Exploiting the tunable selectivity features of polymeric ionic liquid-based SPME sorbents in food analysis

Yolk-shell MOF-on-MOF hybrid solid-phase microextraction coatings for efficient enrichment and detection of pesticides: Structural regulation cause performance differences

Metal-organic frameworks (MOFs) based composites with different structure-activity relationships have been widely used in the field of organic pollutant adsorption and extraction. Here, two MOF-on-MOF composites with different structures (yolk-shell and core-shell) from homologous sources were prepared by a simple in-situ growth synthesis method and structural regulation. In order to verify the effect of composite structure on the extraction capacity, the adsorption performance of the yolk-shell structure (YS-NH2-UiO-66@CoZn-ZIF) and the core-shell structured (NH2-UiO-66@CoZn-ZIF) material were compared by using them as coating material of direct immersion solid-phase microextraction (DI-SPME) to enrich six pesticides in five matrices. The results showed that because of the unique hollow hierarchical structure, high specific surface area (930.68 m2 g-1), abundant and open active sites, and synergistic and complementary adsorption forces, YS-NH2-UiO-66@CoZn-ZIF composites had the maximum adsorption amount of 36.01-66.31 mg g-1 under the same experiment condition, which was 6.81%-34.26 % higher than that of NH2-UiO-66@CoZn-ZIF. In addition, the adsorption mechanism of the prepared materials was verified and elaborated through theoretical simulations and material characterization. Under the optimized conditions, the YS-NH2-UiO-66@CoZn-ZIF-coated SPME-HPLC-UV method had a wide linear range (0.241-500 μg L-1), a good linear correlation coefficient (R2 > 0.9988), a low detection limits (0.072-0.567 μg L-1, S/N = 3) and low quantification limits (0.241-1.891 μg L-1, S/N = 10). The relative standard deviations of individual fibers and different batches of fibers were 0.47-6.20 % and 0.22-2.48 %, respectively, and individual fibers could be recycled more than 104 times. This work provided a good synthetic route and comparative ideas for exploring the in-situ growth synthesis of yolk-shell composites with reasonable structure-activity relationships.

Multivariate optimization for extraction of 2-methylimidazole and 4-methylimidazole from açaí-based food products using polymeric ionic liquid-based sorbent coatings in solid-phase microextraction coupled to gas chromatography-mass spectrometry

In this study, polymeric ionic liquids featuring different functional moieties were applied as sorbent coatings in direct-immersion solid-phase microextraction (DI-SPME) for the extraction of 2-methylimidazole (2-MI) and 4-methylimidazole (4-MI) from açaí-based food products followed by gas chromatography-mass spectrometry (GC-MS) analysis. The analytical method was optimized using a sequential experimental design. Variables used in GC-MS such as desorption time, as well as for SPME-DI, including extraction time, extraction temperature, incubation time of extraction, amount of NaCl in the extract, and stirring rate, were optimized. The fitness-for-purpose of the method was verified by the linearity of matrix-matched calibration curves (R2 ≥ 0.9921), adequate recoveries (81.7-89.7 %), and precision (relative standard deviations ≤11.2 %). The method was applied to twenty-five samples of açaí-based food products. 4-MI was found in four samples whereas 2-MI was not detected above the limit of detection. The method was found to be suitable for quality control analysis.

Solid-phase microextraction coupled to comprehensive multidimensional gas chromatography for food analysis

Solid-phase microextraction and comprehensive multidimensional gas chromatography represent two milestone innovations that occurred in the field of separation science in the 1990s. They have a common root in their introduction and have found a perfect coupling in their evolution and applications. This review will focus on food analysis, where the paradigm has changed significantly over time, moving from a targeted analysis, focusing on a limited number of analytes at the time, to a more holistic approach for assessing quality in a larger sense. Indeed, not only some major markers or contaminants are considered, but a large variety of compounds and their possible interaction, giving rise to the field of foodomics. In order to obtain such detailed information and to answer more sophisticated questions related to food quality and authenticity, the use of SPME-GC × GC-MS has become essential for the comprehensive analysis of volatile and semi-volatile analytes. This article provides a critical review of the various applications of SPME-GC × GC in food analysis, emphasizing the crucial role this coupling plays in this field. Additionally, this review dwells on the importance of appropriate data treatment to fully harness the results obtained to draw accurate and meaningful conclusions.

