An in vitro synthetic biology platform for emerging industrial biomanufacturing: Bottom-up pathway design

Process simulation and evaluation of scaled-up biocatalytic systems: Advances, challenges, and future prospects

With the increased demand for bio-based products and the rapid development of biomanufacturing technologies, biocatalytic reactions including microorganisms and enzyme based, have become promising approaches. Prior to the scale-up of production process, environmental and economic feasibility analysis are essential for the development of a sustainable and intelligent bioeconomy in the context of industry 4.0. To achieve these goals, process simulation supports system optimization, improves energy and resource utilization efficiencies, and supports digital bioprocessing. However, due to the insufficient understanding of cellular metabolism and interaction mechanisms, there is still a lack of rational and transparent simulation tools to efficiently simulate, control, and optimize microbial/enzymatic reaction processes. Therefore, there is an urgent need to develop frameworks that integrate kinetic modeling, process simulation, and sustainability analysis for bioreaction simulations and their optimization. This review summarizes and compares the advantages and disadvantages of different process simulation software and models in simulating biocatalytic processes, identifies the limitations of traditional reaction kinetics models, and proposes the requirement of simulations close to real reactions. In addition, we explore the current state of kinetic modeling at the microscopic scale and how process simulation can be linked to kinetic models of cellular metabolism and computational fluid dynamics modeling. Finally, this review discusses the requirement of sensitivity analysis and how machine learning can assist with optimization of simulations to improve energy efficiency and product yields from techno-economic and life cycle assessment perspectives.

Architectural engineering of Cyborg Bacteria with intracellular hydrogel

Synthetic biology primarily uses genetic engineering to control living cells. In contrast, recent work has ushered in the architectural engineering of living cells through intracellular materials. Specifically, Cyborg Bacteria are created by incorporating synthetic PEG-based hydrogel inside cells. Cyborg Bacteria do not replicate but maintain essential cellular functions, including metabolism and protein synthesis. Thus far, Cyborg Bacteria have been engineered using one primary composition of intracellular hydrogel components. Here, we demonstrate the versatility of controlling the physical and biochemical aspects of Cyborg Bacteria using different structures of hydrogels. The intracellular cell-gel architecture is modulated using a different photoinitiator, PEG-diacrylate (PEG-DA) of different molecular weights, 4arm PEG-DA, and dsDNA-PEG. We show that the molecular weight of the PEG-DA affects the generation and metabolism of Cyborg Bacteria. In addition, we show that the hybrid dsDNA-PEG intracellular hydrogel controls protein expression levels of the Cyborg Bacteria through post-transcriptional regulation and polymerase sequestration. Our work creates a new frontier of modulating intracellular gel components to control Cyborg Bacteria function and architecture.

A Light-Driven In Vitro Enzymatic Biosystem for the Synthesis of α-Farnesene from Methanol

Terpenoids of substantial industrial interest are mainly obtained through direct extraction from plant sources. Recently, microbial cell factories or in vitro enzymatic biosystems have emerged as promising alternatives for terpenoid production. Here, we report a route for the synthesis of α-farnesene based on an in vitro enzyme cascade reaction using methanol as an inexpensive and renewable C1 substrate. Thirteen biocatalytic reactions divided into 2 modules were optimized and coupled to achieve methanol-to-α-farnesene conversion via integration with natural thylakoid membranes as a green energy engine. This in vitro enzymatic biosystem driven by light enabled the production of 1.43 and 2.40 mg liter-1 α-farnesene using methanol and the intermediate glycolaldehyde as substrates, respectively. This work could provide a promising strategy for developing light-powered in vitro biosynthetic platforms to produce more natural compounds synthesized from C1 substrates.

Enhancing l-Malic Acid Production in Aspergillus niger via Natural Activation of sthA Gene Expression

The efficient production of l-malic acid using Aspergillus niger requires overcoming challenges in synthesis efficiency and excessive byproduct buildup. This study addresses these hurdles, improving the activity of NADH-dependent malate dehydrogenase (Mdh) in the early stages of the fermentation process. By employing a constitutive promoter to express the Escherichia coli sthA responsible for the transfer of reducing equivalents between NAD(H) and NADP(H) in A. niger, the l-malic acid production was significantly elevated. However, this resulted in conidiation defects of A. niger, limiting industrial viability. To mitigate this, we discovered and utilized the PmfsA promoter, enabling the specific expression of sthA during the fermentation stage. This conditional expression strain showed similar phenotypes to its parent strain while exhibiting exceptional performance in a 5 L fermenter. Notably, it achieved a 65.5% increase in productivity, reduced fermentation cycle by 1.5 days, and lowered succinic acid by 76.2%. This work marks a promising advancement in industrial l-malic acid synthesis via biological fermentation, showcasing the potential of synthetic biology in A. niger for broader applications.

