Fe3O4@Au nanoparticles-based magnetoplatform for the HMGA maize endogenous gene electrochemical genosensing

Development of an electrochemical DNA-based biosensor for the detection of the cardiovascular pharmacogenetic-altering SNP CYP2C9*3

Cardiovascular diseases are among the major causes of mortality and morbidity. Warfarin is often prescribed for these disorders, an anticoagulant with inter and intra-dosage variability dose required to achieve the target international normalized ratio. Warfarin presents a narrow therapeutic index, and due to its variability, it can often be associated with the risk of hemorrhage, or in other patients, thromboembolism. Single-nucleotide polymorphisms are included in the causes that contribute to this variability. The Cytochrome P450 (CYP) 2C9*3 genetic polymorphism modifies its enzymatic activity, and hence warfarin's plasmatic concentration. Thus, the need for a selective, rapid, low-cost, and real-time detection device is crucial before prescribing warfarin. In this work, a disposable electrochemical DNA-based biosensor capable of detecting CYP2C9*3 polymorphism was developed. By analyzing genomic databases, two specific 78 base pairs DNA probes; one with the wild-type adenine (Target-A) and another with the cytosine (Target-C) single-nucleotide genetic variation were designed. The biosensor implied the immobilization on screen-printed gold electrodes of a self-assembled monolayer composed by mercaptohexanol and a linear CYP2C9*3 DNA-capture probe. To improve the selectivity and avoid secondary structures a sandwich format of the CYP2C9*3 allele was designed using complementary fluorescein isothiocyanate-labeled signaling DNA probe and enzymatic amplification of the electrochemical signal. Chronoamperometric measurements were performed at a range of 0.015-1.00 nM for both DNA targets achieving limit of detection of 42 p.m. The developed DNA-based biosensor was able to discriminate between the two synthetic target DNA targets, as well as the targeted denatured genomic DNA, extracted from volunteers genotyped as non-variant homozygous (A/A) and heterozygous (A/C) of the CYP2C9*3 polymorphism.

Iron/iron oxide-based magneto-electrochemical sensors/biosensors for ensuring food safety: recent progress and challenges in environmental protection

Foodborne diseases have arisen due to the globalization of industry and the increase in urban population, which has led to increased demand for food and has ultimately endangered the quality of food. Foodborne diseases have caused some of the most common public health problems and led to significant social and economic issues worldwide. Food quality and safety are affected by microbial contaminants, growth-promoting feed additives (β-agonists and antibiotics), food allergens, and toxins in different stages from harvesting to storage and marketing of products. Electrochemical biosensors, due to their reduced size and portability, low cost, and low consumption of reagents and samples, can quickly provide valuable quantitative and qualitative information about food contamination. In this regard, using nanomaterials can increase the sensitivity of the assessment. Magnetic nanoparticle (MNP)-based biosensors, especially, are receiving significant attention due to their low-cost production, physicochemical stability, biocompatibility, and eco-friendly catalytic characteristics, along with magnetic, biological, chemical and electronic sensing features. Here, we provide a review on the application of iron-based magnetic nanoparticles in the electrochemical sensing of food contamination. The types of nanomaterials used in order to improve the methods and increase the sensitivity of the methods have been discussed. Then, we stated the advantages and limitations of each method and tried to state the research gaps for each platform/method. Finally, the role of microfluidic and smartphone-based methods in the rapid detection of food contamination is stated. Then, various techniques like label-free and labelled regimes for the sensitive monitoring of food contamination were surveyed. Next, the critical role of antibody, aptamer, peptide, enzyme, DNA, cells and so on for the construction of specific bioreceptors for individual and simultaneous recognition by electrochemical methods for food contamination were discussed. Finally, integration of novel technologies such as microfluidic and smartphones for the identification of food contaminations were investigated. It is important to point out that, in the last part of each sub-section, attained results of different reports for each strategy were compared and advantages/limitations were mentioned.

Recent Advances in Synthesis, Medical Applications and Challenges for Gold-Coated Iron Oxide: Comprehensive Study

Combining iron oxide nanoparticles (Fe3O4 NPs) and gold nanoparticles (Au NPs) in one nanostructure is a promising technique for various applications. Fe3O4 NPs have special supermagnetic attributes that allow them to be applied in different areas, and Au NPs stand out in biomaterials due to their oxidation resistance, chemical stability, and unique optical properties. Recent studies have generally defined the physicochemical properties of nanostructures without concentrating on a particular formation strategy. This detailed review provides a summary of the latest research on the formation strategy and applications of Fe3O4@Au. The diverse methods of synthesis of Fe3O4@Au NPs with different basic organic and inorganic improvements are introduced. The role and applicability of Au coating on the surface of Fe3O4 NPs schemes were explored. The 40 most relevant publications were identified and reviewed. The versatility of combining Fe3O4@Au NPs as an option for medical application is proven in catalysis, hyperthermia, biomedical imaging, drug delivery and protein separation.

