Highly sensitive detection of acid phosphatase by using a graphene quantum dots-based förster resonance energy transfer

Research progress of fluorescent composites based on cyclodextrins: Preparation strategies, fluorescence properties and applications in sensing and bioimaging

Fluorescence analysis has been regarded as one of the commonly used analytical methods because of its advantages of simple operation, fast response, low cost and high sensitivity. So far, various fluorescent probes, with noble metal nanoclusters, quantum dots, organic dyes and metal organic frameworks as representatives, have been widely reported. However, single fluorescent probe often suffers from some deficiencies, such as low quantum yield, poor chemical stability, low water solubility and toxicity. To overcome these disadvantages, the introduction of cyclodextrins into fluorescent probes has become a fascinating approach. This review (with 218 references) systematically covers the research progress of fluorescent composites based on cyclodextrins in recent years. Preparation strategies, fluorescence properties, response mechanisms and applications in sensing (ions, organic pollutants, bio-related molecules, temperature, pH) and bioimaging of fluorescent composites based on cyclodextrins are summarized in detail. Finally, the current challenges and future perspectives of these composites in relative research fields are discussed.

Fluorescent metal nanoclusters: From luminescence mechanism to applications in enzyme activity assays

Metal nanoclusters (MNCs) have outstanding fluorescence property and biocompatibility, which show widespread applications in biological analysis. Particularly, evaluation of enzyme activity with the fluorescent MNCs has been developed rapidly within the past several years. In this review, we first introduced the fluorescent mechanism of mono- and bi-metallic nanoclusters, respectively, whose interesting luminescence properties are mainly resulted from electron transfer between the lowest unoccupied molecular orbital (LUMO) and highest occupied molecular orbital (HOMO) energy levels. Meanwhile, the charge migration within the structure occurs through ligand-metal charge transfer (LMCT) or ligand-metal-metal charge transfer (LMMCT). On such foundation, diverse enzyme activities were rigorously evaluated, including three transferases and nine hydrolases, in turn harvesting rapid research progresses within past 5 years. Finally, we summarized the design strategies for evaluating enzyme activity with the MNCs, presented the major issues and challenges remained in the relevant research, coupled by showing some improvement measures. This review will attract researchers dedicated to the studies of the MNCs and provide some constructive insights for their further applications in enzyme analysis.

Oxidase-like Fe-N/C single atom nanozyme enables sensitive detection of ascorbic acid and acid phosphatase

The development of cost-effective and easy-to-use strategies for the detection of ascorbic acid (AA) and acid phosphatase (ACP) is in high demand but challenging. Thus, we report a novel colorimetric platform based on Fe-N/C single atom nanozyme with efficient oxidase mimicking activity for their highly sensitive detection. The designed Fe-N/C single atom nanozyme can directly oxidize 3,3',5,5'-tetramethylbenzidine (TMB) to produce a blue oxidation product (oxTMB) in the absence of H₂O₂. In addition, L-ascorbic acid 2-phosphate can be hydrolyzed to ascorbic acid in the presence of ACP, which inhibits the oxidation reaction and results in a significant bleaching of the blue color. Based on these phenomena, a novel colorimetric assay with high catalytic activity was developed for the determination of ascorbic acid and acid phosphatase with detection limits of 0.092 μM and 0.048 U/L, respectively. Notably, this strategy was successfully applied to the determination of ACP in human serum samples and evaluate ACP inhibitors, indicating its potential as a valuable tool for clinical diagnosis and research.

Graphene quantum dots: synthesis, properties, and applications to the development of optical and electrochemical sensors for chemical sensing

GQDs exhibits exceptional electrochemical activity owing to their active edge sites that make them very attractive for biosensing applications. However, their use in the design of new biosensing devices for application to the detection and quantification of toxins, pathogens, and clinical biomarkers has so far not investigated in detail. In this regard, herein we provide a detailed review on various methodologies employed for the synthesis of GQDs, including bottom-up and top-down approaches, with a special focus on their applications in biosensing via fluorescence, photoluminescence, chemiluminescence, electrochemiluminescence, fluorescence resonance energy transfer, and electrochemical techniques. We believe that this review will shed light on the critical issues and widen the applications of GQDs for the design of biosensors with improved analytical response for future applications. HIGHLIGHTS: • Properties of GQDs play a critical role in biosensing applications. • Synthesis of GQDs using top-down and bottom-up approaches is discussed comprehensively. • Overview of advancements in GQD-based sensors over the last decade. • Methods for the design of selective and sensitive GQD-based sensors. • Challenges and opportunities for future GQD-based sensors.

