Label-free and nicking enzyme-assisted fluorescence signal amplification for RNase H determination based on a G-quadruplexe/thioflavin T complex

Magnetically actuated microfluidic chip combined with a G-quadruplex DNAzyme-based fluorescent/colorimetric sensor for the dual-mode detection of ochratoxin A in wheat

In this work, a portable fluorescent/colorimetric sensor based on G-quadruplex DNAzyme was constructed to achieve rapid and dual-mode detection of ochratoxin A (OTA) in wheat. OTA aptamers coupled with magnetic beads (MBs) can self-assemble with two segments of DNA and hemin to form a G-quadruplex DNAzyme structure that can catalyze the oxidation of Amplex Red (ADHP) with H2O2, making the solution red and producing strong fluorescence in solution. However, in the presence of OTA, the structure of the G-quadruplex DNAzyme was damaged, resulting in reduced catalytic activity. According to the principle of detection, a magnet-controlled chip integrating the reaction, washing, and detection was designed in this study. Shuttling the MB-DNAzyme probes onto a magnetically controlled chip considerably reduced the background signal and improved the detection efficiency and sensitivity. In addition, a portable fluorescence and colorimetric detection platform was built for on-site OTA detection.

CRISPR/Cas12a collateral cleavage activity for an ultrasensitive assay of RNase H

We herein describe an ultrasensitive RNase H assay by utilizing CRISPR/Cas12a collateral cleavage activity. Based on this unique design principle, the RNase H activity was successfully determined down to 0.00024 U mL^-1, which is quite superior to those of alternative approaches.

Recent advances of fluorescent biosensors based on cyclic signal amplification technology in biomedical detection

The cyclic signal amplification technology has been widely applied for the ultrasensitive detection of many important biomolecules, such as nucleic acids, proteins, enzymes, adenosine triphosphate (ATP), metal ions, exosome, etc. Due to their low content in the complex biological samples, traditional detection methods are insufficient to satisfy the requirements for monitoring those biomolecules. Therefore, effective and sensitive biosensors based on cyclic signal amplification technology are of great significance for the quick and simple diagnosis and treatment of diseases. Fluorescent biosensor based on cyclic signal amplification technology has become a research hotspot due to its simple operation, low cost, short time, high sensitivity and high specificity. This paper introduces several cyclic amplification methods, such as rolling circle amplification (RCA), strand displacement reactions (SDR) and enzyme-assisted amplification (EAA), and summarizes the research progress of using this technology in the detection of different biomolecules in recent years, in order to provide help for the research of more efficient and sensitive detection methods.

DNA-based ribonuclease detection assays

Ribonucleases are useful as biomarkers and can be the source of contamination in laboratory samples, making ribonuclease detection assays important in life sciences research. With recent developments in DNA-based biosensing, several new techniques are being developed to detect ribonucleases. This review discusses some of these methods, specifically those that utilize G-quadruplex DNA structures, DNA-nanoparticle conjugates and DNA nanostructures, and the advantages and challenges associated with them.

Affinity Sensors for the Diagnosis of COVID-19

The coronavirus disease 2019 (COVID-19) outbreak caused by severe acute respiratory syndrome coronavirus 2 (SARS-CoV-2) was proclaimed a global pandemic in March 2020. Reducing the dissemination rate, in particular by tracking the infected people and their contacts, is the main instrument against infection spreading. Therefore, the creation and implementation of fast, reliable and responsive methods suitable for the diagnosis of COVID-19 are required. These needs can be fulfilled using affinity sensors, which differ in applied detection methods and markers that are generating analytical signals. Recently, nucleic acid hybridization, antigen-antibody interaction, and change of reactive oxygen species (ROS) level are mostly used for the generation of analytical signals, which can be accurately measured by electrochemical, optical, surface plasmon resonance, field-effect transistors, and some other methods and transducers. Electrochemical biosensors are the most consistent with the general trend towards, acceleration, and simplification of the bioanalytical process. These biosensors mostly are based on the determination of antigen-antibody interaction and are robust, sensitive, accurate, and sometimes enable label-free detection of an analyte. Along with the specification of biosensors, we also provide a brief overview of generally used testing techniques, and the description of the structure, life cycle and immune host response to SARS-CoV-2, and some deeper details of analytical signal detection principles.