Israel and the global synthetic biology ecosystem

The field of synthetic biology emerged a few decades ago, following some key works of researchers in the USA, Europe, and the Far East. It reached Israel through academia and a few years later it finally got the attention of industry, venture capitals, and government authorities, especially the Israeli Innovation Authority, hoping to encourage entrepreneurs to establish startups in this field. Here we provide an overview of the activity of the field of synthetic biology in Israel, including historical notes, current strategy, prospects and developments, and further insight that are relevant to any stakeholders in the synthetic biology field.

Bioelectrocatalytic Synthesis: Concepts and Applications

Bioelectrocatalytic synthesis is the conversion of electrical energy into value-added products using biocatalysts. These methods merge the specificity and selectivity of biocatalysis and energy-related electrocatalysis to address challenges in the sustainable synthesis of pharmaceuticals, commodity chemicals, fuels, feedstocks and fertilizers. However, the specialized experimental setups and domain knowledge for bioelectrocatalysis pose a significant barrier to adoption. This review introduces key concepts of bioelectrosynthetic systems. We provide a tutorial on the methods of biocatalyst utilization, the setup of bioelectrosynthetic cells, and the analytical methods for assessing bioelectrocatalysts. Key applications of bioelectrosynthesis in ammonia production and small-molecule synthesis are outlined for both enzymatic and microbial systems. This review serves as a necessary introduction and resource for the non-specialist interested in bioelectrosynthetic research.

Synthetic NAD(P)(H) Cycle for ATP Regeneration

ATP is the energy currency of the cell and new methods for ATP regeneration will benefit a range of emerging biotechnology applications including synthetic cells. We designed and assembled a membraneless ATP-regenerating enzymatic cascade by exploiting the substrate specificities of selected NAD(P)(H)-dependent oxidoreductases combined with substrate-specific kinases. The enzymes in the NAD(P)(H) cycle were selected to avoid cross-reactions, and the cascade was driven by irreversible fuel oxidation. As a proof-of-concept, formate oxidation was chosen as the fueling reaction. ATP regeneration was accomplished via the phosphorylation of NADH to NADPH and the subsequent transfer of the phosphate to ADP by a reversible NAD⁺ kinase. The cascade was able to regenerate ATP at a high rate (up to 0.74 mmol/L/h) for hours, and >90% conversion of ADP to ATP using monophosphate was also demonstrated. The cascade was used to regenerate ATP for use in cell free protein synthesis reactions, and the ATP production rate was further enhanced when powered by the multistep oxidation of methanol. The NAD(P)(H) cycle provides a simple cascade for the in vitro regeneration of ATP without the need for a pH-gradient or costly phosphate donors.

A Hitchhiker's Guide to Supplying Enzymatic Reducing Power into Synthetic Cells

The construction from scratch of synthetic cells by assembling molecular building blocks is unquestionably an ambitious goal from a scientific and technological point of view. To realize functional life-like systems, minimal enzymatic modules are required to sustain the processes underlying the out-of-equilibrium thermodynamic status hallmarking life, including the essential supply of energy in the form of electrons. The nicotinamide cofactors NAD(H) and NADP(H) are the main electron carriers fueling reductive redox reactions of the metabolic network of living cells. One way to ensure the continuous availability of reduced nicotinamide cofactors in a synthetic cell is to build a minimal enzymatic module that can oxidize an external electron donor and reduce NAD(P)+. In the diverse world of metabolism there is a plethora of potential electron donors and enzymes known from living organisms to provide reducing power to NAD(P)+ coenzymes. This perspective proposes guidelines to enable the reduction of nicotinamide cofactors enclosed in phospholipid vesicles, while avoiding high burdens of or cross-talk with other encapsulated metabolic modules. By determining key requirements, such as the feasibility of the reaction and transport of the electron donor into the cell-like compartment, we select a shortlist of potentially suitable electron donors. We review the most convenient proteins for the use of these reducing agents, highlighting their main biochemical and structural features. Noting that specificity toward either NAD(H) or NADP(H) imposes a limitation common to most of the analyzed enzymes, we discuss the need for specific enzymes─transhydrogenases─to overcome this potential bottleneck.

