (p=0.041) and C2-7 angle (p=0.040) than the suture group at the final follow-up. Both groups showed significant improvement in the spinal canal expansive parameters immediately after the surgery. In the suture group, the parameters, such as anteroposterior diameter, Pavlov's ratio, cross-sectional area, and open angles, decreased along with time, mainly within the first 6 months following the operation. In the mini-plate group, these parameters remained unchanged. The spinal canal expansive parameters between the 2 groups were not significantly different immediately following the operation, but were significantly different at the final follow-up (p<0.05). Three patients in the suture group displayed neurological deterioration due to lamina reclosure.

CONCLUSIONS

Laminoplasty by mini-plate fixation preserved more cervical ROM and better cervical alignment, maintained cervical spine canal expansive stability and effectively avoided lamina reclosure for a long-term follow-up.

Comparison of anterior cervical fusion by titanium mesh cage versus nano-hydroxyapatite/polyamide cage following single-level corpectomy

PURPOSE

The titanium mesh cage (TMC) is a typical metal cage device which has been widely used in cervical reconstruction for decades. Nano-hydroxyapatite/polyamide-66 (n-HA/PA66) cage is a novel biomimetic non-metal cage device growing in popularity in many medical centres in recent years. There has been no comparison of the efficacy between these two anterior reconstructing cages. The purpose of this study was to compare the radiographic and clinical outcomes of these two different devices.

METHODS

Sixty-seven eligible patients with single-level ACCF using TMC or n-HA/PA66 cage for cervical degenerative diseases, with four-year minimum follow-up, were included in this prospective non-randomised comparative study. Their radiographic (cage subsidence, fusion status, segmental sagittal alignment [SSA]) and clinical (VAS and JOA scales) data before surgery and at each follow-up was recorded completely.

RESULTS

The fusion rate of the n-HA/PA66 group was higher than TMC at one year after surgery (94% vs. 84%) though their finial fusion rates were similar (97% vs. 94%). Finial n-HA/PA66 cage subsidence was 1.5 mm with 6% of severe subsidence over three millimetres, which was significantly lower than the respective 2.9 mm and 22% of TMC (P < 0.0001). Lastly, SSA, VAS and JOA in TMC group were worse than in the n-HA/PA66 group (P = 0.235, 0.034 and 0.007, respectively).

CONCLUSIONS

The n-HA/PA66 cage is associated with earlier radiographic fusion, less subsidence and better clinical results than TMC within four years after one-level ACCF. With the added benefit of radiolucency, the n-HA/PA66 cage may be superior to TMC in anterior cervical construction.

Evaluation of a new type of titanium mesh cage versus the traditional titanium mesh cage for single-level, anterior cervical corpectomy and fusion

STUDY DESIGN

A retrospective review of prospectively collected data in an academic institution.

OBJECTIVE

To evaluate the safety and efficacy of a new type of titanium mesh cage (TMC) in single-level, anterior cervical corpectomy and fusion (ACCF).

METHODS

Fifty-eight patients consecutive with cervical spondylotic myelopathy (CSM) from cervical degenerative spondylosis and isolated ossification of the posterior longitudinal ligament were treated with a single-level ACCF using either a new type of TMC (28 patients, group A) or the traditional TMC (30 patients, group B). We evaluated the patients for TMC subsidence, cervical lordosis (C2-C7 Cobb and Cobb of fused segments) and fusion status for a minimum of 30 months postoperatively based on spine radiographs. In addition, neurologic outcomes were evaluated using the Japanese Orthopedic Association (JOA) scores. Neck pain was evaluated using a 10-point visual analog scale (VAS).

RESULTS

The loss of height of the fused segments was less for group A than for group B (0.8 ± 0.3 vs. 2.8 ± 0.4 mm) (p < 0.01); also, there was a lower rate of severe subsidence (≥3 mm) in group A (4 %, 1/28) than in group B (17 %, 5/30) (p < 0.01). There were no differences in the C2-C7 Cobb and Cobb of fused segments between the groups preoperatively or at final follow-up (p > 0.05), but the Cobb of fused segments immediately postoperative were significantly less for group B than for group A (p < 0.01). All patients, however, had successful fusion (100 %, each). Both groups had marked improvement in the JOA score after operation (p < 0.01), with no significant differences in the JOA recovery ratio (p > 0.05). The postoperative VAS neck pain scores for group A were significantly less than that for group B (p < 0.05); severe subsidence was correlated with neck pain.

