Insights in the analytical performance of neat metal-organic frameworks in the determination of pollutants of different nature from waters using dispersive miniaturized solid-phase extraction and liquid chromatography

A new method based on dispersive solid phase microextraction with commercial MOFs coupled to LC-MS/MS for the determination of isoflavones in soy drinks

For the first time, a method based on dispersive solid phase microextraction (D-μSPE) using commercial metal-organic frameworks coupled to liquid chromatography-triple quadrupole tandem mass spectrometry (LC-MS/MS) has been proposed for the determination of isoflavones in soy drinks. The use of commercial sorbents simplifies the sample treatment procedure and allows their application to routine analysis. Optimization of the parameters involved in the microextraction process was carried out using a Box-Behnken experimental design. Under the optimized conditions, the limits of detection ranged between 2 and 7 μg L-1; the intra-day and inter-day precision were <10 and 20%, respectively, and the recoveries were in the range of 61-120%. No significant matrix effect was found, which allowed the use of external standard calibration method. The method was successfully applied to the determination of isoflavones in commercial soy milk samples.

Applications of metal organic frameworks in dispersive micro solid phase extraction (D-μ-SPE)

Metal-organic frameworks (MOFs) are a fascinating family of crystalline porous materials made up of metal clusters and organic linkers. In comparison with other porous materials, MOFs have unique characteristics including high surface area, homogeneous open cavities, and permanent high porosity with variable shapes and sizes. For these reasons, MOFs have recently been explored as sorbents in sample preparation by solid-phase extraction (SPE). However, SPE requires large amounts of sorbents and suffers from limited contact surfaces with analytes, which compromises extraction recovery and efficiency. Dispersive SPE (D-SPE) overcomes these limitations by dispersing the sorbents into the sample, which in turn increases contact with the analytes. Miniaturization of the microextraction procedure, particularly the amount of sorbent reduces the amount consumed of the organic solvent and shorten the time required to attain the equilibrium state. This may explain the reported high efficiency and applicability of MOFs in dispersive micro SPE (D-µ-SPE). This method retains all the advantages of solid phase extraction while also being simpler, faster, cheaper, and, in some cases, more effective in comparison with D-SPE. Besides, D-µ-SPE requires smaller amounts of the sorbents which reduces the overall cost, and the amount of waste generated from the analytical process. In this review, we discuss the applications of MOFs in D-µ-SPE of various analytes including pharmaceuticals, pesticides, organic dyes from miscellaneous matrices including water samples, biological samples and food samples.

Cellulose-based adsorbents for solid phase extraction and recovery of pharmaceutical residues from water

Cellulose has attracted interest from researchers both in academic and industrial sectors due to its unique structural and physicochemical properties. The ease of surface modification of cellulose by the integration of nanomaterials, magnetic components, metal organic frameworks and polymers has made them a promising adsorbent for solid phase extraction of emerging contaminants, including pharmaceutical residues. This review summarizes, compares, and contrasts different types of cellulose-based adsorbents along with their applications in adsorption, extraction and pre-concentration of pharmaceutical residues in water for subsequent analysis. In addition, a comparison in efficiency of cellulose-based adsorbents and other types of adsorbents that have been used for the extraction of pharmaceuticals in water is presented. From our observation, cellulose-based materials have principally been investigated for the adsorption of pharmaceuticals in water. However, this review aims to shift the focus of researchers to the application of these adsorbents in the effective pre-concentration of pharmaceutical pollutants from water at trace concentrations, for quantification. At the end of the review, the challenges and future perspectives regarding cellulose-based adsorbents are discussed, thus providing an in-depth overview of the current state of the art in cellulose hybrid adsorbents for extraction of pharmaceuticals from water. This is expected to inspire the development of solid phase exraction materials that are efficient, relatively cheap, and prepared in a sustainable way.

