A multisyringe flow injection method for the automated determination of sulfide in waters using a miniaturised optical fiber spectrophotometer

Recent Progress of Carbon Dots for Air Pollutants Detection and Photocatalytic Removal: Synthesis, Modifications, and Applications

Rapid industrialization has inevitably led to serious air pollution problems, thus it is urgent to develop detection and treatment technologies for qualitative and quantitative analysis and efficient removal of harmful pollutants. Notably, the employment of functional nanomaterials, in sensing and photocatalytic technologies, is promising to achieve efficient in situ detection and removal of gaseous pollutants. Among them, carbon dots (CDs) have shown significant potential due to their superior properties, such as controllable structures, easy surface modification, adjustable energy band, and excellent electron-transfer capacities. Moreover, their environmentally friendly preparation and efficient capture of solar energy provide a green option for sustainably addressing environmental problems. Here, recent advances in the rational design of CDs-based sensors and photocatalysts are highlighted. An overview of their applications in air pollutants detection and photocatalytic removal is presented, especially the diverse sensing and photocatalytic mechanisms of CDs are discussed. Finally, the challenges and perspectives are also provided, emphasizing the importance of synthetic mechanism investigation and rational design of structures.

Online determination of sulfide using an optical immersion probe combined with headspace liquid-phase microextraction

A new design for headspace liquid phase microextraction in combination with an optical immersion probe (HS-LPME-OIP) was proposed and successfully tested for the determination of sulfide in wine and water samples. The developed method is based on the release of hydrogen sulfide from the aqueous phase after the addition of orthophosphoric acid and its extraction with an aqueous solution of 5,5′-dithiobis-(2-nitrobenzoic) acid (DTNB). The analytical signal was recorded using an optical probe immersed in a vial containing 200 μL of 0.1 mM DTNB solution. Using the optical immersion probe in combination with HS-LPME allowed to register the analytical signal online and significantly improve the reproducibility of sulfide determination compared to known microextraction approaches. In the proposed approach, the problems with drop stability, limitations in mixing rate or extraction time, too small volume of the acceptor phase and stability of the holding the acceptor phase in the hole of the optical probe were also satisfactorily solved. The calibration graph was linear in the range of 16–256 μg L⁻¹ with a correlation coefficient of 0.9992. The limit of detection was 6 μg L⁻¹.

A new design for headspace liquid phase microextraction combined with an optical probe.

Two simple but effective turn-on benzothiazole-based fluorescent probes for detecting hydrogen sulfide in real water samples and HeLa cells

Two simple turn-on fluorescent probes, containing a benzothiazole and the 2,4-dinitrobenzenesulfonyl group, were designed for detecting H₂S. Two probes exhibited good selectivity and high sensitivity, which were applied to detect the H₂S in real water samples. Probe P2 with a positive charge had better solubility than probe P1 in water; therefore, probe P2 was successfully applied to detect both the endogenous and exogenous H₂S in lysosomes of living HeLa cells.

All Silica Micro-Fluidic Flow Injection Sensor System for Colorimetric Chemical Sensing

This paper presents a miniature, all-silica, flow-injection sensor. The sensor consists of an optical fiber-coupled microcell for spectral absorption measurements and a microfluidic reagent injection system. The proposed sensor operates in back reflection mode and, with its compact dimensions, (no more than 200 µm in diameter) enables operation in small spaces and at very low flow rates of analyte and reagent, thus allowing for on-line or in-line colorimetric chemical sensing.

Fabricating a nano-bionic sensor for rapid detection of H2S during pork spoilage using Ru NPs modulated catalytic hydrogenation conversion

Rapid, sensitive and on-site monitoring of meat spoilage is highly essential for food safety. Hydrogen sulfide (H₂S) a typical volatile, produced during enzymatic hydrolysis is considered as a reliable marker for evaluating meat freshness. Herein, a novel nano-bionic sensor based on the superior catalytic activity of ruthenium nanoparticles (Ru NPs) has been fabricated for H₂S quantification. The activity sites of Ru NPs were poisoned in the presence of H₂S, thereby affecting its catalytic efficiency via reducing the degradation of azo dye. The developed nano-bionic sensor achieved a selective response toward H₂S, with capability for on-site surveillance of the pork freshness in the linear range (0-1800 nM). A higher correlation was obtained between the H₂S content and the total viable count during the 9-period pork spoilage process (R² = 0.9633 and 0.9769). Moreover, the proposed method exhibits high selectivity in the presence of other characteristic volatiles encountered during the pork storage process.