A conserved sequence motif in the Escherichia coli soluble FAD-containing pyridine nucleotide transhydrogenase is important for reaction efficiency

Soluble pyridine nucleotide transhydrogenases (STHs) are flavoenzymes involved in the redox homeostasis of the essential cofactors NAD(H) and NADP(H). They catalyze the reversible transfer of reducing equivalents between the two nicotinamide cofactors. The soluble transhydrogenase from Escherichia coli (SthA) has found wide use in both in vivo and in vitro applications to steer reducing equivalents toward NADPH-requiring reactions. However, mechanistic insight into SthA function is still lacking. In this work, we present a biochemical characterization of SthA, focusing for the first time on the reactivity of the flavoenzyme with molecular oxygen. We report on oxidase activity of SthA that takes place both during transhydrogenation and in the absence of an oxidized nicotinamide cofactor as an electron acceptor. We find that this reaction produces the reactive oxygen species hydrogen peroxide and superoxide anion. Furthermore, we explore the evolutionary significance of the well-conserved CXXXXT motif that distinguishes STHs from the related family of flavoprotein disulfide reductases in which a CXXXXC motif is conserved. Our mutational analysis revealed the cysteine and threonine combination in SthA leads to better coupling efficiency of transhydrogenation and reduced reactive oxygen species release compared to enzyme variants with mutated motifs. These results expand our mechanistic understanding of SthA by highlighting reactivity with molecular oxygen and the importance of the evolutionarily conserved sequence motif.

Cell-Free Escherichia coli Synthesis System Based on Crude Cell Extracts: Acquisition of Crude Extracts and Energy Regeneration

Cell-free synthetic biology is advancing with unprecedented control and design. The development of cell-free biosynthesis involves both pure enzyme and crude enzyme systems. The relatively cheap crude enzyme system is more suitable for the scientific research needs of ordinary laboratories. The key factor in giving full play to the advantages of the system is to obtain high-quality cell crude extract and its energy regeneration system, but there is no systematic report on the development history of these two aspects. Therefore, in this paper, the development history of the process of obtaining crude extract from cell-free biosynthesis was carried out based on Escherichia coli, which is widely used at present, and the energy regeneration system was briefly introduced. Finally, the challenges of current cell-free synthetic systems are discussed.

Engineering genetic circuits: advancements in genetic design automation tools and standards for synthetic biology

Synthetic biology (SynBio) is a field at the intersection of biology and engineering. Inspired by engineering principles, researchers use defined parts to build functionally defined biological circuits. Genetic design automation (GDA) allows scientists to design, model, and analyze their genetic circuits in silico before building them in the lab, saving time, and resources in the process. Establishing SynBio's future is dependent on GDA, since the computational approach opens the field to a broad, interdisciplinary community. However, challenges with part libraries, standards, and software tools are currently stalling progress in the field. This review first covers recent advancements in GDA, followed by an assessment of the challenges ahead, and a proposed automated genetic design workflow for the future.

A cell-free self-replenishing CO2-fixing system

Biological CO2 fixation is so far the most effective means for CO2 reduction at scale and accounts for most of the CO2 fixed on Earth. Through this process, carbon is fixed in cellular components and biomass during organismal growth. To uncouple CO2 fixation from growth and cellular regulation, cell-free CO2 fixation systems represent an alternative approach since the rate can be independently manipulated. Here we designed an oxygen-insensitive, self-replenishing CO2 fixation system with opto-sensing. The system comprises a synthetic reductive glyoxylate and pyruvate synthesis (rGPS) cycle and the malyl-CoA-glycerate (MCG) pathway to produce acetyl-coenzyme A (CoA), pyruvate and malate from CO2, which are also intermediates in the cycle. We solved various problems associated with the in vitro system, and implemented opto-sensing modules to control the regeneration of cofactors. We accomplished sustained operation for 6 hours with a CO2-fixing rate comparable to or greater than typical CO2 fixation rates of photosynthetic or lithoautotrophic organisms.

