Study of Bi-directional detection for ascorbic acid and sodium nitrite based on Eu-containing luminescent polyoxometalate

Gold nanoclusters decorated hollow ZIF-8 encapsulating iron-catecholates as oxidase mimetics for ratiometric colorimetric detection of nitrite

Gold nanoclusters decorated hollow ZIF-8 encapsulating iron-catecholates (Fe-HHTP@HZIF-8@ AuNCs) was formed through self-assembly of Fe3+ and 2,3,6,7,10,11-hexahydroxytriphenylene (HHTP), in situ embedding of ZIF-8, and Au3+-Zn2+ exchange reaction. Its morphology and structure were fully characterized by high-resolution transmission electron microscopy, X-ray diffraction, transmission electron microscopy element mapping, and X-ray photoelectron spectroscopy. Additionally, its oxidase-like activity was explored with Km of 0.21 mM and Vmax of 1.74 × 10-6 M·s-1 toward 3,3',5,5'-tetramethylbenzidine (TMB). Due to its excellent catalytic activity and nitrite mediated diazotization of oxTMB, a ratiometric colorimetric method for nitrite detection was established and validated with wide linear range (2.0-400.0 μM), low LOD (0.12 μM), high accuracy (recovery of 95.11-102.14%), and good selectivity. This method was then utilized to determine the nitrite content in sausages and tap water. This study provided a new idea for developing efficient nanozymes and offered an accurate approach for nitrite determination.

Pyrazine Dicarboxylic Acid and Phosphite-Bridging Lanthanide-Incorporated Tellurotungstates and Their Fluorescence Performances

Two pyrazine dicarboxylic acid and phosphite-bridging lanthanide-incorporated tellurotungstates [H2N(CH3)2]12 Na4[Ln4(H2O)2(H2PDBA)2(HPO3)2W6O10][B-α-TeW8O31]4 · 70H2O [Ln = Eu3+ (1), Tb3+ (2); H2PDBA = 2,5-pyrazine dicarboxylic acid) were prepared, which contain four [B-α-TeW8O31]10- subunits and a deca-nuclear heterometallic [Ln(H2O)2(HPO3)2 (H2PDBA)2(W3O5)2]24+ cluster. Strikingly, two H2PDBA ligands connect two equivalent {W3Eu2O5(H2O)(B-α-TeW8O31)2(HPIIIO3)}8- moieties to form the polyanion skeleton, while the phosphite plays a bridging role in joining two lanthanide centers in the {W3Eu2O5(H2O)(B-α-TeW8O31)2(HPIIIO3)}8- moiety. In addition to the fluorescence (FL) properties of 1 and 2 at room temperature, their temperature-dependent FL properties were also investigated. In 80-298 K, FL intensities of 1 and 2 decrease as temperature increases, and their maximum relative sensitivities (Sr) are 3.70 and 1.99% K-1, whereas the minimum temperature uncertainties (δT) are 1.25 and 1.18 K for 1 and 2. In 298-973 K, upon increasing temperature, FL intensities of 1 and 2 initially rise to their maxima at 373 K and subsequently decrease. This is because samples of 1 and 2 undergo dehydration together with amorphization below 473 K and decomposition above this temperature. This work lays a foundation for the development for luminescent thermometers based on lanthanide-incorporated polyoxometalates.

Cellulose-based yellow-green emitting carbon dots with large Stokes shift as effective "turn off-on" fluorescence platforms for Cr (VI) and AA dual efficacy detection

BACKGROUND

Hexavalent chromium (Cr (VI)) is highly carcinogenic to humans. Ascorbic acid (AA) deficiency can be hazardous to health. And the dual-effect fluorescence detection of them is an important research topic. Carbon dots (CDs) based on cellulose are excellent candidates for the fluorescence probes due to their low cost and environmental friendliness. But most of them exhibit shortwave emission, small Stokes shift and poor fluorescence performance, all of which limit their use. Therefore, there is an urgent need for cellulose CDs with longer emission wavelengths and larger Stokes shifts in dual-effect fluorescence detection of Cr (VI) and AA.

