A reversible fluorescence “off–on–off” sensor for sequential detection of aluminum and acetate/fluoride ions

A captivating approach to elevate the detection of Al3+ ions incorporates the utilization of a tripodal receptor intricately embellishing the surface of zinc oxide

The FDA (Food and Drug Administration, (USA)) lists ZnO as a material that is widely acknowledged to be safe. ZnO NPs with a range of tiny particle sizes were made using the precipitation process. ZnO nanoparticles' surface is embellished with a tripodal sensor containing naphthol units. The assembly with the same receptor decorated on ZnO NPs is contrasted with the cation detection capabilities of the purified tripodal receptor. The UV-visible spectrophotometric analysis was conducted to study the state transitions of the receptor and the decorated ZnO receptor. A positive selectivity to Al3+ cations is determined by the fluorescence study under ideal circumstances. The particle size and surface morphologies are determined by DLS and SEM analysis for the same receptor - TP1 and embellished with a tripodal receptor TP2. Using a fluorescence switch-on Photoinduced Electron Transfer (PET) mechanism, the receptor coated on ZnO detects the presence of Al3+ ions with specificity. The binding constant value was determined using the B-H plot equation. Binding stoichiometry for [TP1-Al3+, TP2-Al3+] showed a 1:1 ratio. The fluorescence switches ON-OFF process of the ZnO surface adorned - TP2 with Tripodal receptor- TP1 was used to create molecular logic gates, which can function as a module for sensors and molecular switches. The addition of Na2EDTA in the solution of the [TP1; TP2 - Al3+] complex resulted in a noticeable reduction in the emission of fluorescence. This finding offers compelling support for the reversibility of the chemosensor. To enable the practical application of this sensor, we have developed a cassette containing receptors TP1 and TP2. Successfully, it can detect Al3+ metal ions. We performed a comprehensive assessment of the dependability and appropriateness of our approach in measuring the concentration of Al3+ ions in wastewater produced by important industrial procedures.

Less interference fluorescence analytical strategy: Bridging substance-triggered ratiometric sensor with convenient preparation and application

High interference and narrow application range are key of bottleneck of recent fluorescence analysis methods, which limit their wide application in the sensing field. Therefore, to overcome these disadvantages, a ratiometric fluorescence sensing system utilizing berberine (BER) and silver nanoclusters protected by dihydrolipoic acid (DHLA-AgNCs) was constructed for the first time in this work, to achieve determination of BER and daunorubicin (Dau). BER aqueous solution (non-planar conformation) has no fluorescence emission. When it was mixed with DHLA-AgNCs, the conformation of BER became planar, producing fluorescence emission at 515 nm besides the fluorescence emission peak of DHLA-AgNCs at 653 nm. With the increase of BER concentration added in system, the fluorescence intensity of BER (planar conformation) at 515 nm increased obviously and the fluorescence intensity of DHLA-AgNCs decreased slightly. Therefore, the dual emission fluorescence sensing system was constructed based on a fluorescence substance and non fluorescence substance, to achieve determination of BER. Meanwhile, based on the bridging effect of BER and fluorescence resonance energy transfer effect from Dau, the altering of two peaks intensity was utilized to achieve determination of Dau. Thus, this dual emission sensing system can not only be used for fluorescence analysis of BER and its analogues, but also based on the bridging effect of BER, allowing the determination of Dau and its analogues that could not be directly measured with silver nanoclusters, expanding the application range of traditional dual emission detection systems. Meanwhile, this system has strong anti-interference ability and low toxicity to the human body and less pollution to the sample and environment. This provides a new direction and universal research strategy for the construction of new fluorescence sensing systems in the future for the analysis of target substances that cannot be directly detected with conventional fluorescence analysis methods.