Systems biology–the transformative approach to integrate sciences across disciplines

Life science is the study of living organisms, including bacteria, plants, and animals. Given the importance of biology, chemistry, and bioinformatics, we anticipate that this chapter may contribute to a better understanding of the interdisciplinary connections in life science. Research in applied biological sciences has changed the paradigm of basic and applied research. Biology is the study of life and living organisms, whereas science is a dynamic subject that as a result of constant research, new fields are constantly emerging. Some fields come and go, whereas others develop into new, well-recognized entities. Chemistry is the study of composition of matter and its properties, how the substances merge or separate and also how substances interact with energy. Advances in biology and chemistry provide another means to understand the biological system using many interdisciplinary approaches. Bioinformatics is a multidisciplinary or rather transdisciplinary field that encourages the use of computer tools and methodologies for qualitative and quantitative analysis. There are many instances where two fields, biology and chemistry have intersection. In this chapter, we explain how current knowledge in biology, chemistry, and bioinformatics, as well as its various interdisciplinary domains are merged into life sciences and its applications in biological research.

Minimal Pathway for the Regeneration of Redox Cofactors

Effective metabolic pathways are essential for the construction of in vitro systems mimicking the biochemical complexity of living cells. Such pathways require the inclusion of a metabolic branch that ensures the availability of reducing equivalents. Here, we built a minimal enzymatic pathway confinable in the lumen of liposomes, in which the redox status of the nicotinamide cofactors NADH and NADPH is controlled by an externally provided formate. Formic acid permeates the membrane where a luminal formate dehydrogenase uses NAD⁺ to form NADH and carbon dioxide. Carbon dioxide diffuses out of the liposomes, leaving only the reducing equivalents in the lumen. A soluble transhydrogenase subsequently utilizes NADH for reduction of NADP⁺ thereby making NAD⁺ available again for the first reaction. The pathway is functional in liposomes ranging from a few hundred nanometers in diameter (large unilamellar vesicles) up to several tens of micrometers (giant unilamellar vesicles) and remains active over a period of 7 days. We demonstrate that the downstream biochemical process of reduction of glutathione disulfide can be driven by the transfer of reducing equivalents from formate via NAD(P)H, thereby providing a versatile set of electron donors for reductive metabolism.

Advances in biological production of acetoin: a comprehensive overview

Acetoin, a high-value-added bio-based platform chemical, is widely used in foods, cosmetics, agriculture, and the chemical industry. It is an important precursor for the synthesis of: 2,3-butanediol, liquid hydrocarbon fuels and heterocyclic compounds. Since the fossil resources are becoming increasingly scarce, biological production of acetoin has received increasing attention as an alternative to chemical synthesis. Although there are excellent reviews on the: application, catabolism and fermentative production of acetoin, little attention has been paid to acetoin production via: electrode-assisted fermentation, whole-cell biocatalysis, and in vitro/cell-free biocatalysis. In this review, acetoin biosynthesis pathways and relevant key enzymes are firstly reviewed. In addition, various strategies for biological acetoin production are summarized including: cell-free biocatalysis, whole-cell biocatalysis, microbial fermentation, and electrode-assisted fermentation. The advantages and disadvantages of the different approaches are discussed and weighed, illustrating the increasing progress toward economical, green and efficient production of acetoin. Additionally, recent advances in acetoin extraction and recovery in downstream processing are also briefly reviewed. Moreover, the current issues and future prospects of diverse strategies for biological acetoin production are discussed, with the hope of realizing the promises of industrial acetoin biomanufacturing in the near future.

Installing a Green Engine To Drive an Enzyme Cascade: A Light-Powered In Vitro Biosystem for Poly(3-hydroxybutyrate) Synthesis

Many existing in vitro biosystems harness power from the chemical energy contained in substrates and co-substrates, and light or electric energy provided from abiotic parts, leading to a compromise in atom economy, incompatibility between biological and abiotic parts, and most importantly, incapability to spatiotemporally co-regenerate ATP and NADPH. In this study, we developed a light-powered in vitro biosystem for poly(3-hydroxybutyrate) (PHB) synthesis using natural thylakoid membranes (TMs) to regenerate ATP and NADPH for a five-enzyme cascade. Through effective coupling of cofactor regeneration and mass conversion, 20 mM PHB was yielded from 50 mM sodium acetate with a molar conversion efficiency of carbon of 80.0 % and a light-energy conversion efficiency of 3.04 %, which are much higher than the efficiencies of similar in vitro PHB synthesis biosystems. This suggests the promise of installing TMs as a green engine to drive more enzyme cascades.

