A novel polydopamine electrochemiluminescence organic nanoparticle-based biosensor for parathyroid hormone detection

Aptamer-Antibody Birecognized Sandwich SERRS Biosensor in Accurate and Rapid Identification of Intraoperative Parathyroid Hormone

With the increasing incidence of thyroid cancer worldwide and the increasing demand for surgery, the risk of parathyroid injury is also increasing, which will lead to postoperative hypoparathyroidism (HP) and hypocalcemia. In order to improve the quality of life of patients after surgery, there is an urgent need to develop a novel platform that can identify the parathyroid gland immediately during surgery. The parathyroid gland promotes the increase of blood calcium concentration by secreting parathyroid hormone (PTH). Therefore, in this study, we used the sensitive surface-enhanced Raman spectroscopy (SERS) technique for rapid detection of PTH, while the near-infrared dye IR808 was used for resonance with the incident excitation wavelength of 785 nm to achieve the surface enhanced resonance Raman spectroscopy (SERRS) effect and provide a higher signal. The signal is enhanced by up to 200-fold compared to nonresonant sulfhydryl molecules. In addition, we used an aptamer-antibody mode with low Gibbs free energy (ΔG) and low dissociation constant (Kd), using the sandwich method, to achieve specific recognition of PTH. By optimizing the incubation temperature, aptamer dosage, particle concentration, and other key factors, the optimal detection conditions of the system were obtained. The sensitivity of PTH detection was as high as 9.75 pg/mL at a 5 min incubation time. In this work, we achieved an extension from standard products to rats to clinically practical samples. Finally, the eluate samples obtained from the actual clinical operations were compared with the lateral flow biosensor (LFB), chemiluminescence microparticle immunoassay (CMIA), and SERRS, respectively. Finally, using the CMIA results as the reference standard, the SERRS assay achieved a sensitivity of 94% and a specificity of 100%. This study provides new ideas and methods for the refined development of thyroid cancer surgery, improving postoperative safety and quality of life of patients, and promoting the new mode of intraoperative diagnosis and treatment.

Timescale correlation of shallow trap states increases electrochemiluminescence efficiency in carbon nitrides

Highly efficient interconversion of different types of energy plays a crucial role in both science and technology. Among them, electrochemiluminescence, an emission of light excited by electrochemical reactions, has drawn attention as a powerful tool for bioassays. Nonetheless, the large differences in timescale among diverse charge-transfer pathways from picoseconds to seconds significantly limit the electrochemiluminescence efficiency and hamper their broad applications. Here, we report a timescale coordination strategy to improve the electrochemiluminescence efficiency of carbon nitrides by engineering shallow electron trap states via Au-N bond functionalization. Quantitative electrochemiluminescence kinetics measurements and theoretic calculations jointly disclose that Au-N bonds endow shallow electron trap states, which coordinate the timescale of the fast electron transfer in the bulk emitter and the slow redox reaction of co-reagent at diffusion layers. The shallow electron trap states ultimately accelerate the rate and kinetics of emissive electron-hole recombination, setting a new cathodic electrochemiluminescence efficiency record of carbon nitrides, and empowering a visual electrochemiluminescence sensor for nitrite ion, a typical environmental contaminant, with superior detection range and limit.

Advances in the Use of Conducting Polymers for Healthcare Monitoring

Conducting polymers (CPs) are an innovative class of materials recognized for their high flexibility and biocompatibility, making them an ideal choice for health monitoring applications that require flexibility. They are active in their design. Advances in fabrication technology allow the incorporation of CPs at various levels, by combining diverse CPs monomers with metal particles, 2D materials, carbon nanomaterials, and copolymers through the process of polymerization and mixing. This method produces materials with unique physicochemical properties and is highly customizable. In particular, the development of CPs with expanded surface area and high conductivity has significantly improved the performance of the sensors, providing high sensitivity and flexibility and expanding the range of available options. However, due to the morphological diversity of new materials and thus the variety of characteristics that can be synthesized by combining CPs and other types of functionalities, choosing the right combination for a sensor application is difficult but becomes important. This review focuses on classifying the role of CP and highlights recent advances in sensor design, especially in the field of healthcare monitoring. It also synthesizes the sensing mechanisms and evaluates the performance of CPs on electrochemical surfaces and in the sensor design. Furthermore, the applications that can be revolutionized by CPs will be discussed in detail.

Paper-based bipolar electrode electrochemiluminescence sensors for point-of-care testing

In the past few years, point-of-care testing (POCT) technology has crossed the boundaries of laboratory determination and entered the stage of practical applications. Herein, the latest advances and principal issues in the design and fabrication of paper-based bipolar electrode electrochemiluminescence (BPE-ECL) sensors, which are widely used in the POCT field, are highlighted. After introducing the attractive physical and chemical properties of cellulose paper, various approaches aimed at enhancing the functions of the paper, and their underlying principles are described. The materials typically employed for fabricating paper-based BPE are also discussed in detail. Subsequently, the universal method of enhancing BPE-ECL signal and improving detection accuracy is put forward, and the ECL detector widely used is introduced. Furthermore, the application of paper-based BPE-ECL sensors in biomedical, food, environmental and other fields are displayed. Finally, future opportunities and the remaining challenges are analyzed. It is expected that more design concepts and working principles for paper-based BPE-ECL sensors will be developed in the near future, paving the way for the development and application of paper-based BPE-ECL sensors in the POCT field and providing certain guarantee for the development of human health.