Green- and Red-Emitting Fluorescent Silicon Nanoparticles: Synthesis, Mechanism, and Acid Phosphatase Sensing

Until now, the green and facile synthesis of multicolor fluorescent silicon nanoparticles (SiNPs) with favorable biocompatibility for cellular imaging and biosensors is still a challenge. Herein, a facile one-step room temperature method for preparing fluorescent SiNPs displayed different emission wavelengths was reported. Green and red fluorescent SiNPs (G-SiNPs and R-SiNPs) were synthesized by adjusting the concentration of the reducing agent 2,4-diaminophenol hydrochloride when the amount of N-[3-(trimethoxysilyl)-propyl]-ethylenediamine was consistent. Characterized by Fourier transform infrared spectroscopy, transmission electron microscopy, and X-ray photoelectron spectroscopy, the results revealed that the G-SiNPs and R-SiNPs were assembled by polymerization of different building blocks, and the emission characteristics of these SiNPs were attributed to the difference in their structural composition and particle size. Interestingly, these fluorescent SiNPs exhibited excellent water solubility, salt tolerance, pH stability, photobleaching resistance, and low cytotoxicity, which facilitated multicolor cell imaging, and further led to these SiNPs were highly attractive in a variety of applications, such as multi-channel sensing and biological imaging. Furthermore, the R-SiNPs have shown the potential to detect acid phosphatase, which is a biomarker of prostate cancer.

Polyaniline Synthesized by Different Dopants for Fluorene Detection via Photoluminescence Spectroscopy

The effects of different dopants on the synthesis, optical, electrical and thermal features of polyaniline were investigated. Polyaniline (PANI) doped with p-toluene sulfonic acid (PANI-PTSA), camphor sulphonic acid (PANI-CSA), acetic acid (PANI-acetic acid) and hydrochloric acid (PANI-HCl) was synthesized through the oxidative chemical polymerization of aniline under acidic conditions at ambient temperature. Fourier transform infrared light, X-ray diffraction, UV-visible spectroscopy, field emission scanning electron microscopy, photoluminescence spectroscopy and electrical analysis were used to define physical and structural features, bandgap values, electrical conductivity and type and degree of doping, respectively. Tauc calculation reveals the optical band gaps of PANI-PTSA, PANI-CSA, PANI-acetic acid and PANI-HCl at 3.1, 3.5, 3.6 and 3.9 eV, respectively. With the increase in dopant size, crystallinity is reduced, and interchain separations and d-spacing are strengthened. The estimated conductivity values of PANI-PTSA, PANI-CSA, PANI-acetic acid and PANI-HCl are 3.84 × 101, 2.92 × 101, 2.50 × 10-2, and 2.44 × 10-2 S·cm-1, respectively. Particularly, PANI-PTSA shows high PL intensity because of its orderly arranged benzenoid and quinoid units. Owing to its excellent synthesis, low bandgap, high photoluminescence intensity and high electrical features, PANI-PTSA is a suitable candidate to improve PANI properties and electron provider for fluorene-detecting sensors with a linear range of 0.001-10 μM and detection limit of 0.26 nM.

Graphene oxide-based fluorescent biosensors and their biomedical applications in diagnosis and drug discovery

Graphene oxide (GO), an oxidized derivative of graphene, has received much attention for developing novel fluorescent bioanalytic platforms due to its remarkable optical properties and biocompatibility. The reliable performance and robustness of GO-based biosensors have enabled various applications in the biomedical field including diagnosis and drug discovery. Here, recent advances in the development of GO-based fluorescent biosensors are overviewed, particularly nucleic acid detection and enzyme activity assay. In addition, practical applications in biomarker detection and high-throughput screening are also examined. Lastly, basic design principles and remaining challenges of these types of biosensors are discussed for further progress.