Organoplatinum Complex Exhibiting Aggregation-Enhanced Emission (AEE) and Dual-Channel Ion-Sensing Properties by Terminating the Molecular Configuration Transformation (MCT) and Excited-State Intramolecular Proton Transfer (ESIPT)

Emitters produce weak emissions when they undergo structural changes such as molecular configuration transformation (MCT) or excited-state intramolecular proton transfer (ESIPT) but give out strong emissions after terminating these distortions. Herein, an organoplatinum complex, Pt-ppy-ABP, carrying a salicylaldehyde-based Schiff base unit is synthesized. It exhibits weak emission in dilute solutions but shows bright emission at the aggregated state or after interacting with F- and Zn2+. This suggests that it has an aggregation-enhanced emission (AEE) property and holds potential in ion detection. Supported by theoretical calculations and femtosecond transient absorption results, this complex suffers excited-state structural changes including MCT from a square-planar configuration to a tetrahedral one, as well as intramolecular rotation of a monodentate ligand and ESIPT, showing weak emission in its solutions. At the aggregated state, it releases strong yellow emissions because of the restraints of MCT and ligand rotation. Upon interacting with F- or Zn2+, it emits bright-red or -green emissions, achieving detection limits of 10-7 M. The sensing mechanism is concluded as deprotonation- and coordination-induced ESIPT terminations, respectively. Given its AEE property and ion-responsive emissions, its application in information encryption is also explored. Finally, these findings should provide valuable clues for the developments of chemosensors with dual-channel recognition abilities.

A Study of Small Molecule-Based Rhodamine-Derived Chemosensors and their Implications in Environmental and Biological Systems from 2012 to 2021: Latest Advancement and Future Prospects

Rhodamine-based chemosensors have sparked considerable interest in recent years due to their remarkable photophysical properties, which include high absorption coefficients, exceptional quantum yields, improved photostability, and significant red shifts. This article presents an overview of the diverse fluorometric, and colorimetric sensors produced from rhodamine, as well as their applications in a wide range of fields. The ability of rhodamine-based chemosensors to detect a wide range of metal ions, including Hg+2, Al3+, Cr3+, Cu2+, Fe3+, Fe2+, Cd2+, Sn4+, Zn2+, and Pb2+, is one of their major advantages. Other applications of these sensors include dual analytes, multianalytes, and relay recognition of dual analytes. Rhodamine-based probes can also detect noble metal ions such as Au3+, Ag+, and Pt2+. They have been used to detect pH, biological species, reactive oxygen and nitrogen species, anions, and nerve agents in addition to metal ions. The probes have been engineered to undergo colorimetric or fluorometric changes upon binding to specific analytes, rendering them highly selective and sensitive by ring-opening via different mechanisms such as Photoinduced Electron Transfer (PET), Chelation Enhanced Fluorescence (CHEF), Intramolecular Charge Transfer (ICT), and Fluorescence Resonance Energy Transfer (FRET). For improved sensing performance, light-harvesting dendritic systems based on rhodamine conjugates has also been explored for enhanced sensing performance. These dendritic arrangements permit the incorporation of numerous rhodamine units, resulting in an improvement in signal amplification and sensitivity. The probes have been utilised extensively for imaging biological samples, including imaging of living cells, and for environmental research. Moreover, they have been combined into logic gates for the construction of molecular computing systems. The usage of rhodamine-based chemosensors has created significant potential in a range of disciplines, including biological and environmental sensing as well as logic gate applications. This study focuses on the work published between 2012 and 2021 and emphasises the enormous research and development potential of these probes.

Triphenylamine-Functionalized Coordination Cage as a Supramolecular Fluorescence Sensor for Sequential Detection of Aluminum Ions and Nitrofurantoin

Coordination cages with a well-defined nanocavity are a class of promising supramolecular materials for molecular recognition and sensing. However, their applications in sequential sensing of multiple types of pollutants are highly desirable yet extremely limiting and challenging. Herein, we demonstrate a convenient strategy to develop a supramolecular fluorescence sensor for sequentially detecting environmental pollutants of aluminum ions and nitrofurantoin. A coordination cage (Ni-NTB), adopting an octahedral structure with triphenylamine chromophores occupying on the faces, is weakly emissive in solution due to the intramolecular rotations of the phenyl rings. Ni-NTB exhibits sensitive and selective fluorescence "off-on-off" processes during consecutive sensing of Al³⁺ and nitrofurantoin, an antibacterial drug. These sequential detection processes are highly interference-tolerant and visually observable with the naked eye. Mechanism studies reveal that the fluorescence switch is controllable by tuning the degree of intramolecular rotations of the phenyl rings and the pathway of intermolecular charge transfer, which is associated with the host-guest interaction. Moreover, the fabrication of Ni-NTB on test strips enabled a quick naked-eye sequential sensing of Al³⁺ and nitrofurantoin in seconds. Hence, this novel supramolecular fluorescence "off-on-off" sensing platform provides a new approach to developing supramolecular functional materials for monitoring environmental pollution.