Recent advances in (chemo)enzymatic cascades for upgrading bio-based resources

Developing (chemo)enzymatic cascades is very attractive for green synthesis, because they streamline multistep synthetic processes. In this Feature Article, we have summarized the recent advances in in vitro or whole-cell cascade reactions with a focus on the use of renewable bio-based resources as starting materials. This includes the synthesis of rare sugars (such as ketoses, L-ribulose, D-tagatose, myo-inositol or aminosugars) from readily available carbohydrate sources (cellulose, hemi-cellulose, starch), in vitro enzyme pathways to convert glucose to various biochemicals, cascades to convert 5-hydroxymethylfurfural and furfural obtained from lignin or xylose into novel precursors for polymer synthesis, the syntheses of phenolic compounds, cascade syntheses of aliphatic and highly reduced chemicals from plant oils and fatty acids, upgrading of glycerol or ethanol as well as cascades to transform natural L-amino acids into high-value (chiral) compounds. In several examples these processes have demonstrated their efficiency with respect to high space-time yields and low E-factors enabling mature green chemistry processes. Also, the strengths and limitations are discussed and an outlook is provided for improving the existing and developing new cascades.

Improvement of production yield of l-cysteine through in vitro metabolic pathway with thermophilic enzymes

The demand for the amino acid l-cysteine is increasing in the food, cosmetic, and pharmaceutical industries. Conventionally, the commercial production of l-cysteine is achieved by its extraction from the acid hydrolysate of hair and feathers. However, this production method is associated with the release of environmentally hazardous wastewater. Additionally, l-cysteine produced from animal sources cannot be halal-certified, which limits the market size. Although recent studies have developed an alternative commercial l-cysteine production method based on microbial fermentation, the production yield was insufficient owing to the cytotoxicity of l-cysteine against the host cells. In a previous study, we had developed an in vitrol-cysteine production method with a combination of 11 thermophilic enzymes, which yielded 10.5 mM l-cysteine from 20 mM glucose. In this study, we performed re-screening for enzymes catalyzing the rate-limiting steps of the in vitro pathway. Subsequently, the genes encoding enzymes necessary for the in vitro synthesis of l-cysteine were assembled in an expression vector and co-expressed in a single strain. To prevent the synthesis of hydrogen peroxide (H₂O₂), which is a byproduct and inhibits the enzyme activity, the redox balance in this biosynthetic pathway was maintained by replacing the H₂O₂-forming NADH oxidase with another enzymatic reaction in which pyruvate was used as a sacrificial substrate. The re-designed in vitro synthetic pathway resulted in the production of 28.2 mM l-cysteine from 20 mM glucose with a molar yield of 70.5%.

Improving diacetyl production in Corynebacterium glutamicum via modifying respiratory chain

To explore the suitability of Corynebacterium glutamicum as a chassis for diacetyl production from glucose, diacetyl metabolic pathway and the respiratory chain were linked to achieve redox balance. The carbon flux was redirected from pyruvate to diacetyl by overexpressing the α-acetolactate synthase, in combination with disruption the biosynthetic pathways of lactate, acetoin, 2,3-butanediol and acetate in C. glutamicum ATCC 13032. These modifications resulted in a sharp increase of the NADH/NAD⁺ ratio from 0.53 to 1.10, and produced 0.58 g/L diacetyl under aerobic conditions, representing a 58-fold increase over the wild type. Although the modification of the by-product pathways is an effective strategy, these disruption led to intracellular cofactor imbalance. NADH re-oxidization was further successfully solved by overexpressing of cytochrome bd oxidase. We constructed an efficient respiration-dependent cell factory by modification of the respiratory chain, improving diacetyl titer to 1.29 g/L in CGC11, decreased NADH/NAD⁺ ratio to 0.45, increased the ATP concentration from 8.51 to 10.64 μM/gDCW. To our best knowledge, this is the first report of diacetyl synthesis in C. glutamicum. Intracellular cofactor imbalance can be reduced by modification of the respiratory chain for production of diacetyl as well as other bio-based products with cofactor imbalance in C. glutamicum.

