Determination of high-molecular weight polycyclic aromatic hydrocarbons in high performance liquid chromatography fractions of coal tar standard reference material 1597a via solid-phase nanoextraction and laser-excited time-resolved Shpol'skii spectroscopy

Simultaneous determination of methadone and tramadol in serum samples by ultrasonic-assisted micro solid phase extraction and gas chromatography-mass spectrometry

Ultrasonic-assisted dispersive micro solid phase extraction (UA-DMSPE) is proposed as a fast and easy technique for the extraction and preconcentration of methadone and tramadol from serum samples. Different sorbents including carbon nanotubes, oxidized carbon nanotubes, and TiO2 nanoparticles were compared to extract methadone and tramadol. The best performance was obtained using oxidized carbon nanotubes due to the strong affinity between the drugs and carbon nanotube adsorbents. Final analysis of drugs performed by using gas chromatography-mass spectrometric detection. Different parameters affecting the extraction efficiency, such as the sample volume, amount of adsorbent, desorption solvent type and volume, centrifugation time, and speed were investigated and optimized. The striking features of this technique are correlated to its speed and the small volumes of sample (about 1 mL), desorption solvent (about 50 μL), and adsorbent (about 0.001 g) for analysis of drugs, and finally, milder centrifugation conditions relative to the previously reported adsorbent. The optimal parameters were achieved as follows: pH value was set at 9, the sample volume was adjusted to 1200 µL, the amount of adsorbent used was 1 mg, the extraction time was set at 5 min, and the volume of the desorption solvent was adjusted to 50 µL. The limits of detections (0.5 and 0.8 ng mL-1) and quantifications (1.5 and 2.5 ng mL-1) were obtained for methadone and tramadol, respectively. The developed method also showed good repeatability, relative standard deviation (RSD) of 9.49 % and 7.47 % (n = 5), for the spiked aqueous solution at the concentration level of 10, 50, and 100 ng mL-1 for analytes, and linearity, R ≥ 0.9809. The results showed that UA-DMSPE is a quick, relatively inexpensive, and environmentally friendly alternative technique for the extraction of opiate drugs from serum samples.

Chromatographic and spectroscopic analysis of Dibenzo[b,l]Fluoranthene and its determination in SRM 1597a by laser-excited time-resolved Shpol'skii spectroscopy

BACKGROUND

Polycyclic aromatic hydrocarbons (PAHs) with molecular mass 302 Da are the most investigated PAHs within the high molecular weight PAHs class. This PAH class contributes to a significant portion of the mutagenic and/or carcinogenic response associated to the PAH fraction present in environmental and combustion-related samples. Several reasons prevent the routine analysis of 302 Da PAHs in environmental samples, including large number of possible isomers, limited number of commercially available reference standards, and low concentration levels.

RESULTS

These studies search for a newly synthetized dibenzo-fluoranthene of molecular mass 302 Da, namely dibenzo[b,l]fluoranthene, in a standard reference material (SRM 1597a) from the National Institute of Standards and Technology. The eluting behavior of dibenzo[b,l]fluoranthene is investigated under reversed-phase liquid chromatographic conditions for its determination via absorption and fluorescence detection. Vibrationally resolved spectra and fluorescence lifetimes recorded from octane matrices at 77 K and 4.2 K allow for its qualitative and quantitative analysis at the parts-per-trillion concentration levels. Its unambiguous determination is then reported for the first time in the SRM 1597a.

SIGNIFICANCE AND NOVELTY

Of the 89 possible 302 Da PAH isomers, only 23 isomers have been identified in SRMs and/or environmental samples. The determination of dibenzo[b,l]fluoranthene in the SRM 1597a takes a step forward to fulfilling this gap.

On the co-elution of benzo[a]pyrene and dibenzo[a,l]pyrene in chromatographic fractions and their unambiguous determination in tobacco extracts via laser-excited time resolved Shpol'skii spectroscopy

High performance liquid chromatography is widely used for the analysis of polycyclic aromatic hydrocarbons in a wide variety of samples. Of particular concern are benzo[a]pyrene and dibenzo[a,l]pyrene, two of the most toxic polycyclic aromatic hydrocarbons ever tested. Under EPA method 610, these two compounds co-elute with almost identical retention times. Our studies demonstrate the feasibility of directly determining them in a chromatographic fraction without further separation. Their unambiguous determination is based on spectral and lifetime information with a two-step experimental procedure consisting of the evaporation of the chromatographic fraction followed by the dissolution of the residue with microliters of n-octane. With the aid of a 77 K fiber optic probe, limits of detection at the parts-per-billion concentration level (ng mL^-1) are obtained from the microliter sample via laser excited time resolved Shpol'skii spectroscopy. This approach is then applied to the analysis of benzo[a]pyrene and dibenzo[a,l]pyrene in tobacco extracts.

