Simultaneous quantification of antimicrobial agents for multidrug-resistant bacterial infections in human plasma by ultra-high-pressure liquid chromatography-tandem mass spectrometry

Recent Trends in Therapeutic Drug Monitoring of Peptide Antibiotics

Antimicrobial peptides take a specific position in the field of antibiotics (ATBs), however, from a large number of available molecules only a few of them were approved and are used in clinics. These therapeutic modalities play a crucial role in the management of diseases caused by multidrug-resistant bacterial pathogens and represent the last-line therapy for bacterial infections. Therefore, there is a demand for a rationale use of such ATBs based on optimization of the dosing strategy to minimize the risk of resistance and ensure the sustainable efficacy of the drug in real clinical practice. Therapeutic drug monitoring, as a measurement of drug concentration in the body fluids or tissues, results in the optimization of the patient´s medication and therapy outcome. This strategy is beneficial and could result in tailored therapy for different types of infection and the prolongation of the use and efficacy of ATBs in hospitals. This review paper provides an actual overview of approved antimicrobial peptides used in clinical practice and covers current trends in their analysis by convenient and advanced methodologies used for their identification and/or quantitation in biological matrices for therapeutic drug monitoring purposes. Special emphasis is given to the methods with perspective clinical outcomes.

A Highly Efficient Fluorescent Turn-Off Nanosensor for Quantitative Detection of Teicoplanin Antibiotic from Humans, Food, and Water Based on the Electron Transfer between Imprinted Quantum Dots and the Five-Membered Cyclic Boronate Esters

Teicoplanin has been banned in the veterinary field due to the drug resistance of antibiotics. However, teicoplanin residue from the antibiotic abuse of humans and animals poses a threat to people's health. Therefore, it is necessary to develop an efficient way for the highly accurate and reliable detection of teicoplanin from humans, food, and water. In this study, novel imprinted quantum dots of teicoplanin were prepared based on boronate affinity-based precisely controlled surface imprinting. The imprinting factor (IF) for teicoplanin was evaluated and reached a high value of 6.51. The results showed excellent sensitivity and selectivity towards teicoplanin. The relative fluorescence intensity was inversely proportional to the concentration of teicoplanin, in the range of 1.0-17 μM. And its limit of detection (LOD) was obtained as 0.714 μM. The fluorescence quenching process was mainly controlled by a static quenching mechanism via the non-radiative electron-transfer process between QDs and the five-membered cyclic boronate esters. The recoveries for the spiked urine, milk, and water samples ranged from 95.33 to 104.17%, 91.83 to 97.33, and 94.22 to 106.67%, respectively.

Study on the creation of boronate affinity-based oriented imprinted silica nanoparticles and their selective recognition toward glycopeptide antibiotics in food and water

Taking into account the drug resistance of antibiotics, teicoplanin has been banned in the veterinary field. Also, it brings threat to people's health when they eat foods containing teicoplanin residue. In addition, the abuse of teicoplanin in humans and food animals also poses a potential risk to water. Therefore, it is crucial to purify teicoplanin from food before quantifying its amount. In this study, researchers employed boronate affinity-based controlled oriented surface imprinting technique to produce molecularly imprinted polymers (MIPs) for the isolation of teicoplanin. The 3-fluoro-4-formylphenylboronic acid-functionalized silica nanoparticle substrate was first used as the supporting material for immobilizing teicoplanin. Next, the substrate surface was coated with an imprinting coating whose thickness could be controlled, produced through the self-copolymerization of dopamine and m-aminophenylboronic acid (APBA) in water. After the template was removed, 3D cavities that matched the template were created in the imprinting layer. The prepared teicoplanin-imprinted silica nanoparticles exhibited several significant satisfactory results such as good specificity, high binding capacity (46.9 ± 2.3 mg g-1), moderate binding constant ((5.46 ± 0.18) × 10-5 M-1), fast kinetics (8 min) and low binding pH (pH 5.0) toward teicoplanin. The teicoplanin-imprinted silica nanoparticles could still be reused after seven cycles of adsorption-desorption, which indicated a high chemical stability. In addition, recoveries of the proposed method for teicoplanin at three spiked levels in milk and water ranged from 91.8 to 105.6% and 92.3 to 97.4%, respectively. The teicoplanin-imprinted silica nanoparticles are capable of identifying the target teicoplanin in real samples in a simple, fast, selective and efficient manner.

Early Therapeutic Drug Monitoring Optimizes Teicoplanin Use in Febrile Neutropenic Patients with Hematological Malignancies

INTRODUCTION

A target trough concentration (Cmin) of teicoplanin ≥ 15-20 mg/L between the fourth and sixth day has been suggested for severe infections or management of febrile neutropenia (FN). Owing to no reports discussing the impact of early target attainment on treatment outcomes, this study aimed to evaluate the dose-Cmin relationship and clinical outcome and estimate the optimal early target Cmin for FN in patients with hematological malignancies.

METHODS

This single-center, prospective study enrolled patients with hematological malignancies who were treated with teicoplanin either as an empirical antibiotic for FN or as targeted treatment for Gram-positive bacteria. Blood samples were collected on day three (48 h) post-loading doses, day 5 (96 h), and day 8 (when applicable) and determined by ultrahigh-pressure liquid chromatography-triple quadruple mass spectrometry. A total of 117 samples from 47 patients with FN (27 men, 20 women) were consecutively analyzed. A two-tailed α value of 0.05 was considered statistically significant.

RESULTS

The mean Cmin values at 48 h, 96 h, and on day 8 were 23.4, 21.4, and 27.8 mg/L, respectively. The patients achieving Cmin ≥ 20 mg/L at 48 h had a higher likelihood of treatment success. The areas under the receiver operating characteristic curves were 0.71 for clinical efficacy and the cutoff value of Cmin at 48 h was 18.85 mg/L (95% confidence interval 0.55-0.87; P = 0.018).

CONCLUSIONS

The Cmin of teicoplanin after completion of loading doses could predict the treatment response, with a target concentration ≥ 18.85 mg/L.

Implementation of Modern Therapeutic Drug Monitoring and Lipidomics Approaches in Clinical Practice: A Case Study with Colistin Treatment

Nowadays, lipidomics plays a crucial role in the investigation of novel biomarkers of various diseases. Its implementation into the field of clinical analysis led to the identification of specific lipids and/or significant changes in their plasma levels in patients suffering from cancer, Alzheimer's disease, sepsis, and many other diseases and pathological conditions. Profiling of lipids and determination of their plasma concentrations could also be helpful in the case of drug therapy management, especially in combination with therapeutic drug monitoring (TDM). Here, for the first time, a combined approach based on the TDM of colistin, a last-resort antibiotic, and lipidomic profiling is presented in a case study of a critically ill male patient suffering from Pseudomonas aeruginosa-induced pneumonia. Implementation of innovative analytical approaches for TDM (online combination of capillary electrophoresis with tandem mass spectrometry, CZE-MS/MS) and lipidomics (liquid chromatography-tandem mass spectrometry, LC-MS/MS) was demonstrated. The CZE-MS/MS strategy confirmed the chosen colistin drug dosing regimen, leading to stable colistin concentrations in plasma samples. The determined colistin concentrations in plasma samples reached the required minimal inhibitory concentration of 1 μg/mL. The complex lipidomics approach led to monitoring 545 lipids in collected patient plasma samples during and after the therapy. Some changes in specific individual lipids were in good agreement with previous lipidomics studies dealing with sepsis. The presented case study represents a good starting point for identifying particular individual lipids that could correlate with antimicrobial and inflammation therapeutic management.

