A peroxidase biomimetic system based on Fe3O4 nanoparticles in non-enzymatic sensors

Fe3 O4 nanozyme coating enhances light-driven biohydrogen production in self-photosensitized Shewanella oneidensis-CdS hybrid systems

Solar-driven biohybrid systems that produce chemical energy are a valuable objective in ongoing research. However, reactive oxygen species (ROS) that accompany nanoparticle production under light radiation severely affect the efficiency of biohybrid systems. In this study, we successfully constructed a two-hybrid system, Shewanella oneidensis-CdS and S. oneidensis-CdS@Fe3 O4 , in a simple, economical, and gentle manner. With the Fe3 O4 coating, ROS were considerably eliminated; the hydroxyl radical, superoxide radical, and hydrogen peroxide contents were reduced by 66.7%, 65.4%, and 72%, respectively, during light-driven S. oneidensis-CdS hydrogen production. S. oneidensis-CdS@Fe3 O4 showed a 2.6-fold higher hydrogen production (70 h) than S. oneidensis-CdS. Moreover, the S. oneidensis-CdS system produced an additional 367.8 μmol g-dcw-1 (70 h) of hydrogen compared with S. oneidensis during irradiation. The apparent quantum efficiencies of S. oneidensis-CdS and S. oneidensis-CdS@Fe3 O4 were 6.2% and 11.5%, respectively, exceeding values previously reported. In conclusion, a stable nanozyme coating effectively inhibited the cytotoxicity of CdS nanoparticles, providing an excellent production environment for bacteria. This study provides a rational strategy for protecting biohybrid systems from ROS toxicity and contributes to more efficient solar energy conversion in the future.

A Highly Sensitive Electrochemical Sensor for Capsaicinoids and Its Application in the Identification of Illegal Cooking Oil

Capsaicinoids, mostly from chili peppers, are widely used in daily life. Capsaicinoids are considered to be markers for the identification of illegal cooking oil (ICO), which is a serious threat to public health. The identification of capsaicinoids can help reveal food-related fraud, thereby safeguarding consumers' health. Here, a novel and ultrasensitive method was established with a signal amplification strategy for the detection of capsaicinoids. AuNPs@Fe3O4 nanocomposites were functionalized with 4-aminothiophenol (4-atp). After diazotization, 4-atp on AuNPs@Fe3O4 reacted with capsaicinoids and formed capsaicinoids-azo-atp-AuNPs@Fe3O4. Ultimately, capsaicinoids-azo-atp-AuNPs@Fe3O4 was dropped onto the surface of a screen-printed carbon electrode (SPCE) and detected via the differential pulse voltammetry (DPV) method. AuNPs@Fe3O4 nanocomposites increased the specific surface area of the electrode. Moreover, the diazotization-coupling reaction enriched the analytes on the electrode surface. Liquid-liquid extraction was used for sample pretreatment. Under a pH value of 9.0 and concentration of 0.20 mol/L for the supporting electrolyte, the linearity of capsaicinoids in ICO is from 0.10 to 10.00 ng/mL, and the limit of detection (S/N = 3) is 0.05 ng/mL. This method is ultra-sensitive, reliable, and cost-effective for the detection of capsaicinoids. Herein, this method provides a promising tool for the identification of ICO.

Biomimetic electrochemical sensors: New horizons and challenges in biosensing applications

The urge to meet the ever-growing needs of sensing technology has spurred research to look for new alternatives to traditional analytical methods. In this scenario, the glucometer is the flagship of commercial electrochemical sensing platforms, combining selectivity, reliability and portability. However, other types of enzyme-based biosensors seldom achieve the market, in spite of the large and increasing number of publications. The reasons behind their commercial limitations concern enzyme denaturation, and the high costs associated with procedures for their extraction and purification. In this sense, biomimetic materials that seek to imitate the desired properties of natural enzymes and biological systems have come out as an appealing path for robust and sensitive electrochemical biosensors. We herein portray the historical background of these biomimicking materials, covering from their beginnings until the most impactful applications in the field of electrochemical sensing platforms. Throughout the discussion, we present and critically appraise the major benefits and the most significant drawbacks offered by the bioinspired systems categorized as Nanozymes, Synzymes, Molecularly Imprinted Polymers (MIPs), Nanochannels, and Metal Complexes. Innovative strategies of fabrication and challenging applications are further reviewed and evaluated. In the end, we ponder over the prospects of this emerging field, assessing the most critical issues that shall be faced in the coming decade.

