Using target-specific aptamers to enhance the peroxidase-like activity of gold nanoclusters for colorimetric detection of tetracycline antibiotics

Colorimetric detection of neomycin sulfate in serum based on ultra-small gold nanoparticles with peroxidase-like activity

Neomycin sulfate (NEO) is a kind of aminoglycoside antibiotics. Because of its strong ototoxicity, nephrotoxicity and other side effects, its content in the body should be strictly monitored during use. In this paper, a rapid colorimetric detection method for NEO based on ultrasmall polyvinylpyrrolidone modified gold nanoparticles (PVP/Au NPs) with peroxidase-like activity was developed. Firstly, ultra small PVP/Au NPs with weak peroxidase-like activity were synthetized. When they were mixed with NEO, strong hydrogen bonds were formed between NEO and PVP, resulting in the aggregation of PVP/Au NPs, and the aggregated PVP/Au NPs showed stronger peroxidase-like activity. Therefore, rapid colorimetric detection of NEO was achieved by utilizing the enhanced peroxidase-like activity mechanism caused by the aggregation of ultra small PVP/Au NPs. The naked eye detection limit of this method is 50 nM. Within the range of 1 nM-300 nM, there was a good linear relationship between NEO concentration and the change in absorbance intensity of PVP/Au NPs-H2O2-TMB solution at 652 nm, with the regression curve of y = 0.0045x + 0.0525 (R2 = 0.998), and the detection limit is 1 nM. In addition, this method was successfully applied to the detection of NEO in mouse serum. The recoveries were 104.4 % -107.6 % compared with HPLC assay results, indicating that this method for NEO detection based on PVP/Au NPs has great potential in actual detection of NEO in serum.

An aptamerelectrochemical sensor based on functional carbon nanofibers for tetracycline determination

Fe-Co@CNF was synthesized by electrospinning technology, and AuNPs was loaded onto Fe-Co@CNF by in-situ reduction to obtain Fe-Co@CNF@AuNPs composite material, which was used as the working electrode based on Au-S bond cooperation. The tetracycline electrochemical sensing interface Fe-Co@CNF@AuNPs@Apt was constructed by connecting mercaptoylated tetracycline (TC) aptamers on Fe-Co@CNF@AuNPs surface. The morphology and composition of Fe-Co@CNF@AuNPs composites were characterized by SEM, TEM, EDS, XRD and XPS, and the electrochemical properties of tetracycline were evaluated by CV and DPV. The results showed that the addition of Fe and Co did not destroy the structure of the original carbon nanofibers, and their synergistic effect enhanced the electrocatalytic performance, effective electrode area and electron transfer ability of carbon nanofibers. AuNPs are evenly distributed over the fibers, which effectively improves the electrical conductivity of the material. Under the optimal conditions, the theoretical detection limit of tetracycline was 0.213 nM, and the linear detection range was 5.12-10 mM, which could successfully detect tetracycline in milk.

The potential use of nanozymes as an antibacterial agents in oral infection, periodontitis, and peri-implantitis

Several studies suggest that oral pathogenic biofilms cause persistent oral infections. Among these is periodontitis, a prevalent condition brought on by plaque biofilm. It can even result in tooth loss. Furthermore, the accumulation of germs around a dental implant may lead to peri-implantitis, which damages the surrounding bone and gum tissue. Furthermore, bacterial biofilm contamination on the implant causes soft tissue irritation and adjacent bone resorption, severely compromising dental health. On decontaminated implant surfaces, however, re-osseointegration cannot be induced by standard biofilm removal techniques such as mechanical cleaning and antiseptic treatment. A family of nanoparticles known as nanozymes (NZs) comprise highly catalytically active multivalent metal components. The most often employed NZs with antibacterial activity are those that have peroxidase (POD) activity, among other types of NZs. Since NZs are less expensive, more easily produced, and more stable than natural enzymes, they hold great promise for use in various applications, including treating microbial infections. NZs have significantly contributed to studying implant success rates and periodontal health maintenance in periodontics and implantology. An extensive analysis of the research on various NZs and their applications in managing oral health conditions, including dental caries, dental pulp disorders, oral ulcers, peri-implantitis, and bacterial infections of the mouth. To combat bacteria, this review concentrates on NZs that imitate the activity of enzymes in implantology and periodontology. With a view to the future, there are several ways that NZs might be used to treat dental disorders antibacterially.

Enhanced Nanozymatic Activity on Rough Surfaces for H2O2 and Tetracycline Detection

The needless use of tetracyclines (TCs) in foodstuffs is a huge health concern in low- and middle-income and Arab countries. Herein, a sensitive and faster monitoring system for H2O2 and TCs is proposed, utilizing the large surface-to-volume ratio of a non-spherical gold nanoparticle/black phosphorus nanocomposite (BP-nsAu NPs) for the first time. BP-nsAu NPs were synthesized through a single-step method that presented nanozymatic activity through 3,3',5,5'-Tetramethylbenzidine (TMB) oxidation while H2O2 was present and obeyed the Michaelis-Menten equation. The nanozymatic activity of the BP-nsAu NPs was enhanced 12-fold and their detection time was decreased 83-fold compared to conventional nanozymatic reactions. The proposed method enabled us to quantify H2O2 with a limit of detection (LOD) value of 60 nM. Moreover, target-specific aptamer-conjugated BP-nsAu NPs helped us detect TCs with an LOD value of 90 nM. The present strategy provides a proficient route for low-level TC monitoring in real samples.