Integrated identification-quantification (ID-Quant) workflow utilizing UPLC-QTOF-MS for the therapeutic drug monitoring of multi-component antibiotics without pure standards: Validation using teicoplanin

The lack of individual pure standard has hampered the application of therapeutic drug monitoring (TDM) for multi-component antibiotics in clinical laboratories. Here, we aimed to develop an integrated identification-quantification (ID-Quant) workflow based on ultra-high-performance liquid chromatography coupled with quadrupole/time-of-flight mass spectrometry (UHPLC-QTOF-MS) to enable the comprehensive determination of all teicoplanin components without needing pure standards. The workflow comprises three steps. First, non-targeted MSE full scanning was used to detect and identify all potential ingredients. Then, characteristic product ions were selected to generate a quantitative time-of-flight multiple reaction monitoring (Tof-MRM) method. Finally, the constituent composition of teicoplanin injection was determined and utilized as an alternative reference standard to monitor the teicoplanin ingredients in human serum samples. As a result, nine teicoplanin analogs were identified from teicoplanin injection (Sanofi-Aventis, France). The overall performance of the Tof-MRM method was satisfactory in terms of linearity, precision, accuracy, and limits of detection. Utilizing the drug as standard, the individual concentrations for each component in patient serum were determined to be 0.120 µg/mL (A3-1), 0.020 µg/mL (N-1), 0.550 µg/mL (N-2), 0.730 µg/mL (A2-1), 4.26 µg/mL (A2-2,3), 4.79 µg/mL (A2-4,5), and 0.290 µg/mL (N-3), respectively. The distribution pattern of teicoplanin components was also discovered to differ from that in the drug injection. Overall, this integrated ID-Quant workflow based on UHPLC-QTOF-MS enables the robust quantitation of all teicoplanin analogs without the need for individual pure standard. This approach could help address the standard unavailability problem in the TDM of multi-component antibiotics.

A high performance liquid chromatography-tandem mass spectrometry assay for therapeutic drug monitoring of 10 drug compounds commonly used for antimicrobial therapy in plasma and serum of critically ill patients: Method optimization, validation, cross-validation and clinical application

BACKGROUND AND AIMS

Intensive care antibiotic treatment faces challenges due to substantial pharmacokinetic differences in critically ill patients. Individualized antibiotic dosing guided by therapeutic drug monitoring (TDM) is considered to minimize the risk of treatment failure and toxicity. This study aimed to develop a valid method for simultaneous LC-MS/MS quantification of 10 drugs frequently used in intensive care antibiotic therapy for which TDM-guided dosing is recommended: piperacillin, meropenem, flucloxacillin, cefuroxime, vancomycin, colistin A and B, linezolid, ciprofloxacin and tazobactam.

METHODS AND RESULTS

Thorough optimization of sample preparation and chromatography resulted in a fast and simple method based on protein precipitation of 50 µL plasma or serum and gradient elution using an Acquity UPLC HSS-T3 column. Electrospray ionization-triple quadrupole mass spectrometry in dynamic multiple reaction monitoring was used for quantification, covering the therapeutic range of each drug compound. Validation following EMA and FDA recommendations, including inter-platform validation and inter-laboratory comparison, demonstrated high accuracy, precision and robustness of the new method. The assay was successfully used to monitor plasma antibiotic levels of critically ill patients (n = 35).

CONCLUSION

The established multiplex method covers major drug classes with documented dosing challenges, provides a reliable basis for the implementation of high-throughput TDM, and its application confirmed the clinical impact of TDM in a real-world setting.

Therapeutic drug monitoring of glycopeptide antimicrobials: An overview of liquid chromatography-tandem mass spectrometry methods

Therapeutic drug monitoring (TDM) is a critical clinical tool used to optimize the safety and effectiveness of drugs by measuring their concentration in biological fluids. These fluids are primarily plasma or blood. TDM, together with real-time dosage adjustment, contributes highly to the successful management of glycopeptide antimicrobial therapies. Understanding pharmacokinetic/pharmacodynamic (PK/PD) properties is vital for optimizing antimicrobial therapies, as the efficacy of these therapies depends on both the exposure of the patient to the drug (PK) and pharmacodynamic (PD) parameters such as the in vitro estimated minimum drug concentration that inhibits bacterial growth (MIC). Liquid chromatography coupled to tandem mass spectrometry (LC-MS/MS) is widely recognized as the gold standard for measuring small molecules, such as antibiotics. This review provides a comprehensive overview of LC-MS/MS methods available for TDM of glycopeptide antibiotics, including vancomycin, teicoplanin, dalbavancin, oritavancin, and telavancin.

Development and validation of a bioanalytical assay for the measurement of total and unbound teicoplanin in human serum

BACKGROUND

The glycopeptide teicoplanin is considered first-line treatment for severe infections caused by Gram-positive bacteria. Individualized treatment of teicoplanin is gaining interest. As only protein-unbound drug is pharmacologically active, a sensitive assay measuring unbound and total teicoplanin is indispensable for pharmacological research and dose optimization.

OBJECTIVES

To develop and validate a UPLC-MS/MS method to quantify unbound and total teicoplanin in human serum.

METHODS

The developed assay was validated according to the ICH guideline M10 on Bioanalytical Method Validation and study sample analysis. Unbound teicoplanin was obtained by ultrafiltration. The assay was cross-validated with a quantitative microsphere (QMS) immunoassay in a side-by-side comparison using 40 patient samples.

RESULTS

With the developed and validated method, all main teicoplanin components (A2-1, A2-2/A2-3, A2-4/A2-5 and A3-1) can be quantified. Total run time was 5.5 min. Concentration range was 2.5-150 mg/L for total and 0.1-25 mg/L for unbound teicoplanin. Precision (coefficient of variation) and accuracy (bias) of total teicoplanin were 5.97% and 107%, respectively, and 7.17% and 108%, respectively, for unbound teicoplanin.Bland-Altman analysis showed total concentrations measured with the UPLC-MS/MS method were equivalent to the results of the QMS immunoassay. A total of 188 samples from 30 patients admitted to the ICU and haematology department were measured; total concentrations ranged between 2.92 and 98.5 mg/L, and unbound concentrations ranged between 0.37 and 30.7 mg/L.

CONCLUSIONS

The developed method provided rapid, precise and accurate measurement of unbound and total teicoplanin. The developed method is now routinely applied in pharmacological research and clinical practice.

