Charge-based characterisation of high-molecular-weight glutenin subunits from common wheat by capillary isoelectric focusing

Composition of low-molecular-weight glutenin subunits in common wheat (Triticum aestivum L.) and their effects on the rheological properties of dough

The main purpose of this research was the identification and characterization of low-molecular-weight glutenin subunit (LMW-GS) composition in common wheat and the determination of the effect of these proteins on the rheological properties of dough. The use of capillary zone electrophoresis and reverse-phase high-performance liquid chromatography has made it possible to identify four alleles in the Glu-A3 and Glu-D3 loci and seven alleles in the Glu-B3 locus, encoding LMW-GSs in 70 varieties and breeding lines of wheat tested. To determine the technological quality of dough, analyses were performed at the microscale using a TA.XT Plus Texture Analyzer. Wheat varieties containing the Glu-3 loci scheme (Glu-A3b, Glu-A3f at the Glu-A3 locus; Glu-B3a, Glu-B3b, Glu-B3d, Glu-B3h at the Glu-B3 locus; Glu-D3a, Glu-D3c at the Glu-D3 locus) determined the most beneficial quality parameters.

Effects of HMW-GSs on quality related traits in wheat (Triticum aestivum L.) under different water regimes

Alleles at the Glu-1 loci play important roles in the functional properties of wheat flour. The effects of various high-molecular-weight glutenin subunit (HMW-GS) compositions on quality traits and bread-making properties were evaluated using 235 doubled haploid lines (DHs). The experiment was conducted in a split plot design with two water regimes as the main plot treatment, and DH lines as the subplot treatments. Results showed that the presence of subunit pair 5+10 at the Glu-D1 locus, either alone or in combination with others, appears to provide an improvement in quality and bread-making properties. At the Glu-A1 locus, subunit 1 produced a higher Zeleny sedimentation value (Zel) and stretch area (SA) than subunit 2* when subunits 14+15 and 5+10 were expressed at the Glu-B1 and Glu-D1 loci, and 2* had a positive effect on the maximum dough resistance (Rmax) when subunits 14+15 and 5'+12 were expressed at the Glu-B1 and Glu-D1 loci, respectively. Given subunit 1 at the Glu-A1 locus and 5'+12 at the Glu-D1 locus, the effects of Glu-B1 subunits 14+15 on the tractility (Tra), dough stability time (ST), and dough development time (DT) under the well-watered regime were significantly higher than those of Glu-B1 subunits 13+16. However, 13+16 had a positive effect on SA under the rain-fed regime when subunits 2* and 5+10 were expressed at the Glu-A1 and Glu-D1 loci, respectively. Multiple comparisons analysis revealed that the Zel and Rmax of the six subunits and eight HMW-GS compositions were stable under different water regimes. Overall, subunit compositions 1, 13+16 and 5+10 and 1, 14+15 and 5+10 had higher values for quality traits and bread-baking properties under the two water regimes. These results could play a positive guiding role in selecting and popularizing varieties suitable for production and cultivation in local areas.

Cloning and characterization of an oxiranedicarboxylate hydrolase from Labrys sp. WH-1

OBJECTIVE

This study aimed to clone and characterize the oxiranedicarboxylate hydrolase (ORCH) from Labrys sp. WH-1.

METHODS

Purification by column chromatography, characterization of enzymatic properties, gene cloning by protein terminal sequencing and polymerase chain reaction (PCR), and sequence analysis by secondary structure prediction and multiple sequence alignment were performed.

RESULTS

The ORCH from Labrys sp. WH-1 was purified 26-fold with a yield of 12.7%. It is a monomer with an isoelectric point (pI) of 8.57 and molecular mass of 30.2 kDa. It was stable up to 55 °C with temperature at which the activity of the enzyme decreased by 50% in 15 min (T₅₀¹⁵) of 61 °C and the half-life at 50 °C (t_{1/2, 50 °C}) of 51 min and was also stable from pH 4 to 10, with maximum activity at 55 °C and pH 8.5. It is a metal-independent enzyme and strongly inhibited by Cu²⁺, Ag⁺, and anionic surfactants. Its kinetic parameters (K_m, k_cat, and k_cat/K_m) were 18.7 mmol/L, 222.3 s^-1, and 11.9 mmol/(L·s), respectively. The ORCH gene, which contained an open reading frame (ORF) of 825 bp encoding 274 amino acid residues, was overexpressed in Escherichia coli and the enzyme activity was 33 times higher than that of the wild strain.