Aptamer functionalized gold nanoclusters as an emerging nanoprobe in biosensing, diagnostic, catalysis and bioimaging

DNA nanostructures, with their fascinating luminescent and detecting capabilities, provide a basis that can accommodate a wide range of applications. The unique electronic configurations, and physical and chemical properties of aptamer-assembled gold nanoclusters (apt-AuNCs) as a novel type of fluorophore have gradually piqued the interest of the scientific community. Bending DNA sequences and other templates/legends as a stabilizing agent with Au metal has produced an abundance of biosensors, along with catalytic and imaging properties. This review article summarizes the synthesis, conjugation tactics, advantages, and sensing mechanisms of AuNCs aptasensor after providing a brief introduction to the topic. Moreover, the application of DNA/aptamer functionalization has been briefly discussed in the fields of food safety and quality, catalysis, clinical diagnosis, cancer cell bioimaging, detection of cancer cell indicators, and therapy. We also concluded the current obstacles and made recommendations about the future prospects of AuNCs for fundamental research and applications in line with the developments in DNA/aptamer-AuNCs.

Challenges and Opportunities of Using Fluorescent Metal Nanocluster-Based Colorimetric Assays in Medicine

Development of rapid colorimetric methods based on novel optical-active metal nanomaterials has provided methods for the detection of ions, biomarkers, cancers, etc. Fluorescent metal nanoclusters (FMNCs) have gained a lot of attention due to their unique physical, chemical, and optical properties providing numerous applications from rapid and sensitive detection to cellular imaging. However, because of very small color changes, their colorimetric applications for developing rapid tests based on the naked eye or simple UV-vis absorption spectrophotometry are still limited. FMNCs with peroxidase-like activity have significant potential in a wide variety of applications, especially for point-of-care diagnostics. In this review, the effect of using various capping agents and metals for the preparation of nanoclusters in their colorimetric sensing properties is explored, and the synthesis and detection mechanisms and the recent advances in their application for ultrasensitive chemical and biological analysis regarding human health are highlighted. Finally, the challenges that remain as well as the future perspectives are briefly discussed. Overcoming these limitations will allow us to expand the nanocluster's application for colorimetric diagnostic purposes in medical practice.

A novel multifunctional magnetically recyclable BiOBr/ZnFe2O4-GO S-scheme ternary heterojunction: Photothermal synergistic catalysis under Vis/NIR light and NIR-driven photothermal detection of tetracycline

The threat of tetracycline (TC) to human health has become a significant issue that cannot be disregarded. Herein, in order to achieve effective degradation and high-sensitivity detection of TC, BiOBr/ZnFe2O4-GO (BOB/ZFO-GO) S-scheme heterojunction nanocomposites (NCs) have been prepared using hydrothermal method. GO with high light absorption capacity accelerated the electron transfer between BiOBr and ZnFe2O4 nanocrystals and extended the light absorption region of BOB/ZFO NCs. The optimal GO addition of BOB/ZFO-GO NCs could degrade TC solution of 10 mg/L in 80 min and have a high reaction rate constant (k) of 0.072 min-1 under visible/NIR light. According to calculations, the non-metal photocatalyst (BOB/ZFO-GO(2)) with the best degradation performance had a photothermal conversion efficiency of up to 23%. Meanwhile, BOB/ZFO-GO NCs could be recycled by magnetic field. The excellent photocatalytic and photothermal performance could be maintained even after several cycles. In addition, a photothermal detection sensor based on a photothermal material/specific recognition element/tetracycline sandwich-type structure was constructed for the trace detection of TC concentration with a detection limit as low as 10-4 ng/mL. This research provides a unique idea for the multi-functionalization of photocatalysts and has a wide range of potential applications for the identification and treatment of organic wastewater.

Application and evaluation of molecular docking for aptamer and small molecular interaction - A case study with tetracycline antibiotics

Molecular docking (MD) analysis is currently the most commonly used theoretical simulation method to investigate the interaction of aptamers (receptors) and small molecules (ligands) and understand the recognition mechanism between them at a molecular level. Using the specific aptamers of tetracycline antibiotics (tetracycline (TET), oxytetracycline (OTC), doxycycline (DOC)) as the docking models, three steady-state aptamers of tertiary structures (SATS) were established for each aptamer with the UNAFold and RNAComposer tools. The binding free energy (BFE), docking score (DS), and binding site (base) of the specific ligands (TET, OTC, and DOC) with their respective SATS were obtained by molecular docking. The results revealed one or more binding sites in the established SATS of the aptamers. The BFE and DS of different binding sites of one specific SATS varied significantly. The results also revealed that the site with the highest BFE represented the most dominant binding site, even if it was not the SATS with minimum energy. The BFE values could also be used to evaluate the affinity and specificity of the aptamer to its target. For the first time, this study proposes a method for MD analysis of the aptamer and its target based on different SATS, clarification of the binding mode, and prediction of the binding sites (bases). This study provides a theoretical basis for tailoring; structural optimization; and base modification of aptamers; identifying aptamers with high affinity and specificity.

