One-step enrichment and chemiluminescence detection of sodium dodecyl benzene sulfonate in river water using Mg–Al–carbonate layered double hydroxides

Boron-doped reduced graphene oxide as an efficient cathode in microbial fuel cells for biological toxicity detection

Electrodes with superior stability and sensitivity are highly desirable in advancing the toxicity detection efficiency of microbial fuel cells (MFCs). Herein, boron-doped reduced graphene oxide (B-rGO) was synthesized and utilized as an efficient cathode candidate in an MFCs system for sensitive sodium dodecylbenzene sulfonate (SDBS) detection. Boron doping introduces additional defects and improves the dispersibility and oxygen permeability, thereby enhancing the oxygen reduction reaction (ORR) efficiency. The B-rGO-based cathode has demonstrated significantly improved output voltage and power density, marking improvements of 75 % and 58 % over their undoped counterparts, respectively. Furthermore, it also exhibited remarkable linear sensitivity to SDBS concentrations across a broad range (0.2-15 mg/L). Notably, the cathode maintained excellent stability within the test range and showed significant reversibility for SDBS concentrations between 0.2 and 3 mg/L. The highly sensitive and stable B-rGO-based cathode is inspiring for developing more practical and cost-effective toxicant sensing devices.

Fluorescent and visual sensing of sodium dodecylbenzene sulfonate with an aminosilane self-condensation promoting and electrostatic attraction effect-based ratiometric probe

BACKGROUND

Increasing attention has been paid to sodium dodecylbenzene sulfonate (SDBS) detection because it could cause damage to human body and environmental water. For example, SDBS must not be detected on tableware surface according to national standard of China (GB 14934-2016). However, there is no report heretofore addressing SDBS sensing on surfaces. More importantly, the interferents often affect the sensing performance of analytical approaches. Hence, there is an urgent need to establish a method with good anti-interference ability for SDBS detection both on tableware surfaces and in water.

RESULTS

Inspired by a finding that SDBS could cause the generation of white turbidity in (3-aminopropyl)trimethoxysilane (APTMS, an aminosilane) aqueous solution, APTMS modified Mn doped ZnS quantum dots (QDs) and fluorescent (FL) whitening agent (FWA) were constructed as a ratiometric probe for FL and visual sensing of SDBS. The modified QDs aggregated and settled in presence of SDBS, which was likely to be connected to the stimulatory effect of SDBS on the APTMS self-condensation and the electrostatic attraction. The FL emission from the QDs at 605 nm then decreased dramatically, whereas that at 425 nm was virtually constant owing to FWA. SDBS sensing could be achieved by calculating the ratio change of their FL intensities. The detection limits of FL and visual methods were found to be 0.011 and 10 μg/L, respectively, making it one of the most sensitive approaches in literature. Finally, it was successfully utilized for SDBS detection on tableware surfaces and in water.

SIGNIFICANCE

Herein, the specific interaction between SDBS and APTMS was reported and the reaction mechanisms were explored for the first time. The proposed probe based on the effect described above provided a promising potential for SDBS analysis owing to high sensitivity, selectivity, anti-interference ability, and stability (in 20 days).

In-Situ Formation of Modified Nickel–Zinc-Layered Double Hydroxide Followed by HPLC Determination of Neonicotinoid Insecticide Residues

A single-step preconcentration procedure using the in-situ formation of modified nickel–zinc-layered double hydroxides (LDHs) prior to high-performance liquid chromatography (HPLC) is investigated for the determination of neonicotinoid insecticide residues in honey samples. The LDHs could be prepared by the sequential addition of sodium hydroxide, sodium dodecyl sulfate, nickel nitrate 6-hydrate and zinc nitrate 6-hydrate, which were added to the sample solution. The co-precipitate phase and phase separation were obtained by centrifugation, and then the precipitate phase was dissolved in formic acid (concentrate) prior to HPLC analysis. Various analytical parameters affecting extraction efficiency were studied, and the characterization of the LDHs phase was performed using Fourier-transformed infrared spectroscopy and scanning electron microscopy. Under optimum conditions, the limit of detection of the studied neonicotinoids, in real samples, were 30 μg L⁻¹, for all analytes, lower than the maximum residue limits established by the European Union (EU). The developed method provided high enrichment, by a factor of 35. The proposed method was utilized to determine the target insecticides in honey samples, and acceptable recoveries were obtained.

