One-step membrane protected micro-solid-phase extraction and derivatization coupling to high-performance liquid chromatography for selective determination of aliphatic aldehydes in cosmetics and food

Covalent organic framework reinforced hollow fiber bar for extraction and detection of bisphenols from beverages

Bisphenols (BPs) can migrate from packaging materials into foods, resulting in potentially harmful residues. For example, accumulation of BPs is associated with endocrine disorders. Owing to matrix effects, development of an effective and eco-friendly sample pretreatment would be helpful for BPs detection in beverages packed in plastic containers. In this work, an extraction bar, composed of hollow fiber (HF) functionalized with covalent organic frameworks (COF@Tp-NDA) and 1-ocanol, was prepared for extraction of five BPs simultaneously. The synergistic effect of COF@Tp-NDA and 1-octanol improved the extraction efficiency of BPs from milk-based beverage, juice, and tea beverage. Under optimal conditions, limits of detection ranged from 0.10 to 2.00 ng mL-1 (R2 ≥ 0.9974) and recoveries ranged from 70.1 % to 106.8 %. This method has the potential to enrich BPs, supporting their accurate determination in complex beverages.

Development of a new continuous homogenous liquid phase microextraction procedure based on in-situ preparation of deep eutectic solvent; application in the analysis of aliphatic amines in urine samples by GC-MS

In the present work, a new microextraction procedure combined with gas chromatography-mass spectrometry has been developed for the analysis of several aliphatic amines from urine sample. The sample preparation method was a continuous homogenous liquid phase microextraction that was based on in-situ preparation of 4-chlorophenol: choline chloride deep eutectic solvent. The deep eutectic solvent was prepared by passing the mixture of related compounds through a syringe barrel filled with exothermic salts (calcium chloride and potassium bromide). The released heat by dissolving the salts and increasing the solution ionic strength assists the formation of the deep eutectic solvent. The influence of various factors on the efficiency of the proposed procedure including salts amount, flow rate, pH, salting-out effect, and extraction solvent volume was studied. The calibration curves were linear broadly over the concentration range of 1.2-250 ng mL-1 with coefficient of determinations ≥0.996. The enrichment factors were in the range of 188-246 and the limits of detection and quantification were 0.16-0.37 and 0.56-1.2 ng mL-1, respectively. Based on the results, the offered method was sensitive, rapid, eco-friendly, and efficient for extracting and determining aliphatic amines in urine samples.

Detection of aliphatic aldehydes by a pillar[5]arene-based fluorescent supramolecular polymer with vaporchromic behavior

The detection of volatile aliphatic aldehydes is of significance because of their chemical toxicity, physical volatility and widespread applications in chemical industrial processes. In this work, the direct detection of aliphatic aldehydes is tackled using a fluorescent supramolecular polymer with vaporchromic behavior which is contructed by pillar[5]arene-based host-guest intereactions. Thin films with strong orange-yellow fluorescence are prepared by coating the linear supramolecular polymer on glass sheets. When the thin films are exposed to aliphatic aldehydes with different carbon chain lengths, they can selectivly sensing  n -butyraldehyde ( C 4 ) and caprylicaldehyde ( C 8 ), accompanied by fluorescence quenching, indicating that the supramolecular polymer is a highly selective vapochromic response material for aliphatic aldehydes with long alkyl chains.

Trends in Innovations and Recent Advances in Membrane Protected Extraction Techniques for Organics in Complex Samples

Membrane protected extraction is an ongoing innovation for isolation and pre-concentration of analytes from complex samples. The extraction process, clean-up and pre-concentration of analytes occur in a single step. The inclusion of solid sorbents such as molecularly imprinted polymers (MIPs) after membrane extraction ensures that selective double extraction occurs in a single step. The first step involves selective extraction using the membrane and diffused analytes are trapped on the solid sorbent enclosed in the membrane. No further clean-up is required even for very dirty samples like plant extracts and wastewaters samples. Sample clean-up occurs during extraction in the first process and not as additional step since matrix components are prevented from trapping on the sorbent. This can be referred to as prevention is better than cure approach. In this work, the analytical methods that employed membrane protected extraction for various organics such as pesticides, polycyclic aromatic hydrocarbons, and pharmaceuticals are reviewed. The designs of these analytical methods, their applications, advantages and drawbacks are discussed in this review. Literature suggests that the introduction of solid sorbents in membrane creates the much-needed synergy in selectivity. Previous reviews focused on membrane combinations with MIPs while discussing micro-solid-phase extraction. The scope of this review was broadened to include other sample preparation aspects such as membrane protected stir bar solvent extraction and membrane protected solid-phase microextraction. In addition, novel sample preparation methods for solid samples which include Soxhlet membrane protected molecular imprinted solid phase extraction and membrane protected ultra sound assisted extracted are discussed.