Optical nanosensors based on noble metal nanoclusters for detecting food contaminants: A review

Food contaminants present a significant threat to public health. In response to escalating global concerns regarding food safety, there is a growing demand for straightforward, rapid, and sensitive detection technologies. Noble metal nanoclusters (NMNCs) have garnered considerable attention due to their superior attributes compared to other optical materials. These attributes include high catalytic activity, excellent biocompatibility, and outstanding photoluminescence properties. These features render NMNCs promising candidates for crafting nanosensors for food contaminant detection, offering the potential for the development of uncomplicated, swift, sensitive, user-friendly, and cost-effective detection approaches. This review investigates optical nanosensors based on NMNCs, including the synthesis methodologies of NMNCs, sensing strategies, and their applications in detecting food contaminants. Furthermore, it involves a comparative assessment of the applications of NMNCs in optical sensing and their performance. Ultimately, this paper imparts fresh perspectives on the forthcoming challenges. Hitherto, optical (particularly fluorescent) nanosensors founded on NMNCs have demonstrated exceptional sensing capabilities in the realm of food contaminant detection. To enhance sensing performance, future research should prioritize atomically precise NMNCs synthesis, augmentation of catalytic activity and optical properties, development of high-throughput and multimode sensing, integration of NMNCs with microfluidic devices, and the optimization of NMNCs storage, shelf life, and transportation conditions.

Rapid and sensitive detection of tetracycline residue in food samples using Cr(III)-MOF fluorescent sensor

As tetracycline antibiotics were used in the poultry sector, their residue in edible animal products may adversely affect food safety and human health. The development of selective and sensitive tetracycline sensors has garnered a lot of interest due to the complexity of food samples. Therefore, a fluorescent sensing probe based on chromium(III)-metal-organic framework was developed for the rapid detection of tetracycline. After the addition of tetracycline, blue emission at λem 410 nm was effectively quenched by the interaction between TC and Cr(III)-metal-organic framework material. Under optimized conditions (sensor concentration: 30 mg/L and pH: 10.0), the sensing probe showed a fast response time (1 min), and low detection limit (0.78 ng/mL) with a linear range (5-45 ng/mL). Interestingly, the Cr(III)-metal-organic framework was successfully applied to quantity tetracycline residue in chicken meat and egg samples with recoveries of 95.17-06.93%. To deduce, our work can provide a new strategy for the direct detection of tetracycline in food samples.

Recent Advances in Design and Application of Nanomaterials-Based Colorimetric Biosensors for Agri-food Safety Analysis

A colorimetric sensor detects an analyte by utilizing the optical properties of the sensor unit, such as absorption or reflection, to generate a structural color that serves as the output signal to detect an analyte. Detecting the refractive index of an analyte by recording the color change of the sensor structure on its surface has several advantages, including simple operation, low cost, suitability for onsite analysis, and real-time detection. Colorimetric sensors have drawn much attention owing to their rapidity, simplicity, high sensitivity and selectivity. This Review discusses the use of colorimetric sensors in the food industry, including their applications for detecting food contaminants. The Review also provides insight into the scope of future research in this area.

Highly photoluminescent tryptophan-coated copper nanoclusters based turn-off fluorescent probe for determination of tetracyclines

Employing cheap Cu nanoclusters to design a novel fluorescent probe have promising opportunities in the field of optical sensors. Here, we fabricated a highly photoluminescent D-tryptophan (D-Trp)-coated Cu nanoclusters (Trp-Cu NCs) by rapid microwave-assisted method to achieve precise quantification of tetracyclines (TC). Due to protecting groups of Trp, the synthesized Trp-Cu NCs have remarkable fluorescence stability with a quantum yield reached 12.5%. A distinct fluorescence quenching with the incremental addition of TC via the internal filtration effect (IFE). Based on turn-off fluorescence within 1 min, a detection method for detecting TC was constructed with a linear range of 0.3-120 μM and a limit of detection (LOD) of 0.12 μM. Besides, the proposed fluorescent probe has been employed for the determination of practical samples such as water samples, milk and honey, and exhibited satisfactory recoveries of 96.1%-108.2%, with relative standard deviations (RSD) lower than 5.0%. This is a sensitive, rapid and easily recognizable Trp-Cu NCs based sensing platform for the determination of TC, which could offer a powerful tool for ensuring food safety.