RESULTS

Under optimal conditions (180 °C, 12 h), we prepared cellulose-based nitrogen-doped carbon dots (N-CDs) by a simple one-step hydrothermal process, which display longer emission wavelengths (ex: 370 nm, em: 510 nm), larger Stokes shifts (140 nm) and high fluorescence quantum yield (QY: 19.27 %). The continuous "turn-off" and "turn-off-on" fluorescence detection platforms were constructed based on the internal filtering effect (IFE) between Cr6+ and N-CDs, and Cr6+ reduced to Cr3+ by AA at pH = 6. The platform has been successfully simultaneous detect Cr (VI) and AA with a wide range of 0.01-40 μM and 0.1-100 μM. And the lowest limits of detection (LOD) are 0.0303 μM and 0.072 μM, respectively. In the presence of some other metals, non-metal ions and water-soluble acids in the fruits, this fluorescent platform can demonstrate a high level of interference immunity.

SIGNIFICANCE AND NOVELTY

This represents the first yellow-green cellulose-based N-CDs with large Stokes shift for dual-effect detection of Cr (VI) and AA in real water samples and fresh fruits. The fluorescence detection platform has the advantage of low volume detection. Less than 2 mL of sample is required for testing and results are available in <5 min. This method is rare and supply a novel idea for the quantitative monitoring of Cr (VI) and AA.

Biomass based nanofiber membrane composite with xylan derived carbon dots for fluorescence detection nitrite in food real samples

In our latest research endeavor, we are proud to present an innovative approach to the synthesis of carbon dots (CDs) derived from the biomass xylan, which we have termed P-CDs. These P-CDs are meticulously integrated with a state-of-the-art biomass nanofiber membrane composed of polycaprolactone (PCL) and polylactic acid (PLA), resulting in the creation of a novel solid-state fluorescent sensor, designated as NFP-CDs. This cutting-edge sensor has been meticulously engineered for the highly sensitive and specific detection of nitrite ions (NO2-), a critical parameter in various fields. The NFP-CDs sensor stands out for its user-friendly design, cost-effective production, and portable nature, making it an ideal choice for rapid and visible nitrite ion detection. It exhibits an extraordinary response time of less than 1 s, which is a testament to its high sensitivity. Furthermore, the sensor demonstrates exceptional selectivity and specificity, with a remarkably low detection threshold of 0.36 μM. This is achieved through a sophisticated dual detection mechanism that synergistically combines colorimetric and spectral analyses, ensuring accurate and reliable results. In addition to its impressive technical specifications, the NFP-CDs sensor has been rigorously tested and validated for its efficacy in detecting nitrite ions in real-world samples. These samples include a diverse range of food products such as rock sugar, preserved mustard, kimchi, and canned fish. The sensor has demonstrated a remarkable recovery rate, which varies from 99 % to 106 %, highlighting its potential for practical application in nitrite ion detection. This research not only offers a robust and effective strategy for the detection of nitrite ions but also carries profound implications for enhancing food safety and bolstering environmental monitoring efforts. The development of the NFP-CDs sensor represents a significant step forward in the field of sensor technology, providing a powerful tool for the detection of nitrite ions and contributing to the broader goals of public health and environmental stewardship.

A chemiluminescence method induced by microplasma jet for nitrites detection and the miniature detection system using smartphone

A method of luminol-diazonium chemiluminescence (CL) induced by microplasma for hazardous substance detection is proposed. The luminol-diazonium CL is caused by microplasma jet, rather than hydrogen peroxide reagent or other oxidizing agents. The CL intensity is increased by the concentration of nitrites. Based on the process of microplasma generation and CL mechanism, the optimal work conditions of the method are obtained. The linear range for nitrites detection is 0.03-1 mmol L^-1 with the limit of detection (LOD) of 0.01 mmol L^-1. Furthermore, a miniature system using test paper and smartphone is designed for nitrites detection in emergency. The detection system is confined in the custom-tailored shell which is only 28 cm in length, 18 cm in width and 10 cm in height. After microplasma jet treatment, the color of the test paper changes with the NO₂^- concentration. The photographs of the test paper are taken by the built-in camera of smartphone and analyzed by visiting the website via smartphone. The LOD is 1 mmol L^-1 obtained by the CL miniature detection system based on test paper and smartphone. The accuracy, reliability and practicability of the proposed method is verified in this paper.