CONCLUSIONS

The catalytic efficiency and thermal stability of the ORCH from Labrys sp. WH-1 were the best among the reported ORCHs, and it provides an alternative catalyst for preparation of L(+)-2,3-dihydrobutanedioic acid.

The influence of Glu-1 and Glu-3 loci on dough rheology and bread-making properties in wheat (Triticum aestivum L.) doubled haploid lines

BACKGROUND

The major determinants of wheat quality are Glu-1 and Glu-3 glutenin loci and environmental factors. Additive effects of alleles at the Glu-1 and Glu-3 loci, as well as their interactions, were evaluated for dough rheology and baking properties in four groups of wheat doubled haploid lines differing in high- and low-molecular-weight glutenin composition.

RESULTS

Flour quality, Reomixer (Reologica Instruments, Lund, Sweden), dough extension, Farinograph (Brabender GmbH, Duisburg, Germany) and baking parameters were determined. Groups of lines with the alleles Glu-A3b and Glu-B3d were characterized by higher values of dough and baking parameters compared to those with the Glu-A3e and Glu-B3a alleles. Effects of interactions between allelic variants at the Glu-1 and Glu-3 loci on Reomixer parameters, dough extension tests and baking parameters were significant, although additive effects of individual alleles were not always significant.

CONCLUSION

The allelic variants at Glu-B3 had a much greater effect on dough rheological parameters than the variants at Glu-A3 or Glu-D3 loci. The effect of allelic variations at the Glu-D3 loci on rheological parameters and bread-making quality was non-significant, whereas their interactions with a majority of alleles at the other Glu-1 × Glu-3 loci were significant. © 2017 Society of Chemical Industry.

Molecular and functional analysis of monoclonal antibodies in support of biologics development

Monoclonal antibody (mAb)-based therapeutics are playing an increasingly important role in the treatment or prevention of many important diseases such as cancers, autoimmune disorders, and infectious diseases. Multi-domain mAbs are far more complex than small molecule drugs with intrinsic heterogeneities. The critical quality attributes of a given mAb, including structure, post-translational modifications, and functions at biomolecular and cellular levels, need to be defined and profiled in details during the developmental phases of a biologics. These critical quality attributes, outlined in this review, serve an important database for defining the drug properties during commercial production phase as well as post licensure life cycle management. Specially, the molecular characterization, functional assessment, and effector function analysis of mAbs, are reviewed with respect to the critical parameters and the methods used for obtaining them. The three groups of analytical methods are three essential and integral facets making up the whole analytical package for a mAb-based drug. Such a package is critically important for the licensure and the post-licensure life cycle management of a therapeutic or prophylactic biologics. In addition, the basic principles on the evaluation of biosimilar mAbs were discussed briefly based on the recommendations by the World Health Organization.

Variation of high-molecular-weight secalin subunit composition in Rye (Secale cereale L.) inbred lines

In this study, identification and characterization of the rye HMW secalin subunit (HMW-SS) composition in 68 inbred rye (Secale cereale L.) lines was performed by capillary zone electrophoresis (CZE). The HMW-SS were separated in an uncoated fused-silica capillary using an isoelectric iminodiacetic buffer in combination with poly(ethylene oxide), lauryl sulfobetaine, and acetonitrile as the separation buffer. The separations of the nonalkylated HMW-SS provided very good resolution and high reproducibility. Generally, the x-type rye HMW-SS were more abundant and have longer migration times than the y-type subunits. Both types of rye HMW-SS were separated into the major protein peak and one or two minor peaks. In total, seven x-type HMW-SS, five of which were newly identified subunits, and six y-type subunits, four of which were new, were distinguished on the basis of their CZE migration times. The migration order of the rye HMW-SS using CZE differed considerably from the relative electrophoretic mobilities in the SDS-PAGE gels.