A Multi-Enzyme Cascade Response for the Colorimetric Recognition of Organophosphorus Pesticides Utilizing Core-Shell Pd@Pt Nanoparticles with High Peroxidase-like Activity

In modern agricultural practices, organophosphorus pesticides or insecticides (OPs) are regularly used to restrain pests. Their limits are closely monitored since their residual hinders the capability of acetylcholinesterase (AChE) and brings out a threatening accumulation of the neurotransmitter acetylcholine (ACh), which affects human well-being. Therefore, spotting OPs in food and the environment is compulsory to prevent human health. Several techniques are available to identify OPs but encounter shortcomings like time-consuming, operating costs, and slow results achievement, which calls for further solutions. Herein, we present a rapid colorimetric sensor for quantifying OPs in foods using TMB as a substrate, a multi-enzyme cascade system, and the synergistic property of core-shell Palladinum@Platinum (Pd@Pt) nanoparticles. The multi-enzyme cascade response framework is a straightforward and effective strategy for OPs recognition and can resolve the previously mentioned concerns. Numerous OPs, including Carbofuran, Malathion, Parathion, Phoxim, Rojor, and Phosmet, were successfully quantified at different concentrations. The cascade method established using Pd@Pt had a simple and easy operation, a lower detection limit range of (1-2.5 ng/mL), and a short detection time of about 50 min. With an R2 value of over 0.93, OPs showed a linear range of 10-200 ng/mL, portraying its achievement in quantifying pesticide residue. Lastly, the approach was utilized in food samples and recovered more than 80% of the residual OPs.

Recent advances in luminescence and aptamer sensors based analytical determination, adsorptive removal, degradation of the tetracycline antibiotics, an overview and outlook

Tetracycline antibiotics (TCs), one of the important antibiotic groups, have been widely used in human and veterinary medicines. Their residues in foodstuff, soil and sewage have caused serious threats to food safety, ecological environment and human health. Here, we reviewed the potential harms of TCs residues to foodstuff, environment and human beings, discussed the luminescence and aptamer sensors based analytical determination, adsorptive removal, and degradation strategies of TCs residues from a recent 5-year period. The advantages and intrinsic limitations of these strategies have been compared and discussed, the potential challenges and opportunities in TCs residues degradation have also been deliberated and explored.

Aptamer Sensors for the Detection of Antibiotic Residues- A Mini-Review

Food security is a global issue, since it is closely related to human health. Antibiotics play a significant role in animal husbandry owing to their desirable broad-spectrum antibacterial activity. However, irrational use of antibiotics has caused serious environmental pollution and food safety problems; thus, the on-site detection of antibiotics is in high demand in environmental analysis and food safety assessment. Aptamer-based sensors are simple to use, accurate, inexpensive, selective, and are suitable for detecting antibiotics for environmental and food safety analysis. This review summarizes the recent advances in aptamer-based electrochemical, fluorescent, and colorimetric sensors for antibiotics detection. The review focuses on the detection principles of different aptamer sensors and recent achievements in developing electrochemical, fluorescent, and colorimetric aptamer sensors. The advantages and disadvantages of different sensors, current challenges, and future trends of aptamer-based sensors are also discussed.

A turn-off fluorimetric -aptasensor for early detection of apoptosis inside the cells

To detect cytochrome c (Cyt c) as an important biomarker of apoptosis inside the cells, a simple, label-free, fluorometric detection method has been presented. For this purpose, an aptamer/gold nanocluster probe (Aptamer@AuNCs) was produced which could specifically bind to Cyt c leading to fluorescence quenching of AuNCs. The developed aptasensor showed two linear ranges of 1-80 μM and 100-1000 μM and a detection limit of 0.77 μM and 297.5 μM, respectively. This platform was successfully used to assay Cyt c release inside the apoptotic cells and their cell lysate. Aptamer@AuNC due to its enzyme-like properties could replace antibodies in Cyt c detection by conventional blotting techniques.

Glutamic acid-capped iron oxide quantum dots as fluorescent nanoprobe for tetracycline in urine

The fabrication of iron oxide quantum dots (IO-QDs) modified with glutamic acid (Glu) under controllable conditions is reported. The IO-QDs have been characterized by transmission electron microscopy, spectrofluorometry, powder X-ray diffraction, vibrating sample magnetometry, UV-Vis spectroscopy, X-ray photoelectron spectroscopy, and Fourier-transform infrared spectroscopy. The IO-QDs exhibited good stability towards irradiation, temperature elevations, and ionic strength, and the quantum yield (QY) of IO-QDs was calculated to be 11.91 ± 0.09%. The IO-QDs were furtherly measured at an excitation wavelength of 330 nm with emission maxima at 402 nm, which were employed to detect tetracycline (TCy) antibiotics, including tetracycline (TCy), chlortetracycline (CTCy), demeclocycline (DmCy), and oxytetracycline (OTCy) in biological samples. The results indicated that TCy, CTCy, DmCy, and OTCy in urine samples show a dynamic working range between 0.01 and 80.0 μM; 0.01 and 1.0 μM; 0.01 and 10 μM; and 0.04 and 1.0 μM, respectively, with detection limits of 7.69 nM, 120.23 nM, 18.20 nM, and 67.74 nM, respectively. The detection was not interfered with by the auto-fluorescence from the matrices. In addition, the obtained recovery in real urine samples suggested that the developed method could be used in practical applications. Therefore, the current study has prospect to develop an easy, fast, eco-friendly, and efficient new sensing method for detecting tetracycline antibiotics in biological samples.