The target-induced redox and diazotized reaction for colorimetric ratio detection of nitrite using CoOOH nanosheets as mimetic oxidase

Nitrite is a commonly used food additive and water contaminant that has received widespread attention due to its harmful effects on humans. Here, a colorimetric ratio sensing platform for the detection of nitrite in foods as well as aquatic systems was developed via the catalytic oxidation of 3,3',5,5'-tetramethylbenzidine (TMB) by CoOOH nanosheets (CoOOH NSs). Interestingly, in the presence of nitrite, TMB complexes in acidic environments can be oxidized and diazotized to produce yellow oxidized TMB (oxTMB) and diazotized TMB, resulting in the nitrite concentration-dependent ratio variation for the absorbance peaks at 655 and 450 nm (A₆₅₅/A₄₅₀). The colorimetric ratio sensing offers higher sensitivity and better selectivity compared to conventional detection methods because of the specific target-induced reduction-oxidation and diazotized reaction, as well as the excellent mimetic oxidase activity of CoOOH NSs. Based on this strategy, a smartphone-assisted portable approach was designed for the in-situ/visual detection of nitrite, which has good application prospects.

A dual-mode system based on molybdophosphoric heteropoly acid and fluorescent microspheres for the reliable and ultrasensitive detection of alkaline phosphatase

A novel colorimetric and fluorescent dual-mode sensing system based on molybdophosphoric heteropoly acid (PMA) and fluorescent microspheres (FMs) was established for monitoring the activity of alkaline phosphatase (ALP). In the presence of ALP, L-ascorbic acid-2-phosphate (AAP) could be hydrolyzed catalytically to ascorbic acid (AA), which could reduce PMA to phosphorus molybdenum blue (PMB), accompanied by the generation of colorimetric signals depending on the level of ALP. Meanwhile, the fluorescence of FMs was quenched markedly by the PMB produced due to the inner-filter effect, which constituted the response mechanism for the dual-mode sensing systems of ALP. On this basis, a PMA-FMs based dual-mode sensing system was used for the detection of ALP, which not only possessed remarkable sensitivity, with a limit of detection of 0.27 U L^-1 and 0.11 U L^-1, but also exhibited good analytical performance in biological samples with satisfactory results. Moreover, a simple and portable test kit for the visual detection of ALP in real serum samples was fabricated utilizing a smartphone with image-recognition and data-processing capabilities as a visual-detection platform.

Ultrathin g-C3N4 nanosheet-CoOOH nanocomposite for fluorescence imaging of ascorbic acid in living cells

Ascorbic acid (AA), a critical cellular metabolite involved in many biochemical pathways, is an important antioxidant in human body. Therefore, it is of great significance to monitor AA in living cells. Nowadays, there are various technologies developed for the detection of AA, but few methods could sensitively and selectively detect the intracellular AA. Here, we reported a highly efficient biosensor (g-C₃N₄-CoOOH nanocomposite) based on ultrathin graphitic carbon nitride (g-C₃N₄) nanosheets and CoOOH nanoflakes, for sensitive detection and fluorescence imaging of AA in living cell. The g-C₃N₄ used here as fluorescence donor is a promising bioimaging nanomaterial because of their high fluorescence quantum yield, good biocompatibility and low toxicity. In addition, the CoOOH was used to be perfect fluorescence quencher. Herein, we enabled the CoOOH in situ to form a layer on the surface of g-C₃N₄, resulting in fluorescence quench of the g-C₃N₄. Upon the addition of AA, the CoOOH nanoflakes were reduced to Co²⁺, and the system gave a "turn on" fluorescence signal. It developed as an efficient sensing platform for AA, and the linear range was from 5 to 50 μM with a 1.6 μM detection limit. This novel biosensor, g-C₃N₄-CoOOH nanocomposite exhibited highly selective response toward AA relative to other biomolecules. Furthermore, this biosensor was used successfully to visualize and monitor AA in living cells. Hopefully, we believe that this biosensor would provide a low-cost and highly sensitive platform for AA detection and bioimaging. Schematic illustration of the sensing strategy based on the g-C₃N₄-CoOOH nanocomposite for AA detection.

