Hydrogen peroxide biosensor based on microperoxidase-11 immobilized in a silica cavity array electrode

H2O2/Glucose Sensor Based on a Pyrroloquinoline Skeleton-Containing Molecule Modified Gold Cavity Array Electrode

H₂O₂-related metabolites are essential indicators in clinical diagnosis because the accumulation of such reactive oxygen species could cause the risk of cardiovascular disease. Herein, we reported an electrochemical sensor to determine H₂O₂ and glucose. The pyrroloquinoline skeleton containing molecules (PQT) were used as the electrocatalyst and the gold cavity array (GCA) electrodes as the supporting electrode. The GCA electrode was fabricated by electrodeposition using high-ordered two-dimensional polystyrene spheres as the template. The strong absorbability of iodide ions (I^-) displaced adventitious materials from the metal surface and the I^- monolayer was subsequently removed by electrochemical oxidation to get a clean electrode surface. PQT molecules were firmly immobilized on the GCA electrode and performed an excellent electrocatalytic effect on H₂O₂/glucose detection, manifested by a small overpotential and a significantly increased reduction current. A good linear correlation was observed over a wide range of 0.2 μmol/L-1.0 mmol/L with the limit of detection of 0.05 μmol/L. Moreover, the sensor can realize sensitive, accurate, and the highly selective detection of actual samples, proving its application prospect in clinical diagnosis.

Photonic Crystal of Polystyrene Nanomembrane: Signal Amplification and Low Triggered Potential Electrochemiluminescence for Tetracycline Detection

In this work, a low triggered potential electrochemiluminescence strategy based on gold-filled photonic crystals (GPCs) electrodes composed of photonic crystals self-assembled with polystyrene spheres and gold nanoparticles embedded in the gaps of the photonic crystals was proposed. The GPCs electrodes served as the detection platform to bind antigen, and Ru(bpy)₃²⁺-COOH as a luminophore was labeled on the antibody (Ab). Then, Ru(bpy)₃²⁺-COOH/Ab was connected to the immobilized antigen on the surface of the photonic crystals by the immunoreaction to avoid direct contact with the gold nanoparticles surface. ECL emission can only be initiated by electrochemical oxidation of tripropylamine (TPrA) since Ru(bpy)₃²⁺-COOH cannot be oxidized directly on the electrode surface. The TPrA^·+ and TPrA^· radicals generated by the oxidation of TPrA can spread to the vicinity of Ru(bpy)₃²⁺-COOH over a short distance and react with the Ru(bpy)₃²⁺-COOH, eventually producing ECL emission. The potential of ECL emission caused by TPrA oxidation was about 300 mV lower than that caused by Ru(bpy)₃²⁺-COOH oxidation because the oxidation potential of TPrA (0.95 V vs SCE) was lower than Ru(bpy)₃²⁺-COOH (1.25 V vs SCE). Furthermore, the photonic crystals nanomembrane has the capability to enhance electrochemiluminescence. Thereafter, tetracycline antibiotic as a model compound was successfully detected via competitive immunoassay on GPCs electrodes with a detection limit of 0.075 pg/mL (S/N = 3), which has broad application prospects in the field of analysis and detection.

Electrochemical Biosensors Employing Natural and Artificial Heme Peroxidases on Semiconductors

Heme peroxidases are widely used as biological recognition elements in electrochemical biosensors for hydrogen peroxide and phenolic compounds. Various nature-derived and fully synthetic heme peroxidase mimics have been designed and their potential for replacing the natural enzymes in biosensors has been investigated. The use of semiconducting materials as transducers can thereby offer new opportunities with respect to catalyst immobilization, reaction stimulation, or read-out. This review focuses on approaches for the construction of electrochemical biosensors employing natural heme peroxidases as well as various mimics immobilized on semiconducting electrode surfaces. It will outline important advances made so far as well as the novel applications resulting thereof.

Ordered SiO2 cavity promoted formation of gold single crystal nanoparticles towards an efficient electrocatalytic application

A [111] facet dominated gold single crystal electrode with improved electrocatalytic ability for the oxidation of ethanol and nitrite.

Structure and Catalysis of Fe(III) and Cu(II) Microperoxidase-11 Interacting with the Positively Charged Interfaces of Lipids

Numerous applications have been described for microperoxidases (MPs) such as in photoreceptors, sensing, drugs, and hydrogen evolution. The last application was obtained by replacing Fe(III), the native central metal, by cobalt ion and inspired part of the present study. Here, the Fe(III) of MP-11 was replaced by Cu(II) that is also a stable redox state in aerated medium, and the structure and activity of both MPs were modulated by the interaction with the positively charged interfaces of lipids. Comparative spectroscopic characterization of Fe(III) and Cu(II)MP-11 in the studied media demonstrated the presence of high and low spin species with axial distortion. The association of the Fe(III)MP-11 with CTAB and Cu(II)MP-11 with DODAB affected the colloidal stability of the surfactants that was recovered by heating. This result is consistent with hydrophobic interactions of MPs with DODAB vesicles and CTAB micelles. The hydrophobic interactions decreased the heme accessibility to substrates and the Fe(III) MP-11catalytic efficiency. Cu(II)MP-11 challenged by peroxides exhibited a cyclic Cu(II)/Cu(I) interconversion mechanism that is suggestive of a mimetic Cu/ZnSOD (superoxide dismutase) activity against peroxides. Hydrogen peroxide-activated Cu(II)MP-11 converted Amplex Red^® to dihydroresofurin. This study opens more possibilities for technological applications of MPs.

Microperoxidase-11/metal–organic framework/macroporous carbon for detecting hydrogen peroxide

Schematic illustrating of the fabrication and sensing principle of the newly develpoed H₂O₂ biosensor.

Enhanced electroactivity and substrate affinity of microperoxidase-11 attached to pyrene-linkers π–π stacked on carbon nanostructure electrodes

An exceptionally large electroactively connected microperoxidase-11 (MP-11) with strong affinity for organic peroxide and offering a high electrocatalytic reduction current density of 7.5 mA cm⁻² is achieved for the first time.

Recent Progress in Ferrocene-Modified Thin Films and Nanoparticles for Biosensors

This article reviews recent progress in the development of ferrocene (Fc)-modified thin films and nanoparticles in relation to their biosensor applications. Redox-active materials in enzyme biosensors commonly use Fc derivatives, which mediate electron transfer between the electrode and enzyme active site. Either voltammetric or amperometric signals originating from redox reactions of Fc are detected or modulated by the binding of analytes on the electrode. Fc-modified thin films have been prepared by a variety of protocols, including insitu polymerization, layer-by-layer (LbL) deposition, host-guest complexation and molecular recognitions. Insitu polymerization provides a facile way to form Fc thin films, because the Fc polymers are directly deposited onto the electrode surface. LbL deposition, which can modulate the film thickness and Fc content, is suitable for preparing well-organized thin films. Other techniques, such as host-guest complexation and protein-based molecular recognition, are useful for preparing Fc thin films. Fc-modified Au nanoparticles have been widely used as redox-active materials to fabricate electrochemical biosensors. Fc derivatives are often attached to Au nanoparticles through a thiol-Au linkage. Nanoparticles consisting of inorganic porous materials, such as zeolites and iron oxide, and nanoparticle-based composite materials have also been used to prepare Fc-modified nanoparticles. To construct biosensors, Fc-modified nanoparticles are immobilized on the electrode surface together with enzymes.