Chromatographic techniques for the analysis of organophosphate pesticides with their extraction approach: a review (2015-2020)

In agriculture, a wide range of OPPs has been employed to boost crop yield, quality, and storage life. However, due to the ever-increasing population and rapid urbanization, pesticide use has surged in recent years. These compounds are exceedingly poisonous to humans, and despite the fact that specific legislation prohibits their use, the frequency of toxic and/or fatal incidents, as well as current statistics, suggest that they are currently accessible. As a result, determining the exposure to these substances as well as their detection (and that of their metabolites) in different types of exposed samples has become a hot issue in terms of quality and safety concerns. However, developing tools for the evaluation of these substances is a critical challenge for laboratories. Various chromatographic-based methods reported in the period of 2015-2020 have been developed, which are summarized and critically reviewed in this article, including the extraction of the target OPPs from different kinds of matrices. A comparison among the extraction and analysis techniques has been made in the current review article.

On the use of metal-organic frameworks for the extraction of organic compounds from environmental samples

The determination of trace metals and organic contaminants in environmental samples, such as water, air, soil, and sediment, is until today a challenging process for the analytical chemistry. Metal-organic frameworks (MOFs) are novel porous nanomaterials that are composed of metal ions and an organic connector. These materials are gaining more and more attention due to their superior characteristics, such as high surface area, tunable pore size, mechanical and thermal stability, luminosity, and charge transfer ability between metals and ligands. Among the various applications of MOFs are gas storage, separation, catalysis, and drug delivery. Recently, MOFs have been successfully introduced in the field of sample preparation for analytical chemistry and they have been used for sample pretreatment of various matrices. This review focuses on the applications of MOFs as novel adsorbents for the extraction of organic compounds from environmental samples.

Development of monolith/aminated carbon nanotubes composite-based solid-phase microextraction of phenoxycarboxylic acids herbicides in water and soil samples

In this study, a new adsorbent based on monolith/aminated carbon nanotubes composite was facilely prepared and employed as the extraction phase of multiple monolithic fibers solid-phase microextraction for the capture of phenoxycarboxylic acids herbicides. The adsorbent was fabricated by mingling aminated carbon nanotubes in the poly (allylthiourea-co-ethylene glycol dimethacrylate) monolith. Various techniques were employed to characterize the morphology, structure, and pore size of the prepared adsorbent. The proposed microextraction method displayed satisfactory capture performance towards studied analytes through multi-interactions such as hydrogen-bonding, hydrophobic and π-π interactions. Under the optimized conditions, a sensitive and reliable method to quantify trace analytes in water and soil samples was developed. The limits of detection were in the ranges of 0.13-0.25 μg/L and 0.20-0.61 μg/kg for water and soil samples, respectively. The practicality of the introduced method was demonstrated by applying it to monitor the contents of studied analytes in environmental water and soil samples. Satisfactory fortified recoveries (76.4-119%) and reproducibility were obtained. The achieved results well demonstrated that the suggested microextraction technique can efficiently extract phenoxycarboxylic acids and the developed method exhibits a promising potential for reliable and sensitive quantification of trace analytes in complex samples.

Headspace solid-phase microextraction based on the metal-organic framework CIM-80(Al) coating to determine volatile methylsiloxanes and musk fragrances in water samples using gas chromatography and mass spectrometry

A headspace solid-phase microextraction (HS-SPME) method was developed using the metal-organic framework (MOF) CIM-80(Al) as extraction phase and in combination with gas chromatography-mass spectrometry (GC-MS) for the simultaneous determination of 6 methylsiloxanes and 7 musk fragrances in different environmental waters. The chromatographic separation was optimized in different GC instruments equipped with different detectors, allowing the correct separation and identification of the compounds. The HS-SPME method was optimized using a Box-Behnken experimental design, while the validation was carried out together with the most suitable commercial fiber (divinylbenzene/polydimethylsiloxane) for comparison purposes. The MOF-based coating was particularly efficient for the determination of volatile methylsiloxanes, showing moderately lower limits of detection (of 0.2 and 0.5 μg L^-1versus 0.6 μg L^-1 for cyclic methylsiloxanes) and slightly better precision (relative standard deviation values lower than 17% versus 22%) than the commercial coating, while avoiding the cross-contamination issues associated to the polymeric composition of commercial fibers. The method was applied for the analysis of seawater and wastewater samples, allowing the quantification of several analytes and the assessment of matrix effects. The proposed HS-SPME method using the CIM-80(Al) fiber constitutes a more environmentally friendly, simpler, and efficient strategy in comparison with other sample preparation methods using different extraction techniques, while the use of a MOF as fiber sorbent constitutes a potential alternative to exploit the features of SPME for the challenging environmental monitoring of these compounds.