Comprehensive study of volatile compounds and transcriptome data providing genes for grape aroma

BACKGROUND

Fruit aroma is an important quality with respect to consumer preference, but the most important aroma compounds and their genetic regulatory mechanisms remain elusive.

RESULTS

In this study, we qualitatively analysed volatile compounds in the pulp and skin of five table grape cultivars with three aroma types (muscat, strawberry, and neutral) using solid-phase microextraction gas chromatography/mass spectrometry. We identified 215 aroma compounds, including 88 esters, 64 terpenes, and 29 alcohols, and found significant differences in the number of compounds between the pulp and skin, especially for terpenes. Skin transcriptome data for the five grape cultivars were generated and subjected to aroma compound-gene correlation analysis. The combined transcriptomic analysis and terpene profiling data revealed 20 candidate genes, which were assessed in terms of their involvement in aroma biosynthetic regulation, including 1 VvCYP (VIT_08s0007g07730), 2 VvCCR (VIT_13s0067g00620, VIT_13s0047g00940), 3 VvADH (VIT_00s0615g00010, VIT_00s0615g00030, VIT_ 00s0615g00020), and 1 VvSDR (VIT_08s0040g01200) in the phenylpropanoids synthesis pathway, and 1 VvDXS (VIT_05s0020g02130) and 6 VvTPS (VIT_13s0067g00370, Vitis_vinifera_newGene_3216, VIT_13s0067g00380, VIT_13s0084g00010, VIT_00s0271g00010, and VIT_13s0067g00050) in the methylerythritol phosphate pathway (involved in the production and accumulation of aromatic compounds). Additionally, 2 VvMYB (VIT_17s0000g07950, VIT_03s0063g02620) and 1 VvGATA (VIT_15s0024g00980) transcription factor played important regulatory roles in the accumulation of key biosynthetic precursors of these compounds in grapes. Our results indicated that downstream genes, specifically 1 VvBGLU (VIT_03s0063g02490) and 2 VvUGT (VIT_17s0000g07070, VIT_17s0000g07060) are involved in regulating the formation and volatilization of bound compounds in grapes.

CONCLUSIONS

The results of this study shed light on the volatile compounds and "anchor points" of synthetic pathways in the pulp and skin of muscat and strawberry grapes, and provide new insight into the regulation of different aromas in grapes.

Ionic Liquid-Assisted DLLME and SPME for the Determination of Contaminants in Food Samples

Developing effective and green methods for food analysis and separation has become an urgent issue regarding the ever-increasing concern of food quality and safety. Ionic liquids (ILs) are a new chemical medium and soft functional material developed under the framework of green chemistry and possess many unique properties, such as low melting points, low-to-negligible vapor pressures, excellent solubility, structural designability and high thermal stability. Combining ILs with extraction techniques not only takes advantage of ILs but also overcomes the disadvantages of traditional extraction methods. This subject has attracted intensive research efforts recently. Here, we present a brief review of the current research status and latest developments regarding the application of IL-assisted microextraction, including dispersive liquid–liquid microextraction (DLLME) and solid-phase microextraction (SPME), in food analysis and separation. The practical applications of ILs in determining toxic and harmful substances in food specimens with quite different natures are summarized and discussed. The critical function of ILs and the advantages of IL-based microextraction techniques over conventional extraction techniques are discussed in detail. Additionally, the recovery of ILs using different approaches is also presented to comply with green analytical chemistry requirements.