Synthesizing Electrodes Into Electrochemical Sensor Systems

Electrochemical sensors that can determine single/multiple analytes remain a key challenge in miniaturized analytical systems and devices. In this study, we present in situ synthesis and modification of gold nanodendrite electrodes to create an electrochemical system for the analysis of hydrogen peroxide. The sensor system consisted of the reference and counter electrodes as well as the working electrode. Electrochemical reduction of graphene oxide, ErGO, on the thin-film gold and gold nanodendrite working electrodes was used to achieve an efficient sensor interface for the adsorption of a biomimetic electrocatalytic sensor material, Mn(III) meso-tetra(N-methyl-4-pyridyl) porphyrin complex, with as high as 10^-10 mol cm^-2 surface coverage. The sensor system demonstrated a detection limit of 0.3 µM H₂O₂ in the presence of oxygen. Electrochemical determination of hydrogen peroxide in plant material in the concentration range from 0.09 to 0.4 µmol (gFW)^-1 using the electrochemical sensor system was shown as well as in vivo real-time monitoring of the hydrogen peroxide dynamics as a sign of abiotic stress (intense sunlight). Results of the electrochemical determination were in good agreement with the results of biochemical analysis with the spectrophotometric detection. We anticipate that this method can be extended for the synthesis and integration of multisensor arrays in analytical microsystems and devices for the quantification and real-time in vivo monitoring of other analytes and biomarkers.

Application of magnetic nanomaterials in electroanalytical methods: A review

Magnetic nanomaterials (MNMs) have gained high attention in different fields of studies due to their ferromagnetic/superparamagnetic properties and their low toxicity and high biocompatibility. MNMs contain magnetic elements such as iron and nickel in metallic, bimetallic, metal oxide, and mixed metal oxide. In electroanalytical methods, MNMs have been applied as sorbents for sample preparation before the electrochemical detection (sorbent role), as the electrode modifier (catalytic role), and the integration of the above two roles (as both sorbent and catalytic agent). In this paper, the application of MNMs in electroanalytical methods have been classified based on the main role of the nanomaterial and discussed separately. Furthermore, catalytic activities of MNMs in electroanalytical methods such as redox electrocatalytic, nanozymes catalytic (peroxidase, catalase activity, oxidase activity, superoxide dismutase activity), catalyst gate, and nanocontainer have been discussed.

Ratiometric fluorescence assay for L-Cysteine based on Fe-doped carbon dot nanozymes

In this work, a ratiometric fluorescence method based on nanozyme was fabricated to determine L-Cysteine. Taking silkworm feces as a carbon source, together with Fe³⁺, Fe-doped carbon dots (Fe-CDs) were synthesized through a hydrothermal method. Fe-CDs were able to oxidize the enzyme substrate o-phenylenediamine (OPD) to produce oxidized OPD (Ox-OPD) when H₂O₂ coexisted with them. Based on the fluorescence property of Fe-CDs and Ox-OPD, a dual-emission system was built. Since L-Cysteine contains reductive thiols that can inhibit the production of Ox-OPD, the addition of L-Cysteine caused a decrease in the fluorescence intensity of Ox-OPD. The results showed that the ratio of fluorescence intensities at 450 and 560 nm (I₄₅₀/I₅₆₀) varied linearly with the concentration of L-Cysteine in the range of 0.25-90 μM and the limit of detection is as low as 0.047 μM. Furthermore, using this ratiometric fluorescence system to determine L-Cysteine in serum and tap-water samples, average recoveries were evaluated to reach 98.75%-103.27% with the relative standard deviation of no more than 4.5%. Based on the fluorescence property and nanozyme-like activity, this work provides an inspiration to open a new horizon in using natural carbon source to synthesize CDs and for the application of CDs as a nanozyme.

Treatment of simulated electroplating wastewater containing Ni(II)-EDTA by Fenton oxidation combined with recycled ferrite process under ambient temperature

Developing low cost and efficient method for the treatment of electroplating wastewater containing heavy metals complexed with chelating agent has attracted increasing attention in industrial wastewater treatment. This study involved a system combining Fenton oxidation (FO) and recycled ferrite (RF) process for treating synthetic solution containing Ni(II)-EDTA at ambient temperature. In this system, the FO reaction can produce hydroxyl radicals with high redox potential to decomplex the metal-organic complexes and degrade the organics, thereby enhancing the removal efficiency of heavy metals. The RF process is to incorporate the non-iron metal into the spinel ferrites at room temperature, and stabilize the sludge. As a result, the toxicity characteristic leaching procedure can fulfill the relevant standards. Furthermore, the ferrous ions in Fenton reaction could be used as the source of irons in RF process. After treatment by the combined process, the effluent water fulfills the relevant standard in China. In comparison with conventional alkaline precipitation, the sludge sedimentation velocity of FO-RF is 2.16 times faster than that of conventional alkaline precipitation and the volume of sludge is reduced by half, which strongly demonstrated the advantages of the presented FO-RF system and indicated the huge potential for the treatment of EDTA-chelated nickel.