An Overview of Analytical Methodologies for Determination of Vancomycin in Human Plasma

Vancomycin is regarded as the last resort of defense for a wide range of infections due to drug resistance and toxicity. The detection of vancomycin in plasma has always aroused particular concern because the performance of the assay affects the clinical treatment outcome. This article reviews various methods for vancomycin detection in human plasma and analyzes the advantages and disadvantages of each technique. Immunoassay has been the first choice for vancomycin concentration monitoring due to its simplicity and practicality, occasionally interfered with by other substances. Chromatographic methods have mainly been used for scientific research due to operational complexity and the particular requirement of the instrument. However, the advantages of a small amount of sample needed, high sensitivity, and specificity makes chromatography irreplaceable. Other methods are less commonly used in clinical applications because of the operational feasibility, clinical application, contamination, etc. Simplicity, good performance, economy, and environmental friendliness have been points of laboratory methodological concern. Unfortunately, no one method has met all of the elements so far.

A High Daptomycin Dose Is Associated with Better Bacterial Clearance in Infections Caused by Vancomycin-Resistant Enterococcus faecium Regardless of Daptomycin Minimum Inhibitory Concentration in a Rat Infective Endocarditis Model

A high daptomycin dose has been suggested for treating vancomycin-resistant Enterococcus faecium (VREf) infections. However, even a 12 mg/kg daptomycin dose might be insufficient for treating VREf with high daptomycin minimum inhibitory concentrations (MICs). Additionally, animal pharmacodynamic and infection models to confirm the efficacy of 12 mg/kg daptomycin are lacking. Male Wistar rats were used for pharmacokinetic profiling and for the development of an infective endocarditis (IE) model. Daptomycin-susceptible dose-dependent VREf (DSE) (MIC of 0.5 mg/L) and daptomycin nonsusceptible VREf (DNSE) (MIC of 8 mg/L) were used for the IE models. The bacterial load of vegetation was the primary outcome and was evaluated after 3 days of daptomycin treatment. Daptomycin administered subcutaneously (s.c.) at 45 and 90 mg/kg, which corresponded to maximum serum concentrations (Cmax) of 122.6 mg/L and 178.5 mg/L, respectively, was equivalent to doses of 8 mg/kg and 12 mg/kg, respectively, in humans. The Cmax/MIC value was correlated with the bacterial load of vegetation after treatment (r = -0.88, P < 0.001). The 90 mg/kg s.c. group showed a significantly lower bacterial load of vegetation (log10 CFU/g) than the 45 mg/kg s.c. group against DSE (0 versus 4.75, P < 0.001) and DNSE (5.12 versus 6.98, P = 0.002). The 90 mg/kg s.c. group did not sterilize the vegetation against DNSE. Although the human equivalent dose of 12 mg/kg daptomycin was more effective than the smaller dose in reducing the bacterial load in DSE and DNSE IE, the dose could not sterilize the vegetation during a DNSE treatment. Further treatment strategies by which to manage severe VREf infections, especially at high daptomycin MICs, are urgently needed. IMPORTANCE Using a rat IE model with pharmacokinetic analysis, the treatment response of VREf IE was found to be daptomycin dose-dependent, presented as Cmax/MIC or as the 24 h area under the concentration-time curve (AUC0-24)/MIC. Daptomycin 90 mg/kg s.c. significantly reduced the bacterial load against DSE and DNSE. It also showed significant activity against DSE and DNSE, compared to 45 mg/kg s.c. Although daptomycin 90 mg/kg can eradicate the bacterial load after 3 days of treatment against DSE, eradication cannot be achieved with 90 mg/kg daptomycin against DNSE.

Surface molecularly imprinted solid-phase extraction for the determination of vancomycin in plasma samples using HPLC-MS/MS

Vancomycin is a glycopeptide antibiotic used to treat infections caused by Gram-positive bacteria. Due to the narrow therapeutic index of vancomycin, it is necessary to develop a sensitive and reliable analytical method to monitor the drug concentration in plasma. A novel method based on surface molecularly imprinted solid-phase extraction combined with liquid chromatography-tandem mass spectrometry for the determination of vancomycin in plasma sample was developed. The plasma sample was cleaned up through the solid-phase extraction process before the analysis. The calibration standard of vancomycin in plasma ranged between 1 and 100 ng/mL, and the correlation coefficient (r) was 0.9993. The average recoveries were from 94.3 to 104.0%, and the precision was less than 10.5%. The limit of detection and limit of quantification were 0.5 ng/mL and 1 ng/mL, respectively. The method validated was successfully used for the detection of vancomycin in mice after oral administration.

Determination of Vancomycin and Norvancomycin Residues in Milk by Automated Online Solid-Phase Extraction Combined With Liquid Chromatography-High Resolution Mass Spectrometry

Background

Vancomycin and norvancomycin, as potent antibacterial retention drugs, were used illegally on animals bred for food, which directly affected the quality and safety of animal-derived food, and even harmed human health.

Objective

A fast analysis method, which was adopted to detect residues of vancomycin and norvancomycin in milk, was implemented on a chromatographic system containing online solid-phase extraction (SPE) device that combined with high-resolution mass spectrometer (HRMS).

Method

First, the analytes were added to the blank milk sample were extracted with water [containing 0.1% trifluoroacetic acid (TFA)]–acetonitrile (ACN) (8:2, v/v), and then were purified and enriched on a C18-XL column, whereafter eluted from the purification column onto the analytical column (Shiseido Capcell Pak ADME column) for chromatographic separation prior to hybrid quadrupole–Orbitrap (Q-Orbitrap) detection.

Results

The results showed that the limit of detection (LOD) for each analyte and the limit of quantitation (LOQ) were 0.15  and 0.5 μg/kg, respectively. The correlation coefficient(s) of vancomycin and norvancomycin ranged from 0 to 200 ng/mL were greater than 0.9983.

Conclusions

These validations reflected that it was suitable for the established method to rapidly analyze vancomycin and norvancomycin residues in milk.

Highlights

The method for detecting vancomycin and norvancomycin residues in milk by online SPE combined with LC-HRMS. Online SPE technology realized automation, and the application of HRMS greatly improved the reliability of qualitative and quantitative analyses. The developed method is fast, simple, and reliable; each methodological index can meet requirements of trace analyses of vancomycin and norvancomycin in milk.