Modern Analytical Methods for the Analysis of Pesticides in Grapes: A Review

Currently, research on the determination of pesticides in food products is very popular. Information obtained from research conducted so far mainly concerns the development of a methodology to determine the content of pesticides in food products. However, they do not describe the content of the pesticide used in viticulture in the resulting product. Over the past decade, this study has examined analytical methodologies for assessing pesticide residues in grapes. Scopus, Web of Science, Science Direct, PubMed, and Springer databases were searched for relevant publications. The phrases “pesticides” and “grapes” and their combinations were used to search for articles. The titles and annotations of the extracted articles have been read and studied to ensure that they meet the review criteria. The selected articles were used to compile a systematic review based on scientific research and reliable sources. The need to study the detection of pesticide residues in grapes using advanced analytical methods is confirmed by our systematic review. This review also highlights modern methods of sample preparation, such as QuEChERS, SPME, PLE, dLLME, and ADLL-ME, as well as the most used methods of separation and identification of pesticides in grapes. An overview of the countries where residual grape pesticide amounts are most studied is presented, along with the data on commonly used pesticides to control pests and diseases in grape cultivation. Finally, future possibilities and trends in the analysis of pesticide residues in grapes are discussed by various analytical methods.

GNP/Al-MOF nanocomposite as an efficient fiber coating of headspace solid-phase micro-extraction for the determination of organophosphorus pesticides in food samples

The synthesis and utilization of a high porous nanocomposite comprising MIL-53(Al) metal-organic framework (Al-MOF) and graphene nanopowder (GNP) is reported as a fiber coating for headspace solid-phase micro-extraction (HS-SPME) of selected organophosphorus pesticides (OPPs) from apple, potato, grape juice, tomato, and river water. The adsorbed OPPs on the coated fiber were subsequently determined using GC-MS. Several parameters affecting the efficiency of extraction including time and temperature of extraction, desorption condition of extracted analytes, pH and agitation of sample solution, and salt concentration were investigated. The optimum extraction condition was achieved at 70 °C with an extraction time of 40 min, pH = 4-8, and NaCl concentration of 6.0% (w/v). The best condition of desorption were observed at 280 °C for 2.0 min under a flow of helium gas in the GC inlet. Under optimal conditions, the detection limits ranged from 0.2 to 1.5 ng g^-1 and the linear ranges between 0.8 and 600 ng g^-1. The proposed method showed very good repeatability with RSD values ranging from 4.5 to 7.3% (n = 5). The relative recoveries were between 88% and 109% at the spiked level of 25.0 ng g^-1 for the tomato sample. The fabricated fiber exhibited good enrichment factor (62-195) at optimum condition of HS-SPME. The applied HS-SPME technique is facile, fast, and inexpensive. The thermally stable GNP/Al-MOF exhibited a high sensitivity toward OPPs. So, this nanocomposite can be considered as a sorbent for the micro-extraction of other pesticides in food.

Sugar-Based Ionic Liquids: Multifaceted Challenges and Intriguing Potential

Carbohydrates represent a promising option in transitioning from oil-based chemical resources to renewable ones, with the goal of developing chemistries for a sustainable future. Cellulose, hemicellulose, and largely available monosaccharides already provide useful chemical building blocks, so-called platform chemicals, such as levulinic acid and hydroxymethyl furfural, as well as solvents like cyrene or gamma-valerolactone. Therefore, there is great anticipation for novel applications involving materials and chemicals derived from sugars. In the field of ionic liquids (ILs), sugar-based ILs have been overlooked for a long time, mainly on account of their multistep demanding preparation. However, exploring new strategies for accessing sugar-based ILs, their study, and their exploitation, are attracting increasing interest. This is due to the growing concerns about the negative (eco)toxicity profile of most ILs in conjunction with their non-sustainable nature. In the present review, a literature survey concerning the development of sugar-based ILs since 2011 is presented. Their preparation strategies and thermal behavior analyses, sorted by sugar type, make up the first two sections with the intention to provide the reader with a useful guide. A final overview of the potential applications of sugar-based ILs and their future perspectives complement the present analysis.