Magnetic porous carbon nanocomposite derived from cobalt based-metal-organic framework for extraction and determination of homo and hetero-polycyclic aromatic hydrocarbons

Herein, a novel magnetic porous carbon nanocomposite derived from a cobalt based-metal-organic framework was synthesized and evaluated for simultaneous preconcentration of homo and hetero-polycyclic aromatic hydrocarbons. Briefly, magnetite nanoparticles (MNPs) were synthesized and then were coated with a metal-organic framework layer. Finally, the magnetic nanocomposite was carbonized under an inert atmosphere to obtain the magnetic porous carbon (MPC). Various characterization techniques such as FT-IR spectroscopy, transmission and scanning electron microcopies, vibrating sample magnetometry, and X-ray diffraction were employed. Applicability of the MPC was explored using benzothiophene, dibenzothiophene, 9,10-dimethylanthracene, and benz[α]anthracene as the model analytes. Limits of detection and linearities were achieved in the range of 0.06-0.18 μg L^-1 and 0.25-500 μg L^-1, respectively. Precision of the method as RSDs was evaluated which was in the range of 4.2-7.0% (within-day, n = 5) and 8.2-11.3% (between-day, n = 3). Ultimately, the method was applied to analyze two seawater samples and satisfactory results (RSDs%, 5.0-9.0%; relative recoveries, 89-104%) were obtained.

Collaborative compounding of metal-organic frameworks for dispersive solid-phase extraction HPLC-MS/MS determination of tetracyclines in honey

Metal-organic frameworks (MOFs), a sort of dispersive solid-phase extraction (d-SPE) material, has shown considerable prospects in the pretreatment of food, biological and other complex samples. Herein, we developed a method for compounding MOFs for d-SPE and trace determination of tetracyclines (TCs) in honey. When the compounding ratio of MIL-101 (Cr), MIL-100 (Fe) and MIL-53 (Al) was 7:1:2, adsorption-extraction was effective. Followed by high-performance liquid chromatography-tandem mass spectrometry (HPLC-MS/MS), the limits of detection were 0.073-0.435 ng/g and the limits of quantitation ranged from 0.239 to 1.449 ng/g for oxytetracycline, tetracycline, chlortetracycline and doxycycline. The method was applied to four kinds of honey samples with recoveries from 88.1% to 126.2%. The compounding of MOFs provides a strategy for purification and multi-target extraction from complex food matrices by d-SPE.

A thin-layer solid-phase extraction-liquid film elution technique used for the enrichment of polycyclic aromatic hydrocarbons in water

In this article, we propose a novel microsolid-phase extraction and elution technique, which we called the thin-layer solid-phase extraction-liquid film elution technique. The thin-layer solid-phase extraction phase is an octadecylsilylated sol gel- coated porous silica thin film prepared on the outer wall of a test tube, which has a larger surface area for the extraction of the target compounds compared to a conventional solid-phase microextraction phase. After optimization of the extraction procedure for five types of polycyclic aromatic hydrocarbons, the liquid film elution technique was investigated. Liquid film elution is an elution technique wherein the compounds extracted into the thin-layer solid-phase extraction phase are eluted using a small volume of solvent film formed around the extraction phase. The results show that the elution can be carried out using 150 μL of eluent. Enrichment factors between 20 and 34 were obtained for polycyclic aromatic hydrocarbons containing more than four aromatic rings in 10 mL aliquots of aqueous samples. Finally, recoveries of 85-112% were obtained for polycyclic aromatic hydrocarbons containing more than four aromatic rings from spiked natural water samples using the thin-layer solid-phase extraction-liquid film elution technique.