Nanomaterials with enzyme-like characteristics (nanozymes): next-generation artificial enzymes (II)

An updated comprehensive review to help researchers understand nanozymes better and in turn to advance the field.

Antimicrobial magnetic nanoparticles based-therapies for controlling infectious diseases

In the last years, the antimicrobial resistance against antibiotics has become a serious health issue, arise as global threat. This has generated a search for new strategies in the progress of new antimicrobial therapies. In this context, different nanosystems with antimicrobial properties have been studied. Specifically, magnetic nanoparticles seem to be very attractive due to their relatively simple synthesis, intrinsic antimicrobial activity, low toxicity and high versatility. Iron oxide NPs (IONPs) was authorized by the World Health Organization for human used in biomedical applications such as in vivo drug delivery systems, magnetic guided therapy and contrast agent for magnetic resonance imaging have been widely documented. Furthermore, the antimicrobial activity of different magnetic nanoparticles has recently been demonstrated. This review elucidates the recent progress of IONPs in drug delivery systems and focuses on the treatment of infectious diseases and target the possible detrimental biological effects and associated safety issues.

Multifunctional nanozymes: enzyme-like catalytic activity combined with magnetism and surface plasmon resonance

Over decades, as alternatives to natural enzymes, highly-stable and low-cost artificial enzymes have been widely explored for various applications. In the field of artificial enzymes, functional nanomaterials with enzyme-like characteristics, termed as nanozymes, are currently attracting immense attention. Significant progress has been made in nanozyme research due to the exquisite control and impressive development of nanomaterials. Since nanozymes are endowed with unique properties from nanomaterials, an interesting investigation is multifunctionality, which opens up new potential applications for biomedical sensing and sustainable chemistry due to the combination of two or more distinct functions of high-performance nanozymes. To highlight the progress, in this review, we discuss two representative types of multifunctional nanozymes, including iron oxide nanomaterials with magnetic properties and metal nanomaterials with surface plasmon resonance. The applications are also covered to show the great promise of such multifunctional nanozymes. Future challenges and prospects are discussed at the end of this review.

Sensors Based on Bio and Biomimetic Receptors in Medical Diagnostic, Environment, and Food Analysis

Analytical chemistry is now developing mainly in two areas: automation and the creation of complexes that allow, on the one hand, for simultaneously analyzing a large number of samples without the participation of an operator, and on the other, the development of portable miniature devices for personalized medicine and the monitoring of a human habitat. The sensor devices, the great majority of which are biosensors and chemical sensors, perform the role of the latter. That last line is considered in the proposed review. Attention is paid to transducers, receptors, techniques of immobilization of the receptor layer on the transducer surface, processes of signal generation and detection, and methods for increasing sensitivity and accuracy. The features of sensors based on synthetic receptors and additional components (aptamers, molecular imprinted polymers, biomimetics) are discussed. Examples of bio- and chemical sensors' application are given. Miniaturization paths, new power supply means, and wearable and printed sensors are described. Progress in this area opens a revolutionary era in the development of methods of on-site and in-situ monitoring, that is, paving the way from the "test-tube to the smartphone".

L. A, Arunkumar P, Ahmed W, Ryu S, Cha SW, Babu KS. Structure dependent luminescence, peroxidase mimetic and hydrogen peroxide sensing of samarium doped cerium phosphate nanorods

Samarium doped cerium phosphate nanorods exhibit enhanced peroxidase mimetic activity and hydrogen peroxide sensing.

Iron Oxide Nanozyme: A Multifunctional Enzyme Mimetic for Biomedical Applications

Iron oxide nanoparticles have been widely used in many important fields due to their excellent nanoscale physical properties, such as magnetism/superparamagnetism. They are usually assumed to be biologically inert in biomedical applications. However, iron oxide nanoparticles were recently found to also possess intrinsic enzyme-like activities, and are now regarded as novel enzyme mimetics. A special term, "Nanozyme", has thus been coined to highlight the intrinsic enzymatic properties of such nanomaterials. Since then, iron oxide nanoparticles have been used as nanozymes to facilitate biomedical applications. In this review, we will introduce the enzymatic features of iron oxide nanozyme (IONzyme), and summarize its novel applications in biomedicine.

Nanozymes in bionanotechnology: from sensing to therapeutics and beyond

Nanozymes are nanomaterials with enzyme-like characteristics, which have found broad applications in various areas including bionanotechnology and beyond.