Perylene tetra-(alkoxycarbonyl) derivative and its copper chelate for selective sensing of fluoride ions

Two novel fluoride ion fluorescent probes (P1 and P2) containing perylene tetra-(alkoxycarbonyl) derivative (PTAC) and its copper chelate were designed and synthesized. The identification properties of the probes were studied by absorption and fluorescence methods. The results showed that the probes were highly selective and sensitive to fluoride ions. ¹H NMR titration confirmed that the sensing mechanism involved the formation of H-bond between the O-H moiety and fluoride ions, and the coordination of copper ion could enhance the H-bond donor capacity of the receptor unit (O-H). The corresponding orbital electron distributions were calculated by density functional theory (DFT). In addition, fluoride ion can be easily detected by probe-coated Whatman filter paper without the need for expensive equipment. Until now, there have been few reports of such probes enhancing the capacity of the H-bond donor based on metal ion chelation. This study will contribute to the design and synthesis of novel sensitive perylene fluoride probes.

Sensitive ratiometric sensor for Al(III) detection in water samples using luminescence or eye-vision

A facile, quick, and sensitive ratiometric luminescence sensor is designed for detection aluminum ions in water samples using luminescence or eye-vision. This approach relies on the emission change of the europium(III) complex with 3-(2-naphthoyl)-1,1,1,-trifluoro acetone (3-NTA) after interaction with various concentration of aluminum ions. The addition of aluminum ions suppressed the Eu(III) emission at 615 nm under 333 nm excitation, while simultaneously enhancing the ligand emission at 480 nm. Optimum detection was obtained in methanol. The quantification of aluminum ions using ratiometric method was determined by plotting the luminescence ratio (F_480nm/F_615nm) versus aluminum ions concentration. The calibration plot was obtained within the range 0.1-100 µM with LOD = 0.27 µM. Additionally, the concentration of aluminum ions can be estimated semi-quantitatively by visually observing the luminescence colour change of the probe from red to light green and then to dark green after being excited by a UV lamp with 365 nm. As far as we are aware, this is the first luminescent lanthanide complex-based ratiometric probe for the detection of aluminum ions. The probe showed remarkable aluminum ions selectivity relative to that of other metal ions. The suggested sensor was used effectively to identify aluminum ions in water samples with good results.

A new Fe3+-selective, sensitive, and dual-channel turn-on probe based on rhodamine carrying thiophenecarboxaldehyde: Smartphone application and imaging in living cells

A new dual-channel probe based on rhodamine B derivative (MSB) was successfully designed, synthesized, characterized by Nuclear Magnetic Resonance (NMR) Spectroscopy, Fourier Transform Infrared Spectrophotometer (FTIR), Matrix Assisted Laser Desorption Ionization Time of Flight Mass Spectrometry (MALDI-TOF MS), X-ray Photoelectron Spectroscopy (XPS), and Single Crystal X-rayDiffraction, and the sensing abilities toward Fe³⁺ cation have been demonstrated and the probe was successfully utilized for fluorescence imaging of Fe³⁺ in living cells. The probe demonstrated quite fast, sensitive, and selective response to Fe³⁺ by causing an extreme enhancement in UV-vis and fluorescence spectroscopy techniques in the buffered aqueous media which makes MSB a dual-channel probe. While the color of MSB solution was initially light yellow, it turned pink in the presence of Fe³⁺, which provided highly selective naked-eye determination among several ions as alkaline, alkaline-earth, and transition metal ions. After that, the probe was easily applied to paper strips and real samples such as drinking waters and supplementary iron tablets for sensing Fe³⁺ in an aqueous solution. The detection limit (LOD) and the response time of the probe were determined as 4.85x10^-9 M and 4 min, respectively, which are quite lower compared with other rhodamine based Fe³⁺ sensors in the literature. According to Job's plot, ¹H NMR titration, MALDI-TOF MS, XPS, and DFT study techniques, the complexation ratio between MSB and Fe³⁺ was found as 1:1. Moreover, the spectral response was reversible with alternately addition of Fe³⁺ or Na₂EDTA to the MSB solution. In addition, fluorescence imaging in NIH/3T3 mouse fibroblast cells and studies in real samples with a quite high recovery rate exhibited that the probe is qualified for detection of Fe³⁺ ion with multiple practical usages.