Aptamer/derivatization-based surface-enhanced Raman scattering membrane assembly for selective analysis of melamine and formaldehyde in migration of melamine kitchenware

The analysis of contaminants in migration of food contact material (FCMs) is an urgent demand for food safety. In this study, melamine and formaldehyde in melamine kitchenware were selectively analyzed by surface-enhanced Raman scattering (SERS) via aptamer/derivatization-based membrane assembly. The membrane assembly was designed by simple filtration of Ag nanoparticles-decorated "stellate" silicon dioxide (SiO₂/Ag) and composites of reduced graphene oxide and Ag nanoparticles (rGO/Ag) functioned with specific reagents. High selectivity can be realized by melamine aptamer and derivatization reagent of formaldehyde, respectively. The relative standard deviations (RSDs) of melamine and formaldehyde analysis for 11 replicate measurements, 14 consecutive days and 25 batches are less than 6.0 %, which shows excellent repeatability and reproducibility. After the method was validated, the limits of detection (LOD) for melamine and formaldehyde are 0.15 mg/L and 0.21 mg/L, respectively. The developed method was applied to determine the content of melamine and formaldehyde in migration of melamine kitchenware with low relative errors (less than 5.3 %) compared to chromatographic results. The recoveries of melamine and formaldehyde for migrations of melamine kitchenware are 91.2-110.0 % and 94.0-106.0 % with RSDs in range of 1.8-8.3 % and 4.7-9.1 %, respectively. The method proposed a new concept of convenient, portable and reliable strategy for analysis of melamine and formaldehyde in migration from FCMs.

Biocatalytic Production of Aldehydes: Exploring the Potential of Lathyrus cicera Amine Oxidase

Aldehydes are a class of carbonyl compounds widely used as intermediates in the pharmaceutical, cosmetic and food industries. To date, there are few fully enzymatic methods for synthesizing these highly reactive chemicals. In the present work, we explore the biocatalytic potential of an amino oxidase extracted from the etiolated shoots of Lathyrus cicera for the synthesis of value-added aldehydes, starting from the corresponding primary amines. In this frame, we have developed a completely chromatography-free purification protocol based on crossflow ultrafiltration, which makes the production of this enzyme easily scalable. Furthermore, we determined the kinetic parameters of the amine oxidase toward 20 differently substituted aliphatic and aromatic primary amines, and we developed a biocatalytic process for their conversion into the corresponding aldehydes. The reaction occurs in aqueous media at neutral pH in the presence of catalase, which removes the hydrogen peroxide produced during the reaction itself, contributing to the recycling of oxygen. A high conversion (>95%) was achieved within 3 h for all the tested compounds.

Trace carbonyl analysis in water samples by integrating magnetic molecular imprinting and capillary electrophoresis

In order to obtain high derivatization efficiency, the overuse of derivative agent 2,4-dinitrophenylhydrazine (2,4-DNPH) is necessary for carbonyl detection. But, the 2,4-DNPH residue will cause background interferences and limit the pre-concentration factor of the target analytes. In order to overcome the bottleneck problems, the magnetic molecularly imprinted polymer based solid-phase extraction (MMIPs-SPE) method was developed with 2,4-dinitroaniline (2,4-DNAN) as the dummy template. The characteristics and selectivity of the MMIPs were investigated. Under the optimized conditions, the enrichment of carbonyls-DNPH derivatives with simultaneous removal of the surplus 2,4-DNPH was achieved. By coupling with capillary electrophoresis (CE), a satisfactory analytical performance was obtained with the detection limit ranging from 1.2 to 8.7 μg L⁻¹ for 8 carbonyls. The MMIPs-SPE-CE method was applied successfully for the carbonyl assessment in stream water, tap water and bottled water. In addition, the migration of carbonyls in bottled drinking water was investigated under UV irradiation and heating.