Novel Ce(III)-Metal Organic Framework with a Luminescent Property To Fabricate an Electrochemiluminescence Immunosensor

We designed a novel luminescent metal-organic framework (MOF) named Ce-TCPP-LMOF (CTM) through a simple one-pot solvothermal method. CTM was synthesized by using the emerging electrochemiluminescent (ECL) material (4,4',4″,4‴-(porphine-5,10,15,20-tetrayl)tetrakis(benzoic acid) as the organic ligand and Ce(III) as the metal node. We found that CTM not only has the remarkable ability to emit light but also has a uniform "sandwich biscuit" shape and suitable nanoscale size, which are promising for further applications. We also applied CTM to construct a novel ECL immunosensor and achieve sensitive detection of the proprotein convertase subtilisin/kexin type 9 (PCSK9), a biomarker related to cardiovascular diseases. To further amplify the ECL signal of CTM, a novel dual-amplified signal strategy was established by inducing a polyamidoamine dendrimer (PAMAM) and gold nanoparticles (AuNPs). Importantly, we first proved that the ECL signal of the CTM/S₂O₈^2- system could be enhanced by the PAMAM electric field. As the electron transfer rate was accelerated by the AuNP layer, this ECL signal was further enhanced in AuNP-modified electrodes. The ECL immunosensor showed desirable performance for PCSK9 analysis within a detection range of 50 fg mL^-1 to 10 ng mL^-1 and a low limit of detection of 19.12 ± 2.69 fg mL^-1. Real sample detection suggested that the immunosensor holds great potential for analyzing clinical serum samples.

Zirconium metal-organic framework assisted miniaturized solid phase extraction of phenylurea herbicides in natural products by ultra-high-performance liquid chromatography coupled with quadrupole time-of-flight mass spectrometry

The zirconium metal-organic framework (Zr-MOF) was used as a novel and effective adsorbent material for the enrichment of five phenylurea herbicides (fenuron, monuron, diuron, linuron and pencycuron) in natural products. The target analytes were determined by ultra-high-performance liquid chromatography coupled with quadrupole time-of-flight mass spectrometry. Some crucial experimental parameters, such as type of adsorbents, amount of adsorbent, type of eluent solvents and adsorption capacity were investigated and optimized. Under the optimum extraction conditions, the enrichment factors of fenuron, monuron, diuron, linuron and pencycuron were 90, 128, 148, 204 and 295 times, respectively. A good linearity was obtained in different concentration levels of target analytes with the determination coefficients (r²) larger than 0.993. In addition, the limits of detection varied from 0.05 to 0.36 ng/mL and the recoveries of the analytes were in the range of 85.19-99.13 %. The results demonstrated that the proposed miniaturized solid-phase extraction procedure coupled with Zr-MOF could become an effective tool to analyze phenylurea herbicides and would have the vast application prospect for the extraction of pesticide residue and more organic pollutants from Hawthorn, Dendrobii Officinalis Caulis and Salviae Miltiorrhizae Radix et Rhizoma samples.

Evaluation of metal-organic framework NH2-MIL-101(Fe) as an efficient sorbent for dispersive micro-solid phase extraction of phenolic pollutants in environmental water samples

This work proposes an application of amine-functionalized metal-organic framework (NH₂-MIL-101(Fe)) as sorbent for dispersive micro-solid phase extraction (D-μSPE) of ten priority phenolic pollutants. The sorbent was simply synthesized under facile condition. The entire D-μSPE process was optimized by studying the effect of experimental parameters affecting the extraction recovery of the target analytes. The final extract was analyzed using high performance liquid chromatography with photodiode array detector. Under the optimum condition, the proposed procedure can be applied for wide linear calibration ranges between 1.25–5000 μg L⁻¹ with the correlation coefficients of greater than 0.9900. The limits of detection (LODs) and limits of quantitation (LOQs) were in the ranges of 0.4–9.5 μg L⁻¹ and 1.25–30 μg L⁻¹, respectively. The precision evaluated in terms of the relative standard deviations (RSDs) of the intra- and inter-day determinations of the phenol compounds at their LOQ concentrations were below 13.9% and 12.2%, respectively. High enrichment factors up to 120 were reached. The developed method has been successfully applied to determine phenol residues in environmental water samples. The satisfactory recoveries obtained by spiking phenol standards at two different concentrations (near LOQs and 5 times as high as LOQs) ranged from 68.4–114.4%. The results demonstrate that the NH₂-MIL-101(Fe) material is promising sorbent in the D-μSPE of phenolic pollutants.

