A novel fluorescence assay for the detection of hemoglobin based on the G-quadruplex/hemin complex

Supramolecular assembly-induced electrochemiluminescence enhancement of gold nanoclusters for hemoglobin detection

Gold nanoclusters (Au NCs) with excellent optical properties and biocompatibility have become one of the most promising electrochemiluminescence (ECL) emitters. However, the low efficiency and poor stability of Au NCs restrict their applications in ECL. Herein, by supramolecular assembly of L-arginine (Arg) and 4-hydroxy-2-mercapto-6-methylpyrimidine (MTU) on the surface of Au NCs, Arg/MTU-Au NCs with enhanced ECL efficiency and stability were prepared. Compared with the MTU-stabilized Au NCs (MTU-Au NCs), the ECL efficiency of Arg/MTU-Au NCs increased by 24.8 times. As a proof-of-concept, a sensitive biosensing platform was constructed for sensitive detection of hemoglobin (Hb) in urine using Arg/MTU-Au NCs as ECL emitters. The proposed ECL detection platform provides a feasible strategy for the detection of biomarkers in urine and has broad application prospects in disease screening and clinical marker detection.

In-situ synthesis of ionic liquid-based-carbon quantum dots as fluorescence probe for hemoglobin detection

Carbon quantum dots (CQDs) have emerged as a potential fluorescent probe in bio/analytical chemistry in the present decade. The optical characteristics of CQDs may be tuned by their functional groups, which can also be used to selectively produce stable bonds with target molecules. Along with them, ionic liquids (ILs) are now demonstrating their important relevance in the field of pharmaceuticals for the creation of potent therapeutics. In the article, we have discussed the use of high fluorescent ILs-decorated-CQDs (CQDs-IM@OTf) as a straightforward and quick-acting fluorescence probe for sensitive and precise hemoglobin (Hb) determination with minimum detectability of 6.7 nM. The proposed mechanism behind this involves static mode of quenching which leads to the formation of a ground state complex [CQDs-IM@OTf-Hb complex] between the Hb protein and the drug. Despite the fact that Hb can quench the fluorescence of CQDs due to the inner filter effect (IFE) of the protein, which effects both the excitation and emission spectra of the CQDs, the addition of H₂O₂ improved the sensitivity of Hb detection. The present assay predicated on Hb interaction with H₂O₂, which produces reactive oxygen species such as hydroxyl (OH^.) and superoxide (O₂^.-) radicals under heme degradation and/or iron release from Hb. The subsequent reaction of hydroxyl radicals with CQDs, which acts as a strong oxidising agent, causes a high fluorescence quenching. The designed fluorescence probe was used to measure Hb in the concentration range of 3-90 nM with a precise detection limit of 0.33 nM. The quantification of hemoglobin (Hb) in diluted human blood samples is done using this observation.

Design of Ultra-Narrow Band Graphene Refractive Index Sensor

The paper proposes an ultra-narrow band graphene refractive index sensor, consisting of a patterned graphene layer on the top, a dielectric layer of SiO₂ in the middle, and a bottom Au layer. The absorption sensor achieves the absorption efficiency of 99.41% and 99.22% at 5.664 THz and 8.062 THz, with the absorption bandwidths 0.0171 THz and 0.0152 THz, respectively. Compared with noble metal absorbers, our graphene absorber can achieve tunability by adjusting the Fermi level and relaxation time of the graphene layer with the geometry of the absorber unchanged, which greatly saves the manufacturing cost. The results show that the sensor has the properties of polarization-independence and large-angle insensitivity due to the symmetric structure. In addition, the practical application of testing the content of hemoglobin biomolecules was conducted, the frequency of first resonance mode shows a shift of 0.017 THz, and the second resonance mode has a shift of 0.016 THz, demonstrating the good frequency sensitivity of our sensor. The S (sensitivities) of the sensor were calculated at 875 GHz/RIU and 775 GHz/RIU, and quality factors FOM (Figure of Merit) are 26.51 and 18.90, respectively; and the minimum limit of detection is 0.04. By comparing with previous similar sensors, our sensor has better sensing performance, which can be applied to photon detection in the terahertz band, biochemical sensing, and other fields.