CONCLUSIONS

The new type of TMC provides comparable clinical results and fusion rates with the traditional TMC for patients undergoing single-level corpectomy. The new design TMC decreases postoperative subsidence (compared to the traditional TMC); the unique design of the new type of TMC matches the vertebral endplate morphology which appears to decrease the severity of subsidence-related neck pain in follow-up.

Biomechanical comparison of anterior cervical spine instrumentation techniques with and without supplemental posterior fusion after different corpectomy and discectomy combinations: Laboratory investigation

OBJECT

The objective of this study was to compare the stiffness and range of motion (ROM) of 4 cervical spine constructs and the intact condition. The 4 constructs consisted of 3-level anterior cervical discectomy with anterior plating, 1-level discectomy and 1-level corpectomy with anterior plating, 2-level corpectomy with anterior plating, and 2-level corpectomy with anterior plating and posterior fixation.

METHODS

Eight human cadaveric fresh-frozen cervical spines from C2-T2 were used. Three-dimensional motion analysis with an optical tracking device was used to determine motion following various reconstruction methods. The specimens were tested in the following conditions: 1) intact; 2) segmental construct with discectomies at C4-5, C5-6, and C6-7, with polyetheretherketone (PEEK) interbody cage and anterior plate; 3) segmental construct with discectomy at C6-7 and corpectomy of C-5, with PEEK interbody graft at the discectomy level and a titanium cage at the corpectomy level; 4) corpectomy at C-5 and C-6, with titanium cage and an anterior cervical plate; and 5) corpectomy at C-5 and C-6, with titanium cage and an anterior cervical plate, and posterior lateral mass screw-rod system from C-4 to C-7. All specimens underwent a pure moment application of 2 Nm with regards to flexion-extension, lateral bending, and axial rotation.

RESULTS

In all tested motions the statistical comparison was significant between the intact condition and the 2-level corpectomy with anterior plating and posterior fixation construct. All other statistical comparisons between the instrumented constructs were not statistically significant except between the 3-level discectomy with anterior plating and the 2-level corpectomy with anterior plating in axial rotation. There were no statistically significant differences between the 1-level discectomy and 1-level corpectomy with anterior plating and the 2-level corpectomy with anterior plating in any tested motion. There was also no statistical significance between the 3-level discectomy with anterior plating and the 2-level corpectomy with anterior plating and posterior fixation.

CONCLUSIONS

This study demonstrates that segmental plate fixation (3-level discectomy) affords the same stiffness and ROM as circumferential fusion in 2-level cervical spine corpectomy in the immediate postoperative setting. This obviates the need for staged circumferential procedures for multilevel cervical spondylotic myelopathy. Given that the posterior segmental instrumentation confers significant stability to a multilevel cervical corpectomy, the surgeon should strongly consider the placement of segmental posterior instrumentation to significantly improve the overall stability of the fusion construct after a 2-level cervical corpectomy.

Long-term follow-up of cervical radiographic sagittal spinal alignment after 1- and 2-level cervical corpectomy for the treatment of spondylosis of the subaxial cervical spine causing radiculomyelopathy or myelopathy: a retrospective study

Object

Few data exist regarding long-term outcomes after cervical corpectomy for spondylotic cervical myelopathy and radiculomyelopathy. In this retrospective review, long-term radiographic outcomes are reported for 130 patients after 1- or 2-level cervical corpectomy for spondylotic myelopathy or radiculomyelopathy.

Methods

Electronic medical records including clinical data and radiographic images during a 15-year period (1993–2008) were reviewed at the Cincinnati Department of Veterans Affairs Medical Center. All patients underwent radiographic follow-up for at least 12 months (range 12–156, mean 45 ± 39.3 months), as well as clinical follow-up performed by neurosurgery staff for a mean of 29.3 ± 39.6 months (range 4–156 months). Clinical parameters at surgery and last examination included the Chiles modified Japanese Orthopaedic Association (mJOA) Myelopathy Scale. Measurements included cervical spine sagittal alignment on lateral radiographs preoperatively and postoperatively, focal Cobb angles at operated levels, and C2–7 regional alignment. Statistical analysis included the Student t-test and chi-square test. Perioperative complications and additional surgery in the cervical spine were recorded.

