Anionic polythiophene derivative as peroxidase mimetics and their application for detection of hydrogen peroxide and glucose

Colorimetric detection of chromium (VI) ion using poly(N-phenylglycine) nanoparticles acting as a peroxidase mimetic catalyst

This paper reports on enzyme-like catalytic properties of polyethylene glycol-functionalized poly(N-phenylglycine) (PNPG-PEG) nanoparticles, which have not been explored to date. The developed nanoparticles have the ability to display great inherent peroxidase-like activity at very low concentrations, and are able to catalyze the oxidation of 3,3',5,5'-tetramethylbenzidine (TMB) substrate in presence of hydrogen peroxide (H₂O₂). The oxidized product of TMB has a deep blue color with a maximum absorbance at ~655 nm. The PNPG-PEG nanoparticles exhibit K_m values of 0.2828 for TMB and 0.0799 for H₂O₂, indicating that TMB oxidation takes place at lower concentration of H₂O₂ in comparison to other nanozymes. Based on the known mechanism of H₂O₂ oxidation by hexavalent chromium [Cr(VI)] ions to generate hydroxyl radicals (^•OH), these nanoparticles were successfully applied for the colorimetric sensing of Cr(VI) ions. The sensor achieved good performance for Cr(VI) sensing with detection limits of 0.012 μM (0.01-0.1 μM linear range) and 0.52 μM (0.05-12.5 μM linear range). The detection scheme was highly selective, and successfully applied for the detection of Cr(VI) in real water samples.

Lysine-Functionalized Tungsten Disulfide Quantum Dots as Artificial Enzyme Mimics for Oxidative Stress Biomarker Sensing

The color generating from the biochemical reaction between 3,3',5,5'-tetramethylbenzidine and Lysine@WS₂ QDs was used a signal for the detection of hydrogen peroxide. The QDs were prepared using a combination of techniques, that is, probe sonication and hydrothermal treatment. Analysis via UV-vis spectroscopy, Fourier transform infrared and Raman spectroscopy, X-ray diffraction, energy-dispersive spectroscopy, and transmission electron microscopy yielded detailed information on the nature and characteristics of these quantum dots. Furthermore, as-synthesized quantum dots were studied for their capability to mimic peroxidase enzyme using 3,3',5,5'-tetramethylbenzidine as a substrate. Consequently, a colorimetric sensor utilizing Lysine@WS₂ QDs could detect hydrogen peroxide in a range of 0.1-60 μM with a response time of 5 min. The same material was used for H₂O₂ detection using impedance spectroscopy, which yielded a dynamic range of 0.1-350 μM with a response time of 30-40 s.

Ultra-small and biocompatible platinum nanoclusters with peroxidase-like activity for facile glucose detection in real samples

The highly sensitive glucose detection based on the peroxidase-like properties of nanoclusters has been gained great interest. In this work, Pericarpium Citri Reticulatae polysaccharide (PCRP) stabilized platinum nanoclusters (Pt-PCRP NCs) were prepared by a green method in which potassium tetrachloroplatinate and PCRP were simply mixed without addition of other agents. Platinum nanoclusters (Pt NCs) had ultra-small size of 1.26 ± 0.34 nm. The hydrodynamic size of Pt-PCRP NCs was 29.7 nm, and zeta potential of which was -12.0 mV. Pt-PCRP NCs showed high biocompatibility toward HeLa cells and red blood cells. In addition, Pt-PCRP NCs catalyzed the decomposition of H₂O₂ to produce •OH, which further oxidized colorless 3,3'5,5'-tetramethylbenzidine (TMB) to blue oxidized 3,3',5,5'-tetramethylbenzidine (oxTMB), exhibiting peroxidase-like property. The kinetics followed the Michaelis-Menten equation. More importantly, the colorimetric method for glucose detection using Pt-PCRP NCs had high selectivity and low detection limit for 0.38 μM. The established method based on Pt-PCRP NCs was used to precisely detect glucose detection in human serum, saliva, and sweat. Taken together, the prepared ultra-small and biocompatible Pt-PCRP NCs have good potential glucose applications in clinical diagnosis in the future.

Colorimetric sensing for ascorbic acid based on peroxidase-like of GoldMag nanocomposites

A new scheme for sensitive and rapid colorimetric detection of ascorbic acid (AA) has been developed by the GoldMag-ABTS free radical scavenging system. The well-dispersed Gold and magnetic particles (GoldMag) was successfully prepared by self-assembly method and characterized by Fourier transform infrared (FTIR), X-Ray Photoelectron Spectroscopic (XPS) techniques. Nanocomposites combine the advantages of superparamagnetic, biocompatibility and high catalytic activity of Fe₃O₄ and gold nanoparticles (AuNPs) and exhibit enhanced the intrinsic peroxidase-like activity, which can be used to catalyze the oxidation of the peroxidase substrates 2,2'-azino-bis(3-ethylbenzthiazoline-6-sulfonic acid) (ABTS) produce a green-colored product in presence of hydrogen peroxide. Ascorbic acid as an effective antioxidant have scavenging effects on ABTS radicals and induce the reduction of green ABTS.⁺ to colorless ABTS^2-, resulting in a significant green color fading. On this basis, a rapid, sensitive and selective colorimetric assay for ascorbic acid has been developed. Under optimal conditions, ascorbic acid has a linear response range from 0.01 mmol/L to 1 mmol/L with a detection limit of 0.12 μmol/L and a short assay time of the 30 s. Furthermore, the colorimetric system showed good sensitivity, stability, selectivity, and repeatability. It also successfully applied to the determination of ascorbic acid in real samples.

