A carbon-supported BiSn nanoparticles based novel sensor for sensitive electrochemical determination of Cd (II) ions

Emerging Trends in nanostructured materials-coated screen printed electrodes for the electrochemical detection of hazardous heavy metals in environmental matrices

Heavy metal ions (HMIs) have become a significant contaminant in recent years. The increase in heavy metal pollution is a serious situation, requiring progressively robust, fast sensing, highly sensitive, and suitable techniques for heavy metal detection. Compared to other classical analytical methods, electroanalytical techniques, especially stripping voltammetric techniques with modified screen-printed electrodes (SPEs), have several advantages, such as fast sensing, great sensitivity, specificity, and long-time stability. Therefore, these techniques are more suitable for HMI detection. In this review, the nanostructured materials used to coat SPEs for the electrochemical determination of HMI are summarized. Additionally, the electrode fabrication method, modification steps, and electroanalytical study of these materials are systematically discussed. Hence, this review will support the researchers in precisely evaluating the electrochemical HMIs detection through highly sensitive stripping voltammetric techniques using SPE modified with nanostructured carbon and their allotropes, metal, metal oxides and their nanocomposites as sensor materials. Moreover, modified electrodes real time detection of HMIs in different food and environmental samples were briefly discussed.

Recent advances in the modification of electrodes for trace metal analysis: a review

This review paper summarizes the research published in the last five years on using different compounds and/or materials as modifiers for electrodes employed in trace heavy metal analysis. The main groups of modifiers are identified, and their single or combined application on the surface of the electrodes is discussed. Nanomaterials, film-forming substances, and polymers are among the most used compounds employed mainly in the modification of glassy carbon, screen-printed, and carbon paste electrodes. Composites composed of several compounds and/or materials have also found growing interest in the development of modified electrodes. Environmentally friendly substances and natural products (mainly biopolymers and plant extracts) have continued to be included in the modification of electrodes for trace heavy metal analysis. The main analytical performance parameters of the modified electrodes as well as possible interferences affecting the determination of the target analytes, are discussed. Finally, a critical evaluation of the main findings from these studies and an outlook discussing possible improvements in this area of research are presented.

Emerging Frontiers in Nanotechnology for Precision Agriculture: Advancements, Hurdles and Prospects

This review article provides an extensive overview of the emerging frontiers of nanotechnology in precision agriculture, highlighting recent advancements, hurdles, and prospects. The benefits of nanotechnology in this field include the development of advanced nanomaterials for enhanced seed germination and micronutrient supply, along with the alleviation of biotic and abiotic stress. Further, nanotechnology-based fertilizers and pesticides can be delivered in lower dosages, which reduces environmental impacts and human health hazards. Another significant advantage lies in introducing cutting-edge nanodiagnostic systems and nanobiosensors that monitor soil quality parameters, plant diseases, and stress, all of which are critical for precision agriculture. Additionally, this technology has demonstrated potential in reducing agro-waste, synthesizing high-value products, and using methods and devices for tagging, monitoring, and tracking agroproducts. Alongside these developments, cloud computing and smartphone-based biosensors have emerged as crucial data collection and analysis tools. Finally, this review delves into the economic, legal, social, and risk implications of nanotechnology in agriculture, which must be thoroughly examined for the technology’s widespread adoption.

In Situ Synthesis of MnMgFe-LDH on Biochar for Electrochemical Detection and Removal of Cd2+ in Aqueous Solution

Herein, MnMgFe-layered double hydroxides/biochar (MnMgFe-LDHs/BC) composite was fabricated by immobilizing MnMgFe-LDHs on BC via the coprecipitation method, which was employed as an effective material for the detection and removal of Cd²⁺ from aqueous media. A lamellar structure of MnMgFe-LDHs with abundant surface-hydroxyl groups and various interlayer anions inside present a greater chance of trapping Cd²⁺. Meanwhile, the conductive BC with a porous structure provides numerous channels for the adsorption of Cd²⁺. Using the MnMgFe-LDHs/BC-based sensor, Cd²⁺ can be detected with a low limit of detection down to 0.03 ng/L. The feasibility of detecting Cd²⁺ in paddy water was also carried out, with satisfactory recoveries ranging from 97.3 to 102.3%. In addition, the MnMgFe-LDHs/BC material as an adsorbent was applied to remove Cd²⁺ from water with adsorption capacity of 118 mg/g, and the removal efficiency can reach 91%. These results suggest that the as-prepared MnMgFe-LDHs/BC can serve as a favorable platform for efficient determination and removal of Cd²⁺ in water.

