Evaluation of a magnetic activated charcoal modified with non-ionic silicone surfactant as a new magnetic solid phase extraction sorbent with triazine herbicides as model compounds in selected milk and rice samples

A magnetic imprinted polymer nano-adsorbent with embedded quantum dots and mesoporous carbon for the microextraction of triazine herbicides

A magnetic molecularly imprinted polymer (MMIP) adsorbent incorporating amino-functionalized magnetite nanoparticles, nitrogen-doped graphene quantum dots and mesoporous carbon (MIP@MPC@N-GQDs@Fe3O4NH2) was fabricated to extract triazine herbicides from fruit juice. The embedded magnetite nanoparticles simplified the isolation of the adsorbent from the sample solution. The N-GQDs and MPC enhanced adsorption by affinity binding with triazines. The MIP layer provided highly specific recognition sites for the selective adsorption of three target triazines. The extracted triazines were determined by high-performance liquid chromatography (HPLC) coupled with diode-array detection (DAD). The developed method exhibited linearity from 1.5 to 100.0 µg L-1 with a detection limit of 0.5 µg L-1. Recoveries from spiked fruit juice samples were in the range of 80.1- 108.4 %, with a relative standard deviation of less than 6.0 %. The developed MMIP adsorbent demonstrated good selectivity, high extraction efficiency, ease of fabrication and use, and good stability.

Insights into interaction of triazine herbicides with three kinds of different alkyl groups (simetryne, ametryn and terbutryn) with human serum albumin via multi-spectral analysis

In this study, the interaction of triazine herbicides with three kinds of different alkyl groups (simetryne, ametryn and terbutryn) with human serum albumin (HSA) are investigated through UV-vis, fluorescence, and circular dichroism (CD) spectra. The mechanisms on the fluorescence quenching of HSA initiated by triazine herbicides are obtained using Stern-Volmer, Lineweaver-Burk and Double logarithm equations. The quenching rate constant (Kq), Stern-Volmer quenching constant (Ksv), binding constant (KA), thermodynamic parameters such as enthalpy change (∆H), entropy change (∆S) and Gibbs free energy (∆G) and number of binding site (n) are calculated and compared. The variations in the microenvironment of amino acid residues are studied by synchronous fluorescence spectroscopy. The binding sites and subdomains are identified using warfarin and ibuprofen as site probes. The conformational changes of HSA are measured using CD spectra. The results reveal that the triazine herbicides with different alkyl groups can interact with HSA by static quenching. The combination of the three herbicides and HSA are equally proportional, and the binding processes are spontaneous. Hydrophobic interaction forces play important roles in simetryne-HSA and ametryn-HSA, while the interaction of terbutryn-HSA is Van der Waals forces and hydrogen bonding. Moreover, the three herbicides can bind to HSA at site I (sub-domain IIA) more than site II (subdomain IIIA), and combine with tryptophan (Trp) more easily than tyrosine (Tyr) residues, respectively. By comparison, the order of interaction strength is terbutryn-HSA > ametryn-HSA > simetryne-HSA. Terbutryn can destroy the secondary structure of HSA more than simetryne and ametryn, and the potential toxicity of terbutryn is higher. It is expected that the interactions of triazine herbicides with HSA via multi-spectral analysis can offer some valuable information for studying the toxicity and the harm of triazine herbicides on human health at molecular level in life science.

Porous poly(bismaleimide-co-divinylbenzene) microspheres as dispersive solid-phase extraction adsorbent coupled to high-performance liquid chromatography for the determination of triazine herbicide residues in vegetable samples

In this work, monodisperse and nano-porous poly(bismaleimide-co-divinylbenzene) microspheres with large specific surface area (427.6 m2 /g) and rich pore structure were prepared by one-pot self-stable precipitation polymerization of 2,2'-bis[4-(4-maleimidophenoxy) phenyl] propane and divinylbenzene. The prepared poly(bismaleimide-co-divinylbenzene) microspheres were employed as dispersive solid-phase extraction (DSPE) adsorbent for the extraction of triazine herbicides. Under optimized conditions, good linearities were obtained between the peak area and the concentration of triazine herbicides in the range of 1-400 µg/L (R2 ≥ 0.9987) with the limits of detection of 0.12-0.31 µg/L. Triazine herbicides were detected using the described approach in vegetable samples (i.e., cucumber, tomato, and maize) with recoveries of 93.6%-117.3% and relative standard deviations of 0.4%-3.5%. In addition, the recoveries of triazine herbicides remained above 80.7% after being used for nine DSPE cycles, showing excellent reusability of poly(bismaleimide-co-divinylbenzene) microspheres. The adsorption of poly(bismaleimide-co-divinylbenzene) microspheres toward triazine herbicides was a monolayer and chemical adsorption. The adsorption mechanism between triazine herbicides and adsorbents might be a combination of hydrogen bonding, electrostatic interaction, and π-π conjugation. The results confirmed the potential use of the poly(bismaleimide-co-divinylbenzene) microspheres-based DSPE coupled to the high-performance liquid chromatography method for the detection of triazine herbicide residues in vegetable samples.