PNA-functionalized magnetic microbeads as substrates for enzyme-labelled voltammetric genoassay for DNA sensing applied to identification of GMO in food

A novel enzyme-labelled voltammetric magnetogenoassay for DNA sensing based on the use of carboxyl-surface coated magnetic microbeads functionalized with PNA probes and subsequent read-out on screen-printed electrode (SPE) substrates was developed. The assay was validated for determination of non-amplified genomic DNA from genetically modified Roundup Ready soy. Outstanding performance with respect to other genoassays requiring preliminary amplification of target DNA via PCR was demonstrated. The analytical performance was also improved compared to previous methods based on the immobilization of the same PNA probes on SPE substrates, since the method was found capable of achieving LOD and LOQ of 415 fM and 995 fM, respectively. The ability of the magnetogenoassay to detect the presence of Roundup Ready soy DNA sequence was tested on genomic DNA extract from European Reference Material soy flours, demonstrating the capability of the method to match the European Union regulation for labelling of food containing a percentage of GM products greater than 0,9%.

Biosensing platform on ferrite magnetic nanoparticles: Synthesis, functionalization, mechanism and applications

Ferrite magnetic nanoparticles (FMNPs) are gaining popularity to design biosensors for high-performance clinical diagnosis. The fusion of information shows that FMNPs based biosensors require well-tuned FMNPs as detection probes to produce large and specific biological signals with minimal non-specific binding. Nevertheless, there is a noticeable lacuna of information to solve the issues related to suitable synthesis route, particle size reduction, functionalization, sensitivity towards targeted intercellular biological tiny particles, and lower signal-to-noise ratio. Therefore it allows exploring unique characteristics of FMNPs to design a suitable sensing device for intracellular measurements and diseases detection. This review focuses on the extensively used synthesis routes, their advantages and limitations, crystalline structure, functionalization, along with recent applications of FMNPs in biosensors, taking into consideration their analytical figures of merit and range of linearity. This work also addresses the current progress, key factors for sensitivity, selectivity and productivity improvement along with the challenges, future trends and perspectives of FMNPs based biosensors.

Electrochemical determination of hantavirus using gold nanoparticle-modified graphene as an electrode material and Cu-based metal-organic framework assisted signal generation

An electrochemical biosensor was prepared for nucleic acid-based hantavirus detection using a Cu-based metal-organic framework (CuMOF) as a signal tag. The CuMOF was synthesized by the solvothermal method and then covalently bonded with signal DNA (sDNA) probes. The Au nanoparticles and reduced graphene oxide composite were deposited on the electrode surface by electroreduction as support substrate and was then functionalized with capture DNA (cDNA) probes by self-assembly. Through the complementary base pairing, the target DNA (tDNA) fragment of hantavirus hybridized with the cDNA and the sDNA in a sandwich-type format. The tDNA was detected according to the current signal of the CuMOF catalyzed reaction using o-phenylenediamine as redox substrate. The peak current of the biosensor at - 0.55 V increased linearly in proportion to the logarithmic value of the tDNA concentration from 10^-15 to 10^-9 mol/L, with a detection limit of 0.74 × 10^-15 mol/L. Moreover, the proposed biosensor was successfully applied to detect hantavirus and was able to distinguish hantavirus from other arboviruses.

Application of DNA-Nanosensor for Environmental Monitoring: Recent Advances and Perspectives

PURPOSE OF REVIEW

Environmental pollutants are threat to human beings. Pollutants can lead to human health and environment hazards. The purpose of this review is to summarize the work done on detection of environmental pollutants using DNA nanosensors and challenges in the areas that can be focused for safe environment.

RECENT FINDINGS

Most of the DNA-based nanosensors designed so far use DNA as recognition element. ssDNA, dsDNA, complementary mismatched DNA, aptamers, and G-quadruplex DNA are commonly used as probes in nanosensors. More and more DNA sequences are being designed that can specifically detect various pollutants even simultaneously in complex milk, wastewater, soil, blood, tap water, river, and pond water samples. The feasibility of direct detection, ease of designing, and analysis makes DNA nanosensors fit for future point-of-care applications.

