Fabrication of a porous hydrangea-like Fe3O4@MnO2 composite for ultra-trace arsenic preconcentration and determination

Effect of K+ and Ca2+ Cations on Structural Manganese(IV) Oxide for the Aerobic Oxidation of 5-Hydroxymethylfurfural to 2,5-Furandicarboxylic Acid

The promising influences of K+ and Ca2+ ions in the development of effective MnO2 for the selective oxidation of 5-hydroxymethylfurfural to 2,5-furandicarboxylic acid (FDCA) were studied for the catalytic performance under a high-pressure reaction of aqueous O2 (0.5 MPa) in a basic system. Various oxidation states of manganese in MnO2 were able to accelerate the oxidation of 5-formyl-2-furancarboxylic acid to FDCA in the rate-determining step. The results were in good agreement that Ca2+ played a key role in the highest FDCA yield up to 85% due to the associated cations on the local coordination to enhance the high surface area and the electronic effect on the manganese ion. Both K-MnO2 and Ca-MnO2 catalysts showed excellent catalytic activities without a significant change in the efficiency in the reusability experiments.

Ultrasonic assisted magnetic solid phase extraction of ultra-trace mercury with ionic liquid functionalized materials

Due to the agglomeration between particles, the inherent adsorption characteristics of magnetic powder materials are usually difficult to fully display. Taking ionic liquid functional materials as an example, the enrichment behavior of these adsorbents for trace mercury (Hg²⁺) in ultrasonic (US) assisted dispersion mode was systematically studied. The dissociation of protonic ionic liquids (IL) occur in the process of dispersion and the strong electrostatic attraction can improve the diffusion and adhesion of mercury on the adsorbent surface. Spectral measurement data showed that with the help of US, the more uniform dispersion of magnetic materials accelerated the adsorption of trace Hg²⁺. Ultrasonic intrinsic parameters such as frequency, power and radiation duration significantly affect the dispersion and apparent adsorption properties of magnetic functional materials. In the range of experimental parameters, the dye/paper image experimental results documents that there is a positive correlation between cavitation effect and ultrasonic frequency/power. The enrichment degree of fixed adsorbate (0.1 μg L^-1) under high frequency (59 kHz) or high-power input (100%) is 1-2 times higher than that under low frequency (40 kHz) or low power (60%) input. This is a valuable conclusion for the subsequent study of US dispersion of magnetic and even non-magnetic powder materials. In addition, the in-situ desorption and accurate measurement of adsorbed mercury were realized by combining slurry vapor generation atomic fluorescence spectroscopy (SVG-AFS). The constructed US assisted magnetic solid phase extraction (US-MSPE) method has the characteristics of low detection limit (0.36 ng L^-1), high recovery (>90%), sustainable utilization (>3) and reasonable measurement deviation (<5%), which can meet the requirements of ultra-trace Hg²⁺ (0.01-1.0 μg L^-1).

Adsorptive remediation of environmental pollutants using magnetic hybrid materials as platform adsorbents

Effective separation and remediation of environmentally hazardous pollutants are burning areas of research because of a constant increase in environmental pollution problems. An extensive number of emerging contaminants in the environmental matrices result in serious health consequences in animals, humans, and plants, even at trace levels. Therefore, it is of paramount significance to quantify these undesirable pollutants, even at a very low concentration, from the natural environment. Magnetic solid-phase extraction (MSPE) has recently achieved huge attention because of its strong magnetic domain and easy separation through an external magnetic field compared with simple solid-phase extraction. Therefore, MSPE appeared the most promising technique for removing and pre-concentration of emerging pollutants at trace level. Compared to the normal solid-phase extraction, MSPE as magnetic hybrid adsorbents offers the unique advantages of distinct nanomaterials and magnetic hybrid materials. It can exhibit efficient dispersion and rapid recycling when applying to a very complex matrix. This review highlights the possible environmental applications of magnetic hybrid nanoscale materials as effective MSPE sorbents to remediate a diverse range of environmentally toxic pollutants. We believe this study tends to evoke a variety of research thrust that may lead to novel remediation approaches in the forthcoming years.

Ultrasound-assisted dispersive solid phase extraction for promoting enrichment of ng L-1 level Hg2+ on ionic liquid coated magnetic materials

Herein, we investigated the enrichment behavior of inorganic mercury (Hg²⁺) on magnetic adsorbent with different ultrasound (US) energy field input. The enrichment rate of 0.10 μg L^-1 mercury is increased by 4.5 times after US instead of stirring as dispersion mode. The input of higher frequency and power ultrasound can accelerate the enrichment of magnetic ionic liquid adsorbent and reduce the Hg²⁺ residue, importantly, which has not been reported. The positive correlation between cavitation effect and acoustic frequency and power in imaging experiments documents that US parameters are the key factors affecting the magnetic solid phase extraction. In addition, in-situ desorption and detection of adsorbate and recovery of adsorbent can be realized by slurry vapor generation (SVG) technology. The recovery of Hg²⁺ in four cycles is more than 90%, which indicates that the structure and properties of the material are not affected by the application of US. Hence, the degradation of adsorption properties caused by agglomeration of magnetic materials can be improved by introducing dispersion methods such as US. At the same time, 95% enrichment efficiency and 0.01-1.0 μg L^-1 linear calibration range corresponding to 150 mL sample documents that magnetic ionic liquid adsorbent combined with US and sensitive spectral detector can meet the needs of ng L^-1 level Hg²⁺ analysis in natural water samples.