Results

The mJOA scores improved from a mean of 11.91 ± 2.4 preoperatively to 14.9 ± 2.33 postoperatively. The mean sagittal lordosis of the C2–7 spine increased from −16.2° ± 9.2° preoperatively to −18.5° ± 11.9° at last follow-up. Focal Cobb angles averaged a slight kyphotic angulation of 4.1° ± 2.3° at latest radiographic follow-up; of note, 7 patients (5.4%), all who had cylindrical titanium mesh cages (CTMCs), showed severe kyphotic angulation (+8.4° ± 2.4°). Patients with preoperative myelopathy showed clinical improvement at follow-up. The fusion rate was 96.2%; 3 of the 5 patients with radiographic evidence of nonfusion were smokers. Patients with postoperative kyphosis had significantly more chronic neck pain (visual analog scale score >4 lasting more than 6 months) and visits related to pain (p <0.01). Those with CTMCs had higher rates of postoperative kyphosis, chronic neck pain, and visits related to pain, irrespective of the number of levels fused (p <001). At latest follow-up, although a kyphotic increase occurred in the focal cervical sagittal Cobb angles, lordosis increased in C2–7 sagittal Gore angles. Two patients (1.5%) underwent revision of the implanted graft and/or hardware, and 5 patients (3.8%) had another procedure for adjacent-level pathologies 1–9 years later (mean 4.4 ± 2.7 years).

Conclusions

Long-term follow-up data in our veteran population support cervical corpectomy as an effective, long-lasting treatment for spondylotic myelopathy of the cervical spine. Use of CTMCs without end caps was associated with statistically significant increased postoperative kyphotic angulation and chronic pain. Despite an increase in focal kyphosis over time, regional cervical sagittal lordotic alignment had increased at the latest follow-up. Further investigation will include the association of chronic neck pain and postoperative kyphosis, and high fusion rates among a veteran population of heavy smokers.

Surgical results and complications in a series of 71 consecutive cervical spondylotic corpectomies

BACKGROUND

Cervical corpectomy is a common procedure in spondylosis. It is normally a well-tolerated surgery and clinical improvement is widely described. However, it is associated with potential risky complications (subsidence, clinical deterioration, vertebral artery injury...); thus, a judicious surgical indication and a good technique are required.

METHODS

We revised retrospectively the clinical evolution and complications of 71 spondylotic corpectomies in a series of 100 consecutive patients operated on due to different ethiological causes from January 2001 to September 2007 at our hospital.

RESULTS

Among the 71 cases, a single-level corpectomy was performed in 46 cases and a two level in 25. The graft we used was a titanium mesh filled with bone from the removed vertebra in 69 cases and a telescopic cage in two additional cases. We stabilized the construction with a locking plate. The presurgical clinical status of patients, according to the Nurick grading scale was as follows: 30 patients were grade 0, 12 were grade 1, eight were grade 2, 14 were grade 3, five were grade 4 and two were grade 5. After decompression, 41 patients were considered cured, three were grade 1, seven were grade 2, 11 were grade 3, seven were grade 4 and one was grade 5. One patient died in the postoperative period. Globally, 44 (62%) patients achieved good or excellent results (grades 0-1), 15 (21%) remained as previously (grade >1), six (8%) improved partially and five (7%) worsened. Forty (95%) grades 0 and 1 patients became cured, and four (50%), four (31%) and two (28%) grades 2, 3 and 4-5, respectively, experienced a postsurgical improvement. Significant complications occurred in 18 (25%) patients. The most significant were: hardware failure (n = 7), subsidence in five cases (one required intervention) and incorrect screw placement in two (one required intervention); permanent dysphagia (n = 4) and dysphonia (n = 1); postsurgical neurological worsening in three cases (two improved and one remained grade 4); vertebral artery injury in one case; and an urgent evacuation of a prevertebral hematoma. One patient died due to respiratory disturbances.

CONCLUSIONS

Cervical corpectomy is efficient for spinal cord decompression, especially when anterior components (disk osteophyte, OPLL...) bulge in the spinal cord. A three or more level corpectomy was not considered in this series since they may be associated to high rate morbidity. We found that this decompression led to better clinical results in patient grades 0 and 1 and to poorer results as myelopathy progressed. Among complications, subsidence was the most frequent specific one, but since it was rarely associated with symptoms, the majority of patients were successfully treated conservatively.