Construction of a Carbon Dots/Cobalt Oxyhydroxide Nanoflakes Biosensing Platform for Detection of Acid Phosphatase

Because abnormal acid phosphatase (ACP) can disrupt the normal physiological processes, determination of ACP level is extremely important for early diagnosis, treatment, and prognostic evaluation of diseases. Herein, a fluorescence platform for monitoring ACP level was established based on the assembly of red-emitting carbon dots (RCDs) on cobalt oxyhydroxide (CoOOH) nanoflakes. RCDs displayed excellent water solubility, pH stability, salt resistance, and photobleaching resistance. Interestingly, the fluorescence of the RCDs assembled on the surface of the CoOOH nanoflakes could be quenched due to the energy transfer caused by the nanoflakes. However, the ascorbic acid (AA) produced by the hydrolysis of ascorbic acid-2-phosphate trisodium salt (AAP) catalyzed by ACP could quickly and effectively reduce CoOOH nanoflakes, leading to the fluorescence recovery of the RCDs. Therefore, an "off-on" biosensor platform for rapid, sensitive, and selective detection of ACP was constructed with a limit of detection of 0.25 mU/L. With the assistance of the biosensor, the level of ACP in human serum samples was evaluated, and the spike recovery values ranged from 94.0% to 104.5%.

Novel Prostate Cancer Biomarkers: Aetiology, Clinical Performance and Sensing Applications

The review initially provides a short introduction to prostate cancer (PCa) incidence, mortality, and diagnostics. Next, the need for novel biomarkers for PCa diagnostics is briefly discussed. The core of the review provides details about PCa aetiology, alternative biomarkers available for PCa diagnostics besides prostate specific antigen and their biosensing. In particular, low molecular mass biomolecules (ions and metabolites) and high molecular mass biomolecules (proteins, RNA, DNA, glycoproteins, enzymes) are discussed, along with clinical performance parameters.

A dual-signal fluorescent probe for detection of acid phosphatase

Acid phosphatase has become a significant indicator of prognostic and medical diagnosis, and its dysfunction may lead to a series of diseases. A novel dual-signal fluorescence method for acid phosphatase detection based on europium polymer (europium-pyridine dicarboxylicacid-adenine) and pyridoxal phosphate (PLP) was proposed. PLP coordinated with europium polymer via Eu³⁺ and P-O bonds, and the fluorescence of europium polymer was quenched due to the photoinduced electron transfer (PET) effect between aldehyde and europium polymer. Upon addition of acid phosphatase, the PLP was transformed to phosphate (Pi) and pyridoxal (PL). The PL was released from the surface of europium polymer, and the blue emission was enhanced due to the formation of internal hemiacetal, while the fluorescence of europium polymer recovered. The blue (PL) and red emission (Eu³⁺) were positively correlated with acid phosphatase activity; thus the sensitive assay of acid phosphatase was effectively achieved. The two signals were applied to determine the acid phosphatase with limits of detection (LOD) of 0.04 mU/mL and 0.38 mU/mL, and the linear ranges were 0.13-5.00 mU/mL and 1.25-20.00 mU/mL, respectively. The probe can be used to trace the acid phosphatase in biological systems and holds promise for use in clinical diagnosis and early prevention.

Human serum albumin templated MnO2 nanosheets as an efficient biomimetic oxidase for biomolecule sensing

Herein, we have proposed a colorimetric biosensor for detection of acid phosphatase based on human serum albumin (HSA) templated MnO2 nanosheets (HSA-MnO2 NSs). HSA-MnO2 NSs as an efficient biomimetic oxidase could catalyze the oxidization of 3,3',5,5'-tetramethylbenzidine (TMB) to the coloured oxidation product (oxTMB). Acid phosphatase (ACP) could hydrolyze l-ascorbic acid-2-phosphate (AAP) to produce ascorbic acid, and ascorbic acid could lead to the decomposition of MnO2 NSs to Mn2+ ions, inhibiting the production of oxTMB. On the basis of this, we have demonstrated a novel colorimetric approach for the detection of acid phosphatase with the linear range from 50 μU mL-1 to 1500 μU mL-1 and a detection limit of 40 μU mL-1. The MnO2 NS-based colorimetric method has been successfully used to determine the content of acid phosphatase in real samples with satisfactory results.

