Hydrophilic spacer-arm containing magnetic nanoparticles for immobilization of proteinase K: Employment for speciation of proteins for mass spectrometry-based analysis

Effects of Cross-linker Chemistry on Bioelectrocatalytic Reactions in a Redox Cross-linked Network of Glucose Dehydrogenase and Thionine

Enzyme-mediator bioconjugation is emerging as a building block for designing electrode platforms for the construction of biosensors and biofuel cells. Here, we report a one-pot bioconjugation technique for flavin adenine dinucleotide-dependent glucose dehydrogenase (FAD-GDH) and thionine (TH) using a series of cross-linkers, including epoxy, N-hydroxysuccinimide (NHS), and aldehydes. In this technique, FAD-GDH and thionine are conjugated through an amine cross-linking reaction to generate a redox network, which has been successfully employed for the oxidation of glucose. The bioconjugation chemistry of cross-linkers with the amino groups on FAD-GDH and thionine plays a vital role in generating distinct network structures. The epoxy-type cross-linker reacts with the primary and secondary amines of thionine at room temperature, thereby producing an FAD-GDH-TH-FAD-GDH hyperbranched bioconjugate network, the aldehyde undergoes a rapid cross-linking reaction to produce a network of FAD-GDH-FAD-GDH, while the NHS-based cross-linker can react with the primary amines of both FAD-GDH and thionine, forming an FAD-GDH-cross-linker-TH polymeric network. This reaction has the potential to enable the conjugation of a redox mediator with a FAD-GDH network, which is particularly essential when designing an enzyme electrode platform. The data demonstrated that the polymeric cross-linked network based on the NHS cross-linker exhibited a considerable increase in electron transport while producing a catalytic current of 830 μA cm-2. The cross-linker spacer arm length also affects the overall electrochemical function of the network and its performance; an adequate spacer length containing a cross-linker is required, resulting in a faster electron transfer. Finally, a leaching test confirmed that the stability of the enzyme electrode was improved when the electrode was tested using the redox probe. This study elucidates the relationship between cross-linking chemistry and redox network structure and enhances the high performance of enzyme electrode platforms for the oxidation of glucose.

Enzyme modified biodegradable plastic preparation and performance in anaerobic co-digestion with food waste

A modified biodegradable plastic (PLA/PBAT) was developed by through covalent bonding with proteinase K, porcine pancreatic lipase, or amylase, and was then investigated in anaerobic co-digestion mixed with food waste. Fluorescence microscope validated that enzymes could remain stable in modified the plastic, even after co-digestion. The results of thermophilic anaerobic co-digestion showed that, degradation of the plastic modified with Proteinase K increased from 5.21 ± 0.63 % to 29.70 ± 1.86 % within 30 days compare to blank. Additionally, it was observed that the cumulative methane production increased from 240.9 ± 0.5 to 265.4 ± 1.8 mL/gVS, and the methane production cycle was shortened from 24 to 20 days. Interestingly, the kinetic model suggested that the modified the plastic promoted the overall hydrolysis progression of anaerobic co-digestion, possibly as a result of the enhanced activities of Bacteroidota and Thermotogota. In conclusion, under anaerobic co-digestion, the modified the plastic not only achieved effective degradation but also facilitated the co-digestion process.

Site-directed lysine modification of xylanase for oriented immobilization onto silicon dioxide nanoparticles

Enhanced covalent immobilization of xylanase from Chaetomium globosum (XylCg) onto SiO₂ nanoparticles was achieved by the modification of surface residues. The mutation of surface residues to lysine by site-directed mutagenesis increased the immobilization efficiency (IE) and immobilization yield (IY). The immobilized mutant XylCg (N172K-H173K-S176K-K133A-K148A) exhibited an IY of 99.5% and IE of 135%, which were 1.8- and 4.3-fold higher than immobilized wildtype (WT). Regarding the catalytic properties, the k_cat and k_cat/K_m values were 1850 s^-1 and 2030 mL mg^-1 s^-1 for the immobilized mutant, and 331 s^-1 and 404 mL mg^-1 s^-1 for the immobilized WT, respectively. Additionally, the immobilized mutant exhibited four times higher thermal stability than the immobilized WT at 60 °C. These results suggest that surface-mutated lysine residues confer good stability and orientation on the support matrix, thus improving the overall performance of xylanase.

Immobilization and characterization of cellulase on hydroxy and aldehyde functionalized magnetic Fe2O3/Fe3O4 nanocomposites prepared via a novel rapid combustion process

In this work, magnetic Fe₂O₃/Fe₃O₄ nanocomposites were prepared via a novel rapid combustion process. The silica was precipitated on the surface of Fe₂O₃/Fe₃O₄ nanocomposites. The silica-coated magnetic nanocomposites were cross-linked with glutaraldehyde, on which cellulase was covalently immobilized. The morphology, composition, and property of the prepared nanomaterials were characterized by the scanning electron microscopy (SEM), the energy dispersive spectrometry (EDS), the X-ray diffraction (XRD), the vibrating sample magnetometer (VSM), and the Fourier transform infrared (FTIR) spectroscopy. The immobilization conditions were optimized by varying operating parameters and determined to be 0.05 mL of 0.5% cellulase solution for 2 h. The catalytic stabilities of the immobilized cellulase were evaluated. The results showed that the immobilized cellulases performed higher apparent activity at pH 4.5 and exhibited good thermal stability compared with their free counterparts. The Michaelis-Menten equation showed that K_m and V_max of free cellulase were 3.46 mol·L^-1 and 0.53 mol·min^-1, respectively. The immobilized cellulase had higher K_m and V_max (18.99 mol·L^-1 and 0.59 mol·min^-1). The retained activity of the immobilized cellulase maintained over 71% of the initial activity after being used for five cycles.