Overcoming matrix effects in the analysis of pyrethroids in honey by a fully automated direct immersion solid-phase microextraction method using a matrix-compatible fiber

Pyrethroids insecticides may constitute a major hazard to honeybees, leading to colony collapse disorder. However, the determination of pyrethroids in honey has remained a challenging undertaking for analysts to date due to the high complexity of this matrix as well as the MRLs. This paper presents a fully automated method to overcome matrix influences using matrix-compatible overcoated SPME fiber for quantitative analysis of pyrethroids in diluted honey by GC-MS. The developed method was optimized using a multivariate approach providing LOQ values much lower than the stablished MRL (0.10-10 ng/g), while granting satisfactory linearity (R² > 0.998) in a wide linear range of 0.1-2000 ng/g, repeatability with RSDs < 10%, reproducibility RSDs < 20%, and accuracy ranging from 75 to 118% and from 82 to 120 % for inter-day and intra-day assays, respectively by using five replicates. The method herein proposed overcomes challenges presented by complex matrices while minimizing sample handling and the overall complexity of the procedure.

Polyaniline/titanium dioxide nanorods functionalized carbon fibers for in-tube solid-phase microextraction of phthalate esters prior to high performance liquid chromatography-diode array detection

To improve extraction performance of carbon fibers (CFs) towards phthalate esters (PAEs), titanium dioxide (TiO₂) nanorods array was in-situ grown on the surface of CFs, then polyaniline (PANI) was used to modify it. PANI/TiO₂ nanorods-CFs were placed into a polyetheretherketone tube for solid-phase microextraction (SPME). Combining the tube to high performance liquid chromatography (HPLC), it was evaluated and displayed good extraction performance for several PAEs. Compared with bare CFs, TiO₂ nanorods and PANI, PANI/TiO₂ nanorods presented best performance, attributed to the unique advantages between high surface area of TiO₂ nanorods and multiple adsorption interactions (like π-π stacking, hydrogen bond) of PANI. After the optimization of the important factors (sampling volume, sampling rate, sample pH, concentrations of organic solvent and salt in sample, and desorption time), the online in-tube SPME-HPLC method was established. It provided low limits of detection (0.01-0.05 μg L^-1) and wide linear ranges (0.03-30, 0.10-30, 0.17-30 μg L^-1) with correlation coefficients larger than 0.9991. The relative standard deviations (n=6) between intra-day and inter-day tests were in the ranges of 3.5-10.3% and 4.7-13.9%, respectively. The method was successfully used to determine seven PAEs in real water samples. Besides of satisfactory durability, the material also exhibited superior extraction performance than some materials.

New Trend in the Extraction of Pesticides from the Environmental and Food Samples Applying Microextraction Based Green Chemistry Scenario: A Review

This review focused on the green microextraction methods used for the extraction of pesticides from the environmental and food samples. Microextraction techniques have been explored and applied in various fields of analytical chemistry since its beginning, as evinced by the numerous reviews published. The success of any technique in science and technology is measured by the simplicity, environmentally friendly, and its applications; and the microextraction technique is highly successive. Deliberations were attentive to studies where efforts have been made to validate the methods through the inter-laboratory comparison study to assess the analytical performance of microextraction techniques against conventional methods. Succinctly, developed microextraction methods are shown to impart significant benefits over conventional techniques. Provided that the analytical community continues to put forward attention and resources into the growth and validation of the microextraction technique, a promising future for microextraction is forecasted.

Supramolecular solvent-based micro-extraction of pesticides in food and environmental samples

Supramolecular solvent-based micro-extraction is a very important green technique for the isolation and pre-concentration of pesticide residues in food and environmental samples prior to their chromatographic analysis. The attractive features of supramolecular solvent-based micro-extraction include its simplicity, high pre-concentration factor, fastness, accuracy, low cost, less consumption of chemical reagents and environmental friendliness. The supramolecular solvent is generated from a ternary mixture of amphiphiles, water and a water miscible dispersion and coacervating solvent. Tehydrofuran is one of the solvents commonly used as both a dispersion solvent and a coacervating agent. This paper gives a recent comprehensive review on the application of alkanols as amphiphiles during supramolecular solvent-based micro-extraction of pesticide residues in food and environmental samples. Other researchers used long chain fatty acids as amphiphiles during pesticide analysis in food and environmental samples using supramolecular solvent-based micro-extraction, and this is discussed in this paper. The incorporation of ferrofluids in supramolecular solvents enables phase separation using a magnet instead of the time-consuming centrifugation technique. This paper also gives a detailed review of the application of ferrofluid-based supramolecular solvent micro-extraction of pesticide residues in food and environmental samples.

