Disposable potentiometric sensors for monitoring cholinesterase activity

Determination of butyrylcholinesterase activity based on thiamine luminescence modulated by MnO2 nanosheets

In this paper, a novel strategy for biosensing butyrylcholinesterase (BChE) activity is developed based on manganese dioxide (MnO₂) nanosheets to modulate the photoluminescence of thiamine (TH). The oxidase-like activity of MnO₂ nanosheets enables them to catalyze the oxidation of non-fluorescent substrate TH to generate strong fluorescent thiochrome (TC). When the target BChE is introduced to form thiocholine in the presence of S-butyrylthiocholine iodide (BTCh), MnO₂ nanosheets are reduced by thiocholine to Mn²⁺, resulting in the loss of their oxidase-like activity and the reduction of TC fluorescence. Based on this, a BChE activity fluorescence biosensor is constructed utilizing the luminescence behavior variation of TH and the oxidase-like activity of MnO₂ nanosheets. The fluorescence biosensor shows a sensitive response to BChE, and the detection limit reaches 0.036 U L^-1. In addition, the feasibility of the biosensor in real samples analysis is studied with satisfactory results.

Potentiometric Carbon Quantum Dots-Based Screen-Printed Arrays for Nano-Tracing Gemifloxacin as a Model Fluoroquinolone Implicated in Antimicrobial Resistance

Antimicrobial resistance (AMR) is a neglected issue that poses a serious global threat to public health, causing long-term negative consequences at both humanitarian and economic levels. Herein, we report an unprecedented economic fabrication method of seven potentiometric screen-printed sensors for the ultra-trace determination of gemifloxacin (GEMI) as a model of the fluoroquinolones antibiotics deeply involved in the growing AMR problem. Sensors were constructed by depositing homemade carbon ink on a recycled X-ray sheet, patterned using stencils printed with an office printer in simple, cost-effective steps requiring no sophisticated equipment. Four sensors were modified using carbon quantum dots (CQDs) synthesized from dextrose through a single-step method. Sensors exhibited a linear response in the concentration ranges 10−5–10−2 M (sensors 1, 3 and 4), 10−6–10−3 M (sensor 2) and 10−6–10−2 M (sensors 5, 6 and 7). LOD allowed tracing of the target drug at a nano-molar level down to 210 nM. GEMI was successfully determined in pharmaceutical formulations and different water samples without any pretreatment steps with satisfactory recovery (96.93–105.28% with SD values < 3). All sensors revealed a long lifetime of up to several months and are considered promising tools for monitoring water quality and efficiency of water treatment measures.

In Situ Generation of Prussian Blue by MIL-53 (Fe) for Point-of-Care Testing of Butyrylcholinesterase Activity Using a Portable High-Throughput Photothermal Device

Butyrylcholinesterase (BuChE), the primary source of serum cholinesterase activity, is an indispensable biochemical marker for clinical diagnosis of liver function and organophosphorus poisoning. The requirement for bulky and expensive instruments represents a huge hindrance for point-of-care testing (POCT) of BuChE, especially in resource-limited settings. Herein, an easy-operated, economic, and portable photothermal (PT) biosensing platform for high-throughput BuChE detection was rationally designed. BuChE could "light up" the PT signal through in situ generation of Prussian blue (PB) by MIL-53 (Fe), which allowed us to translate biological signals into temperature signals. Such temperature change signals could be monitored at high throughput (six samples for a single measurement) by a miniature self-made integrated PT device via combining separable 96-well plates, a three-dimensional (3D) printed sample bracket, 808 nm lasers, and thermometers, satisfying the requirement for rapid on-site detection in a large batch with low cost. In addition, the large specific surface area, 3D network structure, and high porosity of MIL-53 (Fe) offered a beneficial platform for its reaction with enzymatic hydrolysate, resulting in high sensing sensitivity and low detection limit (0.3 U L^-1), which was at least 20 000 times lower than the normal human serum BuChE activity. This facile, affordable, and broad applicability PT sensing platform provides a beneficial reference for the rational design of other disease diagnostic approaches suitable for POCT.

Redox-Controlled Fluorescent Nanoswitch Based on Reversible Disulfide and Its Application in Butyrylcholinesterase Activity Assay

Butyrylcholinesterase (BChE) mainly contributing to plasma cholinesterase activity is an important indicator for routinely diagnosing liver function and organophosphorus poisoning in clinical diagnosis, but its current assays are scarce and frequently suffer from some significant interference and instability. Herein, we report a redox-controlled fluorescence nanoswtich based on reversible disulfide bonds, and further develop a fluorometric assay of BChE via thiol-triggered disaggregation-induced emission. Thiol-functionalized carbon quantum dots (thiol-CQDs) with intense fluorescence is found to be responsive to hydrogen peroxide, and their redox reaction transforms thiol-CQDs to nonfluorescent thiol-CQD assembly. The thiols inverse this process by a thiol-exchange reaction to turn on the fluorescence. The fluorescence can be reversibly switched by the formation and breaking of disulfide bonds caused by external redox stimuli. The specific thiol-triggered disaggregation-induced emission enables us to assay BChE activity in a fluorescence turn-on and real-time way using butyrylthiocholine iodide as the substrate. As-established BChE assay achieves sufficient sensitivity for practical determination in human serum, and is capable of avoiding the interference from micromolar glutathione and discriminatively quantifying BChE from its sister enzyme acetylcholinesterase. The first design of reversible redox-controlled nanosiwtch based on disulfide expands the application of disulfide chemistry in sensing and clinical diagnostics, and this novel BChE assay enriches the detection methods for cholinesterase activity.

Determination of acetylcholinesterase and butyrylcholinesterase activity without dilution of biological samples

Two cholinesterases: acetylcholinesterase (AChE) and butyrylcholinesterase (BChE), are known. The enzymes are important in the body and alteration of their activity has significant use in the diagnosis of poisoning, liver function, etc. Currently available methods for the determination of cholinesterases have some major drawbacks including various interferences and the inability to be used for decreasing the enzyme activity in the presence of reversible inhibitors due to sample dilution; hence, a method for dilution free assay of cholinesterases is desired. Here, microplates were modified with indoxylacetate (100 μL of 10 mmol L

Biosensors containing acetylcholinesterase and butyrylcholinesterase as recognition tools for detection of various compounds

Acetylcholinesterase (AChE) and butyrylcholinesterase (BChE) are enzymes expressed in the human body under physiological conditions. AChE is an important part of the cholinergic nerves where it hydrolyses neurotransmitter acetylcholine. Both cholinesterases are sensitive to inhibitors acting as neurotoxic compounds. In analytical applications, the enzymes can serve as a biorecognition element in biosensors as well as simple disposable sensors (dipsticks) and be used for assaying the neurotoxic compounds. In the present review, the mechanism of AChE and BChE inhibition by disparate compounds is explained and methods for assaying the enzymes activity are shown. Optical, electrochemical, and piezoelectric biosensors are described. Attention is also given to the application of sol-gel techniques and quantum dots in the biosensors’ construction. Examples of the biosensors are provided and the pros and cons are discussed.