Carbon dots and Methylene blue facilitated photometric quantification of Hemoglobin

Early detection and monitoring of any abnormality of Hemoglobin (Hb) concentration in whole blood samples are important as this may be related to anemia, leukemia, dengue, etc. To facilitate quantitative detection and to monitor the hemoglobin level in the blood, we attempt to develop a low-cost, portable point of care (POC) device based on the spectrophotometric principle. Optical sensitivities of carbon quantum dots (CDs) are found to be highly responsive, while there is a selective reaction between Hb and reduced form of Methylene Blue (MB_red). The interaction of Hb, MB_red, and CDs is delineated using UV-Visible (UV-Vis) spectroscopy. CDs have a characteristic UV-Vis peak at ∼ 347 nm, and it shows a gradual increase in intensity with a slight red shift (∼355 nm) on the progressive increase in Hb concentration. Simultaneously, the colorless MB_red is oxidized to its blue oxidized form MB_ox and its characteristic peak starts reappearing at ∼ 663 nm. These responses are exploited to quantify Hb concentration with a limit of detection (LOD) as low as ∼ 2 g dL^-1 in a developed POC device, and the results are validated with the clinical data obtained from a local hospital with reasonably good agreement. This photometric detection approach can be adopted for other quantitative biosensors.

An aptasensor for the detection of Pb2+ based on photoinduced electron transfer between a G-quadruplex-hemin complex and a fluorophore

Due to the threat to health of heavy metal contamination, simple and rapid detection methods for heavy metals are an urgent needed in environment protection and food safety. In this work, we have developed a fluorescent aptasensor for the 'turn-off' model detection of Pb²⁺ . The key feature of the aptasensor is that the dye-labelled nucleic acid strand can be folded into a G-quadruplex structure in the presence of Pb²⁺ . This conformational change induces photoinduced electron transfer (PET) between a G-quadruplex-hemin complex and 6-carboxyrhodamine X (ROX), which results in fluorescence quenching of ROX. We systematically investigated the interaction mechanism between Pb²⁺ and the aptasensor and the effects of several environmental parameters were also studied. Under the optimum conditions, the proposed method exhibited a good liner relationship between the concentration of Pb²⁺ and fluorescence quenching efficiency in the range 25-500 nM and the limit of detection was 1.02 nM. In addition, this method also manifested good performance in spiked lettuce samples with satisfactory recoveries of 87.10-109.6%. This target-induced PET platform can be further expanded to other heavy metal analysis.

Biocatalytically Initiated Precipitation Atom Transfer Radical Polymerization (ATRP) as a Quantitative Method for Hemoglobin Detection in Biological Fluids

The hemoglobin content of blood is an important health indicator, and the presence of microscopic amounts of hemoglobin in places where it normally does not occur, e.g. in blood plasma or in urine, is a sign of diseases such as hemolytic anemia or urinary tract infections. Thus, methods to detect and quantify hemoglobin are important for clinical laboratories, blood banks, and for point-of-care diagnostics. The precipitation polymerization of N-isopropylacrylamide by hemoglobin-catalyzed atom transfer radical polymerization (ATRP) is used as an assay for hemoglobin quantification relying on the formation of turbidity as a simple optical read-out. Dose-response curves for pure hemoglobin and for hemoglobin in blood plasma, in urine, in erythrocytes, and in full blood are obtained. Turbidity formation increases with the concentration of hemoglobin. Concentrations of hemoglobin as low as 6.45 × 10^-3 mg mL^-1 in solution, 4.88 × 10^-1 mg mL^-1 in plasma, and 1.65 × 10^-1 mg mL^-1 in urine could be detected, which is below the clinically relevant concentrations in the respective body fluids. Total hemoglobin in full blood is also accurately determined. The reaction can be regarded as a polymerization-based signal amplification for the sensing of hemoglobin, as the analyte catalyzes the formation of radicals which add many monomer units into detectable polymer chains. While most established hemoglobin tests involve the use of highly toxic reagents such as potassium cyanide, the polymerization-based test uses simple and stable organic reagents. Thus, it is an environmentally friendlier alternative to established chemical assays for hemoglobin.

