Dual sensing reporter system of assembled gold nanoparticles toward the sequential colorimetric detection of adenosine and Cr(III)

Gold nanoparticles as colorimetric probes in food analysis: Progress and challenges

The rapid, sensitive and reliable food safety control is urgently needed due to the harmful effects of the food contaminants on human health. Colorimetric approach has exhibited promising potential for the detection of food contaminants due to their easy preparation, rapid detection, high sensitivity, and naked-eye sensing. In recent years, AuNPs-based colorimetric probes have been extensively explored for food analysis. The present article reviews the development of AuNPs-based colorimetric probes for colorimetric sensing and their applications in food analysis. It generally summarizes the properties of AuNPs and introduces the preparation and functionalization methods of AuNPs. An overview of the colorimetric sensing mechanisms of AuNPs-based probes and their applications in analysis of food contaminants are also provided. Although AuNPs-based colorimetric probes show many advantages in detection of food contaminants, challenges remain in terms of complexity of food matrices, multiple analytes detection in a single go, and testing conditions interference.

Advances in colorimetric aptasensors for heavy metal ion detection utilizing nanomaterials: a comprehensive review

Heavy metal ion contamination poses significant environmental and health risks, necessitating rapid and efficient detection methods. In the last decade, colorimetric aptasensors have emerged as powerful tools for heavy metal ion detection, owing to their notable attributes such as high specificity, facile synthesis, adaptability to modifications, long-term stability, and heightened sensitivity. This comprehensive overview summarizes the key developments in this field over the past ten years. It discusses the principles, design strategies, and innovative techniques employed in colorimetric aptasensors using nanomaterials. Recent advancements in enhancing sensitivity, selectivity, and on-site applicability are highlighted. The review also presents application studies of successful heavy metal ion detection using colorimetric aptasensors, underlining their potential for environmental monitoring and health protection. Finally, future directions and challenges in the continued evolution of these aptasensors are outlined.

Aptamer-based NanoBioSensors for seafood safety

Chemical and biological contaminants are of primary concern in ensuring seafood safety. Rapid detection of such contaminants is needed to keep us safe from being affected. For over three decades, immunoassay (IA) technology has been used for the detection of contaminants in seafood products. However, limitations inherent to antibody generation against small molecular targets that cannot elicit an immune response, along with the instability of antibodies under ambient conditions greatly limit their wider application for developing robust detection and monitoring tools, particularly for non-biomedical applications. As an alternative, aptamer-based biosensors (aptasensors) have emerged as a powerful yet robust analytical tool for the detection of a wide range of analytes. Due to the high specificity of aptamers in recognising targets ranging from small molecules to large proteins and even whole cells, these have been suggested to be viable molecular recognition elements (MREs) in the development of new diagnostic and biosensing tools for detecting a wide range of contaminants including heavy metals, antibiotics, pesticides, pathogens and biotoxins. In this review, we discuss the recent progress made in the field of aptasensors for detection of contaminants in seafood products with a view of effectively managing their potential human health hazards. A critical outlook is also provided to facilitate translation of aptasensors from academic laboratories to the mainstream seafood industry and consumer applications.

Copper ferrite nanoparticles loaded on reduced graphene oxide nanozymes for the ultrasensitive colorimetric assay of chromium ions

Nowadays, due to the increasing threat of heavy metal ion pollution faced by the environment and living systems, the development of rapid and highly selective methods for the detection of chromium ions (Cr³⁺) has aroused increasing interest. In this study, copper ferrite nanoparticles (CuFe₂O₄) immobilized on reduced graphene oxide (CuFe₂O₄/rGO) were successfully fabricated by a simple co-precipitation method. The catalyst exhibits high peroxidase-like activity with 3,3',5,5'-tetramethylbenzidine (TMB) as a chromogenic matrix due to its large specific surface area, adsorption performance and abundant catalytic active sites. Based on the excellent peroxidase-like activity of CuFe₂O₄/rGO and its Cr³⁺-mediated inhibition controllability, a novel colorimetric assay for the heavy metal Cr³⁺ was created for the first time. Under optimal experimental conditions, CuFe₂O₄/rGO can be used as a peroxidase-like nanozyme to achieve the excellent detection of Cr³⁺ in the range of 0.1-25 μM, and the detection limit is 35 nM. The peroxidase-like CuFe₂O₄/rGO can provide a general catalytic platform for the application of biomimetic enzymatic catalytic systems and colorimetry, and a new approach has been established for the specific determination of the heavy metal Cr³⁺.