A simple paper-based nickel nanocluster-europium mixed ratio fluorescent probe for rapid visual sensing of tetracyclines

In this work, a ratiometric fluorometric sensor based on nickel nanoclusters (NiNCs)-europium complex (NiNCs-Eu³⁺) was constructed for the highly selectivity detection of tetracyclines (TCs) in water samples. In the presence of TCs, the blue fluorescence of the sensor NiNCs-Eu³⁺ was quenched at 430 nm and the characteristic red fluorescence of Eu³⁺-TCs appeared at 620 nm because of the combined help of inner filter effect (IFE) and antenna effect. Under the optimized conditions (100 mM Eu³⁺ (100 µL); temperature (25℃); reaction time (10 min), HEPES buffer solution (pH = 7.0)), the sensor offered a wide detection range of tetracycline (TC) and oxytetracycline (OTC) from 0.1 to 50 μM with the detection limit (LOD) of 25 nM and 21 nM, respectively. Moreover, the sensor was able to detect of TC and OTC in tap and lake water with high recovery rate (89.10%-97.60%). In addition, the portable paper-based sensor was constructed using filter paper embedded with NiNCs-Eu³⁺. The distinct fluorescent color of the paper-based sensor varied from bright blue to red against different concentrations of TC and OTC. These above findings demonstrated the potential for wide application of as-prepared ratio metric fluorescence sensor for visual detection of TCs in water samples.

Porous-nanozyme-based colorimetric sensor for rapid detection of kanamycin in foods under neutral condition

Most colorimetric methods based on nanozymes need to have excellent performance under acidic condition, so they are currently facing some challenges in the field of food hazard detection. Herein, a facile and rapid colorimetric sensor for kanamycin (KAN) detection in foods under neutral condition has been designed using the peroxidase-mimic activity of porous nanozyme like Co₃ O₄ nanodisk. Further investigations showed that the interaction mechanism between porous Co₃ O₄ nanodisk and substrates belongs to a ping-pong model, and the inhibition type of KAN on the peroxidase-mimic activity is noncompetitive inhibition. The constructed sensor has good sensitivity for KAN with the limit of 57 nM, and the color changes can be discerned visually when KAN exceeds 0.5 µM. Besides, the colorimetric sensor obtains excellent recovery results in chicken serum, milk, honey, and pork, which shows that the proposed sensing strategy can provide a rapid and convenient detection method for KAN in foods under neutral condition. PRACTICAL APPLICATION: The established sensing strategy can rapidly distinguish whether KAN residue exceeds the permissible level within 10 min, which meets the requirement for on-site monitoring of antibiotics in foods, and also open up a new idea for other hazards detection under neutral condition.

The preparation of hybrid silicon quantum dots by one-step synthesis for tetracycline detection and antibacterial applications

In this study, we prepared three different silicon quantum dots (SiQDs-1, SiQDs-2 and SiQDs-3) by hydrothermal synthesis with rose Bengal as the reducing agent and triacetoxy(methyl)silane and allyloxytrimethylsilane as silicon sources. The as-prepared SiQDs not only exhibited potent antibacterial activity against Escherichia coli (E. coli) and Staphylococcus aureus (S. aureus) but also showed specific responses to tetracycline (TC). The minimum inhibitory concentrations (MICs) of SiQDs-1, SiQDs-2 and SiQDs-3 were 0.55 mg mL^-1, 0.47 mg mL^-1 and 0.39 mg mL^-1 against E. coli, respectively, and 0.45 mg mL^-1, 0.34 mg mL^-1 and 0.34 mg mL^-1 against S. aureus, respectively. By examining the morphologies of bacteria and generation of reactive oxygen species (ROS), we speculated that these SiQDs shrink the bacteria and even directly destroy the bacterial structural integrity through the production of singlet oxygen. In addition, the fluorescence quenching effectiveness of SiQDs-3 also showed a strong linear relationship with TC concentration in the range of 0-1.2 μM with a detection limit of 0.318 μM, as a result of the internal filtering effect. Together, SiQDs not only can be a candidate to treat resistant bacterial infections, but also may be applied in practical detection of TC.

A Minireview for Recent Development of Nanomaterial-Based Detection of Antibiotics

Antibiotics are considered a new type of organic pollutant. Antibiotic residues have become a global issue due to their harm to human health. As the use of antibiotics is increasing in human life, such as in medicine, crops, livestock, and even drinking water, the accurate analysis of antibiotics is very vital. In order to develop rapid and on-site approaches for the detection of antibiotics and the analysis of trace-level residual antibiotics, a high-sensitivity, simple, and portable solution is required. Meanwhile, the rapid nanotechnology development of a variety of nanomaterials has been achieved. In this review, nanomaterial-based techniques for antibiotic detection are discussed, and some reports that have employed combined nanomaterials with optical techniques or electrochemical techniques are highlighted.