Determination of nanomolar dissolved sulfides in water by coupling the classical methylene blue method with surface-enhanced Raman scattering detection

In this study, we proposed a novel method for the determination of nanomolar dissolved sulfides, including H₂S, HS^-, and S^2- (defined as S(-II)) in water by coupling the classical methylene blue (MB) method with surface-enhanced Raman spectroscopy (SERS) detection. Overall, the following analytical procedures were employed: i) precipitation of S(-II) as zinc sulfide, ii) centrifugation to collect zinc sulfide, iii) derivatization of S(-II) to MB by the reaction with N, N-dimethyl-p-phenylenediamine in the presence of FeCl₃ under acidic conditions, and iv) SERS detection. Parameters affecting the derivatization and SERS detection were optimized. Under the optimized conditions, a linear range of 12.3 nmol/L-200 nmol/L for S(-II) was obtained with a correlation coefficient (R²) of 0.99. Limits of detection and quantification of the developed method were estimated to be 3.7 nmol/L and 12.3 nmol/L, respectively. In addition, the proposed method demonstrated excellent tolerance to coexisting substances, such as NO₂^-, NO₃^-, SO₃^2-, and other common ions. The proposed method demonstrates immense promise for the determination of nanomolar S(-II) in surface waters and wastewater.

Raposo MM. Optical Fiber Sensors for Biocide Monitoring: Examples, Transduction Materials, and Prospects

Antifouling biocides are toxic to the marine environment impacting negatively on the aquatic ecosystems. These biocides, namely, tributyltin (TBT) and Cu(I) compounds, are used to avoid biofouling; however, their toxicity turns TBT and Cu(I) monitoring an important health issue. Current monitoring methods are expensive and time-consuming. This review provides an overview of the actual state of the art of antifouling paints' biocides, including their impact and toxicity, as well as the reported methods for TBT and Cu(I) detection over the past decade. The principles of optical fiber sensors (OFS) applications, with focus on environmental applications, and the use of organic chemosensors in this type of sensors are debated. The multiplexing ability of OFS and their application on aquatic environments are also discussed.

Development of dual function polyamine-functionalized carbon dots derived from one step green synthesis for quantitation of Cu2+ and S2- ions in complicated matrices with high selectivity

The study of biologically important Cu²⁺ and S^2- ions has drawn great attention in the recent years since an abnormal level of these ions is an indication for health impairment. Therefore, a reliable strategy for effective fluorescence determination of Cu²⁺ and S^2- ions was developed. Simply, the method based on economical plant-dependent thermolysis procedure for efficient green synthesis of water dispersible luminescent polyamine-based carbon dots (PA@C-dots) utilizes Vitis vinifera juice as precursor with a high quantum yield (32.1%) and good photo-stability. The fluorescent PA@C-dots were characterized by different spectroscopical, physical, and structural techniques. Furthermore, the synthesized PA@C-dots can be used as an efficient dual functional fluorescent probe for the sensitive and selective estimation of Cu²⁺ and S^2- ions. The incorporation of Cu²⁺ ions and their adsorption on the surface of PA@C-dot skeleton leads to the respectable fluorescence quenching of C-dots (turn-off mode). The Cu²⁺-PA@C-dot was found to be sensitive to S^2- ions. The addition of S^2- recovers the fluorescence (turn-on mode) of Cu²⁺-PA@C-dots, thanks to its capacity for withdrawing Cu²⁺ from the shell of PA@C-dots. Fluorescence quenching in the range of 0.07-60 μM Cu²⁺ was obtained with LOD and LOQ of 0.02 and 0.066 μM, respectively. Sulfide detection provides linearity in the range of 0.8 to 95 μM with LOD and LOQ of 0.24 and 0.79 μM, respectively. The optimal excitation and emission wavelengths for all experiments are 435 nm and 498 nm, respectively. Experiment results elucidate that the proposed method is suitable for Cu²⁺and S^2- ion detection in environmental water samples. Graphical abstract Green synthesis of polyamine-functionalized nanoprobe by thermolysis method from plant source as bifunctional sensing platform for determination of Cu²⁺ and S^2- in environmental water samples.

Superb-selective chemodosimetric signaling of sulfide in the absence and in the presence of CT-DNA and imaging in living cells by a plant alkaloid berberine analogue

New berberine analogue (BER-S), as a colorimetric probe in the absence of DNA and turn-on fluorometric probe in the presence of DNA towards S²⁻ detection is reported.