Evaluation of 4 quantification methods for monitoring 16 antibiotics and 1 beta-lactamase inhibitor in human serum by high-performance liquid chromatography with tandem mass spectrometry detection

Antibiotic (ATB) prescription in an intensive care unit (ICU) requires continuous monitoring of serum dosages due to the patient's pathophysiological condition. Dosing adjustment is necessary to achieve effective targeted concentrations. Since ICUs routinely use a large number of ATBs, global monitoring needs to be developed. In the present study, we developed a global analytical method for extracting, separating and quantifying the most widely used ATBs in ICUs: amoxicillin, piperacillin, cefazolin, cefepime, cefotaxime, ceftazidime, ceftolozane, ceftriaxone, ertapenem, meropenem, ciprofloxacin, moxifloxacin, levofloxacin, daptomycin, dalbavancin, linezolid and a beta-lactamase inhibitor: tazobactam. To guarantee the robustness of the quantification, we differentiated the 16 ATBs and the beta lactamase inhibitor into 4 pools (ATB1 to ATB4), taking into account prescription frequency in the ICU, the physicochemical properties and the calibration ranges of the ATBs selected. The whole ATB was then separated with two LC columns in reversed phase: Kinetex Polar-C18 100 Å and Polar-RP-80 synergy, in less than 6.5 min. Detection was carried out by electrospray in positive ion mode, by tandem mass spectrometry (LC-MS/MS. The four quantification methods were validated according to the European guidelines on bioanalytical method validation (EMEA guide), after determining the extraction yields, matrix effects, recovery, precision, accuracy, within-run precision and between-run precision. For all analyses, bias is < 15% and is comparable to the literature and LOQs vary from 0.05 mg.L^-1 for ciprofloxacin to 1.00 mg.L^-1 for ceftriaxone and dalbavancin. The stability time of cefepime and piperacillin is 3 hrs and for the other ATBs 6 hrs in serum at room temperature. For long-term stability, freezing at - 80 °C guarantees 3 months of stability for ceftriaxone and dalbavancin and more than 6 months for the other ATBs.

A novel sensitive analytical method for the simultaneous analysis of vancomycin and teicoplanin in human urine via single high-performance liquid chromatography coupled with photodiode array and mass spectrometry in series

Analysis of vancomycin and teicoplanin in biological fluids is vital since they are used in the treatment of hospital infections. For the determination of both glycopeptides in urine, a sensitive and accurate analytical method using high‐performance liquid chromatography coupled with photodiode array and mass spectrometry was developed and validated. This research work is the first attempt to develop a chromatographic method for the determination of two glycopeptides with structural similarities. Moreover, the used non‐invasive sampling method is an advantage of this research effort, especially when the blood sampling is difficult. Urine was treated with acetonitrile and 5% trichloroacetic acid, followed by solid‐phase extraction. The chromatographic separation was established at a C18 column (4.6 × 150 mm, 5 μm), using a gradient method and an electrospray ionization source in a positive mode. The linearity of the method was R²≥ 0.9900. The precision was estimated with a maximum coefficient of variation below 15%, while the accuracy ranged from 64 to 121%. The limit of detection and quantification of both glycopeptides ranged from 0.076 up to 0.33 mg/L and 0.33 up to 2.1 mg/L, respectively, showing the same sensitivity as the triple quadrupole mass spectrometry, which is the most frequently used method.

Therapeutic Drug Monitoring of Antibiotic Drugs: The Role of the Clinical Laboratory

BACKGROUND

Therapeutic drug monitoring (TDM) of anti-infective drugs is an increasingly complex field, given that in addition to the patient and drug as 2 usual determinants, its success is driven by the pathogen. Pharmacodynamics is related both to the patient (toxicity) and bacterium (efficacy or antibiotic susceptibility). The specifics of TDM of antimicrobial drugs stress the need for multidisciplinary knowledge and expertise, as in any other field. The role and the responsibility of the laboratory in this interplay are both central and multifaceted. This narrative review highlights the role of the clinical laboratory in the TDM process.

METHODS

A literature search was conducted in PubMed and Google Scholar, focusing on the past 5 years (studies published since 2016) to limit redundancy with previously published review articles. Furthermore, the references cited in identified publications of interest were screened for additional relevant studies and articles.

RESULTS

The authors addressed microbiological methods to determine antibiotic susceptibility, immunochemical and chromatographic methods to measure drug concentrations (primarily in blood samples), and endogenous clinical laboratory biomarkers to monitor treatment efficacy and toxicity. The advantages and disadvantages of these methods are critically discussed, along with existing gaps and future perspectives on strategies to provide clinicians with as reliable and useful results as possible.

CONCLUSIONS

Although interest in the field has been the driver for certain progress in analytical technology and quality in recent years, laboratory professionals and commercial providers persistently encounter numerous unresolved challenges. The main tasks that need tackling include broadly and continuously available, easily operated, and cost-effective tests that offer short turnaround times, combined with reliable and easy-to-interpret results. Various fields of research are currently addressing these features.

Quantitative Determination of Unbound Piperacillin and Imipenem in Biological Material from Critically Ill Using Thin-Film Microextraction-Liquid Chromatography-Mass Spectrometry

β-Lactam antibiotics are most commonly used in the critically ill, but their effective dosing is challenging and may result in sub-therapeutic concentrations that can lead to therapy failure and even promote antimicrobial resistance. In this study, we present the analytical tool enabling specific and sensitive determination of the sole biologically active fraction of piperacillin and imipenem in biological material from the critically ill. Thin-film microextraction sampling technique, followed by rapid liquid chromatography–tandem mass spectrometry (LC-MS/MS) analysis, was optimized and validated for the quantitative determination of antibiotics in blood and bronchoalveolar lavage (BAL) specimens collected from intensive care unit (ICU) patients suffering from ventilation-associated pneumonia (n = 18 and n = 9, respectively). The method was optimized and proved to meet the criteria of US Food and Drug Administration (FDA) guidelines for bioanalytical method validation. Highly selective, sensitive, accurate and precise analysis by means of thin-film microextraction–LC-MS/MS, which is not affected by matrix-related factors, was successfully applied in clinical settings, revealing poor penetration of piperacillin and imipenem from blood into BAL fluid (reflecting the site of bacterial infection), nonlinearity in antibiotic binding to plasma-proteins and drug-specific dependence on creatinine clearance. This work demonstrates that only a small fraction of biologically active antibiotics reach the site of infection, providing clinicians with a high-throughput analytical tool for future studies on personalized therapeutic drug monitoring when tailoring the dosing strategy to an individual patient.

Glycosyl imprinted mesoporous microspheres for the determination of glycopeptide antibiotics using ultra-high performance liquid chromatography coupled with tandem mass spectrometry

Glycopeptide antibiotics are critical weapons against serious Gram-positive resistant bacteria, and therefore the development of analytical methods for their determination is essential. In this work, with the aim of extending the scope of molecularly imprinted mesoporous materials to the recognition of large molecules such as proteins and peptides, we selected the glycosyl moiety of glycopeptide antibiotics as a template and synthesised a boronic acid functional monomer by click chemistry reaction to prepare glycosyl imprinted mesoporous microspheres. On the basis of boronate affinity, the template and the functional monomer formed a self-assembly structure that was incorporated into the silica framework during polymerisation. The removal of the glycosyl moiety created cavities with boronic acid groups covalently anchored to the pore walls of the glycosyl imprinted mesoporous microspheres. The resultant microspheres showed regular spherical shape, narrow size distribution and porous structure and exhibited high adsorption capability and fast adsorption kinetics. The size exclusion effect of the mesoporous structure prevents large molecules from entering the cavities, while the glycosyl imprinted cavities provide selectivity for glycopeptide antibiotics. The glycosyl imprinted mesoporous microspheres were employed to separate six glycopeptide antibiotics in serum samples, which were then determined using ultra-high performance liquid chromatography tandem mass spectrometry. The proposed method exhibited satisfactory linearity in the range of 0.1 to 20.0 μg/L, demonstrating great potential for the determination of glycopeptide antibiotics in serum samples.