Fluorescence Imaging-Incorporated Transcriptome Study of Glutathione Depletion-Enhanced Ferroptosis Therapy via Targeting Gold Nanoclusters

Ferroptosis plays an important role in tumor inhibition and is a new type of programmed cell death. Recent studies have shown that glutathione (GSH) depletion is an effective method to enhance the therapeutic efficacy of ferroptosis; however, a systematic investigation of the phenomenon is limited. Herein, we provide a facile fluorescence imaging-incorporated transcriptome strategy to visualize the process and explore the mechanism of GSH depletion-enhanced ferroptosis. The proposed multifunctional nanoplatform is achieved using simple transferrin receptor aptamer-functionalized fluorescent gold nanoclusters (termed TfRA-AuNCs), which exhibit efficient hydroxyl radical generation and GSH-depleting capabilities. Live cell fluorescence imaging results revealed that TfRA-AuNCs were endocytosed into 4T1 cells and were mostly distributed in lysosomes. In vitro results indicated that TfRA-AuNCs enhanced the ferroptosis effect in 4T1 cells. Importantly, transcriptome analysis indicated that 4T1 cells treated with TfRA-AuNCs regulated the expression change of ferroptosis-related genes, and the Kyoto Encyclopedia of Genes and Genomes pathway identified the GSH metabolism pathway involved in ferroptosis, thus revealing the exact molecular mechanism of ferroptosis induced by TfRA-AuNCs at the RNA level. Furthermore, in vivo results confirmed the tumor inhibition effect, tumor-targeted fluorescence imaging, and long-term biocompatibility after TfRA-AuNC treatment. This study introduces a new possibility for the mechanistic study of nanoagent-induced ferroptosis in tumor treatment.

Multicolor Biosensor for Trypsin Detection Based on the Regulation of the Peroxidase Activity of Bovine Serum Albumin-Coated Gold Nanoclusters and Etching of Gold Nanobipyramids

The detection of trypsin is significantly important for both clinical diagnosis and disease treatment. In this study, an innovative multicolor sensor for trypsin detection has been established based on the regulation of the peroxidase activity of bovine serum albumin-coated gold nanoclusters (BSA-Au NCs) and efficient etching of gold nanobipyramids (Au NBPs). BSA-Au NCs have slight peroxidase enzyme activity and can catalyze the oxidation of 3,3',5,5'-tetramethylbenzidine (TMB) to generate TMB⁺, while trypsin can hydrolyze BSA ligands on the surface of BSA-Au NCs, thus exposing more catalytic active sites of BSA-Au NCs and resulting in the enhancement of the peroxidase activity of BSA-Au NCs, hence more TMB⁺ is generated. Under acidic conditions, TMB⁺ can etch Au NBPs efficiently, consequently affecting the aspect ratio of Au NBPs accompanied by the ultraviolet-visible (UV-vis) spectra blue shifting of the system. Furthermore, this also results in color variations that can be distinguished and recognized by naked eyes without any expensive and sophisticated instruments. This multicolor sensor has an available linear relationship with the logarithm of the trypsin concentration in the range of 0.1-100 μg/mL, and the detection limit is 0.045 μg/mL. The designed sensor has been used to detect the concentration of trypsin in human serum samples from healthy individuals and pancreatitis patients with satisfactory results.

A label-free G-quadruplex aptamer fluorescent aptasensor for visual and real-time kanamycin detection in lake and human samples

Antibiotic abuse is considered a serious problem affecting human health, necessitating that great attention be paid to explore robust, simple and sensitive methods for rapid evaluation. In this paper, we developed a fluorescent aptasensor for visual and real-time kanamycin detection by taking advantage of the label-free strategy based on H-aggregate disassembly of a chiral cyanine dye induced by a G-quadruplex aptamer. The good sensitivity and selectivity enabled this aptasensor to have a detection limit as low as 43 nM and have high specificity for kanamycin recognition. Furthermore, this assay was successfully applied for the detection of kanamycin in lake water and urine with excellent recoveries.

Gold Nanoparticles-Based Colorimetric Assays for Environmental Monitoring and Food Safety Evaluation

Recent years have witnessed an exponential increase in the research on gold nanoparticles (AuNPs)-based colorimetric sensors to revolutionize point-of-use sensing devices. Hence, this review is compiled focused on current progress in the design and performance parameters of AuNPs-based sensors. The review begins with the characteristics of AuNPs, followed by a brief explanation of synthesis and functionalization methods. Then, the mechanisms of AuNPs-based sensors are comprehensively explained in two broad categories based on the surface plasmon resonance (SPR) characteristics of AuNPs and their peroxidase-like catalytic properties (nanozyme). SPR-based colorimetric sensors further categorize into aggregation, anti-aggregation, etching, growth-mediated, and accumulation-based methods depending on their sensing mechanisms. On the other hand, peroxidase activity-based colorimetric sensors are divided into two methods based on the expression or inhibition of peroxidase-like activity. Next, the analytes in environmental and food samples are classified as inorganic, organic, and biological pollutants, and recent progress in detection of these analytes are reviewed in detail. Finally, conclusions are provided, and future directions are highlighted. Improving the sensitivity, reproducibility, multiplexing capabilities, and cost-effectiveness for colorimetric detection of various analytes in environment and food matrices will have significant impact on fast testing of hazardous substances, hence reducing the pollution load in environment as well as rendering food contamination to ensure food safety.