Facile synthesis of gold-silver/copper sulfide nanoparticles for the selective/sensitive detection of chromium, photochemical and bactericidal application

In this project, bimetallic Au-Agnanoparticles/CuS nanoparticles were prepared via simple hydrothermal methods, which were used as highly efficient material for Cr (III) detection, photocatalytic, and biological process. The Au-Ag/CuS nanoparticles was studied via UV-visible spectroscopy, field-emission scanning electron microscopy, Dynamic light scattering, and X-ray diffraction. The zeta potential and effective size of Au-Ag/CuS nanoparticles was -32.1 mV and 25 nm respectively. The response time of Cr (III) ions interaction was 2 min. The lowest detection of Cr (III) by Au-Ag/CuS nanoparticles was 0.5 nM. The Au-Ag/CuS nano catalyst was applied to decomposition of drug under visible lamp irradiation. The photo degradation response of drug was 100.0% in 30 min irradiation. The particles exhibited excellent antibacterial activities.

Recent advances in functionalization of plasmonic nanostructures for optical sensing

This review summarizes the progress that has been made in the use of nanostructured SPR-based chemical sensors and biosensors. Following an introduction into the field, a first large section covers principles of nanomaterial-based SPR sensing, mainly on methods using noble metal nanoparticles (spheres, cubes, triangular plates, etc.). The next section covers methods for functionalization of plasmonic nanostructures, with subsections on functionalization using (a) amino acids and proteins; (b) oligonucleotides, (c) organic polymers, and (d) organic compounds. Several tables are presented that give an overview on the wealth of methods and materials published. A concluding section summarizes the current status, addresses current challenges, and gives an outlook on potential future trends. This review is not intended to be a comprehensive compilation of the literature in the field but rather is a systematic overview of the state of the art in surface chemistry of plasmonic nanostructures. The ability of various ligands and receptors for functionalization of nanoparticles as well as their sensing capability is discussed.

Metallic-Nanoparticle-Based Sensing: Utilization of Mixed-Ligand Monolayers

The last two decades have seen great advancements in fundamental understanding and applications of metallic nanoparticles stabilized by mixed-ligand monolayers. Identifying and controlling the organization of multiple ligands in the nanoparticle monolayer has been studied, and its effect on particle properties has been examined. Mixed-ligand protected particles have shown advantages over monoligand protected particles in fields such as catalysis, self-assembly, imaging, and drug delivery. In this Review, the use of mixed-ligand monolayer protected nanoparticles for sensing applications will be examined. This is the first time this subject is examined as a whole. Mixed-ligand nanoparticle-based sensors are revealed to be divided into four groups, each of which will be discussed. The first group consists of ligands that work cooperatively to improve the sensors' properties. In the second group, multiple ligands are utilized for sensing multiple analytes. The third group combines ligands used for analyte recognition and signal production. In the final group, a sensitive, but unstable, functional ligand is combined with a stabilizing ligand. The Review will conclude by discussing future challenges and potential research directions for this promising subject.

Sequential colorimetric sensing of cupric and mercuric ions by regulating the etching process of triangular gold nanoplates

A triangular gold nanoplate (AuNPL)-based colorimetric assay is presented for ultrasensitive determination of cupric ions (Cu²⁺⁾ and mercuric ions (Hg²⁺) in sequence. AuNPLs were found to be etched efficiently when producing triiodide ions (I₃^-) by a redox reaction between Cu²⁺ and iodide ions (I^-), leading to a change of the shape of AuNPLs from triangular to sphere along with a color change from blue to pink. In the presence of Hg²⁺ the etching of AuNPLs was suppressed due to the consumption of I^- by the formation of HgI₂. With an increase of the concentration of the Hg²⁺ a transformation from sphere to triangular in the shape of AuNPLs occurred with a color change from pink to blue. The evolution of AuNPLs from etching to anti-etching state by sequential addition of Cu²⁺ and Hg²⁺ was accompanied with color variations and band shifts of localized surface plasmon resonance (LSPR), allowing for visual and spectroscopic determination of Cu²⁺ and Hg²⁺ successively within 15 min. In the range 0.01-1.5 μM for Cu²⁺ and 0.02-3.0 μM for Hg²⁺, the linear relationship between the band shift values and the target ions concentration was found good (R² > 0.996). The limit of detections (3S/k) was 19 nM for Cu²⁺ and 9 nM for Hg²⁺, respectively. The lowest visual estimation concentration was 80 nM for both Cu²⁺ and Hg²⁺ through the distinguishable color changes. This system exhibited desirable selectivity for Cu²⁺ and Hg²⁺ over other common ions tested. The method has been successfully applied to sequential determination of Cu²⁺ and Hg²⁺ in real water and food samples. Graphical abstract Scheme 1 Schematic illustration for sequential detection of Cu²⁺ and Hg²⁺ based on etching of AuNPLs.