Mesoporous carbon decorated with MIL-100(Fe) as an electrochemical platform for ultrasensitive determination of trace cadmium and lead ions in surface water

In this work, MIL-100(Fe)-decorated mesoporous carbon powders (MC@MIL-100(Fe)) were prepared by in situ growth of MIL-100(Fe) on the surface of ZIF-8 framework-based mesoporous carbons (MC). The hybrid material was characterized using SEM equipped with EDS mapping for morphology investigation, X-ray photoelectron spectroscopy for chemical valence analysis, and X-ray diffraction for crystal structure determination. The developed sensor separated from the traditional bismuth film decoration, and simultaneously, MC@MIL-100(Fe) was applied for the first time to electrochemically detect trace amounts of Pb(II) and Cd(II). The fabricated MC@MIL-100(Fe)-based electrochemical sensor showed excellent response to the target analytes at -0.55 and - 0.75 V for lead and cadmium ions, respectively. By adjusting some measurement parameters, that is, the loading concentration of MC@MIL-100(Fe), acidity of the HAc-NaAc buffer (ABS), deposition potential, and deposition time, the analytical performance of the proposed electrochemical sensor was examined by exploring the calibration curve, repeatability, reproducibility, stability, and anti-interference under optimized conditions. The response current of the proposed MC@MIL-100(Fe) electrochemical sensor showed a well-defined linear relationship in the concentration ranges of 2-250 and 2-270 μg·L^-1 for Cd(II) and Pb(II), respectively. In addition, the detection limits of the sensor for Cd(II) and Pb(II) were 0.18 and 0.15 μg L^-1, respectively, which are well below the World Health Organization (WHO) drinking water guideline value. The MC@MIL-100(Fe) can be potentially used as an electrochemical platform for monitoring heavy metals in surface water, with satisfactory results.

Application of BiNPs/MWCNTs-PDA/GC sensor to measurement of Tl (1) and Pb (II) using stripping voltammetry

Herein, simultaneous determination of Tl (1) and Pb (II) has been carried out at the surface of a modified glassy carbon electrode with polydopamine functionalized multi-walled carbon nanotubes- BiNPs nanocomposite (BiNPs/MWCNTs-PDA/GC) using square-wave anodic stripping voltammetry (SWASV) technique. The morphologies, composition and, electrochemical properties of the BiNPs/MWCNTs-PDA/GC were characterized by scanning electron microscopy (SEM), transition electron microscopy (TEM), X-ray energy dispersive spectroscopy (EDX), electrochemical impedance spectroscopy (EIS) and, SWASV. The parameters affecting the stripping current response were investigated and optimized. The large specific area of MWCNTs and good electro-conductibility of BiNPs causes the BiNPs/MWCNTs-PDA/GC electrode to exhibit an excellent electro-catalytic effect with good separation peaks for Tl and Pb oxidation compared to bare GCE under the optimal conditions. The proposed sensor showed wide leaner ranges from 0.4-100 ppb and 100-400 ppb for Tl (I) and Pb (II). Low detection limits of 0.04 ppb for Tl (I) and 0.07 ppb for Pb (II) were achieved. The efficiency of the electrode after thirty days of storage in ambient conditions without using it and also with the ability to reuse for 16 days did not decrease significantly. In addition, the modified electrode with simple preparation method showed good reproducibility, and high selectivity for measuring target ions. The method was successfully implemented for the simultaneous determination of Tl (I) and Pb (II) in tap, mineral and waste water samples with acceptable recovery (from 99.1-103.2 for Tl (I) and 98.4-100.4 for Pb (II)).

Self-Assembled Iron Oxide Nanoparticle-Modified APTES-ITO Electrode for Simultaneous Stripping Analysis of Cd(II) and Pb(II) Ions

Carboxyl (−COOH)-stabilized iron oxide nanoparticles (IONPs) synthesized through co-precipitation were used to modify an indium tin oxide (ITO) electrode, which was chemically functionalized with 3-aminopropyltriethoxysilane (APTES) for heavy metal detection. The effect of soaking time (30, 60, 90, and 120 min) of IONP-COOH self-assembled on an APTES-ITO electrode was studied. Cyclic voltammetry and scanning electron microscopy were applied to analyze the electrochemical properties and morphologies of IONP-COOH/APTES-ITO modified electrode. The modified electrodes were then employed for the simultaneous detection of Cd(II) and Pb(II) by using square wave anodic stripping voltammetry. At 90 min of soaking time, excellent electrochemical performance and larger effective surface area (A_e) were obtained. The linear range for the simultaneous detection of Cd(II) and Pb(II) ions using the modified electrode was 10–100 ppb with limits of detection of 0.90 and 0.60 ppb, respectively. The interference study revealed a low interference effect from Cr(III), Hg(II), Zn(II), Cu(II), Mg(II), Na(I), and K(I) toward the simultaneous detection of Cd(II) and Pb(II). Finally, the IONP-COOH/APTES-ITO-modified electrode was applied to analyze seawater samples and was able to simultaneously detect Cd(II) and Pb(II) ions.