An LC-MS/MS method for simultaneous analysis of the cystic fibrosis therapeutic drugs colistin, ivacaftor and ciprofloxacin

Inhaled antibiotics such as colistin and ciprofloxacin are increasingly used to treat bacterial lung infections in cystic fibrosis patients. In this study, we established and validated a new HPLC-MS/MS method that could simultaneously detect drug concentrations of ciprofloxacin, colistin and ivacaftor in rat plasma, human epithelial cell lysate, cell culture medium, and drug transport media. An aliquot of 200 μL drug-containing rat plasma or cell culture medium was treated with 600 μL of extraction solution (acetonitrile containing 0.1% formic acid and 0.2% trifluoroacetic acid (TFA)). The addition of 0.2% TFA helped to break the drug-protein bonds. Moreover, the addition of 0.1% formic acid to the transport medium and cell lysate samples could significantly improve the response and reproducibility. After vortexing and centrifuging, the sample components were analyzed by HPLC-MS/MS. The multiple reaction monitoring mode was used to detect the following transitions: 585.5-101.1 (colistin A), 578.5-101.1 (colistin B), 393.2-337.2 (ivacaftor), 332.2-314.2 (ciprofloxacin), 602.3-101.1 (polymyxin B1 as internal standard (IS)) and 595.4-101.1 (polymyxin B2 as IS). The running time of a single sample was only 6 min, making this a time-efficient method. Linear correlations were found for colistin A at 0.029-5.82 μg/mL, colistin B at 0.016-3.14 μg/mL, ivacaftor at 0.05-10.0 μg/mL, and ciprofloxacin at 0.043-8.58 μg/mL. Accuracy, precision, and stability of the method were within the acceptable range. This method would be highly useful for research on cytotoxicity, animal pharmacokinetics, and in vitro drug delivery.

AQbD-Oriented UHPLC/MS/MS Method Development for Glycopeptides Assessment in Pharmaceutical Forms

Vancomycin and teicoplanin are glycopeptide antibacterials that inhibit the bacteria cell wall synthesis showing activity against gram-positive bacteria. Development of the sensitive method is of great importance for quality control of these drugs that are fermentation products. Modification of the fermentation conditions could cause the differences in the relative amount of the total substance or component, as it is the case with teicoplanin. The main objective of this study was development of the sensitive and effective ultra high performance liquid chromatography - tandem mass sprectrometry (UHPLC-MS/MS) method for simultaneous quantification of vancomycin, all six subcomponents of teicoplanin, and its pharmacopoeial impurity A in pharmaceutical forms. The scientific-based Quality by Design approach was implemented in the MS and UHPLC method development. Detection and quantification of analytes were carried out in positive electrospray ion mode by multiple reaction monitoring. Capillary voltage, cone voltage and collision energy were optimized by implementing experimental design methodology and optimal values for each fragment ion were obtained by performing experiments according to 'Rechtschaffen' design matrix. An ACQUITY CSH Phenyl-hexyl (2.1 × 50 mm, particle size 1.7 μm) column was chosen for the separation under the gradient elution mode with the mobile phase consisted of 0.1% formic acid in water (mobile phase A) and acetonitrile (mobile phase B). Optimal gradient elution parameters were achieved by applying 'Rechtschaffen' design too. Method operable design regions were constructed for investigated MS and chromatographic parameters. The method was fully validated, and its applicability was confirmed throughout the ability to follow the behavior of vancomycin and teicoplanin under stress conditions.

An UHPLC-UV Method for the Determination of Vancomycin in Human Serum

Objective:

To develop a rapid ultra-performance liquid chromatographic (UHPLC)-UV method for vancomycin determination in human serum for therapeutic drug monitoring (TDM).

Methods:

Human serum samples were precipitated with 10% perchloric acid, and the supernatant after centrifugation was analyzed on an ACQUITY UHPLC BEH C18 column (2.1 × 50mm, 1.7 μm) via gradient elution with a flow rate at 0.3 mL/min. The mobile phase consisted of acetonitrile and 0.005M KH2PO4 buffer (containing 0.1% triethylamine, pH 3.4). The detection wavelength was set at 210 nm, and the column temperature was set at 40°C. The total runtime was 6.0 min per analysis.

Results:

After comprehensive validation, the method was applied to determine the concentration of vancomycin in human serum. The chromatographic peaks of vancomycin and internal standard were not interfered by endogenous matrices. The Retention Time (RT) of vancomycin was 1.91 min, while the internal standard was 1.58 min. The good linearity range of vancomycin concentration was 2.5-120 μg/mL (R2>0.999). The lower Limit of Quantitation (LLOQ) was 2.5 μg/mL. The precision at three Quality Control (QC) levels (including LLOQ) was restricted within 85-115%. The extraction recovery rate of QC samples (4.0, 20.0, and 60.0 μg/mL) were 101.16%, 97.70%, and 94.90%, respectively. Inter- and intra-day precision was less than 8% (RSD). Stability tests under different storage conditions were satisfactory. In patients, the concentration of vancomycin ranged from 7.30 to 89.12 μg/mL determined by the fully validated method.

Conclusion:

The rapid sample pre-treatment procedures and short analysis time made this UHPLC-UV method suitable for therapeutic drug monitoring (TDM) of vancomycin.

Quantification of Teicoplanin Using the HPLC-UV Method for Clinical Applications in Critically Ill Patients in Korea

A high-performance liquid chromatography-ultraviolet detector (HPLC-UV) method has been used to quantify teicoplanin concentrations in human plasma. However, the limited analytical accuracy of previously bioanalytical methods for teicoplanin has given rise to uncertainty due to the use of an external standard. In this study, an internal standard (IS), polymyxin B, was applied to devise a precise, accurate, and feasible HPLC-UV method. The deproteinized plasma sample containing teicoplanin and an IS of acetonitrile was chromatographed on a C18 column with an acidic mobile phase consisting of NaH₂PO₄ buffer and acetonitrile (78:22, v/v) by isocratic elution and detection at 220 nm. The linearity was in the range 7.8–500 mg/L calculated by the ratio of the teicoplanin signal to the IS signal. This analytical method, validated by FDA guidelines with ICH Q2 (R1), was successfully applied to analyze the plasma samples of patients in the intensive care unit for treating serious resistant bacterial infectious diseases, such as those by methicillin-resistant Staphylococcus aureus and Enterococcus faecalis. The methods suggested the potential for use in routine clinical practice for therapeutic drug monitoring of teicoplanin, providing both improved accuracy and a wide range of linearity from lower than steady-state trough concentrations (10 mg/L) to much higher concentrations.