G-quadruplex based biosensor: A potential tool for SARS-CoV-2 detection

G-quadruplex is a non-canonical nucleic acid structure formed by the folding of guanine rich DNA or RNA. The conformation and function of G-quadruplex are determined by a number of factors, including the number and polarity of nucleotide strands, the type of cations and the binding targets. Recent studies led to the discovery of additional advantageous attributes of G-quadruplex with the potential to be used in novel biosensors, such as improved ligand binding and unique folding properties. G-quadruplex based biosensor can detect various substances, such as metal ions, organic macromolecules, proteins and nucleic acids with improved affinity and specificity compared to standard biosensors. The recently developed G-quadruplex based biosensors include electrochemical and optical biosensors. A novel G-quadruplex based biosensors also show better performance and broader applications in the detection of a wide spectrum of pathogens, including SARS-CoV-2, the causative agent of COVID-19 disease. This review highlights the latest developments in the field of G-quadruplex based biosensors, with particular focus on the G-quadruplex sequences and recent applications and the potential of G-quadruplex based biosensors in SARS-CoV-2 detection.

Aptamer biorecognition-triggered hairpin switch and nicking enzyme assisted signal amplification for ultrasensitive colorimetric bioassay of kanamycin in milk

A colorimetric aptasensing strategy for detection of kanamycin was designed based on aptamer biorecognition and signal amplification assisted by nicking enzyme. The aptamer of kanamycin was designed to be contained in the metastable state hairpin DNA. The target DNA as recycling DNA was located in the loop of hairpin DNA. The presence of kanamycin stimulates the continuous actions, including specific recognition of the aptamer to kanamycin, the hybridization between target DNA and signal probe, the cleavage function of nicking enzyme. The actions induced accumulation of numerous free short sequences modified by platinum nanoparticles (PtNPs), which can catalyze the oxidation of 3,3',5,5'-tetramethylbenzidine (TMB)-H₂O₂ to produce a colorimetric response. The aptasensor exhibited good selectivity and sensitivity for kanamycin in milk with a detection limit as low as 0.2 pg·mL^-1. In addition, the proposed assay is potentially to be extended for other antibiotics detection in foods by adapting the corresponding aptamer sequence.

Cyclodextrin supramolecular inclusion-enhanced pyrene excimer switching for highly selective detection of RNase H

Here, we report a novel fluorescence method for the highly selective and sensitive detection of RNase H by combining the use of a dual-pyrene-labeled DNA/RNA duplex with supramolecular inclusion-enhanced fluorescence. Initially, the probe is in the "off" state due to the rigidness of the double-stranded duplex, which separates the two pyrene units. In the presence of RNase H, the RNA strand of the DNA/RNA duplex will be hydrolyzed, and the DNA strand transforms into a hairpin structure, bringing close the two pyrene units which in turn enter the hydrophobic cavity of a γ-cyclodextrin. As a result, the pyrene excimer emission is greatly enhanced, thereby realizing the detection of RNase H activity. Under optimal conditions, RNase H detection can be achieved in the range from 0.08 to 4 U/mL, with a detection limit of 0.02 U/mL.

An allosteric switch-based hairpin for label-free chemiluminescence detection of ribonuclease H activity and inhibitors

To assay enzyme activities and screen its inhibitors, we demonstrated a novel label-free chemiluminescent (CL) aptasensor for the sensitive detection of RNase H activity based on hairpin technology. The specific hairpin structure was a DNA-RNA chimeric strand, which contained a streptavidin aptamer sequence and a blocked RNA sequence. RNase H could specifically recognize and cleave the RNA sequence of the DNA-RNA hybrid stem, liberating the streptavidin aptamer which could be accumulated by streptavidin-coated magnetic microspheres (SA-MP). Then the CL signal was generated due to an instantaneous derivatization reaction between the specific CL reagent 3,4,5-trimethoxyphenyl-glyoxal (TMPG) and the guanine (G) nucleotides in the SA aptamer. This novel assay method exhibited a good linear relationship in the range of 0.1-10 U mL-1 under the optimized conditions. Our results suggested that the developed system was a promising platform for monitoring the RNase H activity and showed great potential in biomedical studies and drug screening.