Electrochemical detection of Cd(ii) ions in complex matrices with nanopipets

Heavy metal contamination and its detrimental health effects are a growing concern globally. Several metal mitigation systems and regulatory approaches have been implemented to minimize the negative impacts on human health. However, none of these function at maximum efficiency, mainly due to the lack of accurate information about metal speciation. Therefore, there is a critical need to develop novel, cheap, efficient, and robust metal detecting sensors. In this study, we describe the application of a nanopipet based electrochemical sensor to detect aqueous Cd(ii) ions. The inner radius of our nanopipets is ∼300 nm, and the fundamental mechanism behind our sensor's response is ion transfer between two immiscible electrolyte solutions (ITIES). The absence of redox behavior makes ITIES an excellent, attractive electrochemical tool to study various ions in aqueous solutions. In this study, we used 1,10-phenanthroline as our ionophore in the organic phase (dichloroethane) to facilitate the transfer of Cd(ii) ions from the polar aqueous phase to the less polar organic phase. Unlike previous studies, we characterized our nanopipet in complicated matrices, including, but not limited to, tris buffer and artificial seawater. We performed quantitative assessments to determine our sensor's limit of detection, stability, sensitivity, and selectivity. We further show that our nanosensor can detect free Cd(ii) ions in the presence of strong complexing agents such as ethylenediaminetetraacetic acid, 2,3-dimercaptosuccinic acid, etc. We quantified the concentration of free Cd(ii) ions in a water sample collected from a local lagoon. Thus, we showcased the power of our nanopipets to act as a robust, accurate, and efficient speciation sensor to detect Cd(ii) ions in environmental samples.

Nanocomposites for Electrochemical Sensors and Their Applications on the Detection of Trace Metals in Environmental Water Samples

The elevated concentrations of various trace metals beyond existing guideline recommendations in water bodies have promoted research on the development of various electrochemical nanosensors for the trace metals' early detection. Inspired by the exciting physical and chemical properties of nanomaterials, advanced functional nanocomposites with improved sensitivity, sensitivity and stability, amongst other performance parameters, have been synthesized, characterized, and applied on the detection of various trace metals in water matrices. Nanocomposites have been perceived as a solution to address a critical challenge of distinct nanomaterials that are limited by agglomerations, structure stacking leading to aggregations, low conductivity, and limited porous structure for electrolyte access, amongst others. In the past few years, much effort has been dedicated to the development of various nanocomposites such as; electrochemical nanosensors for the detection of trace metals in water matrices. Herein, the recent progress on the development of nanocomposites classified according to their structure as carbon nanocomposites, metallic nanocomposites, and metal oxide/hydroxide nanocomposites is summarized, alongside their application as electrochemical nanosensors for trace metals detection in water matrices. Some perspectives on the development of smart electrochemical nanosensors are also introduced.

Ultrafine Bi-Sn nanoparticles decorated on carbon aerogels for electrochemical simultaneous determination of dopamine (neurotransmitter) and clozapine (antipsychotic drug)

This present study describes the synthesis of ultrafine Bi-Sn nanoparticles decorated on carbon aerogels (Bi-Sn NP/CAG) as a nanocomposite for the electrochemical simultaneous determination of dopamine (DA) and clozapine (CLZ). The typical characterization techniques, such as XRD, Raman, BET, FT-IR, TGA, XPS, and FE-SEM/TEM, showed useful insights into the crystal phase and morphology of Bi-Sn NP/CAG. Integrated Bi-Sn NP/CAG built into a cost-effective screen printed carbon electrode (SPCE) offers a high electrochemical surface area (ECSA) compared to unmodified, Bi-Sn, and CAG/SPCEs, such that it favourably allowed the binding of DA and CLZ molecules onto the surface at the Bi-Sn/CAG, which was demonstrated by cyclic and differential pulse voltammetry techniques. As a result, the DA and CLZ sensing exhibited low detection limits (DL, 4.6 and 97.6 nM (S/N = 3)), and sensitivity (3.402 and 0.4 μA μM-1 cm-2) over a wide linear range (0.02-97.59 and 0.5-2092 μM), respectively. To go a step further, the Bi-Sn NP/CAG/SPCE was applied for the simultaneous determination of DA and CLZ which featured lower DL (23.1 and 31.3 nM (S/N = 3)), and sensitivity (0.4979 and 0.04 μA μM-1 cm-2) over a wide linear range (2-182 and 10-910 μM), respectively. The selectivity for DA and CLZ in the presence of a 10-fold concentration of their potentially interfering active species was demonstrated. Finally, this sensing methodology enables the rapid electrochemical determination of the amount of DA and CLZ in a rat brain region serum sample with successful recovery outcomes.