Polycyclic aromatic hydrocarbons (PAHs): Updated aspects of their determination, kinetics in the human body, and toxicity

Polycyclic aromatic hydrocarbons (PAHs) are legacy pollutants of considerable public health concern. Polycyclic aromatic hydrocarbons arise from natural and anthropogenic sources and are ubiquitously present in the environment. Several PAHs are highly toxic to humans with associated carcinogenic and mutagenic properties. Further, more severe harmful effects on human- and environmental health have been attributed to the presence of high molecular weight (HMW) PAHs, that is PAHs with molecular mass greater than 300 Da. However, more research has been conducted using low molecular weight (LMW) PAHs). In addition, no HMW PAHs are on the priority pollutants list of the United States Environmental Protection Agency (US EPA), which is limited to only 16 PAHs. However, limited analytical methodologies for separating and determining HMW PAHs and their potential isomers and lack of readily available commercial standards make research with these compounds challenging. Since most of the PAH kinetic data originate from animal studies, our understanding of the effects of PAHs on humans is still minimal. In addition, current knowledge of toxic effects after exposure to PAHs may be underrepresented since most investigations focused on exposure to a single PAH. Currently, information on PAH mixtures is limited. Thus, this review aims to critically assess the current knowledge of PAH chemical properties, their kinetic disposition, and toxicity to humans. Further, future research needs to improve and provide the missing information and minimize PAH exposure to humans.

Advances in Chemical Analysis of Oil Spills Since the Deepwater Horizon Disaster

Analytical techniques for chemical analysis of oil, oil photochemical and biological transformation products, and dispersants and their biodegradation products benefited significantly from research following the 2010 Deepwater Horizon (DWH) disaster. Crude oil and weathered-oil matrix reference materials were developed based on the Macondo well oil and characterized for polycyclic aromatic hydrocarbons, hopanes, and steranes for use to assure and improve the quality of analytical measurements in oil spill research. Advanced gas chromatography (GC) techniques such as comprehensive two-dimensional GC (GC × GC), pyrolysis GC with mass spectrometry (MS), and GC with tandem MS (GC-MS/MS) provide a greater understanding at the molecular level of composition and complexity of oil and weathering changes. The capabilities of high-resolution MS (HRMS) were utilized to extend the analytical characterization window beyond conventional GC-based methods to include polar and high molecular mass components (>400 Da) and to provide new opportunities for discovery, characterization, and investigation of photooxidation and biotransformation products. Novel separation approaches to reduce the complexity of the oil and weathered oil prior to high-resolution MS and advanced fluorescence spectrometry have increased the information available on spilled oil and transformation products. HRMS methods were developed to achieve the required precision and sensitivity for detection of dispersants and to provide molecular-level characterization of the complex surfactants. Overall, research funding following the DWH oil spill significantly advanced and expanded the use of analytical techniques for chemical analysis to support petroleum and dispersant characterization and investigations of fate and effects of not only the DWH oil spill but future spills.

Low-temperature time-resolved phosphorescence excitation emission matrices for the analysis of phenanthro-thiophenes in chromatographic fractions of complex environmental extracts

The present study investigates the analytical potential of low-temperature photoluminescence spectroscopy for the analysis of seven phenanthrothiophenes with molecular mass 234 g mol^-1. The studied PASHs include Phenanthro [1,2-b]thiophene, Phenanthro [2,1-b]thiophene, Phenanthro [2,3-b]thiophene, Phenanthro [3,2-b]thiophene, Phenanthro [3,4-b]thiophene, Phenanthro [4,3-b]thiophene and Phenanthro [9,10-b]thiophene. Excitation and emission spectra recorded from n-alkane solutions at room temperature, 77 K and 4.2 K show phosphorescence emission from all the studied isomers at cryogenic temperatures. The analytical figures of merit obtained under steady state (fluorescence) and time-resolved (phosphorescence) conditions provide limits of detection at the parts-per-billion (ng mL^-1) concentration levels. Processing 77 K and 4.2 K phosphorescence data with parallel factor analysis showed to be a robust approach to the determination of phenanthro-thiophenes in complex fluorophore mixtures.