Applications of Graphene Quantum Dots in Biomedical Sensors

Due to the proliferative cancer rates, cardiovascular diseases, neurodegenerative disorders, autoimmune diseases and a plethora of infections across the globe, it is essential to introduce strategies that can rapidly and specifically detect the ultralow concentrations of relevant biomarkers, pathogens, toxins and pharmaceuticals in biological matrices. Considering these pathophysiologies, various research works have become necessary to fabricate biosensors for their early diagnosis and treatment, using nanomaterials like quantum dots (QDs). These nanomaterials effectively ameliorate the sensor performance with respect to their reproducibility, selectivity as well as sensitivity. In particular, graphene quantum dots (GQDs), which are ideally graphene fragments of nanometer size, constitute discrete features such as acting as attractive fluorophores and excellent electro-catalysts owing to their photo-stability, water-solubility, biocompatibility, non-toxicity and lucrativeness that make them favorable candidates for a wide range of novel biomedical applications. Herein, we reviewed about 300 biomedical studies reported over the last five years which entail the state of art as well as some pioneering ideas with respect to the prominent role of GQDs, especially in the development of optical, electrochemical and photoelectrochemical biosensors. Additionally, we outline the ideal properties of GQDs, their eclectic methods of synthesis, and the general principle behind several biosensing techniques.

Graphene-based biosensors for the detection of prostate cancer protein biomarkers: a review

Prostate cancer (PC) is the sixth most common cancer type in the world, which causes approximately 10% of total cancer fatalities. The detection of protein biomarkers in body fluids is the key topic for the diagnosis and prognosis of PC. Highly sensitive screening of PC is the most effective approach for reducing mortality. Thus, there are a growing number of literature that recognizes the importance of new technologies for early diagnosis of PC. Graphene is playing an important role in the biosensor field with remarkable physical, optical, electrochemical and magnetic properties. Many recent studies demonstrated the potential of graphene materials for sensitive detection of protein biomarkers. In this review, the graphene-based biosensors toward PC analysis are mainly discussed in two groups: Firstly, novel biosensor interfaces were constructed through the modification of graphene materials onto sensor surfaces. Secondly, ingenious signal amplification strategies were developed using graphene materials as catalysts or carriers. Graphene-based biosensors have exhibited remarkable performance with high sensitivities, wide detection ranges, and long-term stabilities.

Energy transfer in liquid and solid nanoobjects: application in luminescent analysis

Radiationless resonance electronic excitation energy transfer (ET) is a fundamental physical phenomenon in luminescence spectroscopy playing an important role in natural processes, especially in photosynthesis and biochemistry. Besides, it is widely used in photooptics, optoelectronics, and protein chemistry, coordination chemistry of transition metals and lanthanides as well as in luminescent analysis. ET involves the transfer of electronic energy from a donor (D) (molecules or particles) which is initially excited, to an acceptor (A) at the ground state to emit it later. Fluorescence or phosphorescence of the acceptor that occurs during ET is known as sensitized. There do many kinds of ET exist but in all cases along with other factors the rate and efficiency of ET in common solvents depends to a large extent on the distance between the donor and the acceptor. This dependency greatly limits the efficiency of ET and, correspondingly, does not allow the determination of analytes in highly diluted (10–9–10–15 M) solutions. To solve the problem of distance-effect, the effects of concentrating and bring close together the donor and acceptor in surfactant micelles (liquid nanosystems) or sorption on solid nanoparticles are used. Various approaches to promote the efficiency of ET for improvement determination selectivity and sensitivity using liquid and solid nanoobjects is reviewed and analyzed.