Fluorescence turn off-on probe (β-cyclodextrin-hydroxyquinoline) for monitoring of Cd2+ ions and tetracycline

In this paper, a photoluminescent turn off-on switch probe β-cyclodextrin-hydroxyquinoline (β-CD-HQ) was efficiently applied for detection and measurement of Cd²⁺ ions and detection of tetracycline. The proposed assay has shown an excellent selective fluorescence response toward Cd²⁺ ions over other ions like Al³⁺, Pb²⁺, Zn²⁺, Co²⁺, K⁺, Na⁺ and Sr²⁺. The fluorescence emission intensity of the probe is slightly affected by competing ions. In optimum pH value, 4, the limit of detection and linear concentration range were 0.05 nM and 0.1-1.5 nM, respectively. Additionally, the extraordinary output signal of β-CD-HQ was utilized to investigate the logic behavior of β-CD-HQ in the aqueous media. Accordingly, a solid support logic circuit was made by producing the fluorescence output signal under the stimulation of Cd²⁺ ions and tetracycline as inputs.

Sensors Applied for the Detection of Pesticides and Heavy Metals in Freshwaters

Water is essential for every life living on the planet. However, we are facing a more serious situation such as water pollution since the industrial revolution. Fortunately, many efforts have been done to alleviate/restore water quality in freshwaters. Numerous sensors have been developed to monitor the dynamic change of water quality for ecological, early warning, and protection reasons. In the present review, we briefly introduced the pollution status of two major pollutants, i.e., pesticides and heavy metals, in freshwaters worldwide. Then, we collected data on the sensors applied to detect the two categories of pollutants in freshwaters. Special focuses were given on the sensitivity of sensors indicated by the limit of detection (LOD), sensor types, and applied waterbodies. Our results showed that most of the sensors can be applied for stream and river water. The average LOD was72.53±12.69 ng/ml (n=180) for all pesticides, which is significantly higher than that for heavy metals (65.36±47.51 ng/ml,n=117). However, the LODs of a considerable part of pesticides and heavy metal sensors were higher than the criterion maximum concentration for aquatic life or the maximum contaminant limit concentration for drinking water. For pesticide sensors, the average LODs did not differ among insecticides (63.83±17.42 ng/ml,n=87), herbicides (98.06±23.39 ng/ml,n=71), and fungicides (24.60±14.41 ng/ml,n=22). The LODs that differed among sensor types with biosensors had the highest sensitivity, while electrochemical optical and biooptical sensors showed the lowest sensitivity. The sensitivity of heavy metal sensors varied among heavy metals and sensor types. Most of the sensors were targeted on lead, cadmium, mercury, and copper using electrochemical methods. These results imply that future development of pesticides and heavy metal sensors should (1) enhance the sensitivity to meet the requirements for the protection of aquatic ecosystems and human health and (2) cover more diverse pesticides and heavy metals especially those toxic pollutants that are widely used and frequently been detected in freshwaters (e.g., glyphosate, fungicides, zinc, chromium, and arsenic).

Thiolated poly(aspartic acid)-functionalized two-dimensional MoS2, chitosan and bismuth film as a sensor platform for cadmium ion detection

In this work, a sensitive electrochemical platform for determination of cadmium ions (Cd²⁺) is obtained using thiolated poly(aspartic acid) (TPA)-functionalized MoS₂ as a sensor platform by differential pulse anodic stripping voltammetry (DPASV). The performance of the TPA–MoS₂-modified sensor is systemically studied. It demonstrates that the TPA–MoS₂ nanocomposite modified sensor exhibits superior analytical performance for Cd²⁺ over a linear range from 0.5 μg L⁻¹ to 50 μg L⁻¹, with a detection limit of 0.17 μg L⁻¹. Chitosan is able to form a continuous coating film on the surface of the GC electrode. The good sensing performance of the TPA–MoS₂-modified sensor may be attributed to the following factors: the large surface area of MoS₂ (603 m² g⁻¹), and the abundant thiol groups of TPA. Thus, the TPA–MoS₂-modified sensor proves to be a reliable and environmentally friendly tool for the effective monitoring of Cd²⁺ existing in aquacultural environments.

In this work, a sensitive electrochemical platform for determination of cadmium ions (Cd²⁺) is obtained using thiolated poly(aspartic acid) (TPA)-functionalized MoS₂ as a sensor platform by differential pulse anodic stripping voltammetry (DPASV).