Mixed Functionalization of Organic Ligands in UiO-66: A Tool to Design Metal-Organic Frameworks for Tailored Microextraction

The mixed-ligand strategy was selected as an approach to tailor a metal–organic framework (MOF) with microextraction purposes. The strategy led to the synthesis of up to twelve UiO-66-based MOFs with different amounts of functionalized terephthalate ligands (H-bdc), including nitro (-NO₂) and amino (-NH₂) groups (NO₂-bdc and NH₂-bdc, respectively). Increases of 25% in ligands were used in each case, and different pore environments were thus obtained in the resulting crystals. Characterization of MOFs includes powder X-ray diffraction, infrared spectroscopy, and elemental analysis. The obtained MOFs with different degrees and natures of functionalization were tested as sorbents in a dispersive miniaturized solid-phase extraction (D-µSPE) method in combination with high-performance liquid chromatography (HPLC) and diode array detection (DAD), to evaluate the influence of mixed functionalization of the MOF on the analytical performance of the entire microextraction method. Eight organic pollutants of different natures were studied, using a concentration level of 5 µg· L⁻¹ to mimic contaminated waters. Target pollutants included carbamazepine, 4-cumylphenol, benzophenone-3, 4-tert-octylphenol, 4-octylphenol, chrysene, indeno(1,2,3-cd)pyrene, and triclosan, as representatives of drugs, phenols, polycyclic aromatic hydrocarbons, and disinfectants. Structurally, they differ in size and some of them present polar groups able to form H-bond interactions, either as donors (-NH₂) or acceptors (-NO₂), permitting us to evaluate possible interactions between MOF pore functionalities and analytes’ groups. As a result, extraction efficiencies can reach values of up to 60%, despite employing a microextraction approach, with four main trends of behavior being observed, depending on the analyte and the MOF.

Application of magnetized MOF-74 to phthalate esters extraction from Chinese liquor

In this study, magnetized MOF-74 (Ni) was prepared using an ultrasound-assisted synthesis method. This novel functional magnetic adsorbent was characterized using various techniques. Using the prepared material as adsorbents, a magnetic solid-phase extraction method coupled with high-performance liquid chromatography was proposed for determining four phthalate esters in Chinese liquor samples. The extraction parameters, including solution pH, adsorbent amount, extraction time, and eluent type and volume, were optimized. Under the optimized conditions, proposed method showed good linearity within the range of 1.53-200 μg/L for diphenyl phthalate, 2.03-200 μg/L for butyl benzyl phthalate, 7.02-200 μg/L for diamyl phthalate, and 6.03-200 μg/L for dicyclohexyl phthalate, with correlation coefficients > 0.9944, low limits of detection (0.46-2.10 μg/L, S/N = 3), and good extraction repeatability (relative standard deviations of 3.7%, n = 6). This method was successfully used to analyze phthalate esters in Chinese liquor samples with recoveries of 74.4-104.8%. Two phthalate esters were detected in two samples, both at concentrations that satisfied the Chinese national standard, indicating this method has practical application prospects. The extraction efficiency of this method was also compared with conventional solid-phase extraction using commercial C₁₈ cartridges. The results demonstrated that the proposed magnetic solid-phase extraction is a simple, time-saving, efficient, and low-cost method.

Application of a Pillared-Layer Zn-Triazolate Metal-Organic Framework in the Dispersive Miniaturized Solid-Phase Extraction of Personal Care Products from Wastewater Samples