Polyoxometalate-based materials in extraction, and electrochemical and optical detection methods: A review

Polyoxometalates (POMs) as metal-oxide anions have exceptional properties like high negative charges, remarkable redox abilities, unique ligand properties and availability of organic grafting. Moreover, the amenability of POMs to modification with different materials makes them suitable as precursors to further obtain new composites. Due to their unique attributes, POMs and their composites have been utilized as adsorbents, electrodes and catalysts in extraction, and electrochemical and optical detection methods, respectively. A survey of the recent progress and developments of POM-based materials in these methods is therefore desirable, and should be of great interest. In this review article, POM-based materials, their properties as well as their identification methods, and analytical applications as adsorbents, electrodes and catalysts, and corresponding mechanisms of action, where relevant, are reviewed. Some current issues of the utilization of these materials and their future prospects in analytical chemistry are discussed.

Polyoxometalate Functionalized Sensors: A Review

Polyoxometalates (POMs) are a class of metal oxide complexes with a large structural diversity. Effective control of the final chemical and physical properties of POMs could be provided by fine-tuning chemical modifications, such as the inclusion of other metals or non-metal ions. In addition, the nature and type of the counterion can also impact POM properties, like solubility. Besides, POMs may combine with carbon materials as graphene oxide, reduced graphene oxide or carbon nanotubes to enhance electronic conductivity, with noble metal nanoparticles to increase catalytic and functional sites, be introduced into metal-organic frameworks to increase surface area and expose more active sites, and embedded into conducting polymers. The possibility to design POMs to match properties adequate for specific sensing applications turns them into highly desirable chemicals for sensor sensitive layers. This review intends to provide an overview of POM structures used in sensors (electrochemical, optical, and piezoelectric), highlighting their main functional features. Furthermore, this review aims to summarize the reported applications of POMs in sensors for detecting and determining analytes in different matrices, many of them with biochemical and clinical relevance, along with analytical figures of merit and main virtues and problems of such devices. Special emphasis is given to the stability of POMs sensitive layers, detection limits, selectivity, the pH working range and throughput.

Polyoxometalates in Analytical Sciences

Polyoxometalates (POMs) have been used for spectrophotometric determinations of silicon and phosphorus under acidic conditions, referred to as the molybdenum yellow method and molybdenum blue method, respectively. Many POMs are redox active and exhibit fascinating but complicated voltammetric responses. These compounds can reversibly accommodate and release many electrons without exhibiting structural changes, implying that POMs can function as excellent mediators and can be applied to sensitive determination methods based on catalytic electrochemical reactions. In addition, some rare-earth-metal-incorporated POMs exhibit fluorescence, which enables sensitive determination by the enhancement and quenching of fluorescence intensities. In this review, various analytical applications of POMs are introduced, mainly focusing on papers published after 2000, except for the molybdenum yellow method and molybdenum blue method.

Polyelectrolyte-functionalized reduced graphene oxide wrapped helical POMOF nanocomposites for bioenzyme-free colorimetric biosensing

For the sake of effective colorimetric sensing-pattern, a sensitive colorimetric sensor was conceived based on polyoxometalates based metal-organic frameworks (POMOFs) and polydiallyldimethylammonium chloride functionalized reduced graphene oxide (PDDA-rGO) for the first time, in which PDDA as a "glue" molecule turns rGO nanosheets into general platforms for bonding POMOFs nanoparticles. Herein, a new POMOF compound with fascinating helices-on-helices feature, [Ni₄(Trz)₆(H₂O)₂][SiW₁₂O₄₀]^.4H₂O (Trz = 1,2,4-triazole) (abbreviated as Ni₄SiW₁₂), was synthesized and characterized, then PDDA-rGO sheet as dispersive and conductive material was successfully introduced to Ni₄SiW₁₂ fabricating new PDDA-rGO/Ni₄SiW₁₂-n nanocomposites, (abbreviated as PMPG-n). The resulting PMPG-n nanocomposites as peroxidase mimetic show excellent catalytic activities under extreme condition (pH value 2.5), attributed to the nature and synergies from POMs, MOFs and PDDA-rGOs. Note that the peroxidase-like activity of PMPG-1 (the mass ratio of Ni₄SiW₁₂ to PDDA-rGO is 1:1) exhibits higher sensitivity (1-60 μM), faster response (10 min) and the lowest limit of detection (2.07 μM) among all reported materials to citric acid (CA) to date. This work opens up new application prospects in colorimetric sensing system for food quality control and safety, biotechnology and clinical diagnosis.