Magnetically steerable iron oxides-manganese dioxide core-shell micromotors for organic and microplastic removals

Because of micro/nanoscale manipulation and task-performing capability, micro/nanomotors (MNMs) have attracted lots of research interests for potential applications in biomedical and environmental applications. Owing to the low-cost, good motion behavior, and environmental friendliness, various low-cost metal oxides based MNMs become promising alternatives to the precious metal based MNMs, in particular for environmental remediation applications. Hereby, we demonstrate the facile and scalable fabrication of two types of bubble-propelled iron oxides-MnO₂ core-shell micromotors (Fe₃O₄-MnO₂ and Fe₂O₃-MnO₂) for pollutant removal. The Fe₂O₃-MnO₂ micromotor exhibits efficient removals of both aqueous organics and suspended microplastics via the synergy of catalytic degradation, surface adsorption, and adsorptive bubbles separations mechanisms. The adsorptive bubbles separation achieved more than 10% removal of the suspended microplastics from the polluted water in 2 h. We clarified the major contributions of different remediation mechanisms in pollutants removals, and the findings may be beneficial to a wide range of environmental applications of MNMs.

Magnetite-based catalysts for wastewater treatment

The increasing number and concentration of organic pollutants in water stream could become a serious threat in the near future. Magnetite has the potential to degrade pollutants via photocatalysis with a convenient separation process. This study discusses in detail the control size and morphology of magnetite nanoparticles, and their composites with co-precipitation, hydrothermal, sol-gel, and electrochemical route. Further photocatalytic enhancement with the addition of metal and porous support was proposed. This paper also discussed the technology to extend the lifetime of recombination through an in-depth explanation of charge transfer. The possibility to use waste materials as catalyst support was also elucidated. However, magnetite-based photocatalysts still require many improvements to meet commercialization criteria.

Rapid extraction of arsenic species from traditional Chinese herbal by dual-frequency ultrasound-assisted enzymatic digestion prior to spectral analysis

Considering the huge difference of biological toxicity, it is extremely significant to recognize the exact content of arsenic species in actual samples. In this paper, a novel pretreatment technique for the efficient extraction of arsenic species from herbal samples is developed by dual-frequency ultrasound-assisted enzymatic digestion (DUED). The preservation of arsenic original form, reduction of the actual analysis time, environmental friendliness and free-interference in subsequent detection make this method over the traditional method such as wet digestion, ashing and some solvent extraction technologies. The combination of DUED and atomic fluorescence spectrometry realize the speciation analysis of arsenic in traditional Chinese medicine. The optimizations of experimental parameters have been achieved, and the potential mechanism is discussed. The experimental data showed that cellulase is suitable for the digestion of herbal matrix than α-amylase and papain. Ultrasound can significantly increase the rate of enzymatic hydrolysis of biological molecules, especially under dual-frequency ultrasound irradiation. The highest relative extraction efficiency can be obtained by combining 40 kHz ultrasonic bath (UB) with 20 kHz ultrasonic probe (UP). Two certified reference materials [CRMs, GBW(E)090066 and GBW(E)090067] and four practical herbs were used to evaluate the accuracy and practicability of the method. Inorganic arsenic, including trivalent arsenic and pentavalent arsenic, was the main species in the four herbal samples.

Magnetic graphitic carbon nitride nano-composite for ultrasound-assisted dispersive micro-solid-phase extraction of Hg(II) prior to quantitation by atomic fluorescence spectroscopy

A nanosheet structure of Fe₃O₄/g-C₃N₄ magnetic composite has been prepared and utilized as adsorbent for the ultrasound-assisted dispersive magnetic micro-solid-phase extraction of the ultra-trace inorganic mercury [Hg(II)]. Scanning electron microscopy, transmission electron microscopy, X-ray diffraction and Fouries transform infrared spectroscopy images manifested that the hydrothermal systhesis promoted the binding of Fe₃O₄ particles with g-C₃N₄. The enrichment performance of composites depended on their compositions, and the recovery of Hg(II) on C-m30 (with Fe₃O₄/g-C₃N₄ mass ratio 2:3) was higher than that on other ratios. Recorded data showed that ultrasound wave was an effective method for reducing the agglomeration of magnetic materials and enhancing their adsorption properties. The Hg signal obtained by 80% power input is 3.2 times stronger than the signal by strring mode. X-ray diffraction characterization of the recovered adsorbent showed that g-C₃N₄ needed to be updated after repeated use for four times. In addition, competitive adsorption may be main factor affecting the inhibitory effect of high concentration methylmercury on inorganic mercury. Under the optimized conditions, the detection limit of the proposed method was 1.4 ng L^-1 and relative standard deviation of 4.6% for 0.05 μg L^-1 Hg(II) was obtained. The linear calibration range was 0.005-0.4 μg L^-1. The accuracy of the method was verified through analysis of the certificated reference materials. The proposed method has been applied in the determination of inorganic Hg in natural water samples.