Impact on Antibiotic Resistance, Therapeutic Success, and Control of Side Effects in Therapeutic Drug Monitoring (TDM) of Daptomycin: A Scoping Review

Antimicrobial resistance (AR) is a problem that threatens the search for adequate safe and effective antibiotic therapy against multi-resistant bacteria like methicillin-resistant Staphylococcus aureus (MRSA), and vancomycin-resistant Enterococci (VRE) and Clostridium difficile, among others. Daptomycin is the treatment of choice for some infections caused by Gram-positive bacteria, indicated most of the time in patients with special clinical conditions where its high pharmacokinetic variability (PK) does not allow adequate plasma concentrations to be reached. The objective of this review is to describe the data available about the type of therapeutic drug monitoring (TDM) method used and described so far in hospitalized patients with daptomycin and to describe its impact on therapeutic success, suppression of bacterial resistance, and control of side effects. The need to create worldwide strategies for the appropriate use of antibiotics is clear, and one of these is the performance of therapeutic drug monitoring (TDM). TDM helps to achieve a dose adjustment and obtain a favorable clinical outcome for patients by measuring plasma concentrations of an administered drug, making a rational interpretation guided by a predefined concentration range, and, thus, adjusting dosages individually.

Reliability of LipidSearch software identification and its application to assess the effect of dry salting on the long-chain free fatty acid profile of tilapia muscles

Dry salting has important effects on food lipids. In this work, the reliability of LipidSearch software identification and its application to assess the effect of dry salting on the long-chain free fatty acid profile of tilapia muscles were studied by ultra-high-performance liquid chromatography-Q-Extractive Orbitrap mass spectrometry and LipidSearch software. Compared with the standard reference identification method, the LipidSearch software identification method was suggested to be a reliable identification method for long-chain free fatty acid identification. During the dry salting process, tilapia muscles with low muscle-to-salt mass ratios of 3-8 might have stable and similar free fatty acid profile changes, and the free fatty acid amounts decreased and then increased with time. This work could provide useful information to evaluate the development and application of LipidSearch software as well as a way to analyze the effect of dry salting on the free fatty acids change of aquatic products.

A systematic review on chromatography-based method validation for quantification of vancomycin in biological matrices

A fully validated bioanalytical methods are prerequisite for pharmacokinetic and bioequivalence studies as well as for therapeutic drug monitoring. Due to high pharmacokinetic variability and narrow therapeutic index, vancomycin requires reliable quantification methods for therapeutic drug monitoring. To identify published chromatographic based bioanalytical methods for vancomycin in current systematic review, PubMed and ScienceDirect databases were searched. The selected records were evaluated against the method validation criteria derived from international guidelines for critical assessment. The major deficiencies were identified in method validation parameters specifically for accuracy, precision and number of calibration and validation standards, which compromised the reliability of the validated bioanalytical methods. The systematic review enacts to adapt the recommended international guidelines for suggested validation parameters to make bioanalysis reliable.

High-throughput and wide-range simultaneous determination of linezolid, daptomycin and tedizolid in human plasma using ultra-performance liquid chromatography coupled to tandem mass spectrometry

Several recent studies on pharmacokinetics of linezolid (LZD) and daptomycin (DAP) reported that plasma concentration was linked to efficacy and adverse effects, suggesting the usefulness of therapeutic drug monitoring (TDM). The usefulness of TDM for tedizolid (TZD) has not been reported, but a previous report showed individual differences in area under the curve depending on body weight. In intensive care unit (ICU) patients, pharmacokinetics was reported to fluctuate due to various factors. Here, we developed a high-throughput and wide-range simultaneous quantification method for LZD, DAP and TZD in human plasma using ultra-performance liquid chromatography coupled to tandem mass spectrometry (UPLC-MS/MS). Plasma samples were pretreated by solid-phase extraction using Oasis® HLB μElution Plate. The assay fulfilled the requirements of US Food and Drug Administration and the European Medicines Agency for bioanalytical method validation. The assay for LZD, DAP and TZD showed good linearity over wide ranges of 100-100000, 150-150000 and 5-5000 ng/mL, respectively. Within-batch accuracy and precision as well as batch-to-batch accuracy and precision for all three drugs fulfilled the criteria of the above guidance. Extraction recovery rates were more than 92.2 % for LZD, 44.7 % for DAP, and 84.8 % for TZD. Matrix effect showed no remarkable differences among low, medium and high quality control samples for the three drugs. The maximum and trough concentrations of three patients each who received LZD, DAP or TZD in ICU were measured by the novel UPLC-MS/MS method. In all patients, the measured concentrations were within the ranges of the calibration curves, demonstrating the feasibility of clinical application of the novel method. In conclusion, we have succeeded to develop the first method for simultaneous quantification of plasma concentrations of LZD, DAP and TZD.

Toxicity Profile and Pharmacokinetic Study of Antibiotic Mixtures, Gentamicin and Vancomycin, in Rat Plasma by Ecofriendly Liquid Chromatography Coupled Tandem Mass Spectrometry

The global burden of bacterial infection and antimicrobial resistance increases the demand to associate more than one antibiotic to fight life-threatening bacteria. Therefore, there is a great necessity to develop simple and sensitive methods for routine analysis of clinical samples. Therapeutic drug monitoring, bioequivalence, and pharmacokinetic studies are essential to ensure drug efficiency and safety. Herein, therefore, the first ecofriendly liquid chromatography -tandem mass spectrometry (LC-MS/MS) method was developed and fully validated for simultaneous determination of a commonly combined antibiotic for methicillin-resistant Staphylococcus aureus (MRSA), vancomycin (VCM) and gentamicin (GTM), in rat plasma after parenteral administration. VCM and GTM were extracted from plasma sample using acetonitrile (ACN)/0.1% TFA-induced protein precipitation followed by the separation on an Agilent Eclipse Plus ODS (3 mm × 100 mm, 3.5 μm) column using water-enriched mobile phase consisting of water containing 0.1% THF/ACN (85:15, v/v%) at flow rates of 0.30 mL min^-1. The mass spectrometry parameters were optimized, and multiple reaction monitoring (MRM) in positive ion mode of two transitions was utilized for quantification of precursor to product ion at m/z 725.5 → 144 and 100.1 for VCM as [M + 2H]²⁺, 478.3 → 322.2 and 156.9 for GTM, and 586.3 → 162.9 and 425.3 for amikacin (AMK) internal standard, as [M + H]⁺. The current method has been validated as per U.S. FDA bioanalytical guidelines in terms of linearity, accuracy, precision, selectivity, recovery, matrix effects, and stability. The method was linear in the range of 1-2000 ng mL^-1 and 1-1000 ng mL^-1 with detection limits (S/N of 3) of 0.18 and 0.09 ng mL^-1 for VCM and GTM, respectively. The selectivity and high sensitivity allow the current method to succeed in the study of pharmacokinetic parameters and drug-drug interaction between VCM and GTM after single-dose administration. VCM increased plasma clearance and elimination rate constant of GTM when coadministered and GTM also too. The change of serum chemistry analysis and significant elevation of creatinine and BUN indicate an alteration in kidney function in group III in those given the combined antibiotics. Our finding illustrated the nephrotoxicity of the two drugs when associated. The ecofriendly, simplicity, and rapidity of the current study made it a promising method for high-throughput biomonitoring in clinical samples.