Target-Activated DNA Polymerase Activity for Sensitive RNase H Activity Assay

Herein, the ribonuclease H (RNase H) activity assay based on the target-activated DNA polymerase activity is described. In this method, a detection probe composed of two functional sequences, a binding site for DNA polymerase and a catalytic substrate for RNase H, serves as a key component. The detection probe, at its initial state, suppresses the DNA polymerase activity, but it becomes destabilized by RNase H, which specifically hydrolyzes RNA in RNA/DNA hybrid duplexes. As a result, DNA polymerase recovers its activity and initiates multiple primer extension reactions in a separate TaqMan probe-based signal transduction module, leading to a significantly enhanced fluorescence "turn-on" signal. This assay can detect RNase H activity as low as 0.016 U mL^-1 under optimized conditions. Furthermore, its potential use for evaluating RNase H inhibitors, which have been considered potential therapeutic agents against acquired immune deficiency syndrome (AIDS), is successfully explored. In summary, this approach is quite promising for the sensitive and accurate determination of enzyme activity and inhibitor screening.

An exonuclease-assisted fluorescence sensor for assaying alkaline phosphatase based on SYBR Green I

In this report, we propose a fast, reliable and convenient approach to determine the alkaline phosphatase (ALP) activity based on a label-free fluorescence strategy. Upon catalysis of ALP, dephosphorylated dsDNA hampers the λ exonuclease (λexo) cleavage, shows high affinity to SYBR Green I (SG I), resulting in a strong fluorescence emission peak at 520 nm. In the absence of ALP, the dsDNA with 5'-phosphoryl-termini could be employed as a substrate of λexo. After cleavage, a weak fluorescence emission peaks at 520 nm could be observed. The assay was both selective and sensitive, and the detection limit was found to be as low as 3 U/L. This method was utilized to evaluate Na₃VO₄ as ALP inhibitor. The method was successfully applied to the determination of the activity of ALP in spiked human serum samples.

Ultrasensitive fluorescent aptasensor for CRP detection based on the RNase H assisted DNA recycling signal amplification strategy

An aptamer-based method for the ultrasensitive fluorescence detection of C-reactive protein (CRP) was developed using the ribonuclease H (RNase H) assisted DNA recycling signal amplification strategy. In this assay, CRP can specifically bind to the aptamer of CRP and the DNA chain of P1 is released from the aptamer/P1 (Ap/P1) complexes. After the addition of the fluorescence labeled (5-FAM) RNA, P1 hybridizes with fluorescence labeled RNA to form a P1/RNA double strand. When RNase H is added, the RNA with fluorescence labeling in the double strand is specifically cut into nucleotide fragments, which cannot be adsorbed on the surface of the GO, so as to generate a fluorescence signal. In the absence of CRP, fluorescence labeled RNA cannot hybridize with P1 to form double strands, which is able to directly adsorb on the surface of GO, resulting in no fluorescence signal. The detection limit is as low as 0.01 ng mL-1, with a linear dynamic range from 50 pg mL-1 to 100 ng mL-1. This sensor is able to detect CRP in spiked human serum, urine and saliva. Thus, it shows a great application prospect in disease diagnosis and prognosis.

Fluorescent Method for the Detection of Biothiols Using an Ag⁺-Mediated Conformational Switch

In this work, a novel, simple, and time-saving fluorescence approach for the detection of biothiols (glutathione and cysteine) was developed by employing a DNA probe labeled with 2-aminopurine. As an adenine analogue, 2-aminopurine exhibits high fluorescence intensity that can be rapidly quenched in the presence of DNA. In the presence of Ag⁺, the fluorescence increased significantly, which was a result of the formation of cytosine–Ag⁺–cytosine base pairs and the release of 2-aminopurine. Upon addition of either glutathione or cysteine, the structure of cytosine–Ag⁺–cytosine was disrupted, a product of the stronger affinity between biothiols and Ag⁺. As a result, the 2-aminopurine-labeled DNA probe returned to its former structure, and the fluorescence signal was quenched accordingly. The detection limit for glutathione and cysteine was 3 nM and 5 nM, respectively. Furthermore, the determination of biothiols in human blood serum provided a potential application for the probe as a diagnostic tool in clinical practice.