Nanozyme-based pollutant sensing and environmental treatment: Trends, challenges, and perspectives

Nanozymes are defined as nanomaterials exhibiting enzyme-like properties, and they possess both catalytic functions and nanomaterial's unique physicochemical characteristics. Due to the excellent stability and improved catalytic activity in comparison to natural enzymes, nanozymes have established a wide base for applications in environmental pollutants monitoring and remediation. Nanozymes have been applied in the detection of heavy metal ions, molecules, and organic compounds, both quantitatively and qualitatively. Additionally, within the natural environment, nanozymes can be employed for the degradation of organic and persistent pollutants such as antibiotics, phenols, and textile dyes. Further, the potential sphere of applications for nanozymes traverses from indoor air purification to anti-biofouling agents, and even they show promise in combatting pathogenic bacteria. However, nanozymes may have inherent toxicity, which can restrict their widespread utility. Thus, it is important to evaluate and monitor the interaction and transformation of nanozymes towards biosphere damage when employed within the natural environment in a cradle-to-grave manner, to assure their utmost safety. In this context, various studies have concluded that the green synthesis of nanozymes can efficiently overcome the toxicity limitations in real life applications, and nanozymes can be well utilized in the sensing and degradation of several toxic pollutants including metal ions, pesticides, and chemical warfare agents. In this seminal review, we have explored the great potential of nanozymes, whilst addressing a range of concerns, which have often been overlooked and currently restrict widespread applications and commercialization of nanozymes.

Determination Methods of the Risk Factors in Food Based on Nanozymes: A Review

Food safety issues caused by foodborne pathogens, chemical pollutants, and heavy metals have aroused widespread concern because they are closely related to human health. Nanozyme-based biosensors have excellent characteristics such as high sensitivity, selectivity, and cost-effectiveness and have been used to detect the risk factors in foods. In this work, the common detection methods for pathogenic microorganisms, toxins, heavy metals, pesticide residues, veterinary drugs, and illegal additives are firstly reviewed. Then, the principles and applications of immunosensors based on various nanozymes are reviewed and explained. Applying nanozymes to the detection of pathogenic bacteria holds great potential for real-time evaluation and detection protocols for food risk factors.

Dual Application: p-CuS/n-ZnS Nanocomposite Construction for High-Efficiency Colorimetric Determination and Photocatalytic Degradation of Tetracycline in Water

Herein, CuS was incorporated with ZnS to form a novel nanocomposite via cation exchange, and the product was then employed for dual application of the colorimetric determination and photocatalytic degradation of tetracycline (TC) in water. The formed p-n heterojunction provided an improved gap width and electron mobility, which could rapidly catalyze H₂O₂ to produce plenty of •OH, supporting a color conversion with TMB. Meanwhile, the addition of TC could lead to the further enhancement in colorimetric signal, and the distinction level was sensitive to the target amount. Additionally, under light conditions, the p-CuS/n-ZnS could produce •O₂^-, •OH, and h⁺ through photocatalysis, and these ions could degrade the TC via oxidation. In the colorimetric determination of TC, the signal responses were obtained within 10 min, and the detection limit was 20.94 nM. The recovery rates were 99% and 106% for the water samples from Ganjiang river. In the photocatalytic degradation, the TC was degraded by 91% within 120 min, which was threefold that of ZnS. Meanwhile, the morphology feature of the p-CuS/n-ZnS remained after multiple uses, suggesting a favorable material stability. This strategy provides application prospects for the monitoring and control of antibiotics in water.

Recent Advances in Construction and Application of Metal-Nanozymes in Pharmaceutical Analysis

Nanozymes, made of emerging nanomaterials, have similar activity to natural enzyme and exhibit promising applications in in the fields of environment, biology and medicine, and food safety science. In recent years, with the deep finding and research to nanozymes by researchers, its application in field of pharmaceutical analysis has emerged gradually, possessing great significance in drug safety evaluation and quality control. This review summarizes the construction of metal nanozymes, strategies to improve their performance and their application in pharmaceutical detection and analysis, especially in detection of target analytes consisting of small molecule medicine macromolecule, toxic and others, which proposes theoretical foundation for development of nanozymes in this field. At the same time, it also provides opportunities and challenges for the construction and application of new nanozymes.