Production of Ethylene Glycol from Glycerol Using an In Vitro Enzymatic Cascade

Glycerol is a readily available and inexpensive substance that is mostly generated during biofuel production processes. In order to ensure the viability of the biofuel industry, it is essential to develop complementing technologies for the resource utilization of glycerol. Ethylene glycol is a two-carbon organic chemical with multiple applications and a huge market. In this study, an artificial enzymatic cascade comprised alditol oxidase, catalase, glyoxylate/hydroxypyruvate reductase, pyruvate decarboxylase and lactaldehyde:propanediol oxidoreductase was developed for the production of ethylene glycol from glycerol. The reduced nicotinamide adenine dinucleotide (NADH) generated during the dehydrogenation of the glycerol oxidation product d-glycerate can be as the reductant to support the ethylene glycol production. Using this in vitro synthetic system with self-sufficient NADH recycling, 7.64 ± 0.15 mM ethylene glycol was produced from 10 mM glycerol in 10 h, with a high yield of 0.515 ± 0.1 g/g. The in vitro enzymatic cascade is not only a promising alternative for the generation of ethylene glycol but also a successful example of the value-added utilization of glycerol.

Enzymatic regeneration and conservation of ATP: challenges and opportunities

Adenosine triphosphate (ATP), the universal energy currency of life, has a central role in numerous biochemical reactions with potential for the synthesis of numerous high-value products. ATP can be regenerated by three types of mechanisms: substrate level phosphorylation, oxidative phosphorylation, and photophosphorylation. Current ATP regeneration methods are mainly based on substrate level phosphorylation catalyzed by one enzyme, several cascade enzymes, or in vitro synthetic enzymatic pathways. Among them, polyphosphate kinases and acetate kinase, along with their respective phosphate donors, are the most popular approaches for in vitro ATP regeneration. For in vitro artificial pathways, either ATP-free or ATP-balancing strategies can be implemented via smart pathway design by choosing ATP-independent enzymes. Also, we discuss some remaining challenges and suggest perspectives, especially for industrial biomanufacturing. Development of ATP regeneration systems featuring low cost, high volumetric productivity, long lifetime, flexible compatibility, and great robustness could be one of the bottom-up strategies for cascade biocatalysis and in vitro synthetic biology.

Transcription Factor Engineering for High-Throughput Strain Evolution and Organic Acid Bioproduction: A Review

Metabolic regulation of gene expression for the microbial production of fine chemicals, such as organic acids, is an important research topic in post-genomic metabolic engineering. In particular, the ability of transcription factors (TFs) to respond precisely in time and space to various small molecules, signals and stimuli from the internal and external environment is essential for metabolic pathway engineering and strain development. As a key component, TFs are used to construct many biosensors in vivo using synthetic biology methods, which can be used to monitor the concentration of intracellular metabolites in organic acid production that would otherwise remain “invisible” within the intracellular environment. TF-based biosensors also provide a high-throughput screening method for rapid strain evolution. Furthermore, TFs are important global regulators that control the expression levels of key enzymes in organic acid biosynthesis pathways, therefore determining the outcome of metabolic networks. Here we review recent advances in TF identification, engineering, and applications for metabolic engineering, with an emphasis on metabolite monitoring and high-throughput strain evolution for the organic acid bioproduction.