Hybrid decompression technique and two-level corpectomy are effective treatments for three-level cervical spondylotic myelopathy

The optimal surgical strategy for multilevel cervical spondylotic myelopathy (CSM) has not been defined, and few comparative researches between hybrid decompression and multilevel corpectomy have been conducted. Here, we reported 28 patients of three-level CSM, of whom 12 underwent hybrid decompression and 16 two-level corpectomy, with each type of procedure chosen according to radiologic characteristics of those patients. Clinical and radiologic parameters of both groups showed various degrees of improvement. However, no statistically significant differences in Japanese Orthopedic Association (JOA) score improvement rate, graft fusion rate, post-operative neck disability index (NDI) or segmental lordosis between the two groups were found. We conclude that both hybrid decompression and two-level corpectomy could obtain satisfying clinical efficacy in the management of three-level CSM for appropriate patients.

Metallic Scaffolds for Bone Regeneration

Bone tissue engineering is an emerging interdisciplinary field in Science, combining expertise in medicine, material science and biomechanics. Hard tissue engineering research is focused mainly in two areas, osteo and dental clinical applications. There is a lot of exciting research being performed worldwide in developing novel scaffolds for tissue engineering. Although, nowadays the majority of the research effort is in the development of scaffolds for non-load bearing applications, primarily using soft natural or synthetic polymers or natural scaffolds for soft tissue engineering; metallic scaffolds aimed for hard tissue engineering have been also the subject of in vitro and in vivo research and industrial development. In this article, descriptions of the different manufacturing technologies available to fabricate metallic scaffolds and a compilation of the reported biocompatibility of the currently developed metallic scaffolds have been performed. Finally, we highlight the positive aspects and the remaining problems that will drive future research in metallic constructs aimed for the reconstruction and repair of bone.

Correlation between change in graft height and change in segmental angle following central corpectomy for cervical spondylotic myelopathy

Object

This study was undertaken to examine the correlation between change in graft height and change in angulation across grafted segments (segmental angle) in patients undergoing central corpectomy (CC) with autologous bone reconstruction for cervical spondylotic myelopathy (CSM).

Methods

The authors performed a retrospective analysis of 70 cases in which patients with CSM underwent uninstrumented single- or multilevel CC and had evidence of osseous fusion of their grafts at follow-up. The segmental angles and heights of the grafted segments on preoperative, postoperative, and follow-up radiographs were compared.

Results

The mean change in graft height (± standard deviation) was −7.3 ± 3.8 mm (mean duration of follow-up 19.7 ± 5.4 months, range 13–53 months). There was a mean kyphotic change in segmental angle of −7.3 ± 3.8° (p < 0.001). In patients who had a straight or kyphotic cervical spine (28 patients) or a straight or kyphotic segment (32 patients) preoperatively, there was a significant linear correlation between changes in graft height and changes in segmental angle (Pearson correlation, r = 0.40, p = 0.03; r = 0.40, p = 0.02, respectively). Such a correlation was not seen in the patients who had a lordotic cervical spine (42 patients) or a lordotic segment (38 patients) preoperatively (Pearson correlation, r = −0.04, p = 0.81; r = 0.08, p = 0.62, respectively). The change in segmental angle did not influence improvement in Nurick grade (p = 0.8). The degree of agreement between the 2 observers was almost perfect for measurement of graft height (postoperative intraclass correlation coefficient [ICC] = 0.94, follow-up ICC = 0.90) but was significantly lower for measurement of segmental angles (postoperative ICC = 0.71, follow-up ICC = 0.67).

Conclusions

Among patients undergoing uninstrumented CC for CSM, there is a significant correlation between postoperative settling and kyphotic change across fused segments in those who had straight or kyphotic cervical spines or segments preoperatively but not in those who had lordotic cervical spines or segments preoperatively. A more vigorous surgical correction of the segmental kyphosis than achieved in this study might have caused the kyphotic segments to behave like the lordotic segments. Paraspinal muscles and ligaments may play a role in determining the segmental angle as graft settling in patients with lordotic spines or segments is not linearly correlated with angular change.