Enhanced peroxidase-like activity of porphyrin functionalized ZnFe2O4 hollow nanospheres for rapid detection of H2O2 and glucose

Using a simple one-pot solvothermal method, binary metal oxide, magnetic and hollow ZnFe₂O₄ nanospheres functionalized with 5,10,15,20-tetrakis(4-carboxylpheyl)-porphyrin (Por–ZnFe₂O₄ HSs) were prepared and subsequently applied as a substitute for natural peroxidase.

A colorimetric aptamer biosensor based on cationic polythiophene derivative as peroxidase mimetics for the ultrasensitive detection of thrombin

A colorimetric assay for the ultrasensitive determination of thrombin was presented, in which the cationic polythiophene derivative was used as catalyst of the 3,3',5,5'-tetramethylbenzidine (TMB)-H₂O₂ reaction and the thrombin-binding aptamer (TBA) was used as inducing polymer's different conformation elements. It was found the cationic polythiophene derivative, poly[3-(3'-N,N,N-triethylamino-1'-propyloxy)-4-methyl-2,5-t-hiophene hydrochloride] (PMNT), can catalyze the oxidation reaction of TMB in the presence of H₂O₂ to produce a blue color solution. The catalytic activity of PMNT on the TMB-H₂O₂ reaction was closely relevant to the conformation of PMNT. The absorbance of TMB-H₂O₂ was distinctly increased in the presence of TBA. With the addition of thrombin, TBA interacted with thrombin to form a G-quadruplex structure. The conformational change weakened the catalytic activity of PMNT and resulted in a decrease in the absorbance. The colorimetric sensor could detect thrombin down to 4pM with high selectivity against other interfering proteins. This work is not only of importance for a better understanding of the unique properties of cationic polythiophenes derivative but also have great potential for medical diagnostics and therapy for human health.

Improved activity and thermo-stability of the horse radish peroxidase with graphene quantum dots and its application in fluorometric detection of hydrogen peroxide

Graphene quantum dots (GQDs) have received extensive concern in many fields such as optical probe, bioimaging and biosensor. However, few reports refer on the influence of GQDs on enzyme performance. The paper reports two kinds of graphene quantum dots (termed as GO-GQDs and N,S-GQDs) that were prepared by cutting of graphene oxide and pyrolysis of citric acid and l-cysteine, and their use for the horse radish peroxidase (HRP) modification. The study reveals that GO-GQDs and N,S-GQDs exhibit an opposite effect on the HRP performance. Only HRP modified with GO-GQDs offers an enhanced activity (more than 1.9 times of pristine enzyme) and thermo-stability. This is because GO-GQDs offer a larger conjugate rigid plane and fewer hydrophilic groups compared to N,S-GQDs. The characteristics can make GO-GQDs induce a proper conformational change in the HRP for the catalytic performance, improving the enzyme activity and thermo-stability. The HRP modified with green luminescent GO-GQDs was also employed as a biocatalyst for sensing of H2O2 by a fluorometric sensor. The colorless tetramethylbenzidine (TMB) is oxidized into blue oxidized TMB in the presence of H2O2 by the assistance of HRP/GO-GQDs, leading to an obvious fluorescence quenching. The fluorescence intensity linearly decreases with the increase of H2O2 concentration in the range from 2×10-9 to 2×10-4M with the detection limit of 6.8×10-10M. The analytical method provides the advantage of sensitivity, stability and accuracy compared with present H2O2 sensors based on the pristine HRP. It has been successfully applied in the determination of H2O2 in real water samples. The study also opens a new avenue for modification of enzyme activity and stability that offers great promise in applications such as biological catalysis, biosensing and enzyme engineering.

Highly efficient detection of hydrogen peroxide in solution and in the vapor phase via fluorescence quenching

Herein we report the highly efficient and sensitive detection of hydrogen peroxide in both aqueous solution and in the vapor phase via fluorescence quenching (turn-off mechanism) of the amplified fluorescent conjugated polymer-titanium complex induced by hydrogen peroxide. Inter- and intra-polymer energy migration leads to extremely high sensitivity.

A colorimetric method of analysis for trace amounts of hydrogen peroxide with the use of the nano-properties of molybdenum disulfide

Molybdenum disulfide (MoS₂) with a layered structure was synthesized and applied for trace analysis of H₂O₂ in water based on a colorimetric method.

Water soluble polythiophenes: preparation and applications

Different synthetic procedures for water soluble polythiophenes and their applications in sensing, detection of biomolecules and optoelectronic devices are discussed.