Rational Engineering of the Substrate Specificity of a Thermostable D-Hydantoinase (Dihydropyrimidinase)

D-hydantoinases catalyze an enantioselective opening of 5- and 6-membered cyclic structures and therefore can be used for the production of optically pure precursors for biomedical applications. The thermostable D-hydantoinase from Geobacillus stearothermophilus ATCC 31783 is a manganese-dependent enzyme and exhibits low activity towards bulky hydantoin derivatives. Homology modeling with a known 3D structure (PDB code: 1K1D) allowed us to identify the amino acids to be mutated at the substrate binding site and in its immediate vicinity to modulate the substrate specificity. Both single and double substituted mutants were generated by site-directed mutagenesis at appropriate sites located inside and outside of the stereochemistry gate loops (SGL) involved in the substrate binding. Substrate specificity and kinetic constant data demonstrate that the replacement of Phe159 and Trp287 with alanine leads to an increase in the enzyme activity towards D,L-5-benzyl and D,L-5-indolylmethyl hydantoins. The length of the side chain and the hydrophobicity of substrates are essential parameters to consider when designing the substrate binding pocket for bulky hydantoins. Our data highlight that D-hydantoinase is the authentic dihydropyrimidinase involved in the pyrimidine reductive catabolic pathway in moderate thermophiles.

Cell-free protein synthesis: The transition from batch reactions to minimal cells and microfluidic devices

Thanks to the synthetic biology, the laborious and restrictive procedure for producing a target protein in living microorganisms by biotechnological approaches can now experience a robust, pliant yet efficient alternative. The new system combined with lab-on-chip microfluidic devices and nanotechnology offers a tremendous potential envisioning novel cell-free formats such as DNA brushes, hydrogels, vesicular particles, droplets, as well as solid surfaces. Acting as robust microreactors/microcompartments/minimal cells, the new platforms can be tuned to perform various tasks in a parallel and integrated manner encompassing gene expression, protein synthesis, purification, detection, and finally enabling cell-cell signaling to bring a collective cell behavior, such as directing differentiation process, characteristics of higher order entities, and beyond. In this review, we issue an update on recent cell-free protein synthesis (CFPS) formats. Furthermore, the latest advances and applications of CFPS for synthetic biology and biotechnology are highlighted. In the end, contemporary challenges and future opportunities of CFPS systems are discussed.

The Usual Suspects 2019: of Chips, Droplets, Synthesis, and Artificial Cells

Synthetic biology aims to understand fundamental biological processes in more detail than possible for actual living cells. Synthetic biology can combat decomposition and build-up of artificial experimental models under precisely controlled and defined environmental and biochemical conditions. Microfluidic systems can provide the tools to improve and refine existing synthetic systems because they allow control and manipulation of liquids on a micro- and nanoscale. In addition, chip-based approaches are predisposed for synthetic biology applications since they present an opportune technological toolkit capable of fully automated high throughput and content screening under low reagent consumption. This review critically highlights the latest updates in microfluidic cell-free and cell-based protein synthesis as well as the progress on chip-based artificial cells. Even though progress is slow for microfluidic synthetic biology, microfluidic systems are valuable tools for synthetic biology and may one day help to give answers to long asked questions of fundamental cell biology and life itself.

Developing a single strain for in vitro salvage synthesis of NAD+ at high temperatures and its potential for bioconversion

BACKGROUND

Thermostable enzymes have several advantages over their mesophilic counterparts for industrial applications. However, trade-offs such as thermal instability of enzyme substrates or co-factors exist. Nicotinamide adenine dinucleotide (NAD+) is an important co-factor in many enzyme-catalyzed oxidation-reduction reactions. This compound spontaneously decomposes at elevated temperatures and basic pH, a property that limits catalysis of NAD+/NADH-dependent bioconversions using thermostable enzymes to short timeframes. To address this issue, an "in vitro metabolic pathway" for salvage synthesis of NAD+ using six thermophilic enzymes was constructed to resynthesize NAD+ from its thermal decomposition products at high temperatures.

RESULTS

An integrated strain, E. coli DH5α (pBR-CI857, pGETS118-NAD+), that codes for six thermophilic enzymes in a single operon was constructed. Gene-expression levels of these enzymes in the strain were modulated by their sequential order in the operon. An enzyme solution containing these enzymes was prepared by the heat purification from the cell lysate of the integrated strain, and used as an enzyme cocktail for salvage synthesis of NAD+. The salvage activity for synthesis of NAD+ from its thermal decomposition products was found to be 0.137 ± 0.006 µmol min-1 g-1 wet cells. More than 50% of this initial activity remained after 24 h at 60 °C. The enzyme cocktail could maintain a NAD+ concentration of 1 mM for 12 h at 60 °C. Furthermore, this enzyme cocktail supported continuous NAD+/NADH-dependent redox reactions using only NAD+/NADH derived from host cells, without the need for addition of external NAD+.