Co-precipitation based on layered double hydroxides and anionic surfactants for preconcentration of six benzoylurea insecticides in soft drinks before simultaneous analysis by high-performance liquid chromatography

Layered-double hydroxides (LDHs) modified with anionic surfactants via a co-precipitation method were developed for preconcentrating and simultaneous analysis of six benzoylurea insecticides (BUs) by high-performance liquid chromatography (HPLC). The anionic surfactants with different chain lengths, including sodium dodecylbenzene sulfonate (SDBS), sodium dodecyl sulfate (SDS), sodium 1-nonane sulfonate (SNS), and sodium 1-hexane sulfonate monohydrate (SHS) were investigated to improve the extraction efficiency of LDHs. The SDBS-LDHs provided the highest efficiency for the enrichment of the BUs studied. Under the chosen conditions, enrichment factors in the range of 38-69 and detection limits in the range of 0.1-0.3 μg L^-1 were achieved. Good reproducibilities (RSD < 13.8%) and recoveries (71.4-118.7%) were also obtained. The proposed preconcentration method, used as an in situ procedure offers rapid and simple simultaneous preparation of LDHs and extraction of BUs. The method was successfully applied for residue analysis of BUs in fruit- and flower-derived soft drink samples.

Recent Advances in Layered Double Hydroxide-Based Electrochemical and Optical Sensors

Layered double hydroxides (LDHs) have attracted considerable attention as promising materials for electrochemical and optical sensors owing to their excellent catalytic properties, facile synthesis strategies, highly tunable morphology, and versatile hosting ability. LDH-based electrochemical sensors are affordable alternatives to traditional precious-metal-based sensors, as LDHs can be synthesized from abundant inorganic precursors. LDH-modified probes can directly catalyze or host catalytic compounds that facilitate analyte redox reactions, detected as changes in the probe's current, voltage, or resistance. The porous and lamellar structure of LDHs allows rapid analyte diffusion and abundant active sites for enhanced sensor sensitivity. LDHs can be composed of conductive materials such as reduced graphene oxide (rGO) or metal nanoparticles for improved catalytic activity and analyte selectivity. As optical sensors, LDHs provide a spacious, stable structure for synergistic guest-host interactions. LDHs can immobilize fluorophores, chemiluminescence reactants, and other spectroscopically active materials to reduce the aggregation and dissolution of the embedded sensor molecules, yielding enhanced optical responses and increased probe reusability. This review discusses standard LDH synthesis methods and overviews the different electrochemical and optical analysis techniques. Furthermore, the designs and modifications of exemplary LDHs and LDH composite materials are analyzed, focusing on the analytical performance of LDH-based sensors for key biomarkers and pollutants, including glucose, dopamine (DA), H2O2, metal ions, nitrogen-based toxins, and other organic compounds.

A review on optical sensors based on layered double hydroxides nanoplatforms

In recent years, significant efforts have been devoted towards the fabrication and application of layered double hydroxides (LDHs) due to their tremendous features such as excellent biocompatibility with negligible toxicity, large surface area, high conductivity, excellent solubility, and ion exchange properties. Most impressive, LDHs offer a favorable environment to attach several substances such as quantum dots, fluorescein dyes, proteins, and enzymes, which leads to strengthening the catalytic properties or increasing the sensing selectivity and sensitivity of the resulted hybrids. With the extensive ongoing research on the application of nanomaterials, many studies have led to remarkable achievements in exploring LDHs as sensing nanoplatforms. In optical sensors, for instance, many sensing strategies were tailored based on the enzyme-mimicking properties of LDHs, including colorimetric and chemiluminescence procedures. Meanwhile, others were designed based on intercalating some fluorogenic substrates on the LDHs, whereby the sensing signal can be acquired by quenching or enhancing their fluorescence after the addition of analytes. In this review, we aim to summarize the recent advances in optical sensors that use layered double hydroxides as sensing platforms for the determination of various analytes. By outlining some representative examples, we accentuate the change of spectral absorbance, chemiluminescence, and photoluminescence phenomena triggered by the interaction of LDH or functionalized-LDH with the indicators and analytes in the system. And finally, current limitations and possible future orientation in designing further LDHs-based optical sensors are presented. It is hoped that this review will be helpful in assisting the establishment of more improved sensors based on LDHs features. Optical sensors based on layered double hydroxides (LDHs) nanoplatforms were reviewed. The sensing system and detection approaches were rationally reviewed. Possible future orientations were highlighted.

Dissolvable Mg/Al layered double hydroxides and surfactant as an extractant for trace analysis of benzoylurea insecticides by high performance liquid chromatography

A rapid and simple preconcentration method using dissolvable Mg/Al layered-double hydroxides (LDHs) and high performance liquid chromatography-photodiode array detection (HPLC-PDA) was developed for the analysis of benzoylurea insecticides (BUs) in water and honey samples. The proposed dissolvable LDHs for the extraction can be prepared in one step by the sequential addition of sodium hydroxide, magnesium chloride, aluminium chloride, and sodium dodecyl sulfate into the sample solution containing the target BUs. The co-precipitate phase was simply obtained after centrifugation, and the phase was then dissolved with formic acid before analysis by HPLC. The developed method provided an enrichment factor of 12.5-23.7. LODs were obtained in the range of 0.1-0.3 μg L^-1 for deionized water, 0.2-2.0 μg L^-1 for environmental waters, and 0.5-2.0 μg L^-1 for the analyzed honey samples. Good recoveries ranging from 78.4 to 117.8% and 72.7 to 117.9% for water and honey samples, respectively, were obtained.