Polydimethylsiloxane/ionic liquid sponge used in headspace solid-phase extraction coupled with GC-MS for rapid analysis of essential oil in lavender

A headspace (HS) solid-phase extraction (SPE) based on polydimethylsiloxane (PDMS)/ionic liquid (IL) sponge was developed for the extraction of lavender essential oil. The PDMS after loading of 1-butyl-3-methylimidazolium tetrachloroferrate ([BMIM]FeCl₄ ) with a high surface area and excellent adsorption capacity was successfully applied in the SPE process. Microwave distillation (MD) coupled with HS-PDMS/[BMIM]FeCl₄ extraction after GC-MS was proposed. Various experimental parameters were studied. The optimal conditions were as follows: optimal IL, [BMIM]FeCl₄ ; volume ratio of IL to ethanol, 1:5; extraction solvent, n-hexane; microwave power, 600 W; and irradiation time, 12 min. The limits of detection and quantification of the analytic compounds were in the ranges 4.00-16.32 and 10.00-40.00 ng, respectively. The intra-day and inter-day precisions were in the ranges 0.37-1.94% and 1.20-2.45%, respectively. Under the optimized conditions, 13 samples of 3 lavender varieties were analyzed, and 40 compounds were identified. Lavender varieties were distinguished using principal component analysis. The results showed that MD-HS-PDMS/IL-GC-MS is a novel, simple, and sensitive method for the determination of essential oil in complex plant samples.

Deep eutectic solvent-based dispersive liquid-liquid micro-extraction of pesticides in food samples

Deep eutectic solvents are versatile, green and new generation solvents that can be used during dispersive liquid-liquid micro-extraction techniques for pesticides. They have tunable physico-chemical properties that can be easily changed by varying the ratios of hydrogen bond donors and hydrogen bond acceptors in their structures. Deep eutectic solvents are non-flammable, chemically and thermally stable solvents with low vapour pressure. Thus, they have characteristics that are similar to those of ionic liquids. However, they have simpler synthetic procedures, less expensive and are more biodegradable than ionic liquids. One of the limitations of deep eutectic solvents is their toxicity to the environment but they are less toxic than ionic liquids. This paper gives a focused and comprehensive recent review on the applications of deep eutectic solvents during dispersive liquid-liquid micro-extraction of pesticides in food samples for the period starting from 2016 to 2020. Emphasis was placed on the modifications done to the deep eutectic solvent-based dispersive liquid-liquid micro-extraction techniques in order to enhance their greenness during pesticide pre-concentration in food samples. In addition, hyphenated dispersive liquid-liquid micro-extraction techniques were also reviewed and lastly, the paper outlined the challenges associated with the use of DESs during the DLLME techniques.

Solid-Phase Microextraction Enables Isolation of BRAF V600E Circulating Tumor DNA from Human Plasma for Detection with a Molecular Beacon Loop-Mediated Isothermal Amplification Assay

Circulating tumor DNA (ctDNA) is a promising biomarker that can provide a wealth of information regarding the genetic makeup of cancer as well as provide a guide for monitoring treatment. Methods for rapid and accurate profiling of ctDNA are highly desirable in order to obtain the necessary information from this biomarker. However, isolation of ctDNA and its subsequent analysis remains a challenge due to the dependence on expensive and specialized equipment. In order to enable widespread implementation of ctDNA analysis, there is a need for low-cost and highly accurate methods that can be performed by nonexpert users. In this study, an assay is developed that exploits the high specificity of molecular beacon (MB) probes with the speed and simplicity of loop-mediated isothermal amplification (LAMP) for the detection of the BRAF V600E single-nucleotide polymorphism (SNP). Furthermore, solid-phase microextraction (SPME) is applied for the successful isolation of clinically relevant concentrations (73.26 fM) of ctDNA from human plasma. In addition, the individual effects of plasma salts and protein on the extraction of ctDNA with SPME are explored. The performed work expands the use of MB-LAMP for SNP detection as well as demonstrates SPME as a sample preparation tool for nucleic acid analysis in plasma.