Instrumental improvements for the trace analysis of structural isomers of polycyclic aromatic hydrocarbons with molecular mass 302 Da

Polycyclic aromatic hydrocarbons (PAHs) are some of the most common environmental pollutants encountered worldwide. Eco-toxicological studies attribute a significant portion of the biological activity of PAH contaminated samples to the presence of high molecular weight PAHs (HMW-PAHs), i.e. PAHs with molecular mass (MM) greater than 300 Da. The research presented here focuses on the analysis of PAH isomers of MM 302 Da. This is not a trivial task. There are 23 isomers with MM 302 Da available to commercial and academic researchers. Many of them are difficult to separate in the chromatographic column and have virtually identical fragmentation patterns. The selectivity of HPLC absorption and fluorescence detectors is modest for resolving co-eluting isomers. Previous work in our lab demonstrated the potential of laser excited time-resolved Shpol'skii spectroscopy (LETRSS) for the analysis of 302 Da isomers in HPLC fractions. The main limitation of the technique was instrumental and due to the narrow range of excitation wavelengths of the tunable dye laser used for sample excitation. Herein, we remove this limitation with an optical parametric oscillator (OPO)-based wavelength tuning laser that covers the whole excitation range of 302 Da isomers. It is possible now to excite each isomer at its excitation wavelength for maximum fluorescence emission and reach limits of detection at the parts-per-trillion level (pg.mL^-1). The excitation bandwidth of the OPO laser (0.2 nm) is a good match for the narrow excitation spectra of 302 Da isomers in n-octane. This feature, associated to unique vibrational fluorescence profiles and lifetime decays, allows for the unambiguous identification of co-eluting isomers in RPLC fractions. The same is true for their quantitative analysis in coal tar samples.

Selective and effective separation of five condensed arenes from a high-temperature coal tar by extraction combined with high pressure preparative chromatography

An environmentally benign and cost-effective method was designed for isolating and purifying condensed arenes from acetone-extractable portion (AEP) of a high-temperature coal tar through a high pressure preparative chromatograph (HPPC) with different packings, including silica gel, octadecyl silane, octyl bonded silica gel, and diol bonded silica gel. In total, 196 compounds were detected with a gas chromatograph/mass spectrometer from AEP and its eluates. From the eluates, naphthalene, anthracene, phenanthrene, fluoranthene, and pyrene were successfully isolated and purified, and their structures were confirmed by their ¹H and ¹³C nuclear magnetic resonance spectra in addition to their mass spectra. Extraction-HPPC device and solvent recovery process were designed and developed, which can potentially be applied to industrial production because the process is easy-to-operate and ecofriendliness. In addition, the solvents used can be easily recovered and reused, and neither waste water nor other pollutions are emitted.

Qualitative characterization of three combustion-related standard reference materials for polycyclic aromatic sulfur heterocycles and their alkyl-substituted derivatives via normal-phase liquid chromatography and gas chromatography/mass spectrometry

The research described here provides the most comprehensive qualitative characterization of three combustion-related standard reference materials (SRMs) for polycyclic aromatic sulfur heterocycles (PASHs) and some alkyl-substituted (alkyl-) derivatives to date: SRM 1597a (coal tar), SRM 1991 (coal tar/petroleum extract), and SRM 1975 (diesel particulate extract). An analytical approach based on gas chromatography/mass spectrometry (GC/MS) is presented for the determination of three-, four-, and five-ring PASH isomers and three- and four-ring alkyl-PASHs in the three SRM samples. The benefit of using a normal-phase liquid chromatography (NPLC) fractionation procedure prior to GC/MS analysis was demonstrated for multiple isomeric PASH groups. Using a semi-preparative aminopropyl (NH2) LC column, the three combustion-related samples were fractionated based on the number of aromatic carbon atoms. The NPLC-GC/MS method presented here allowed for the following identification breakdown: SRM 1597a - 35 PASHs and 59 alkyl-PASHs; SRM 1991-31 PASHs and 58 alkyl-PASHs; and SRM 1975-13 PASHs and 25 alkyl-PASHs. These identifications were based on NPLC retention data, the GC retention times of reference standards, and the predominant molecular ion peak in the mass spectrum. Prior to this study, only 11, 1, and 0 PASHs/alkyl-PASHs had been identified in SRM 1597a, SRM 1991, and SRM 1975, respectively. Graphical abstract NPLC-GC/MS analysis for the three- and four-ring parent PASH isomers in SRM 1597a.

Spectral characterization of the fluorescent components present in humic substances, fulvic acid and humic acid mixed with pure benzo(a)pyrene solution

The fate of benzo(a)pyrene (BaP), a ubiquitous contaminant reported to be persistent in the environment, is largely controlled by its interactions with the soil organic matter. In the present study, the spectral characteristics of fluorophores present in the physical fractions of the soil organic matter were investigated in the presence of pure BaP solution. After extraction of humic substances (HSs), and their fractionation into fluvic acid (FA) and humic acid (HA), two fluorescent compounds (C₁ and C₂) were identified and characterized in each physical soil fraction, by means of fluorescence excitation-emission matrices (FEEMs) and Parallel Factor Analysis (PARAFAC). Then, to each type of fraction having similar DOC content, was added an increasing volume of pure BaP solution in attempt to assess the behavior of BaP with the fluorophores present in each one. The application of FEEMs-PARAFAC method validated a three-component model that consisted of the two resulted fluorophores from HSs, FA and HA (C₁ and C₂) and a BaP-like fluorophore (C₃). Spectral modifications were noted for components C₂HSs (C₂ in humic substances fraction) (λex/λem: 420/490-520 nm), C₂FA (C₂ in fulvic acid fraction) (λex/λem: 400/487(517) nm) and C₁HA (C₁ in humic acid fraction) (λex/λem: 350/452(520) nm). We explored the impact of increasing the volume of the added pure BaP solution on the scores of the fluorophores present in the soil fractions. It was found that the scores of C₂HSs, C₂FA, and C₁HA increased when the volume of the added pure BaP solution increased. Superposition of the excitation spectra of these fluorophores with the emission spectrum of BaP showed significant overlaps that might explain the observed interactions between BaP and the fluorescent compounds present in SOM physical fractions.