Developing a novel packed in-tube solid-phase extraction method for determination ∆ 9-tetrahydrocannabinol in biological samples and cannabis leaves

A novel plate-like nano-sorbent based on copper/cobalt/chromium layered double hydroxide was synthesized by a simple coprecipitation method. The synthesized nanoparticels were introduced into a stainless steel cartridge using a dry packing method. Then, the packed cartridge was introduced as a novel on-line "packed in-tube" configuration and followed by high performance liquid chromatography for the determination of trace amounts of ^∆ 9-tetrahydrocannabinol from biological samples and cannabis leaves. The as-prepared sorbent exhibited long lifetime, good chemical stability, and high anion-exchange capacity. Several important factors affecting the extraction efficiency, such as extraction and desorption times, pH of the sample solution and flow rates of the sample and eluent solutions, were investigated and optimized. Under optimized conditions, this method showed good linearity for ^∆ 9-tetrahydrocannabinol in the ranges of 0.09-500, 0.3-500, and 0.4-500 µg/L with coefficients of determination of 0.9999, 0.9991, and 0.9994 in water, serum and plasma samples, respectively. The inter- and intra-assay precisions (n = 3) were respectively in the ranges of 1.8-4.6% and 1.9-4.0% at three concentration levels of 10, 50, and 100 µg/L. The limits of detection were also in the range of 0.02-0.1 µg/L.

Recent advances in chemiluminescence based on carbonaceous dots

Herein, a broad overview concerning the most recent progress of carbon dots (CDs) in chemiluminescence (CL) as well as the mechanisms and applications are presented. CDs have excellent optical and electronic properties and are very important advancement in the fast growing domain of nanotechnology. CDs enhance the ultraweak CL of different systems. The mechanisms and applications of these enhanced CL reactions are discussed. It is worthy to note that CDs participate in CL reactions as catalysts, energy acceptors or are directly involved in redox reactions with radicals in CL systems. Sometimes, these processes taking place simultaneously to enhance CL intensity. In this report, recent advances in CD based CL are comprehensively summarized and their applications in detection of various reagents and biological molecules are reviewed. The challenges and future prospects of this field are also discussed.

Preparation and characterization of polystyrene-MgAl layered double hydroxide nanocomposites using bulk polymerization

Polymer/mineral filler nanocomposites are more and more used for diverse applications. As mineral fillers, layered double hydroxides (LDHs) present a great advantage as flame retardants from an environmental point a view (reduction of smoke and toxic gases). This article deals with the use of LDH as flame retardants as compared to montmorillonite (MMT). In situ bulk polymerization of styrene was carried out in the presence of MgAl LDH modified with dodecyl sulfate (DDS) and dodecylbenzene sulfonate (DBS) surfactants. LDH concentrations used were lower than 10 wt.%. X-ray diffraction analysis of the LDH-styrene suspensions revealed the monomer intercalation into the DDS-LDH galleries and a slight decrease in the DBS-LDH basal spacing. Transmission electron microscopy analysis showed that the polymerization occurred outside the DBS-LDH galleries, leading to exfoliation of the layers on the outer surface of LDH platelets. DDS-LDH particles were trapped in the PS polymer. The thermal stability effect was observed for all LDH nanocomposites by thermogravimetric analysis. Cone calorimetry measurements revealed that only the DBS-LDH nanofiller resulted in a reduction of the peak heat released rate (PHHR) and a decrease of smoke released. DBS-LDH/PS exhibited fire properties close to those of clay-PS nanocomposite at 7 wt.% montmorillonite. The PHRR reduction remained small and the total heat release rate constant at 7 wt.% DBS-LDH loading.

Carbon dots as fluorescent probe for "off-on" Detecting sodium dodecyl-benzenesulfonate in aqueous solution

In this paper, we propose an "off-on" approach for the detection of sodium dodecyl-benzenesulfonate (SDBS) using carbon dots (CDs) as fluorescent probe. We firstly demonstrated that the fluorescence of CDs decreased apparently in the presence of ruthenium (Ru), and the system was thus "turn-off". The resulting CDs-Ru system was found to be sensitive to SDBS, SDBS not only serves to shelter the CDs effectively from being quenched, but also to reverse the quenching and restore the fluorescence due to its ability to remove Ru from the surface of CDs (turn-on). An eco-friendly, simple and sensitive platform for the detection of SDBS based on the CDs-Ru probes has been proposed. After the experimental conditions were optimized, the linear range for detection SDBS was 0.10-7.50 μg/mL, with correlation coefficient (r) 0.9988, detection limit was 0.033 μg/mL (3σ). This method is facile, rapid, low cost, environment-friendly, and possesses the potential for practical application.