Aptamer-Based Fluorometric Ochratoxin A Assay Based on Photoinduced Electron Transfer

This study describes a novel quencher-free fluorescent method for ochratoxin A (OTA) detection based on the photoinduced electron transfer (PIET) between guanine and fluorophore. In the absence of OTA, carboxyfluorescein (FAM)-labeled aptamer can partly hybridize with the complementary strand of OTA aptamer (OTA-cAPT), which contains four guanines at its 3′-end. As a result, the fluorescence of FAM is quenched due to PIET and stacked guanines. In the presence of OTA, FAM-labeled OTA aptamer can bind specifically to OTA, and thereby the high fluorescence intensity of the dye can be maintained. Under the optimal conditions, the method had a detection limit of 1.3 nM. In addition, the method we proposed is highly sensitive and specific for OTA. Furthermore, the method was proven to be reliable based on its successful application in the detection of OTA in red wine samples. Therefore, this promising, facile, and quencher-free method may be applied to detect other toxins by using other appropriate aptamers.

Fluorometric determination of the activity of uracil-DNA glycosylase by using graphene oxide and exonuclease I assisted signal amplification

The base-excision repair enzyme uracil-DNA glycosylase (UDG) plays a crucial role in the maintenance of genome integrity. The authors describe a fluorometric method for the detection of the activity of UDG. It is making use of (a) a 3'-FAM-labeled hairpin DNA probe with two uracil deoxyribonucleotides in the self-complementary duplex region of its hairpin structure, (b) exonuclease I (Exo I) that catalyzes the release of FAM from the UDG-induced stretched ssDNA probe, and (c) graphene oxide that quenches the green FAM fluorescence of the intact hairpin DNA probe in the absence of UDG. If Exo I causes the release of FAM from the hairpin DNA probe, the fluorescence peaking at 517 nm is turned off in the absence of UDG but turned on in its presence. The resulting assay has a wide linear range (0.008 to 1 U·mL^-1) and a detection limit as low as 0.005 U·mL^-1. It has good specificity for UDG over potentially interfering enzymes and gave satisfactory results when applied to biological samples. Conceivably, the method may be used in a wide range of applications such as in diagnosis, drug screening, and in studying the repair of DNA lesions. Graphical abstract Schematic presentation of a fluorometric strategy for detection of the activity of uracil-DNA glycosylase by using on graphene oxide and exonuclease I assisted signal amplification.

A sensitive cyclic signal amplification fluorescence strategy for determination of methyltransferase activity based on graphene oxide and RNase H

A sensitive fluorometric method for DNA methyltransferase activity detection based on graphene oxide and RNase H-assisted signal amplification.

A novel fluorometric method for inorganic pyrophosphatase detection based on G-quadruplex-thioflavin T

In this paper, we propose a fluorometric approach for the highly sensitive detection of inorganic pyrophosphatase (PPase) based on G-quadruplex-thioflavin T (ThT). In the absence of PPase, Cu²⁺ can coordinate with pyrophosphate (PPi) to generate a Cu²⁺/PPi complex. Then the G-rich sequence folds into the G-quadruplex structure, which can combine with ThT to generate a remarkable fluorescent signal. In the presence of PPase, the coordinated compound can be destroyed by the PPase catalyzed hydrolysis of PPi into inorganic phosphate (Pi). The subsequent release of Cu²⁺ can compete with ThT to induce a tighter G-quadruplex structure, causing the release of ThT and a sharp fluorescence decrease. Based on this mechanism, a facile and quantitative strategy for PPase detection was developed. The fluorescence intensity of the system shows a linear relationship with the PPase activities in the range of 0.5-30 U/L with a detection limit as low as 0.48 U/L. The proposed strategy for fluorescence spectrometric PPase detection is convenient, cost effective, and sensitive. This can be utilized to evaluate the inhibition effect of NaF on PPase as well as diagnose PPase-related diseases.