Bismuth film electrode at a silver solid amalgam substrate as a new tool for voltammetric determination of electrochemically reducible organic compounds

How to Improve the Performance of Electrochemical Sensors via Minimization of Electrode Passivation

It follows from critical evaluation of possibilities and limitations of modern voltammetric/amperometric methods that one of the biggest obstacles in their practical applications in real sample analysis is connected with electrode passivation/fouling by electrode reaction products and/or matrix components. This review summarizes possibilities how to minimise these problems in the field of detection of small organic molecules and critically compares their potential and acceptability in practical laboratories. Attention is focused on simple and fast electrode surface renewal, the use of disposable electrodes just for one and/or few measurements, surface modification minimising electrode fouling, measuring in flowing systems, application of rotating disc electrode, the use of novel separation methods preventing access of passivating particles to electrode surface and the novel electrode materials more resistant toward passivation. An attempt is made to predict further development in this field and to stress the need for more systematic and less random research resulting in new measuring protocols less amenable to complications connected with electrode passivation.

Comparison Study of Voltammetric Behavior of Muscle Relaxant Dantrolene Sodium on Silver Solid Amalgam and Bismuth Film Electrodes

Voltammetric behavior of muscle relaxant dantrolene sodium (DAN) was studied and the voltammetric methods for its determination using polished and mercury meniscus modified silver solid amalgam electrodes (p-AgSAE and m-AgSAE) as well as using bismuth film electrode (BiFE, ex situ plating on GCE) have been proposed. These working electrodes represent the most commonly used alternatives to mercury ones which come wrongfully into disfavor because of alleged toxicity of mercury. Within this work, the obtained results of DAN determination have been completed by corresponding statistical parameters and also some electrochemical characteristics of AgSAEs and BiFE were assessed, especially in comparison with the mercury electrodes.

Environmentally-friendly in situ plated bismuth-film electrode for the quantification of the endocrine disruptor parathion in skimmed milk

An in situ bismuth-film electrode (BiFE) together with square-wave cathodic voltammetry (SWCV) was used to determine the concentration of the endocrine disruptor parathion in skimmed milk. The experimental conditions (deposition time, deposition potential and Bi (III) concentration) were optimized for the preparation of the BiFE. A glassy carbon electrode was used as the substrate. The selection of the chemical composition of the supporting electrolyte and the solution pH was aimed at improving the reduction of parathion at the BiFE surface. In addition, the parameters of the square-wave cathodic voltammetry were adjusted to improve the sensor performance. A cathodic current identified at -0.523 V increased linearly with the parathion concentration in the range of 0.2-2.0 μmol L(-1) (R=0.999). The sensitivity of the calibration curve obtained was 4.09 μA L μmol(-1), and the limits of detection (LOD) and quantification (LOQ) were 55.7 nmol L(-1) and 169.0 nmol L(-1), respectively. The performance of the sensor was tested using a sample of skimmed milk with parathion added. The same determination was carried out by UV-vis spectroscopy and the results obtained were used for the statistical evaluation of the data obtained.