The pillared-layer Zn-triazolate metal-organic framework (CIM-81) was synthesized, characterized, and used for the first time as a sorbent in a dispersive micro-solid phase extraction method. The method involves the determination of a variety of personal care products in wastewaters, including four preservatives, four UV-filters, and one disinfectant, in combination with ultra-high performance liquid chromatography and UV detection. The CIM-81 MOF, constructed with an interesting mixed-ligand synthetic strategy, demonstrated a better extraction performance than other widely used MOFs in D-µSPE such as UiO-66, HKUST-1, and MIL-53(Al). The optimization of the method included a screening design followed by a Doehlert design. Optimum conditions required 10 mg of CIM-81 MOF in 10 mL of the aqueous sample at a pH of 5, 1 min of agitation by vortex and 3 min of centrifugation in the extraction step; and 1.2 mL of methanol and 4 min of vortex in the desorption step, followed by filtration, evaporation and reconstitution with 100 µL of the initial chromatographic mobile phase. The entire D-µSPE-UHPLC-UV method presented limits of detection down to 0.5 ng·mL-1; intra-day and inter-day precision values for the lowest concentration level (15 ng·mL-1)-as a relative standard deviation (in %)-lower than 8.7 and 13%, respectively; average relative recovery values of 115%; and enrichment factors ranging from ~3.6 to ~34. The reuse of the CIM-81 material was assessed not only in terms of maintaining the analytical performance but also in terms of its crystalline stability.

Metal organic framework based carbon porous as an efficient dispersive solid phase extraction adsorbent for analysis of methamphetamine from urine matrix

Carboxylated carbon porous adsorbent was derived from zeolite imidazole framework (ZIF-8) via carbonization of ZIF-8 under a nitrogen atmosphere. The synthesized carboxylated adsorbent was fully characterized by various techniques including Fourier transform spectroscopy (FTIR), powder X-ray diffraction (XRD), scanning electron microscopy (SEM), and zeta potential analysis. The carboxylated adsorbent was applied as dispersive solid phase extraction (DSPE) adsorbent for efficient extraction of methamphetamine (MET) from biological urine samples. Several extraction parameters influencing the extraction efficiency were investigated and the calibration curve was plotted under optimized conditions in urine media. The method showed a good linearity in the range of 50-2500 ng/mL. The limit of detection (LOD) and limit of quantification (LOQ) was 10 and 35.80 ng/mL, respectively. A satisfactory analysis of the positive real samples with the recovery of 99.83% confirms the applicability of the proposed method in different clinical and forensic laboratories.

One-pot doping platinum porphyrin recognition centers in Zr-based MOFs for ratiometric luminescent monitoring of nitric oxide in living cells

A new kind of nanoscale MOFs probe for nitric oxide (NO) sensing has been successfully constructed by a one-pot strategy, in which the chemically stable UiO-66 crystal structure was achieved using platinum meso-tetra(4-carboxyphenyl)porphyrin (Pt-TCPP), 1,1,2,2-Tetra(4-carboxylphenyl)ethylene (H₄TCPE) and 1,4-dicarboxybenzene (BDC) as co-linkers (Pt-TCPP/H₄TCPE@UiO-66). Pt-TCPP was verified to serve as a signal reporter in NO sensing fields for the first time while H₄TCPE worked as a luminescence reference to build a ratiometric sensor. The integration of luminescent dyes in nanoscale MOFs effectively avoided their aggregation-caused quenching effect and poor aqueous dispersibility to rationalize NO detection in the aqueous phase. The obtained Pt-TCPP/H₄TCPE@UiO-66 nanoparticles (NPs) exhibited an excellent sensing property toward NO with an ultrahigh linear correlation of the Stern-Volmer equation and a rapid response time as short as 2 min. Moreover, the elaborated sensor could work under a wide pH window (7.4, 5.6 and 0) and the limit of detection (LOD) reached as low as 0.1420 µg mL^-1. The specificity of the obtained Pt-TCPP/H4TCPE@UiO-66 NPs toward NO sensing was scarcely affected by other possibly coexistent species in biological system. The in vitro monitoring for NO in living cells was also testified with these Pt-TCPP/H₄TCPE@UiO-66 NPs.