A whole blood microsampling assay for vancomycin: development, validation and application for pediatric clinical study

Background: Vancomycin is a commonly used antibiotic, which requires therapeutic drug monitoring to ensure optimal treatment. Microsampling assays are attractive tools for pediatric clinical research and therapeutic drug monitoring. Results: A LC-MS/MS method for the quantification of vancomycin in human whole blood employing volumetric absorptive microsampling (VAMS^®) devices (20 μl) was developed and validated. Vancomycin was stable in human whole blood VAMS under assay conditions. Stability for vancomycin was established for at least 160 days as dried microsamples at -78°C. Conclusion: This method is currently being utilized for the quantitation of vancomycin in whole blood VAMS for an ongoing pediatric clinical study and representative clinical data are reported.

Validation and clinical application of a multiplex high performance liquid chromatography - tandem mass spectrometry assay for the monitoring of plasma concentrations of 12 antibiotics in patients with severe bacterial infections

OBJECTIVE

Unpredictable pharmacokinetics of antibiotics in patients with life-threatening bacterial infections is associated with drug under- or overdosing. Therapeutic drug monitoring (TDM) may guide dosing adjustment aimed at maximizing antibacterial efficacy and minimizing toxicity. Rapid and accurate analytical methods are key for real-time TDM. Our objective was to develop a robust high-performance liquid chromatography-tandem mass spectrometry method (HPLC-MS/MS) for multiplex quantification of plasma concentrations of 12 antibiotics: imipenem/cilastatin, meropenem, ertapenem, cefepime, ceftazidime, ceftriaxone, piperacillin/tazobactam, amoxicillin, flucloxacillin, rifampicin, daptomycin.

METHODS

A single extraction procedure consisting in methanol plasma protein precipitation and H₂O dilution was used for all analytes. After chromatographic separation on an Acquity UPLC HSS-T3 2.1 × 50 mm, 1.8 µm (Waters®) column, quantification was performed by electro-spray ionisation-triple quadrupole mass spectrometry with selected reaction monitoring detection. Antibiotics were divided in two pools of calibration according to the frequency of analyses requests in the hospital routine antibiotic TDM program. Stable isotopically-labelled analogues were used as internal standards. A single analytical run lasted less than 9 min.

RESULTS

The method was validated based on FDA recommendations, including assessment of extraction yield (96-113.8%), matrix effects, and analytical recovery (86.3-99.6%). The method was sensitive (lower limits of quantification 0.02-0.5 µg/mL), accurate (intra/inter-assay bias -11.3 to +12.7%) and precise (intra/inter-assay CVs 2.1-11.5%) over the clinically relevant plasma concentration ranges (upper limits of quantification 20-160 µg/mL). The application of the TDM assay was illustrated with clinical cases that highlight the impact on patients' management of an analytical assay providing information with short turn-around time on antibiotic plasma concentration.

CONCLUSION

This simple, robust high-throughput multiplex HPLC-MS/MS assay for simultaneous quantification of plasma concentrations of 12 daily used antibiotics is optimally suited for clinically efficient real-time TDM.

Synthesis of Molecularly Imprinted Polymers for the Selective Extraction of Polymyxins from Environmental Water Samples

The emergence of colistin resistance gen has aroused public concern. It is significant to assess the concentrations of polymyxins residues in aquatic environment since resistant bacteria carrying colistin resistance gen are frequently isolated from wastewater; surface water and ground water. However; no literature on the determination of polymyxins in water is available; probably due to the absence of an efficient extraction method. Accordingly; molecularly imprinted polymers were synthesized by precipitation polymerization with colistin as the template. The polymers were successfully used as sorbents for the determination of polymyxins from water based on molecularly imprinted solid-phase extraction and high-performance liquid chromatography-ultraviolet detection. The molecularly imprinted cartridge showed excellent affinity and cross-reactivity to analytes in aqueous media. Recoveries obtained from water samples were between 65.9% and 90.1%, with relative standard deviations lower than 10.2%. Limits of detection were between 1.0 and 2.0 μg L^-1 concentration levels. Compared with C₁₈ cartridge; the molecularly imprinted cartridge could remove more interference from co-extracted matrices. This method is practical for the routine monitoring of polymyxin residues in environmental water; which will benefit studies on drug-resistance and occurrence of polymyxins in the environment.

Therapeutic drug monitoring of the teicoplanin trough level after the loading doses in patients receiving venoarterial extracorporeal membrane oxygenation

BACKGROUND

The optimal loading dose of teicoplanin in patients receiving venoarterial extracorporeal membrane oxygenation (VA-ECMO) has never been determined by therapeutic drug monitoring. This study investigated the appropriateness of proposed loading dose regimens of teicoplanin when administered to patients receiving VA-ECMO by using a previously proposed loading dosage and measuring the teicoplanin trough concentration (C_trough).

METHODS

Patients who initiated teicoplanin therapy while receiving VA-ECMO were enrolled. Every included patient received four loading doses of teicoplanin at a dose of 12 mg/kg. The first three doses were administered 12 h apart, and the fourth dose was administered 24 h after the third dose. Blood samples were collected before administering the maintenance dose (i.e., the fifth dose), and the teicoplanin C_trough was measured. Serum teicoplanin levels were determined using an Agilent 1290 ultra-high performance liquid chromatography system.

RESULTS

The teicoplanin C_trough was successfully tested in 11 patients. Their median age was 68.2 years, and 81.8% of them were men. The median of each loading dose was 11.6 (range, 10.7-12.8) mg/kg. The median teicoplanin C_trough was 22.01 (range, 14.85-44.84) mg/L. All patients had a C_trough of more than 10 mg/L, whereas 90.9% (10/11) of the patients achieved a C_trough of more than 15 mg/L.

CONCLUSION

The loading dosage consisting of four doses of teicoplanin administered within the first 72 h at a dose of 12 mg/kg/dose could achieve an adequate therapeutic C_trough of teicoplanin in patients receiving VA-ECMO.

LC-MS/MS method for simultaneous determination of linezolid, meropenem, piperacillin and teicoplanin in human plasma samples

Antibiotic therapy is a crucial aspect of the management of hospitalized patients, however, current standard dosing protocols have been shown to often attain inadequate plasmatic concentrations which may impair the clinical outcome and promote the selection of multidrug-resistant bacteria. The aim of this study is to establish and validate a robust and fast liquid chromatography-tandem mass spectrometry (LC-MS/MS) method for the simultaneous analysis of four commonly used antibiotics (Meropenem, Piperacillin, Linezolid and Teicoplanin) in human plasma according to the European Medicines Agency (EMA) guidelines. Samples preparation was performed using a commercially available extraction kit which needs a very small amount of sample (50 μl). Antibiotics were detected, following a 7 min gradient separation, in multiple reactions monitoring (MRM) mode using a Qtrap 5500 triple quadrupole instrument equipped with an electrospray source operating in positive ion mode. The method, covering the antibiotics' clinically relevant concentration ranges, is also able to quantify, individually, the major teicoplanin components. The high reproducibility and the need of a small amount of sample, associated with the use of a commercial kit, together with a short chromatographic time, makes the method particularly suited for high-throughput routine analysis. Monitoring of plasma antibiotic levels, as part of the clinical routine, would result in a quick therapy adjustment leading to a higher probability of eradicating the infection as well as a potential reduction of multidrug-resistance prevalence. The method was successfully applied to monitor the antibiotic concentration of 49 patients under therapy.

