Homogeneous immunoassays by using photon burst counting technique of single gold nanoparticles

Objective scanning-based fluorescence cross-correlation spectroscopy (Scan-FCCS) for studying the fusion dynamics of protein phase separation

Protein phase separation plays a very important role in many biological processes and is closely related to the occurrence and development of some serious diseases. So far, the fluorescence imaging method and fluorescence correlation spectroscopy (FCS) have been frequently used to study the phase separation behavior of proteins. Due to the wide size distribution of protein condensates in phase separation from nano-scale to micro-scale in solution and living cells, it is difficult for the fluorescence imaging method and conventional FCS to fully reflect the real state of protein phase separation in the solution due to the low spatio-temporal resolution of the conventional fluorescence imaging method and the limited detection area of FCS. Here, we proposed a novel method for studying the protein phase separation process by objective scanning-based fluorescence cross-correlation spectroscopy (Scan-FCCS). In this study, CRDBP proteins were used as a model and respectively fused with fluorescent proteins (EGFP and mCherry). We first compared conventional FCS and Scan-FCS methods for characterizing the CRDBP protein phase separation behaviors and found that the reproducibility of Scan-FCS is significantly improved by the scanning mode. We studied the self-fusion process of mCherry-CRDBP and EGFP-CRDBP and observed that the phase change concentration of CRDBP was 25 nM and the fusion of mCherry-CRDBP and EGFP-CRDBP at 500 nM was completed within 70 min. We studied the effects of salt concentration and molecular crowding agents on the phase separation of CRDBP and found that salt can prevent the self-fusion of CRDBP and molecular crowding agents can improve the self-fusion of CRDBP. Furthermore, we found the recruitment behavior of CRDBP to β-catenin proteins and studied their recruitment dynamics. Compared to conventional FCS, Scan-FCCS can significantly improve the reproducibility of measurements due to the dramatic increase of detection zone, and more importantly, this method can provide information about self-fusion and recruitment dynamics in protein phase separation.

Rapid FRET-based homogeneous immunoassay of procalcitonin using matched carbon dots labels

A novel method for the detection of procalcitonin in a homogeneous system by matched carbon dots (CDs) labeled immunoprobes was proposed based on the principle of FRET and double antibody sandwich method. Blue-emitting carbon dots with a strong fluorescence emission range of 400-550 nm and red-emitting carbon dots with the best excitation range of 410-550 nm were prepared before they reacted with procalcitonin protoclone antibody pairs to form immunoprobes. According to the principles of FRET, blue-emitting carbon dots were selected as the energy donor and red-emitting carbon dots as the energy receptor. The external light source excitation (310 nm) could only cause weak luminescence of CDs. However, once procalcitonin was added, procalcitonin and antibodies would be combined with each other quickly (≤20 min). Here, blue-emitting carbon dots acquired energy could be transferred to red-emitting carbon dots efficiently, causing the emitted fluorescence enhancement of red-emitting carbon dots. The fluorescence detection results in PBS buffer solution and diluted rabbit blood serum showed that the fluorescence intensity variation was linear with the concentration of procalcitonin. There was a good linear relationship betweenF/F0 and procalcitonin concentrations in PBS buffer solution that ranged from 0 to 100 ng ml^-1, and the linear equation wasF/F0 = 0.004 *C_pct + 0.98359. Detection in the diluted rabbit serum led to the results that were linear in two concentration ranges, including 0-40 ng ml^-1and 40-100 ng ml^-1, and the detection limit based on 3σK^-1was 0.52 ng ml^-1. It is likely that this matched CDs labeled immunoprobes system can provide a new mode for rapid homogeneous detection of disease markers.

The Theoretical Model, Method, and Applications of Scattering Photon Burst Counting Based on an Objective Scanning Technique

Scattering photon burst counting (SPBC) is a single-particle detection method, which is based on measuring scattering photon bursting of single nanoparticles through a detection volume of <1 fL. Although SPBC has been used for bioassays and analysis of nanoparticles, it is necessary to establish its theoretical model and develop a new detection mode in order to further enhance its sensitivity and enlarge its application fields. In this paper, we proposed a theoretical model for the confocal SPBC method and developed a novel SPBC detection mode using the fast objective scanning technique. The computer simulations and experiments documented that this model well describes the relation between photon counts and experimental parameters (such as nanoparticle concentration and diameter, temperature, and viscosity). Based on this model, we developed a novel SPBC detection mode by using the fast objective scanning technique. Compared to the current confocal SPBC method, the sensitivity of this new method was significantly increased due to the significantly increased photon counts per sampling time, the linear detection range is from 0.9 to 90 pM, and the limit of detection is reduced to 40 fM for 30 nm gold nanoparticles. Furthermore, this new method was successfully applied to determine the enzyme activity of caspase-3 and evaluate the inhibition effectiveness of some inhibitors.