Optically Active Nanomaterials and Its Biosensing Applications-A Review

This article discusses optically active nanomaterials and their optical biosensing applications. In addition to enhancing their sensitivity, these nanomaterials also increase their biocompatibility. For this reason, nanomaterials, particularly those based on their chemical compositions, such as carbon-based nanomaterials, inorganic-based nanomaterials, organic-based nanomaterials, and composite-based nanomaterials for biosensing applications are investigated thoroughly. These nanomaterials are used extensively in the field of fiber optic biosensing to improve response time, detection limit, and nature of specificity. Consequently, this article describes contemporary and application-based research that will be of great use to researchers in the nanomaterial-based optical sensing field. The difficulties encountered during the synthesis, characterization, and application of nanomaterials are also enumerated, and their future prospects are outlined for the reader's benefit.

Enhancing cycle life and usable energy density of fast charging LiFePO4-graphite cell by regulating electrodes' lithium level

Range anxiety is a primary concern among present-day electric vehicle (EV) owners, which could be curtailed by maximizing the driving range per charge or reducing the charging time of the lithium-ion battery (LIB) pack. Maximizing the driving range is a multifaceted task as charging-discharging the LIB up to 100% of its nominal capacity is limited by the cell chemistry (voltage window) and cell operating conditions. Our studies on commercial LiFePO4/graphite cells show that a cycle life of 4320 is achieved at 4C rate with 80% SOC-100% DOD combination (12 min charging time), which is the highest among the works reported with this cell chemistry. Complete utilization of electrodes' lithium during cycling resulted in the lowest cycle life of 956. This study demonstrates LIB charging-discharging protocol enabling longer driving range with quicker charging times. Besides, it might endow promising possibilities of future EV LIB packs with reduced size/weight and high safety.

A Visual FRET Immunofluorescent Biosensor for Ratiometric Parathyroid Hormone (1-84) Antigen Point-of-Care Detection

Excessive secretion of PTH leads to disturbance of calcium and phosphorus metabolism in the body, which promotes bone, kidney, digestive system and nervous system diseases. Due to the short half-life of PTH, it becomes a difficult issue for PTH detection in the clinical diagnosis field. We explored a competitive immunofluorescent sensing mode based on FRET of two-color CdTe QDs for ratiometric PTH 1-84 antigen detection. The FRET effect and ratiometric fluorescence between the two-color CdTe QDs motivated accurate quantification of PTH 1-84 antigen concentration from 0.01 ng mL^-1 to 0.08 ng mL^-1 with a limit of detection of 3 pg mL^-1. More importantly, under UV irradiation, samples with different concentrations of PTH 1-84 antigen achieved fluorescence visualization, which provides huge possibility for the practical application of PTH 1-84 antigen point-of-care detection.

Enhanced biosensing strategies using electrogenerated chemiluminescence: recent progress and future prospects

An overview of enhancement strategies for highly sensitive ECL-based sensing of bioanalytes enabling early detection of cancer.

Screen printed bipolar electrode for sensitive electrochemiluminescence detection of aflatoxin B1 in agricultural products

In order to avoid the occurrence of false positives and false negatives caused by improper pretreatment during the detection of aflatoxin B1 by enzyme linked immunosorbent assay (ELISA). In this paper, we developed a screen printed bipolar electrode (BPE) for sensitive electrochemiluminescence (ECL) detection of aflatoxin B1 in agricultural products. The sensor uses a cathode of closed BPE as a functional sensing interface and an anode as a signal collection interface. In this way, the analyte does not need to participate in the ECL reaction of the anode. It avoids direct contact of photoactive molecules with complex reaction systems and greatly broadens the range of applications for ECL. After mixing the test sample with a known fixed concentration of horseradish peroxidase-labeled AFB1 (HRP-AFB1), they compete for binding to monoclonal antibodies. HRP catalyzes the polymerization of aniline to form polyaniline (PANI). Thereby causing a change in the oxidation-reduction potential and the ECL intensity in the electrochemical system, and then achieve the purpose of detecting the AFB1 concentration in the sample. As a result, the sensor has a good analytical performance for AFB1 with a linear range of 0.1-100 ng mL^-1 and a detection limit of 0.033 ng mL^-1. The sensor avoids the direct contact between the reaction system and the signal measurement system. In recovery experiment for six grains, the results demonstrate that the recovery rate and accuracy of this sensor is better than that of ELISA. This method provides a new idea for the detection of other mycotoxins in grains.