Four-dimensional data coupled to alternating weighted residue constraint quadrilinear decomposition model applied to environmental analysis: Determination of polycyclic aromatic hydrocarbons

Qualitative and quantitative analysis of polycyclic aromatic hydrocarbons (PAHs) was carried out by three-dimensional fluorescence spectroscopy combining with Alternating Weighted Residue Constraint Quadrilinear Decomposition (AWRCQLD). The experimental subjects were acenaphthene (ANA) and naphthalene (NAP). Firstly, in order to solve the redundant information of the three-dimensional fluorescence spectral data, the wavelet transform was used to compress data in preprocessing. Then, the four-dimensional data was constructed by using the excitation-emission fluorescence spectra of different concentration PAHs. The sample data was obtained from three solvents that are methanol, ethanol and Ultra-pure water. The four-dimensional spectral data was analyzed by AWRCQLD, then the recovery rate of PAHs was obtained from the three solvents and compared respectively. On one hand, the results showed that PAHs can be measured more accurately by the high-order data, and the recovery rate was higher. On the other hand, the results presented that AWRCQLD can better reflect the superiority of four-dimensional algorithm than the second-order calibration and other third-order calibration algorithms. The recovery rate of ANA was 96.5%~103.3% and the root mean square error of prediction was 0.04μgL^-1. The recovery rate of NAP was 96.7%~115.7% and the root mean square error of prediction was 0.06μgL^-1.

Determination of polycyclic aromatic hydrocarbons with molecular mass 302 in Standard Reference Material 1597a by reversed-phase liquid chromatography and stop-flow fluorescence detection

The identification of isomeric polycyclic aromatic hydrocarbons (PAHs) in complex samples via reversed-phase liquid chromatography (RPLC) with fluorescence detection (FL) is normally based on matching the chromatographic retention times of suspected peaks of interest with reference standards. Since no spectral information is obtained during the chromatographic run, the accurate identification of co-eluting PAHs with similar chromatographic behaviors requires confirmation with additional chromatographic methods. This is particularly true for the analysis of PAH isomers with the relative molecular mass (MM, g/mol) 302. The work presented here explores the information content of room-temperature fluorescence spectra for the analysis of PAHs with MM 302 in the Standard Reference Material (SRM) 1597a. Fluorescence spectra were recorded under stop-flow conditions with the aid of a commercial HPLC system. Of the 21 MM 302 PAHs known to be present in the SRM 1597a, 20 were tentatively identified based on retention times and the presence of 18 was confirmed based on excitation and emission spectral profiles.

Qualitative characterization of SRM 1597a coal tar for polycyclic aromatic hydrocarbons and methyl-substituted derivatives via normal-phase liquid chromatography and gas chromatography/mass spectrometry

A normal-phase liquid chromatography (NPLC) fractionation procedure was developed for the characterization of a complex mixture of polycyclic aromatic hydrocarbons (PAHs) from a coal tar sample (Standard Reference Material (SRM) 1597a). Using a semi-preparative aminopropyl (NH₂) LC column, the coal tar sample was separated using NPLC based on the number of aromatic carbons; a total of 14 NPLC fractions were collected. SRM 1597a was analyzed before and after NPLC fractionation by using gas chromatography/mass spectrometry (GC/MS) with a 50% phenyl stationary phase. The NPLC-GC/MS method presented in this study allowed for the identification of 72 PAHs and 56 MePAHs. These identifications were based on the NPLC retention times for authentic reference standards, GC retention times for authentic reference standards, and the predominant molecular ion peak in the mass spectrum. Most noteworthy was the determination of dibenzo[a,l]pyrene, which could not be measured directly by GC/MS because of low concentration and co-elution with dibenzo[j,l]fluoranthene. The NPLC-GC/MS procedure also allowed for the tentative identification of 74 PAHs and 117 MePAHs based on the molecular ion peak only. This study represents the most comprehensive qualitative characterization of SRM 1597a to date. Graphical abstract NPLC-GC/MS analysis for the six-ring MM 302 Da PAH isomers in SRM 1597a.