Preparation and evaluation of a chitosan modified biochar as an efficient adsorbent for pipette tip-solid phase extraction of triazine herbicides from rice

The low allowable limit of triazine herbicides (THs) in rice makes it imperative to develop novel sample pretreatment methods for extraction and preconcentration of THs. Herein, a phosphoric acid activated biochar (PBC) was prepared and modified by chitosan (CS). For THs with different polarities, CS-PBC with multiple interaction sites exhibited satisfactory chemisorption. On this basis, a CS-PBC-based pipette tip-solid phase extraction (PT-SPE) was developed combined with HPLC to extract THs from rice. Low limits of detection (1.41-3.35 ng g^-1), satisfactory linearity (0.01-2.00 μg g^-1, R² > 0.9974) and recoveries (96.13-116.25 %) were obtained with acceptable inter-day and intra-day precision (RSD ≤ 13.60 %). CS-PBC showed superior performance to three commercial single-mode adsorbents and comparable results to a hydrophilic-lipophilic balance adsorbent. The study explored the feasibility of PT-SPE for extracting THs from rice and broadened the application of plant biochar as an environmentally-friendly matrix in food sample pretreatment.

Exploring a novel silicone surfactant-based deep eutectic solvent functionalized magnetic iron particles for the extraction of organophosphorus pesticides in vegetable samples

The current study discussed the use of silicone surfactant-based deep eutectic solvent as a surface modifier for magnetic iron particles (Fe₃O₄) to produce a novel adsorbent and its application for the extraction of organophosphorus pesticides (OPPs) in vegetable samples. A deep eutectic solvent (DES) was prepared using low toxic and inexpensive substances such as silicone surfactant (SS) and dodecanoic acid (DoAc). This new eco-friendly SS:DoAc based DES was explored as a substitution to traditional organic reagents for surface modification of Fe₃O₄ to increase the adsorption capacity and to reduce the matrix interferences, hazardous waste generation and environmental pollution. The newly synthesized SS:DoAc@Fe₃O₄ adsorbent was successfully characterized and applied in magnetic solid phase extraction (MSPE). Under optimized conditions, the proposed approach exhibited excellent linearity ranging from 0.1 to 200 µg/kg (R² ≥ 0.9970), low detection limit (0.03-0.1 µg/kg) and acceptable relative recovery (80-119 %) for the studied OPPs.

Trace detection of organophosphorus pesticides in vegetables via enrichment by magnetic zirconia and temperature-assisted ambient micro-fabricated glow discharge plasma desorption ionization mass spectrometry

In this study, an innovative rapid detection technology for quickly screening and quantifying organophosphorus pesticides (OPPs) in vegetables was developed based on ambient micro-fabricated glow discharge plasma desorption/ionization mass spectrometry (MFGDP-MS), where Fe₃O₄/ZrO₂ synthesized by a one-step coprecipitation was used for enrichment. It can not only effectively enrich OPPs, but can be separated by an external magnetic field, thereby simplifying the traditional steps of centrifugation and cleanup in sample preparation. The introduction of a temperature control system (TCS) can tackle the problem of the low ionization efficiency in MFGDP and expand its application range. Under optimized experimental conditions, the limits of detection (LODs) of the standard solution as low as 0.0068-0.7500 μg L^-1 mm^-2 were achieved, with relative standard deviations (RSDs) being less than 17.8%. Moreover, vegetable extracts were spiked to evaluate the accuracy of the method, and good recoveries (76.9-123.5%) were obtained. Remarkably, it took no more than 7 minutes from sample preparation to testing, resulting in significantly improved ability of the quantitative detection of plentiful samples.

Nanofluid of magnetic-activated charcoal and hydrophobic deep eutectic solvent: Application in dispersive magnetic solid-phase extraction for the determination and preconcentration of warfarin in biological samples by high-performance liquid chromatography

In this study, for the first time, nanofluid of magnetic-activated charcoal and hydrophobic deep eutectic solvent (AC@Fe₃ O₄ -DES) based dispersive magnetic solid-phase extraction was successfully applied for the determination and preconcentration of warfarin in plasma and urine samples. The hydrophobic DES was prepared by mixing tetramethylammonium chloride (as hydrogen bond acceptor) and thymol (as hydrogen bond donor) and acted simultaneously as both carrier and stabilizer for magnetic nanoparticles. In this method, the nanofluid as a new extraction solvent was rapidly injected into the aqueous sample, which led to improvement of the mass transfer of the analytes into the sorbent and reduction of the extraction time. In the screening step, the fractional factorial design was applied for selecting some important parameters which significantly affected the extraction procedure. The effective parameters were then optimized by Box-Behnken design. Under the optimal conditions, the limits of detection were in the range of 0.3-1.6 ng/ml. A good linear range was observed in the range of 1.0-500.0 ng/ml for water and 5.0-500.0 ng/ml for urine and plasma. The intra- and inter-day relative standard deviations were 2.7-3.2 and 1.9-4.5% for five replications, respectively. Based on the results, the proposed method was successfully applied for the determination of warfarin in biological samples, using high-performance liquid chromatography.