Single-Particle Catalytic Analysis by a Photon Burst Counting Technique Combined with a Microfluidic Chip

Single-particle catalytic analysis plays an important role to understand the catalytic mechanism of nanocatalysts. Currently, some methods are used to study the relationship between single-particle catalytic activity and morphology. However, there is still lack of a simple and rapid analysis method for evaluating the catalytic activity of an individual nanocatalyst that freely moves in solution. Here, we proposed a novel single-particle catalytic analysis method for investigating the catalytic activity of a free nanocatalyst. Its working principle is based on the photon burst counting analysis on fluorescent catalytic products of an individual nanocatalyst combined with a microfluidic chip. In this study, we used the reduction reaction of resazurin (RZ) to resorufin (RF) catalyzed by gold nanoparticles (GNPs) as a model. When nonfluorescent RZ molecules in one microchannel of the microfluidic chip mixed with the GNPs flowing in another channel under the control of flow rates, each individual photon burst from the catalytic product RF by GNPs was measured in real time with a constructed flow single-particle catalytic analysis (SPCA) system. With the method, the obtained intensity of each photon burst reflects the capacity of a particle to catalyze RZ molecules into RF(s). The number of photon burst within sampling time reflects the particle number of GNPs with catalytic activity. The experimental conditions including the mixing mode of the nanocatalyst and the substrate, the flow rate, RZ concentration, and detection time were optimized. Finally, the method was successfully used to study the catalytic activity of GNPs with different sizes and morphologies.

One-photon excited photoluminescence of gold nanospheres and its application in prostate specific antigen detection via fluorescence correlation spectroscopy (FCS)

Gold nanoparticles are known to exhibit appealing intrinsic plasmon-modulated photoluminescence (PL) properties which can be explored in various fluorescence-based sensing applications. In this paper, we evaluate the PL of different-sized gold nanospheres (AuNSs) under one-photon excitation (1PE) and develop a sensitive homogeneous immunoassay for the detection of prostate specific antigen (PSA) in colloidal suspension via fluorescence correlation spectroscopy (FCS). The 1PE PL of AuNSs of three different sizes are evaluated in solution phase under excitation at 405 nm via steady-state fluorescence spectroscopy measurements, while FCS analysis emphasizes the feasibility of using 1PE PL properties to monitor their diffusion behavior. Fluorescence lifetime imaging microscopy (FLIM) assays coupled with PL spectral profile analysis performed on single-particles-like structures conform the plasmonic origin of the detected PL and validate their potential of synthesized AuNSs as fluorescent probes in bioimaging and bioassays. Finally, to the best of our knowledge, we provide the first demonstration of the successful use of the 1PE PL of the synthesized AuNSs as probes for the FCS-based one-step label-free sensitive optical detection of PSA biomarker. The approach consisting in monitoring the diffusion of the AuNSs-oligomers induced by the interaction of anti-PSA-conjugated AuNSs with PSA molecules is successfully validated for the detection of PSA levels as low as 4.4 ng/ml in solution. Considering that the development of rapid, efficient and label-free biosensing methods is of continuous interest nowadays, we are confident that our results may have a strong impact on medicine towards more efficient, sensitive and reliable diagnosis.

Surface Plasmon Resonance or Biocompatibility-Key Properties for Determining the Applicability of Noble Metal Nanoparticles

Metal and in particular noble metal nanoparticles represent a very special class of materials which can be applied as prepared or as composite materials. In most of the cases, two main properties are exploited in a vast number of publications: biocompatibility and surface plasmon resonance (SPR). For instance, these two important properties are exploitable in plasmonic diagnostics, bioactive glasses/glass ceramics and catalysis. The most frequently applied noble metal nanoparticle that is universally applicable in all the previously mentioned research areas is gold, although in the case of bioactive glasses/glass ceramics, silver and copper nanoparticles are more frequently applied. The composite partners/supports/matrix/scaffolds for these nanoparticles can vary depending on the chosen application (biopolymers, semiconductor-based composites: TiO₂, WO₃, Bi₂WO₆, biomaterials: SiO₂ or P₂O₅-based glasses and glass ceramics, polymers: polyvinyl alcohol (PVA), Gelatin, polyethylene glycol (PEG), polylactic acid (PLA), etc.). The scientific works on these materials' applicability and the development of new approaches will be targeted in the present review, focusing in several cases on the functioning mechanism and on the role of the noble metal.

Detection of rotavirus in clinical specimens using an immunosensor prototype based on the photon burst counting technique

In this study, a sensitive fluorescence sensor was developed for the detection of small, fluorescence-labeled particles dispersed in a solution. The prototype system comprises of a laser confocal optical system and a mechanical sample stage to detect photon bursting of fluorescence-labeled small particles in sample volumes less than 5 μL within 3 minutes. To examine the feasibility of the prototype system as a diagnostic tool, assemblages of rotavirus and fluorescence-labeled antibody were analyzed. The detection sensitivity for rotavirus was 1 × 10⁴ pfu/mL. Rotavirus in stool samples from patients with acute gastroenteritis was also detected. The advantages and disadvantages of this immunosensor with respect to ELISA and RT-PCR, the current gold standards for virus detection, are discussed.