Spectrophotometric determination of sulfide based on peroxidase inhibition by detection of purpurogallin formation

This paper presents a new method for spectrophotometirc detection of sulfide applying fungal peroxidase immobilized on sodium alginate. The sensing scheme was based on decrease of the absorbance of the orange compound, purpurogallin produced from pyrogallol and H2O2 as substrates, due to the inhibition of peroxidase by sulfide. Absorbance of purpurogallin was detected at 420nm by using a spectrophotometer. The proposed method could successfully detect the sulfide in the concentration range of 0.6-7.0μM with a detection limit of 0.4μM. The kinetic parameters of Michaelis-Menten with and without sulfide were also calculated. Possible inhibition mechanism of peroxidase by sulfide was deduced according to the variation of parameters and uncompetitive mechanism was observed with respect to hydrogen peroxide. The current method provides an easy to use method for sulfide detection in water samples.

Fluorescent method for the determination of sulfide anion with ZnS:Mn quantum dots

Water-soluble Mn(2+)-doped ZnS quantum dots (QDs) were prepared using mercaptoacetic acid as the stabilizer. The optical properties and structure features were characterized by X-Ray, absorption spectrum, IR spectrum and fluorescence spectrum. In pH 7.8 Tris-HCl buffer, the QDs emitted strong fluorescence peaked at 590 nm with excitation wavelength at 300 nm. The presence of sulfide anion resulted in the quenching of fluorescence and the intensity decrease was proportional to the S(2-) concentration. The linear range was from 2.5 x 10(-6) to 3.8 x 10(-5) mol L(-1) with detection limit as 1.5 x 10(-7) mol L(-1). Most anions such as F(-), Cl(-), Br(-), I(-), CH(3)CO(2) (-), ClO(4) (-), CO(3) (2-), NO(2) (-), NO(3) (-), S(2)O(3) (2-), SO(3) (2-) and SO(4) (2-) did not interfere with the determination. Thus a highly selective assay was proposed and applied to the determination of S(2-) in discharged water with the recovery of ca. 103%.

Absorbance Based Light Emitting Diode Optical Sensors and Sensing Devices

The ever increasing demand for in situ monitoring of health, environment and security has created a need for reliable, miniaturised sensing devices. To achieve this, appropriate analytical devices are required that possess operating characteristics of reliability, low power consumption, low cost, autonomous operation capability and compatibility with wireless communications systems. The use of light emitting diodes (LEDs) as light sources is one strategy, which has been successfully applied in chemical sensing. This paper summarises the development and advancement of LED based chemical sensors and sensing devices in terms of their configuration and application, with the focus on transmittance and reflectance absorptiometric measurements.

Indirect Determination of Sulfide at Ultratrace Levels in Natural Waters by Flow Injection On-Line Sorption in a Knotted Reactor Coupled with Hydride Generation Atomic Fluorescence Spectrometry

A simple and sensitive nonchromatographic approach for indirect determination of sulfide at ultratrace levels in natural waters based on its selective precipitation with Hg2+ on the inner wall of a knotted reactor (KR) was developed for flow injection on-line sorption coupled with hydride generation atomic fluorescence spectrometry (HG-AFS). With the Hg2+ pH kept at 2.0, the HgS precipitation was formed in the KR after a reaction time of 120 s. A 10% (v/v) HCl was introduced to elute the remnant inorganic mercury and to merge with the KBH4 solution (0.05% m/v) for HG-AFS detection. Under the optimal experimental conditions, the sample throughputs were 20 h(-1). The detection limit was found to be 0.05 microg L(-1), and the relative standard deviation (RSD, n = 11) for determination of 2.0 microg L(-1) sulfide was 3.3%. The developed method was successfully applied to the determination of sulfide in a variety of natural water samples and wastewater samples with the gas-phase separation and sorption apparatus.

A smart multisyringe flow injection system for analysis of sample batches with high variability in sulfide concentration

A fully automated smart multisyringe flow injection analysis (MSFIA) system for the monitoring of sulfide in a wide concentration range is proposed. It allows the determination of sulfide in samples containing suspended solids without requiring any preliminary batch sample treatment. The smart system is able to choose by itself the best approach to quantify the analyte, selecting either a spectrophotometric or a reflectometric detection. The method, carried out in a multi-commuted system, is based on the analyte release as hydrogen sulfide from the donor channel of the gas-diffusion module into an alkaline acceptor channel solution, which is merged with N,N-dimethyl-p-phenylenediamine (DMPD) and Fe(III). The in-line generated methylene blue (MB) dye can be delivered to an optical fiber diffuse reflectance sensor or to a flow-cell spectrophotometer according to the analyte concentration. The detection limit (3s(b)/S) was 4.6 microg l(-1). Two linear calibration graphs between 50-1000 and 500-10000 microg l(-1) sulfide for reflectometry and spectrophotometry, respectively, were obtained. The potentialities of this method were assessed via the determination of sulfide at a wide range of concentrations (4.6 microg l(-1) to 100 mg l(-1)). The high selectivity and sensitivity, the low reagent consumption and the miniaturization of the proposed automated method should be highlighted.