Therapeutic drug monitoring of teicoplanin using an LC-MS/MS method: Analysis of 421 measurements in a naturalistic clinical setting

Teicoplanin is a glycopeptide antibiotic used for treatment of severe Gram-positive bacterial infection. The aim of this study was to develop and validate a liquid chromatography-tandem mass spectrometry (LC-MS/MS) method for therapeutic drug monitoring (TDM) of teicoplanin and to review our clinical experience. We established an LC-MS/MS method to analyze serum concentration of teicoplanin using simple protein precipitation with a 5 min run time for each sample. The linearity, lower limit of quantitation, detection accuracy, precision, carryover, matrix effect, and extraction recovery were evaluated. From September 2014 to June 2017, a total of 421 serum teicoplanin concentrations was measured in 223 patients. We collected demographic and clinical data, medication history, and laboratory findings through retrospective review of medical records. The LC-MS/MS method was linear for serum teicoplanin concentrations in the range of 12.0-89.0 μg/mL. The intra- and inter-assay precisions were below CV 7.5%. The accuracy was less than ±10% bias. The lower limit of quantification was 0.2 μg/mL. The extraction recovery ranged from 88.8% to 96.6%. Of 421 measurements, 87 (20.7%) were subtherapeutic (< 10 μg/mL), and four (0.9%) were above the toxic threshold (≥ 60 μg/mL). Serum teicoplanin concentration was measured once in 140 patients (63%), and multiple measurements were completed for the others (83 patients, 37%). Intra-patient variability in teicoplanin concentration was found (CV 33%, range 2-94%). Our simple and rapid LC-MS/MS method was successfully applied in TDM of teicoplanin in clinical practice. Such TDM of teicoplanin may be useful for individualized dose adjustment.

Measurement of Teicoplanin Concentration With Liquid Chromatography-Tandem Mass Spectrometry Method Demonstrates the Usefulness of Therapeutic Drug Monitoring in Hematologic Patient Populations

BACKGROUND

Teicoplanin is a glycopeptide antibiotic that has become increasingly popular with the spread of methicillin-resistant Staphylococcus aureus. The aim of the study was to develop and validate an ultra-high performance liquid chromatography-tandem mass spectrometry (UHPLC-MS/MS) method for teicoplanin, and analyze trough teicoplanin concentrations achieved in patients with hematological diseases.

METHODS

The UHPLC-MS/MS method for teicoplanin was developed, validated, and applied in a retrospective analysis of trough plasma teicoplanin concentrations from 305 patients receiving standard dose, and 17 patients receiving therapeutic drug monitoring (TDM)-guided individualized dose.

RESULTS

The linear range was 3.9-52.9 mg/L. The imprecision was less than 12%, the limits of detection and quantification were less than 0.13 and 0.72 mg/L, respectively. The sample carry-over and ion suppression were insignificant. In the standard dose group, the median teicoplanin concentrations were 7.5 mg/L (days 3-5) and 8.9 mg/L (on days 6-8); and the proportion of trough levels achieving ≥10 mg/L was 20% (days 3-5) and 38% (days 6-8), respectively. In the TDM-guided individualized dose group, median teicoplanin concentration was higher (16.9 mg/L), and the proportion of trough levels ≥10 mg/L was also higher (77%) when compared with the standard dose group.

CONCLUSIONS

Based on these results, the present UHPLC-MS/MS method can be considered suitable for routine TDM of teicoplanin. Also, based on the insufficient trough teicoplanin concentrations achieved with standard dose regimen, and the higher trough teicoplanin concentrations achieved with TDM-guided individualized dose regimen, this study highlights the importance of TDM of teicoplanin, especially in high-risk patient groups.

Development and validation of sensitive and selective quantification of total and free daptomycin in human plasma using ultra-performance liquid chromatography coupled to tandem mass spectrometry

Recently, several studies on pharmacokinetics parameters of daptomycin reported that plasma trough concentration was linked to efficacy and adverse effects, suggesting the usefulness of therapeutic drug monitoring. Although some methods for determining total daptomycin concentration using liquid chromatography coupled to tandem mass spectrometry were established previously, no sensitive quantification method for free drug concentration was established. In this study, we aimed to develop a quantitative method of measuring both total and free daptomycin concentrations using ultra-performance liquid chromatography coupled to tandem mass spectrometry (UPLC-MS/MS), by which both trough and maximum concentrations can be measured. Plasma samples were prepared by solid phase extraction. Free fractions were obtained by ultrafiltration. The assay fulfilled the requirements of US Food and Drug Administration and the European Medicines Agency for assay validation. The methods for total and free drug showed good fit over wide ranges of 0.5-200 and 0.04-40 μg/mL, with lower limits of quantitation of 0.5 and 0.04 μg/mL, respectively. Recovery rate of free daptomycin from ultrafiltration was approximately 100%. Extraction recovery rates of total and free drug measurements ranged from 57.1 to 67.4% and 54.6 to 62.3%, while matrix effect varied between 111.9 and 118.7% and 104.0 and 127.1%, respectively. The maximum and trough concentrations of total and free daptomycin in plasma from two patients in intensive care unit were successfully determined, demonstrating the feasibility of clinical application of the novel methods for determining plasma total and free daptomycin concentrations. In conclusion, we succeeded to develop a sensitive and selective method using UPLC-MS/MS for quantitative measurement of total and free daptomycin concentrations in plasma.

Analytical Quality by Design-based development and validation of ultra pressure liquid chromatography/MS/MS method for glycopeptide antibiotics determination in human plasma

Aim: An ultra pressure liquid chromatography (UPLC)/MS/MS method for vancomycin and teicoplanin determination in human plasma was developed in accordance with analytical quality by design (AQbD) concept and fully validated. Materials & methods: Chromatographic separation was performed on ACQUITY UPLC C18 charge surface hybrid (CSH) column (2.1 mm × 50 mm, 1.7 μm particle size) in gradient mode and the mobile phase consisted of 0.1% formic acid in water and pure acetonitrile. The experimental design methodology was used for the definition of optimal chromatographic and protein precipitation conditions. Results: The linearity ranges were 0.05–10 μg ml-1 for vancomycin and 0.5–200 μg ml-1 for total teicoplanin. The relative standard deviations for precision estimation were below 15% and the accuracy was within 85–115% for all quality control levels. Conclusion: The method was utilized for glycopeptide antibiotics bioanalysis.