Facile detection of melamine by a FAM-aptamer-G-quadruplex construct

The development of a novel method for melamine detection that uses a FAM-aptamer-G-quadruplex construct due to the efficient quenching ability of an aptamer-linked G-quadruplex is reported herein. The construct, which is labeled with the fluorescent dye 6-carboxyfluorescein (FAM), consists of two parts: a melamine-binding aptamer and a G-rich sequence that can form a G-quadruplex structure. Because of the specific recognition of melamine by the T-rich aptamer, this aptamer folds into a hairpin structure in the presence of melamine, which draws the G-quadruplex closer to the FAM fluorophore, leading to the quenching of the fluorescence of FAM. Thus, a highly sensitive and selective fluorescence strategy for assaying melamine was established. Under optimal conditions, the fluorescence quenching is proportional to the concentration of melamine within the range 10-90 nM, and the method has a detection limit of 6.32 nM. Further application of the method to plastic cup samples suggested that it permitted recoveries of between 97.15% ± 1.02 and 101.92% ± 2.07. The detected amounts of melamine spiked into the plastic cup samples and the corresponding amounts measured by HPLC were in good accordance, indicating that this fluorescent method is reliable and practical. Owing to its high sensitivity, excellent selectivity, and convenient procedure, this strategy represents a promising alternative method of melamine screening. Graphical abstract.

Synchronous fluorescence spectroscopy for detecting blood meal and blood products

Fluorescence spectroscopy is a powerful method for protein analysis. Its sensitivity and selectivity allow its use for the detection of blood meal and blood products. This study proposes a novel approach for the detection of hemoglobin in animal feed by synchronous fluorescence spectroscopy (SFS). The objective was to develop a fast and easy method to detect hemoglobin powder and blood meal. Analyses were carried out on standard reference material (hemoglobin and albumin) in order to optimize SFS method conditions for hemoglobin detection. The method was then applied to protein extracts of commercial feed material and compound feed. The results showed that SFS spectra of blood meal and blood products (hemoglobin powder and plasma powder) could be used to characterize hemoglobin. Principal component analysis (PCA) applied to area-normalized SFS spectra of artificially adulterated samples made it possible to define a limit of detection of hemoglobin powder or blood meal of 0.5-1% depending on the feed material. The projection in the PCA graphs of SFS spectra of real commercial compound feeds known to contain or to be free from blood-derived products showed that it was possible to discriminate samples according to the presence of hemoglobin. These results confirmed that SFS is a promising screening method for the detection of hemoglobin in animal feed.

Inner filter with carbon quantum dots: A selective sensing platform for detection of hematin in human red cells

Hematin plays a crucial role in various physiological functions, and the determination of hematin in complex biological matrixes is a significant but difficult issue. Considering the unique photophysical/photochemical properties of carbon quantum dots (CQDs) prepared with p-aminobenzoic acid (PABA) and ethanol, a new strategy for the design of fluorescent probes for hematin has been achieved. The proposed sensor array is fabricated based on the inner filter effect (IFE) between hematin and CQDs with phenomenon of selective fluorescence quenching of CQDs which results from the strong absorption of the excitation and emission spectrum of CQDs by hematin. The fluorescence quenching of CQDs is closely related to the amount of hematin and there is a good linear relationship over the range of 0.5-10μM with a detection limit of 0.25μM. What's more, the fluorescence assay has been successfully applied for hematin sensing in healthy human red cells showing this sensing assay has a great potential prospect for detection of hematin in the complex matrixes.

G-quadruplex DNAzymes-induced highly selective and sensitive colorimetric sensing of free heme in rat brain

Direct selective determination of free heme in the cerebral system is of great significance due to the crucial roles of free heme in physiological and pathological processes. In this work, a G-quadruplex DNAzymes-induced highly sensitive and selective colorimetric sensing of free heme in rat brain is established. Initially, the conformation of an 18-base G-rich DNA sequence, PS2.M (5'-GTGGGTAGGGCGGGTTGG-3'), in the presence of K(+), changes from a random coil to a "parallel" G-quadruplex structure, which can bind free heme in the cerebral system with high affinity through π-π stacking. The resulted heme/G-quadruplex complex exhibits high peroxidase-like activity, which can be used to catalyze the oxidation of colorless ABTS(2-) to green ABTS˙(-) by H2O2. The concentration of heme can be evaluated by the naked eye and determined by UV-vis spectroscopy. The signal output showed a linear relationship for heme within the concentration range from 1 to 120 nM with a detection limit of 0.637 nM. The assay demonstrated here was highly selective and free from the interference of physiologically important species such as dopamine (DA), 3,4-dihydroxyphenylacetic acid (DOPAC), ascorbate acid (AA), cysteine, uric acid (UA), glucose and lactate in the cerebral system. The basal dialysate level of free heme in the microdialysate from the striatum of adult male Sprague-Dawley rats was determined to be 32.8 ± 19.5 nM (n = 3). The analytic protocol possesses many advantages, including theoretical simplicity, low-cost technical and instrumental demands, and responsible detection of heme in rat brain microdialysate.