The spectroscopic and computational study of anthracene based chemosensor - Ag+ interactions

Here in, we demonstrate a selective detection of Ag⁺ ion by the anthracene-based schiff base sensor AMC. The recognition event among sensor AMC and Ag⁺ ion was investigated by enhanced absorption band, red-shifted quenched emission spectra, electrochemical studies and DFT computational studies. The presence of Ag⁺ ion to solution of AMC quenched almost 50 % emission intensity of the ligand band. Data from high-resolution electrospray ionization mass spectrometry (ESI-HRMS), Ag⁺ titrations, and Job's plot studies all show that Ag⁺ binds to AMC in a 1:1 stoichiometric ratio.The quantitative parameters of sensor for silver ion are determined as the limit of detection (LOD) 5.95 × 10^-7 M, and limit of quantitation (LOQ) 1.98 × 10^-8 M in the linear range 3.48-20.31 × 10^-6 M with good association affinity of 5.030 × 10³ M^-1. LMCT phenomenon from insilico studies, is in good agreement with the results obtained from other performed spectroscopic techniques. In addition, this sensor AMC was also successfully applied to real water samples for the identification and measurement of Ag⁺ ions.

A ratiometric fluorescent probe based on a dual-ligand lanthanide metal–organic framework (MOF) for sensitive detection of aluminium and fluoride ions in river and tap water

A dual-emission fluorescent probe towards Al3+ and F− using a Ln-MOF material Eu-BDC-NH2/TDA is employed with exceptional sensitivity, high selectivity, low LOD, excellent anti-interference characteristics and direct visual observation.

Phenanthridine based rapid "turn-on" fluorescent sensor for selective detection of Th4+ ion and its real-time application

A new and highly sensitive and selective phenanthridine based sensor, 9-(7,8,13,14-tetrahydrodibenzo[a,i]phenanthridin-5-yl)benzo[h]quinolin-10-ol (PHBQ), was developed for the fluorescent ''turn-on'' detection of Th⁴⁺ ion in acetonitrile: water (8:2) medium. The fluorescence intensity of PHBQ diminished in the region of pH 1 to 3 and could be recovered by adjusting the pH to above 4. The sensor PHBQ showed distinct spectral changes in response to Th⁴⁺ ion over other competitive metal ions. The fluorescence displayed good linearity with the Th⁴⁺ concentration in the equivalence of 0-0.5 equivalents. The detection limit was calculated to be as low as 99 nM, which was less than that of previously reported sensors. The recognizing mechanism of PHBQ towards Th⁴⁺ was investigated in detail using HR-MS, NMR, and IR spectroscopy. The economically viable Whatman filter paper was fabricated with PHBQ to develop a paper-based fluorescence kit to detect the Th⁴⁺ in an aqueous medium efficiently. Furthermore, the application of sensor ligand in fluorescence imaging was studied in E-coli cells due to its minimal cytotoxicity and good optical properties. The obtained data suggest that the ligand PHBQ can be used as a fluorescent sensor for tracking Th⁴⁺ in multiple applications.

A novel colorimetric and fluorescent probe based on a core-extended perylene tetra-(alkoxycarbonyl) derivative for the selective sensing of fluoride ions

A novel fluoride (F⁻) colorimetric and fluorescent probe (P1) based on a core-extended perylene tetra-(alkoxycarbonyl) (PTAC) derivative was developed. The probe exhibited high sensitivity and selectivity for distinguishing F⁻ from other common anions through significant changes of the UV-Vis and fluorescence spectra. Job's plot analysis revealed that the stoichiometry of the P1–F⁻ interaction is 1 : 1. The association constant between P1 and F⁻ was estimated to be 9.7 × 10² M⁻¹ and the detection limit of F⁻ was about 0.97 μM. An approximately 76 nm red-shift in the absorption and fluorescent quenching response was observed when F⁻ was associated with P1. The emission intensity (I₅₇₄) decreased linearly along with the F⁻ concentration from 3 × 10⁻⁵ M to 2 × 10⁻⁴ M. The mechanism of intermolecular proton transfer (IPT) was deduced based on the changes in the absorption, fluorescence, electrochemistry, and ¹H NMR titration spectra. The density functional theory (DFT) theoretical results of the P1–F⁻ complex are in good agreement with the experimental results. The rapid detection of F⁻ ions in the solid state and living cells was also studied.