An unprecedented polyhydroxycarboxylic acid ligand bridged multi-EuIII incorporated tellurotungstate and its luminescence properties

The first polyhydroxycarboxylic acid ligand bridged multi-EuIII-incorporated tellurotungstate K14H10[Eu4(H2O)4W6(H2glu)4O12(B-α-TeW9O33)4]·60H2O (H6glu = d-gluconic acid) (1) was synthesized via an organic ligand-driven self-assembly strategy. The polyhydroxycarboxylic acid ligand bridged tetrameric polyoxoanion [Eu4(H2O)4W6(H2glu)4O12(B-α-TeW9O33)4]24- in 1 can be viewed as an aggregation of four trivacant Keggin [B-α-TeW9O33]8- fragments and an innovative heterometallic [Eu4(H2O)4W6(H2glu)4O12]8+ cluster, in which four high-coordinate polyhydroxy flexible H2glu4- ligands chelate W and Eu centers through carboxyl and hydroxyl groups, giving rise to a heterometallic cluster. The hexagonal packing of the tetrameric polyoxoanions in 1 along the c axis provides excellent porous channels, which greatly increases the specific surface area of the whole framework and may be of benefit for fluorescence sensing in aqueous solution. 1 can function as a "turn-off" luminescence sensor to detect Cu2+ ions in aqueous solution. The limit of detection (LOD) of the 1-sensor is 8.82 × 10-6 mM, which is the lowest among the reported polyoxometalate-based fluorescence sensors. As for the Cu2+-quenching system, it can function as an "off-on" sensor to detect cysteine in an aqueous system, affording a LOD of 1.75 × 10-4 mM. This work opens up an avenue to broaden the applications of polyoxometalate-based materials in the optical intelligence detection field.

A polypyrrole-coated eightfold-helical Wells-Dawson POM-based Cu-FKZ framework for enhanced colorimetric sensing

To explore a novel colorimetric biosensor with high sensibility and selectivity, a new Wells-Dawson-type polyoxometalate (POM)-based metal-organic framework (MOF) with an eightfold helix, [Cu₉(FKZ)₁₂(H₂O)₈][H₃P₂W₁₈O₆₂]₂·4H₂O (CuFKZP₂W₁₈) (HFKZ = 1-(2,4-difluorophenyl)-1,1-bis[(1H-1,2,4-triazol-1-yl)methyl] ethanol), was successfully synthesized; then, polypyrrole (PPy) was introduced to fabricate CuFKZP₂W₁₈/PPy(n) nanocomposites (n = 7%, 15%, 30%) via a facile in situ oxidation polymerization process. All the results indicate that CuFKZP₂W₁₈/PPy(15%) as a colorimetric biosensor exhibits lower limits of detection (0.07 μM towards H₂O₂ and 0.627 μM towards ascorbic acid), smaller K_m values (0.106 mM for H₂O₂ and 0.042 mM for o-phenylenediamine) and higher sensitivity (0.0227 1 μM^-1 towards H₂O₂ and 0.0025 1 μM^-1 to ascorbic acid) than most reported enzyme mimetics to the best of our knowledge.

Polyoxometalate-based composite materials in electrochemistry: state-of-the-art progress and future outlook

Polyoxometalates (POMs) have been developed as a class of promising smart material candidates not only due to their multitudinous architectures but also their good redox activities and outstanding electron and proton transport capacities. Recently, abundant studies on POMs composited with metal nanoparticles (NPs), carbon materials (e.g., carbon nanotubes (CNTs), carbon quantum dots (CQDs), graphene), and conducting polymers or highly-porous framework materials (e.g., MOFs, ZIFs) have been performed and POM-based composite materials (PCMs) undoubtedly show enhanced stability and improved electrochemical performances. Therefore, POMs and PCMs are of increasing interest in electrocatalysis, electrochemical detection and energy-related fields (such as fuel cells, redox flow batteries and so on), thus, developing novel PCMs has long been the key research topic in POM chemistry. This review mainly summarizes some representative advances in PCMs with electrochemical applications in the past ten years, expecting to provide some useful guidance for future research.