By integrating MMIPs-SPE method and CE, the enrichment of carbonyls-DNPH derivatives with simultaneous removal of the surplus derivative agent 2,4-DNPH can be achieved.

12-Plex UHPLC-MS/MS analysis of sarcosine in human urine using integrated principle of multiplex tags chemical isotope labeling and selective imprint enriching

Urinary sarcosine was considered to be a potential biomarker for prostate cancer (Pca). In this work, an integrated strategy of multiplex tags chemical isotope labeling (MTCIL) combined with magnetic dispersive solid phase extraction (MDSPE), was proposed for specific extraction and high-throughput determination of sarcosine by ultra high performance liquid chromatography tandem mass spectrometry (UHPLC-MS/MS). In the past three months, we have developed 8-plex MTCIL reagents with excellent qualitative and quantitative performance. In this work, the multiplexing capacity of MTCIL reagents (MTCIL360/361/362/363/364/365/366/375/376/378/379/381) was increased 1.5-fold from 8-plex to 12-plex. MTCIL359 was prepared and used to label sarcosine standard as internal standard (IS). The structural analogue derivative (MTCIL373-sarcosine) of all targeted MTCIL-sarcosine derivatives was synthesized and used as a novel dummy template to prepare dummy magnetic molecularly imprinted polymers (DMMIPs). The integration of MTCIL and DMMIPs procedures were extremely favorable to excellent chromatographic separation and efficient mass spectrometric detection. The labeling efficiency, chromatographic retention and mass spectrometry responses of MTCIL reagents were consistent for sarcosine. In a single UHPLC-MS/MS run (2.0 min), this method can simultaneously quantify sarcosine in 12-plex urine samples and achieve unbiased concentrations comparison between different urine samples. Analytical parameters including linearity (R² 0.989-0.997), detection limits (0.02 nM), precision (2.6-11.5%), accuracy (96.1-107.4%), matrix effect, labeling and extraction efficiency were carefully validated. The proposed method was successfully applied for urinary sarcosine determination of healthy male individuals and Pca patients. It was found that the sarcosine concentrations in these two groups were statistically extremely significantly different (P < 0.001). The developed method was a powerful analytical tool to substantially promote the analysis throughput and large-scale experiments about the potential biomarker research.

Derivatization procedures and their analytical performances for HPLC determination in bioanalysis

Derivatization, or chemical structure modification, is often used in bioanalysis performed by liquid chromatography technique in order to enhance detectability or to improve the chromatographic performance for the target analytes. The derivatization process is discussed according to the analytical procedure used to achieve the reaction between the reagent and the target compounds (containing hydroxyl, thiol, amino, carbonyl and carboxyl as the main functional groups involved in derivatization). Important procedures for derivatization used in bioanalysis are in situ or based on extraction processes (liquid-liquid, solid-phase and related techniques) applied to the biomatrix. In the review, chiral, isotope-labeling, hydrophobicity-tailored and post-column derivatizations are also included, based on representative publications in the literature during the last two decades. Examples of derivatization reagents and brief reaction conditions are included, together with some bioanalytical applications and performances (chromatographic conditions, detection limit, stability and sample biomatrix).

Membrane-Protected Molecularly Imprinted Polymer for the Microextraction of Indole-3-butyric Acid in Mung Bean Sprouts

Based on the hollow fiber protected molecularly imprinted polymer, a micro-solid-phase extraction (μ-SPE) method was developed and applied for the analysis of indole-3-butyric acid in mung bean sprouts by high-performance liquid chromatography. The extraction conditions of the μ-SPE method were optimized using L⁹(3⁴) orthogonal, and optimum conditions were found as follows: pH of sample solution was 2.0, chloroform was the organic solvent for embedding the μ-SPE bars, and acetonitrile was the desorption solvent. In addition, the extraction time was 80 min, desorption time was 5 min, stirring speed was 800 rpm, and concentration of NaCl was 10%. Under the optimum conditions, a standard curve was established for IBA, with a correlation coefficient of 0.9999. After extraction with phosphate buffer solution (pH = 9.0), successful pretreatment of mung bean sprouts was achieved by the μ-SPE method. The limit of detection was 0.075 mg/kg, and the recoveries were found to be in the range of 88.9-106.4%. This method is simple, environmentally friendly, and can be used for the determination of indole auxin contents in green bean sprouts quickly and accurately.