Influence of Ligand Functionalization of UiO-66-Based Metal-Organic Frameworks When Used as Sorbents in Dispersive Solid-Phase Analytical Microextraction for Different Aqueous Organic Pollutants

Four metal-organic frameworks (MOFs), specifically UiO-66, UiO-66-NH₂, UiO-66-NO₂, and MIL-53(Al), were synthesized, characterized, and used as sorbents in a dispersive micro-solid phase extraction (D-µSPE) method for the determination of nine pollutants of different nature, including drugs, phenols, polycyclic aromatic hydrocarbons, and personal care products in environmental waters. The D-µSPE method, using these MOFs as sorbents and in combination with high-performance liquid chromatography (HPLC) and diode-array detection (DAD), was optimized. The optimization study pointed out to UiO-66-NO₂ as the best MOF to use in the multi-component determination. Furthermore, the utilization of isoreticular MOFs based on UiO-66 with the same topology but different functional groups, and MIL-53(Al) to compare with, allowed us for the first time to evaluate the influence of such functionalization of the ligand with regards to the efficiency of the D-µSPE-HPLC-DAD method. Optimum conditions included: 20 mg of UiO-66-NO₂ MOF in 20 mL of the aqueous sample, 3 min of agitation by vortex and 5 min of centrifugation, followed by the use of only 500 µL of acetonitrile as desorption solvent (once the MOF containing analytes was separated), 5 min of vortex and 5 min of centrifugation. The validation of the D-µSPE-HPLC-DAD method showed limits of detection down to 1.5 ng·L-1, average relative recoveries of 107% for a spiked level of 1.50 µg·L-1, and inter-day precision values with relative standard deviations lower than 14%, for the group of pollutants considered.

A green metal-organic framework to monitor water contaminants

The CIM-80 material (aluminum(iii)-mesaconate) has been synthetized in high yield through a novel green procedure involving water and urea as co-reactants. The CIM-80 material exhibits good thermal stability with a working range from RT to 350 °C with a small contraction upon desolvation. Moreover, this material is stable in water at different pH values (1-10) for at least one week, and shows a LC50 value higher than 2 mg mL-1. The new material has been tested in a microextraction methodology for the monitoring of up to 22 water pollutants while presenting little environmental impact: only 20 mg of CIM-80 and 500 μL of acetonitrile are needed per analysis. The analytical performance of the CIM-80 in the microextraction strategy is similar to or even better for several pollutants than that of MIL-53(Al). The average extraction efficiencies range from ∼20% for heavy polycyclic aromatic hydrocarbons to ∼70-100% for the lighter ones. In the case of the emerging contaminants, the average extraction efficiency can reach values up to 70% for triclosan and carbamazepine.

Graphene reinforced multiple monolithic fiber solid-phase microextraction of phenoxyacetic acid herbicides in complex samples

To increase the specific surface area (SSA) of monolith-based adsorbent for the extraction of phenoxyacetic acid herbicides (PAAs) in complex samples, graphene was embedded in an adsorbent based on poly (4-vinylpyridine-co-ethylene glycol dimethacrylate) monolith (GEM). The new adsorbent was employed as extraction phase of multiple monolithic fiber solid-phase microextraction (MMF-SPME). The influences of preparation conditions and extraction parameters on the enrichment performance of GEM/MMF-SPME for PAAs were investigated in detail. Results well indicated that the embedded graphene could obviously enhance the SSA of the adsorbent and introduce π-π electrostatic stacking groups. The prepared GEM/MMF-SPME could extract PAAs effectively by means of π-π electrostatic stacking, hydrophobic, ion-exchange and hydrogen bonding interactions. Under the most favorable conditions, a convenient, sensitive, cost-effective and environmentally friendly method for the determination of trace PAAs in water and rice samples was developed by the combination of GEM/MMF-SPME and high performance liquid chromatography-diode array detection (HPLC-DAD). Results showed that for water sample, the limits of detection (LOD, S/N = 3) and limit of quantification (LOQ, S/N = 10) values were in the range of 0.093-0.12 μg/L and 0.31-0.41 μg/L, respectively. The corresponding values in rice sample were 0.36-0.66 μg/kg and 1.18-2.27 μg/kg, respectively. The proposed method was successfully applied to quantify trace PAAs in water and rice samples. Recoveries achieved for water and rice samples at different spiked concentrations were in the ranges of 70.0-118% and 70.0-117%, respectively. The RSDs varied from 0.3% to 10% for all analytes. The results well revealed the potential application of GEM/MMF-SPME as an effective sample preparation processes for the monitoring of PAAs in water, rice and other complex samples.