Electrochemically Fabricated Solid Phase Microextraction Fibers and Their Applications in Food, Environmental and Clinical Analysis

Background:

Designing an analytical methodology for complicated matrices, such as biological and environmental samples, is difficult since the sample preparation procedure is the most demanding step affecting the whole analytical process. Nowadays, this step has become more challenging by the legislations and environmental concerns since it is a prerequisite to eliminate or minimize the use of hazardous substances in traditional procedures by replacing with green techniques suitable for the sample matrix.

Methods:

In addition to the matrix, the nature of the analyte also influence the ease of creating green analytical techniques. Recent developments in the chemical analysis provide us new methodologies introducing microextraction techniques and among them, solid phase microextraction (SPME) has emerged as a simple, fast, low cost, reliable and portable sample preparation technique that minimizes solvent consumption.

Results:

The use of home-made fibers is popular in the last two decades since the selectivity can be tuned by changing the surface characteristics through chemical and electrochemical modifications. Latter technique is preferred since the electroactive polymers can be coated onto the fiber under controlled electrochemical conditions and the film thicknesses can be adjusted by simply changing the deposition parameters. Thermal resistance and mechanical strength can be readily increased by incorporating different dopant ions into the polymeric structure and selectivity can be tuned by inserting functional groups and nanostructures. A vast number of analytes with wide range of polarities extracted by this means can be determined with a suitable chromatographic detector coupled to the system. Therefore, the main task is to improve the physicochemical properties of the fiber along with the extraction efficiency and selectivity towards the various analytes by adjusting the electrochemical preparation conditions.

Conclusion:

This review covers the fine tuning conditions practiced in electrochemical preparation of SPME fibers and in-tube systems and their applications in environmental, food and clinical analysis.

Solid phase microextraction as a powerful alternative for screening of secondary metabolites in actinomycetes

Actinobacteria are one of the most promising producers of medically and industrially relevant secondary metabolites. However, screening of such compounds in actinobacteria growth demands simple, fast, and efficient extraction procedures that enable detection and precise quantification of biologically active compounds. In this regard, solid phase microextraction (SPME) emerges as an ideal extraction technique for screening of secondary metabolites in bacteria culture due to its non-exhaustive, minimally invasive, and non-destructive nature: its integrated sample preparation workflow; balanced coverage feature; metabolism quenching capabilities; and superior cleanup, as well as its versatility in configuration, which enables automation and high throughput applications. The current work provides a comparison of micro-scale and direct immersion SPME (DI-SPME) for screening of secondary metabolites, describes the optimization of the developed DI-SPME method, and introduces the developed technique for mapping of target secondary metabolites as well as its direct coupling to mass spectrometry for such applications. The optimized DI-SPME method provided higher amounts of extracted ions and intensity signals, yielding superior extraction and desorption efficiency as compared with micro-scale extraction. Studied compounds presented stability on the coating for 24 h at room temperature. The DI-SPME mapping approach revealed that lysolipin I and the lienomycin analog are distributed along the center and edges of the colony, respectively. Direct coupling of SPME to MS provided a similar ions profile as SPME-LC-MS while enabling a significant decrease in analysis time, demonstrating its suitability for such applications. DI-SPME is herein presented as an alternative to micro-scale extraction for screening of secondary metabolites in actinobacteria solid medium, as well as a feasible alternative to DESI-IMS for mapping of biologic radial distribution of secondary metabolites and cell life cycle studies. Lastly, the direct coupling of DI-SPME to MS is presented as a fast, powerful technique for high throughput analysis of secondary metabolites in this medium.