CONCLUSIONS

The integrated strain allows preparation of an enzyme cocktail that can solve the problem of NAD+ instability at high temperatures. The strain simplifies preparation of the enzyme cocktail, and thus expands the applicability of the in vitro metabolic engineering method using thermostable enzymes. Further optimization of gene expressions in the integrated strain can be achieved by using various types of ribosome binding sites as well as promoters.

What can we learn from the construction of in vitro replication systems?

Replication is a central function of living organisms. Several types of replication systems have been constructed in vitro from various molecules, including peptides, DNA, RNA, and proteins. In this review, I summarize the progress in the construction of replication systems over the past few decades and discuss what we can learn from their construction. I introduce various types of replication systems, supporting the feasibility of the spontaneous appearance of replication early in Earth's history. In the latter part of the review, I focus on parasitic replicators, one of the largest obstacles for sustainable replication. Compartmentalization is discussed as a possible solution.

Systems metabolic engineering of Corynebacterium glutamicum for the bioproduction of biliverdin via protoporphyrin independent pathway

Background

Biliverdin, a prospective recyclable antioxidant and one of the most important precursors for optogenetics, has received growing attention. Biliverdin is currently produced by oxidation of bilirubin from mammalian bile using chemicals. However, unsustainable procedures of extraction, chemical oxidation, and isomer separation have prompted bio-based production using a microbial cell factory.

Results

In vitro thermodynamic analysis was performed to show potential candidates of bottleneck enzymes in the pathway to produce biliverdin. Among the candidates, hemA and hemL were overexpressed in Corynebacterium glutamicum to produce heme, precursor of biliverdin. To increase precursor supply, we suggested a novel hemQ-mediated coproporphyrin dependent pathway rather than noted hemN-mediated protoporphyrin dependent pathway in C. glutamicum. After securing precursors, hmuO was overexpressed to pull the carbon flow to produce biliverdin. Through modular optimization using gene rearrangements of hemA, hemL, hemQ, and hmuO, engineered C. glutamicum BV004 produced 11.38 ± 0.47 mg/L of biliverdin at flask scale. Fed-batch fermentations performed in 5 L bioreactor with minimal medium using glucose as a sole carbon source resulted in the accumulation of 68.74 ± 4.97 mg/L of biliverdin, the highest titer to date to the best of our knowledge.

Conclusions

We developed an eco-friendly microbial cell factory to produce biliverdin using C. glutamicum as a biosystem. Moreover, we suggested that C. glutamicum has the thermodynamically favorable coproporphyrin dependent pathway. This study indicated that C. glutamicum can work as a powerful platform to produce biliverdin as well as heme-related products based on the rational design with in vitro thermodynamic analysis.

Electronic supplementary material

The online version of this article (10.1186/s13036-019-0156-5) contains supplementary material, which is available to authorized users.

Real-World Synthetic Biology: Is It Founded on an Engineering Approach, and Should It Be?

Authors often assert that a key feature of 21st-century synthetic biology is its use of an 'engineering approach'; design using predictive models, modular architecture, construction using well-characterized standard parts, and rigorous testing using standard metrics. This article examines whether this is, or even should be, the case. A brief survey of synthetic biology projects that have reached, or are near to, commercial application outside laboratories shows that they showed very few of these attributes. Instead, they featured much trial and error, and the use of specialized, custom components and assays. What is more, consideration of the special features of living systems suggest that a conventional engineering approach will often not be helpful. The article concludes that the engineering approach may be useful in some projects, but it should not be used to define or constrain synthetic biological endeavour, and that in fact the conventional engineering has more to gain by expanding and embracing more biological ways of working.

Is Research on "Synthetic Cells" Moving to the Next Level?

"Synthetic cells" research focuses on the construction of cell-like models by using solute-filled artificial microcompartments with a biomimetic structure. In recent years this bottom-up synthetic biology area has considerably progressed, and the field is currently experiencing a rapid expansion. Here we summarize some technical and theoretical aspects of synthetic cells based on gene expression and other enzymatic reactions inside liposomes, and comment on the most recent trends. Such a tour will be an occasion for asking whether times are ripe for a sort of qualitative jump toward novel SC prototypes: is research on "synthetic cells" moving to a next level?