Optical fiber reflectance sensor coupled to a multisyringe flow injection system for preconcentration and determination of 1-naphthylamine in water samples

A novel optical fiber reflectance sensor is coupled to a multisyringe flow injection system (MSFIA) for the preconcentration and determination of 1-naphthylamine (NPA) in water samples using C18 disks (octadecyl groups). NPA, being a first-class carcinogen, is important from a toxicological point of view and, therefore, its quantification is of considerable interest. In this study, the Griess reaction is used for sensitive and selective spectrophotometric determination of NPA. The reaction involves conversion of nitrite into nitrous acid in acidic medium followed by diazotization of sulphanilic acid and formation of a diazonium salt. The diazonium salt is then combined with NPA to form 4-(sulphophenylazo)-1-naphthylamine, an azo dye. This compound is subsequently retained onto a C18 disk followed by spectrophotometric detection at 540 nm, and it is then eluted with methanol in water (80%, v/v), so that the C18 disk is regenerated for subsequent experiments. Under the established optimum conditions, a calibration graph for NPA was constructed. Good linearity was observed within a concentration range from 10 to 160 microg l(-1). The lineal regression equation is A=(0.0027+/-0.0001) [NPA]+(0.0296+/-0.0047), r=0.9991; relative standard deviation values obtained from the analysis of 10 samples of 10, 80 and 160 microg l(-1) are 4.7, 1.2 and 0.6%, respectively. The mean value relative errors for concentrations of 10, 80, 160 microg l(-1) are 3.4, 0.9 and 0.4%, respectively. The detection and quantification limits were 1.1 and 3.7 microg l(-1). A sampling throughput of 14 injections per hour is achieved. The repeatability calculated for five different C18 disks was E(rel)=2.8%. The proposed technique has been validated by replicate analysis (n=6) of several water samples with spiked NPA, giving satisfactory results.

Multisyringe Flow Injection Analysis: State-of-the-Art and Perspectives

In the present paper, the characteristics (apparatus, manifold design, and operation mode) of multi-syringe flow injection analysis systems are discussed and critically compared to those of flow injection analysis and sequential injection systems. Furthermore, a survey of applications proposed until the present moment is presented, with special emphasis on implementation of in-line sample treatment.

Flow-through optical fiber sensor for automatic sulfide determination in waters by multisyringe flow injection analysis using solid-phase reflectometry

A software-controlled flow-through optical fiber diffuse reflectance sensor capitalized on the implementation of disk-based solid-phase pre-concentration schemes in a multisyringe flow injection analysis (MSFIA) set-up is proposed for the trace determination of sulfide in environmental waters and wastewaters. The fully automated flowing methodology is based on Fischer's coupling reaction of sulfide with N,N-dimethyl-p-phenylenediamine (DMPD) in the presence of Fe(iii) as oxidizing reagent in a 0.5 M HCl medium. The on-line generated methylene blue dye is subsequently delivered downstream to a dedicated optode cell furnished with an octadecyl-chemically modified (C(18)) disk, while continuously recording the diffuse reflectance spectrum of the pre-concentrated compound. A double regeneration protocol is finally executed to warrant minimum background noise and negligible baseline. Under the optimized chemical and hydrodynamic conditions, the optosensing MSFIA method features coefficients of variation better than 0.7%(n= 10) at 50 microg l(-1) concentration, a linear working range of 20-200 microg l(-1) sulfide, a 3sigma(blank) detection limit of 2.9 microg l(-1) sulfide and an injection throughput of 8 h(-1) for a pre-concentration sample volume of 2.9 ml. The interfacing of the robust and versatile multisyringe flow injection-based optode with a plug-in spectrophotometer furnished with a light emitting diode assures the miniaturization of the overall flow analyzer, which is, thus, readily adaptable to real-time monitoring schemes. The potential of the multisyringe flow method was assessed via the determination of sulfide traces in water samples of different complexity (namely, freshwater, seawater and wastewater).