A colorimetric and fluorescent probe based on a nuclear extended perylene tetra-(alkoxycarbonyl) derivative can be used for the detection of F⁻ in liquid, solid and living cells.

A multi-colorimetric probe to discriminate between heavy metal cations and anions in DMSO-H2O with high selectivity for Cu2+ and CN-: study of logic functions and its application in real samples

A ditopic multi-colorimetric probe based on the phenylpridyl-thioic moiety (EN) was synthesized via a Schiff base reaction mechanism and characterized using ¹H NMR and UV-vis spectroscopy. The colorimetric analyses carried out revealed that EN was capable of discriminating between a number of heavy metal cations via coordination induced charge transfer, as well as between anions through hydrogen bonding induced charge transfer, in DMSO–H₂O (9 : 1). In particular, the ditopic probe could spectrally and colorimetrically recognize the most toxic heavy metal cations of Cd²⁺, Pb²⁺ and Hg²⁺, among others, in DMSO–H₂O. Additionally, EN was selective and sensitive to the presence of CN⁻, F⁻, AcO⁻ and H₂PO₄⁻ in the same solvent system as cations. The reversibility and reproducibility studies showed that EN exhibited complementary IMP/INH logic functions, based on colour and spectral switching (ON/OFF), modulated by F⁻/Al³⁺. The real time application of the probe was tested on food grade products to detect the presence of F⁻ in toothpastes and mouthwash dissolved in water, as well as cations in underground water (normally saline), which displayed substantial responses. Thus, EN displayed an excellent scope of response and can thus be developed for real time sensing kits, which could be used instantly in on-field analysis. Theoretical studies were conducted to complement the experimental work.

A ditopic multi-colorimetric probe based on the phenylpridyl-thioic moiety (EN) was synthesized via a Schiff base reaction mechanism and characterized using ¹H NMR and UV-vis spectroscopy.

Potent Acrylamide Determination in Food Products Using Ion-Selective Electrode Technique

A potent selective acrylamide liquid sensor based on the reaction of acrylamide with 2-(5-Bromo-2-pyridylazo)-5-[N-n-Propyl-N-(3-Sulfopropyl) amino] aniline reagent is successfully designed. The characteristics slope (52.33 mV/decade), linearity usable range from 1.0 × 10⁻⁷–1.0 × 10⁻¹ molar, limit of detection (1.6 × 10⁻⁸) molar, selectivity attitude to several inorganic cations, amino acids and sugars, time of response (8 s), lifetime (four months), pH effect on the electrode potential and the basic validation parameters were studied. The desirable pH applicable range was 3.0–6.5, and the restraint of the developed sensor is independent on this working pH range. The deployed electrode was effectively applied for rapid inexpensive analysis of acrylamide cations in food products with comparison to high-performance liquid chromatographic method and the results were agreeable with each other. The obtained data by the suggested electrode were treated statistically and compared with the various recently published acrylamide sensors.

Penicillin biosensor based on rhombus-shaped porous carbon/hematoxylin/penicillinase

In this experiment, we designed an electrochemical sensor using penicillinase (Pen X)-rhombus porous carbon (RPC) as the detection element and hematoxylin as the indicator to detect low concentrations of penicillin sodium (Pen G). A differential pulse voltammetry (DPV) method was used to detect Pen G in the concentration range of 10^-8 -10^-5 mg·mL^-1 under optimal experimental conditions. The results showed that the peak current value and the logarithm of Pen G concentration showed a good linear relationship (R² = 0.9915), and the LOD was 2.68 × 10^-7 mg·mL^-1 (S/N = 3). The actual milk samples were detected by the addition method and compared with the high-performance liquid phase method; no significant difference was found in the detection results. The working electrode prepared by cross-linking method not only extends the service life of the sensor, but also improves the sensitivity and reproducibility of the sensor. It can also be used to detect the Pen G residue in the actual milk samples repeatedly. PRACTICAL APPLICATION: In this study, an electrochemical sensor for the rapid detection of penicillin sodium in milk was prepared, which has good sensitivity and fast detection speed.