Development and perspectives of rapid detection technology in food and environment

Food safety become a hot issue currently with globalization of food trade and food supply chains. Chemical pollution, microbial contamination and adulteration in food have attracted more attention worldwide. Contamination with antibiotics, estrogens and heavy metals in water environment and soil environment have also turn into an enormous threat to food safety. Traditional small-scale, long-term detection technologies have been unable to meet the current needs. In the monitoring process, rapid, convenient, accurate analysis and detection technologies have become the future development trend. We critically synthesizing the current knowledge of various rapid detection technology, and briefly touched upon the problem which still exist in research process. The review showed that the application of novel materials promotes the development of rapid detection technology, high-throughput and portability would be popular study directions in the future. Of course, the ultimate aim of the research is how to industrialization these technologies and apply to the market.

Analytical methods to analyze pesticides and herbicides

This paper reviews studies published in 2019, in the area of analytical techniques for determination of pesticides and herbicides. It should be noted that some of the reports summarized in this review are not directly related to but could potentially be used for water environment studies. Based on different methods, the literatures are organized into six sections, namely extraction methods, electrochemical techniques, spectrophotometric techniques, chemiluminescence and fluorescence methods, chromatographic and mass spectrometric techniques, and biochemical assays. PRACTITIONER POINTS: Totally 141 research articles have been summarized. The review is divided into six parts. Chromatographic and mass spectrometric techniques are the most widely used methods.

Magnetic amino-functionalized hollow silica-titania microsphere as an efficient sorbent for extraction of pesticides in green and roasted coffee beans

This study describes the synthesis and application of a magnetic amino-functionalized hollow silica-titania microsphere as a new sorbent for magnetic dispersive micro-solid phase extraction of selected pesticides in coffee bean samples. The sorbent was fully characterized by Fourier-transform infrared spectroscopy, field emission scanning electron microscopy, transition electron microscopy, energy-dispersive X-ray spectroscopy, and vibrating sample magnetometry techniques. Significant extraction parameters affecting the proposed method, such as extraction time, sorbent amount, sample solution pH, salt amount, and desorption conditions (desorption solvent and time) were investigated and optimized. All the figures of merits were validated in coffee bean samples under the matrix-matched calibration method. Linear dynamic ranges were 5-250 µg/kg with the determination coefficients (R² ) > 0.9980. The limits of detection for the pesticides of chlorpyrifos, malathion, hexaconazole, and atrazine were 1.42, 1.43, 1.35, and 1.33 µg/kg, respectively. Finally, the method was successfully applied for the determination of the pesticides in green and roasted coffee bean samples, and the obtained recoveries were in the range of 74-113% for spiked samples. The prepared sorbent could be used for the magnetic dispersive micro-solid phase extraction of pesticides in the plant-derived food matrix.

Development of a new efficient and economical magnetic sorbent silicone surfactant-based activated carbon for the removal of chloro- and nitro-group phenolic compounds from contaminated water samples

In this study, activated carbon (AC) coated with a green silicone surfactant (SS) was further incorporated with magnetite particles (Fe₃O₄) via a co-precipitation method to enhance the separation of the newly designed magnetic AC–SS (Fe₃O₄@AC–SS) in a magnetic field. The properties of this magnetic adsorbent were characterized via Fourier transform-infrared spectroscopy (FT-IR), thermogravimetric analysis (TGA), X-ray diffraction (XRD), and transmission electron microscopy (TEM). The adsorption characteristics of the Fe₃O₄@AC–SS adsorbent were examined using 2,4-nitrophenol and 2,4-dichlorophenol as adsorbates. Experiments were performed to investigate the adsorption kinetics, isotherms, thermodynamics as well as the effects of adsorption dosage and solution pH on the removal of both analytes. The kinetic data were well-fitted by the pseudo-second order model and the Freundlich model best described the adsorption isotherm for both analytes. The maximum adsorption capabilities for 2,4-dinitrophenol and 2,4-dichlorophenol reached 43 and 98 mg g⁻¹, respectively. The analysis was further validated using real industrial effluent, and a removal efficiency of 62.2–98.1% and relative standard deviation value less than 7.2% were attained for both analytes. Thus, the multifunctional adsorbent has potential to function as an adsorbent for the fast, convenient, economical and highly efficient removal of pollutants from wastewater, which is significant for the purification of natural water and industrial effluent.

In this study, activated carbon (AC) coated with a green silicone surfactant (SS) was further incorporated with magnetite particles (Fe₃O₄) to enhance the separation of the newly designed magnetic AC–SS (Fe₃O₄@AC–SS) in a magnetic field.