SUMMARY

DNA nanosensors are easy to design and have good sensitivity. DNA component and nanomaterials can be designed in a controlled manner to detect various environmental pollutants. This review identifies the recent advances in DNA nanosensor designing and opportunities available to design nanosensors for unexplored pathogens, antibiotics, pesticides, GMO, heavy metals, and other toxic pollutant.

Electrochemical Affinity Biosensors Based on Selected Nanostructures for Food and Environmental Monitoring

The excellent capabilities demonstrated over the last few years by electrochemical affinity biosensors should be largely attributed to their coupling with particular nanostructures including dendrimers, DNA-based nanoskeletons, molecular imprinted polymers, metal-organic frameworks, nanozymes and magnetic and mesoporous silica nanoparticles. This review article aims to give, by highlighting representative methods reported in the last 5 years, an updated and general overview of the main improvements that the use of such well-ordered nanomaterials as electrode modifiers or advanced labels confer to electrochemical affinity biosensors in terms of sensitivity, selectivity, stability, conductivity and biocompatibility focused on food and environmental applications, less covered in the literature than clinics. A wide variety of bioreceptors (antibodies, DNAs, aptamers, lectins, mast cells, DNAzymes), affinity reactions (single, sandwich, competitive and displacement) and detection strategies (label-free or label-based using mainly natural but also artificial enzymes), whose performance is substantially improved when used in conjunction with nanostructured systems, are critically discussed together with the great diversity of molecular targets that nanostructured affinity biosensors are able to quantify using quite simple protocols in a wide variety of matrices and with the sensitivity required by legislation. The large number of possibilities and the versatility of these approaches, the main challenges to face in order to achieve other pursued capabilities (development of antifouling, continuous operation, wash-, calibration- and reagents-free devices, regulatory or Association of Official Analytical Chemists, AOAC, approval) and decisive future actions to achieve the commercialization and acceptance of these devices in our daily routine are also noted at the end.

Colorimetric biosensing of nopaline synthase terminator using Fe3O4@Au and hemin-functionalized reduced graphene oxide

In this paper, we present a simple and label-free colorimetric biosensor for detection of the nopaline synthase (NOS) terminator in genetically modified (GM) plants. The "signal on" colorimetric biosensor was developed using a nanocomposite consisted of gold nanoparticles doped magnetic Fe₃O₄ nanoparticles (Fe₃O₄@Au NP), capture probe DNA (cDNA), and hemin-functionalized reduced graphene oxide nanosheets (H-GN). The nanocomposite was successfully prepared by means of Au-S bonds and the strong π interactions between cDNA and H-GN. The sensing approach is based on the excellent peroxidase-mimicking activity of H-GN and its different electrostatic interactions with single-stranded DNA (ssDNA) and double-stranded DNA (dsDNA). In presence of the target NOS, the cDNA in the nanocomposite will hybridize with its complementary sequence, and form dsDNA structure. Due to the weak π interactions between dsDNA and H-GN, a portion of H-GN will be released from the surface of Fe₃O₄@Au NPs and transferred into solution. After magnetic separation was performed, the supernatant was incubated with 3,3',5,5'-tetramethylbenzidine (TMB) in the presence of H₂O₂. The released H-GN can catalyze the oxidation reaction of TMB and turn the colorless solution blue. This "signal-on" colorimetric biosensor shows a broad linear range of 0.5-100 nM for the target NOS, with a 0.19 nM detection limit. The application of the biosensor for determination of NOS segments in samples of GM and non-GM tomatoes shows that it can discriminate between GM and non-GM plants. The reliability of the method for samples of NOS-spiked GM tomato suggests satisfactory recoveries in the range of 93.6%-94.2%.

Biosensing and Delivery of Nucleic Acids Involving Selected Well-Known and Rising Star Functional Nanomaterials

In the last fifteen years, the nucleic acid biosensors and delivery area has seen a breakthrough due to the interrelation between the recognition of nucleic acid's high specificity, the great sensitivity of electrochemical and optical transduction and the unprecedented opportunities imparted by nanotechnology. Advances in this area have demonstrated that the assembly of nanoscaled materials allows the performance enhancement, particularly in terms of sensitivity and response time, of functional nucleic acids' biosensing and delivery to a level suitable for the construction of point-of-care diagnostic tools. Consequently, this has propelled detection methods using nanomaterials to the vanguard of the biosensing and delivery research fields. This review overviews the striking advancement in functional nanomaterials' assisted biosensing and delivery of nucleic acids. We highlight the advantages demonstrated by selected well-known and rising star functional nanomaterials (metallic, magnetic and Janus nanomaterials) focusing on the literature produced in the past five years.