A naphthyl thiourea-based effective chemosensor for fluorescence detection of Ag+ and Zn2

A naphthyl thiourea-based effective chemosensor HNC, (E)-2-(2-hydroxy-3-methoxybenzylidene)-N-(naphthalen-1-yl)hydrazine-1-carbothioamide, was synthesized. HNC showed quick responses toward Ag⁺ and Zn²⁺ through marked fluorescence turn-on in different solvent conditions, respectively. Binding proportions of HNC to Ag⁺ and Zn²⁺ were found to be 2:1 and 1:1, respectively. Detection limits of HNC for Ag⁺ and Zn²⁺ were calculated as 3.82 and 0.21 μM. Binding processes of HNC for Ag⁺ and Zn²⁺ were represented using Job's plot, DFT, ¹ H NMR titration, and ESI-MS.

Fluorescence 'turn-on' probe for Al3+ detection in water based on ZnS/ZnO quantum dots with excellent selectivity and stability

In this work, an efficient and stable fluorescent probe for Al³⁺was established. The fluorescent probe based on the fluorescence 'turn-on' mode of zinc sulfide crystal composite zinc oxide quantum dots (ZnS/ZnO QDs). The ZnS/ZnO QDs were synthesized via two-step method using L-Cysteine (L-Cys) as a sulfur source and stabilizer. In the synthesis of ZnS/ZnO QDs, the fluorescence of zinc oxide quantum dots (ZnO QDs) decreased and its stability increased in aqueous solution after the addition of L-Cys. In addition, the as-synthesized ZnS/ZnO QDs shows fluorescent enhancement to Al³⁺. The ZnS/ZnO QDs based fluorescence 'turn-on' probe presented wide linear ranges (1 nM-8μM and 8-100μM). The availability of as-established sensing probe was also estimated by real water sample tests. Furthermore, the fluorescent enhancing mechanism was carried out by recording the fluorescent lifetime of samples, which might be related to the QDs dispersion and charge transfer weaken.

Two cyanoethylene-based fluorescence probes for highly efficient cyanide detection and practical applications in drinking water and living cells

Cyanide detection methods are urgently needed due to the highly lethal to human beings. Herein, we report two fluorescence probes (Probe 1 and Probe 2) based on cyanoethylene group for cyanide anion (CN^-) detection. The selective recognition for CN^- was confirmed by the completely opposite green fluorescence of Probe 1 and red fluorescence of Probe 2 observed by fluorescence spectra and naked eyes. The probes take advantages of the large Stokes shift (~160 nm), rapid response (30 s), anti-interference performance and low detection limit (Probe 1: 12.4 nM, Probe 2: 101 nM). The sensing mechanism is certificated to the nucleophilic attack of CN^- to electron-deficient cyanoethylene group of probes, which was demonstrated by ¹H NMR titration, HR-MS, Job's plot and IR spectroscopy. Density functional theory (DFT) calculations were carried out to analyze the mechanism in theory. Further, practical applications were studied. Easy-to-use test strips treated with Probe 1 or Probe 2 are capable of CN^- detection in pure drinking water. The good biocompatibility and membrane penetrability have achieved the bioimaging capability of Probe 1 and Probe 2 in living HepG-2 cells, making the probes promising for use in real lives.

Two-dimensional nano-layered materials as multi-responsive chemosensors constructed by carbazole- and fluorene-based polyaniline-like derivatives

The development of multi-responsive chemosensors has a bright application prospect in environmental monitoring and biological diagnosis. In this paper, we report two kinds of fluorescent polyaniline-like derivatives containing of carbazole or fluorene moieties with two-dimensional (2D) nano-layered structure and their applications in the detection of Al³⁺, Fe³⁺, Cu²⁺ and HCl in different environments. Through the analysis of the structure and properties of these two 2D materials, we find that the prepared (Poly(9,9'-(9,9-dihexyl-9H-fluorene-2,7-diyl)bis(9H-carbazol-3-amine))) PDFCA material performs excellent sensing properties for above analytes. Relevant density functional theory (DFT) calculation further confirms the potential application of 2D nano-layered PDFCA material in sensing field. This study presents that 2D nano-layered PDFCA material is considerably competitive in the development of multi-responsive chemosensors, and it will greatly accelerate the research of 2D polymer materials.

A chromo-fluorogenic HMT sensor for Ag+ and the resultant HMT-Ag complex turn-off probe for F- in DMSO: experimental and theoretical studies

The photophysical properties of Hexamethylenetetramine (HMT) were investigated through physical methods and spectroscopically in dimethyl sulfoxide (DMSO) at ambient temperature. Evidently, HMT turned out as a sensor, selective and sensitive to silver ion (Ag⁺) only, among other cations, through colorimetric and fluorometric activities (observable by naked eye) and spectrally, both by UV-Vis and fluorescence spectroscopy. The resulting complex pedant (HMT-Ag) is highly responsive to the presence of fluoride ion (F⁻) in aqueous soluble DMSO, evidenced by changes in absorption spectra as well as fluorescence quenching, upon addition of the respective ions. Consequently, spectral changes induced by the addition of these ions, were consistently concomitant with colour changes, from colourless to light brown (HMT-Ag) to dark brown (HMT-Ag-F) in daylight condition, while bright light blue colour (HMT) to dark blue brownish (HMT-Ag) under UV-light conditions. The experimental results were complimented by theoretical studies, which are well within agreement of one another.

Highly selective fluorescent peptide-based chemosensors for aluminium ions in aqueous solution

Two novel fluorescent peptide-based chemosensors, including A (2-amino-benzoyl-Ser-Glu-Glu-NH₂) and B (2-amino-benzoyl-Ala-Glu-Pro-Glu-Ala-Glu-Pro-NH₂) were synthesized and characterized by nuclear magnetic resonance (NMR) spectra. These fluorescent probes exhibited excellent selective and sensitive responses to Al³⁺ ions over other metal ions in aqueous buffered solutions. The limits of detection for both chemosensors towards the Al³⁺ ions were in the order of ∼10^-7 M (A: 155 nM and B: 195 nM), which clearly indicates that these probes have significant potential for biological applications. They also displayed high binding affinity (1.3029 × 10⁴ M^-1 and 1.7586 × 10⁴ M^-1 relevant to A and B respectively). These two chemosensors are great analytical probes that produce turn-on responses upon binding to Al³⁺ ions through an intramolecular charge transfer (ICT) mechanism. In addition, the application of both chemosensors was examined over a wide range of pH. The fluorescent peptide-based probes and Al³⁺ form a 1:1 coordination complex according to the ESI-MS and Job's plot analysis. Notably, upon addition of Al³⁺ to these chemosensors, a fluorescence enhancement of approximately 8-fold was observed and the binding mode was determined using NMR titration and fluorescence emission data.

Simultaneous electrochemical sensing of dihydroxy benzene isomers at cost-effective allura red polymeric film modified glassy carbon electrode

Background

A simple and simultaneous electrochemical sensing platform was fabricated by electropolymerization of allura red on glassy carbon electrode (GCE) for the interference-free detection of dihydroxy benzene isomers.

Methods

The modified working electrode was characterized by electrochemical and field emission scanning electron microscopy methods. The modified electrode showed excellent electrocatalytic activity for the electrooxidation of catechol (CC) and hydroquinone (HQ) at physiological pH of 7.4 by cyclic voltammetric (CV) and differential pulse voltammetric (DPV) techniques.

Results

The effective split in the overlapped oxidation signal of CC and HQ was achieved in a binary mixture with peak to peak separation of 0.102 V and 0.103 V by CV and DPV techniques. The electrode kinetics was found to be adsorption-controlled. The oxidation potential directly depends on the pH of the buffer solution, and it witnessed the transfer of equal number of protons and electrons in the redox phenomenon.

Conclusions

The limit of detection (LOD) for CC and HQ was calculated to be 0.126 μM and 0.132 μM in the linear range of 0 to 80.0 μM and 0 to 110.0 μM, respectively, by ultra-sensitive DPV technique. The practical applicability of the proposed sensor was evaluated for tap water sample analysis, and good recovery rates were observed.

Graphical abstract

Electrocatalytic interaction of ALR/GCE with dihydroxy benzene isomers.

A Simple Method for Developing a Hand-Drawn Paper-Based Sensor for Mercury; Using Green Synthesized Silver Nanoparticles and Smartphone as a Hand-Held-Device for Colorimetric Assay

Mercury ions are highly toxic at trace levels, and its pollution has posed a significant threat to the environment and public health, where current detection methods mainly require laborious operation and expensive instrumentation. Herein, a simple, cost-effective, instrument-free approach for selective detection of Hg2+ based on a hand-drawn paper-based naked-eye colorimetric device is developed. To develop a hand-drawn paper-based device, a crayon is used to build hydrophobic barriers and a paper puncher is applied to obtain patterns as a sensing zone. A green method for the synthesis of silver nanoparticles (AgNPs) is applied using Achillea Wilhelmsii (Aw) extract. The sensing ability of Aw-AgNPs toward Hg2+ is investigated in both solution-phase and paper substrate loaded with Aw-AgNPs using colorimetric methods. For the paper-based sensor, the quantification of the target relies on the visual readout of a color-changed sensing zone modified with Aw-AgNPs. Under optimal conditions, the color of Aw-AgNPs in aqueous solution and on the coated paper substrate can change from brown to colorless upon addition of target, with a detection limit of 28 × 10-9 m and 0.30 × 10-6 m, respectively. In conclusion, the present study indicates the potential of this hand-drawn eco-friendly paper-based sensor for monitoring of mercury.

Coupled with EDDS and approaching anode technique enhanced electrokinetic remediation removal heavy metal from sludge

In this work, the novel technology was used to remove heavy metal from sludge. The coupled with biodegradable ethylenediamine disuccinic acid (EDDS) and approaching anode electrokinetic (AA-EK) technique was used to enhance heavy metal removing from sludge. Electric current, sludge and electrolyte characteristics, heavy metal removal efficiency and residual content distribution, and heavy metal fractions percentage of variation were evaluated during the electrokinetic remediation process. Results demonstrated that the coupled with EDDS and AA-EK technique obtain a predominant heavy metal removal efficiency, and promote electric current increasing during the enhanced electrokinetic remediation process. The catholyte electrical conductivity was higher than the anolyte, and electrical conductivity of near the cathode sludge achieved a higher value than anode sludge during the coupled with EDDS and AA-EK remediation process. AA-EK technique can produce a great number of H⁺, which caused the sludge acidification and pH decrease. Cu, Zn, Cr, Pb, Ni and Mn obtain the highest extraction efficiency after the coupled with EDDS and AA-EK remediation, which were 52.2 ± 2.57%, 56.8 ± 3.62%, 60.4 ± 3.62%, 47.2 ± 2.35%, 53.0 ± 3.48%, 54.2 ± 3.43%, respectively. Also, heavy metal fractions analysis demonstrated that the oxidizable fraction percentage decreased slowly after the coupled with EDDS and AA-EK remediation.

Conventional and Nanotechnology-Based Sensing Methods for SARS Coronavirus (2019-nCoV)

Ongoing pandemic coronavirus (COVID-19) has affected over 218 countries and infected 88,512,243 and 1,906,853 deaths reported by Jan. 8, 2021. At present, vaccines are being developed in Europe, Russia, USA, and China, although some of these are in phase III of trials, which are waiting to be available for the general public. The only option available now is by vigorous testing, isolation of the infected cases, and maintaining physical and social distances. Numerous methods are now available or being developed for testing the suspected cases, which may act as carriers of the virus. In this review, efforts have been made to discuss the conventional as well as fast, rapid, and efficient testing methods developed for the diagnosis of 2019-nCoV.Testing methods can be based on the sensing of targets, which include RNA, spike proteins and antibodies such as IgG and IgM. Apart from the development of RNA targeted PCR, antibody and VSV pseudovirus neutralization assay along with several other diagnostic techniques have been developed. Additionally, nanotechnology-based sensors are being developed for the diagnosis of the virus, and these are also discussed.