Colorimetric determination of tetracyclines based on aptamer-mediated dual regulation of gold nanoparticle aggregation and in situ silver metallization

A colorimetric assay was described for determination of tetracyclines (TCs) in complex matrices based on dual regulation of gold nanoparticle (AuNP) aggregation and in situ silver metallization. The reaction between p-aminophenol and silver ions (Ag⁺) catalyzed by aptamer (Apt)-functionalized AuNPs promoted the in situ deposition of Ag shells on AuNPs to afford core-shell bimetallic NPs (Au@AgNPs). When the target is present, Apt is separated from the AuNP surface through the Apt-target interaction. With the desorption of Apts, AuNPs catalyzed the formation of more aggregated Au@AgNPs with a thinner Ag shell, corresponding to the solution color gradually changing from orange-yellow to brown. Using A₆₀₀/A₄₁₀ as the determination signal, the assay gave visible linear relationships for TCs in the range of 0.3-6.0 μmol L^-1 with a detection limit (LOD) of 33.6 nmol L^-1. In particular, the assay was successfully applied to detect TCs in real samples with the recovery rate ranging from 91.2% to 106% and relative standard deviation (RSD) less than 4.6%. These results meet the requirements of sample analysis.

Eu doped Ti3C2 quantum dots to form a ratiometric fluorescence platform for visual and quantitative point-of-care testing of tetracycline derivatives

Antibiotic residues have become a public health issues, the fast detection of tetracycline (Tc) in the environment is urgently required. In this work, Ti₃C₂ quantum dots (Ti₃C₂ QDs) and Europium ions jointly constructed a ratiometric fluorescence (FL) platform for the detection of Tc, based on synergistic impact of the Foster Resonance Energy Transfer (FRET) from Ti₃C₂ QDs to Eu³⁺ ions and the Antenna Effect (AE) between Tc and Eu³⁺ ions. And we proposed a ratiometric FL platform for detecting Tc with good linear response range (100-1000 uM) and low detection limit (48.79 nM). Meanwhile, we applied this platform to detect a serious of β-diketone ligands of Eu³⁺ ions, demonstrating the platform's versatility for this category of chemical. Furthermore, based on the color changes of QDs@Eu³⁺ from blue to red at 365 nm ultraviolet light, an intelligent detection smart device was built for the visual semi-quantitative detection of Tc in actual samples. We proved the applicability of the device in complicated samples and the potential for rapid, sensitive, intuitive and point-of-care detection in the field of environment, food, pharmaceutical and agriculture.

Multiplex Detection of Antibiotic Residues in Milk: Application of MCR-ALS on Excitation-Emission Matrix Fluorescence (EEMF) Data Sets

The presence of antibiotics and their metabolites in milk and dairy products is a serious concern because of their harmful effects on human health. In the current study, a novel synergistic bimetallic nanocluster with gold and silver as an emission fluorescence probe was investigated for the simultaneous determination of tetracycline (TC), ampicillin (AMP), and sulfacetamide (SAC) antibiotics in the milk samples using excitation-emission matrix fluorescence (EEMF) spectroscopy. The multivariate curve resolution-alternating least squares (MCR-ALS) method was implemented to analyze augmented EEMF data sets to quantify the multicomponent systems in the presence of interferences with considerable spectral overlap. A pseudo-univariate calibration curve of the resolved emission spectra intensity against the concentration of the mentioned antibiotics was linear in the range of 5-5000 ng mL^-1 for AMP and 50-5000 ng mL^-1 for TC and SAC. The calculated values of the limit of detection ranged between 1.4 and 14.6 ng mL^-1 with a relative standard deviation (RSD) of less than 4.9%. The obtained results show that the EEMF/MCR-ALS methodology using an emission fluorescence probe is a powerful tool for the simultaneous quantification of TC, AMP, and SAC in complex matrices with highly overlapped spectra.

Quantum dots based sensitive nanosensors for detection of antibiotics in natural products: A review

Residual antibiotics in food products originated from administration of the antibiotics to animals may be accumulated through food metabolism in the human body and endanger safety and health. Thus, developing a prompt and accurate way for detection of antibiotics is a crucial issue. The zero-dimensional fluorescent probes including metals based, carbon and graphene quantum dots (QDs), are highly sensitive materials to use for the detection of a wide range of antibiotics in natural products. These QDs demonstrate unique optical properties like tunable photoluminescence (PL) and excitation-wavelength dependent emission. This study investigates the trends related to carbon and metal based QDs preparation and modification, and their diverse detection application. We discuss the performance of QDs based sensors application in various detection systems such as photoluminescence, photoelectrochemical, chemiluminescence, electrochemiluminescence, colorimetric, as well as describing their working principles in several samples. The detecting mechanism of a QDs-based sensor is dependent on its properties and specific interactions with particular antibiotics. This review also tries to describe environmental application and future perspective of QDs for antibiotics detection.

Regulation Mechanism of ssDNA Aptamer in Nanozymes and Application of Nanozyme-Based Aptasensors in Food Safety

Food safety issues are a worldwide concern. Pathogens, toxins, pesticides, veterinary drugs, heavy metals, and illegal additives are frequently reported to contaminate food and pose a serious threat to human health. Conventional detection methods have difficulties fulfilling the requirements for food development in a modern society. Therefore, novel rapid detection methods are urgently needed for on-site and rapid screening of massive food samples. Due to the extraordinary properties of nanozymes and aptamers, biosensors composed of both of them provide considerable advantages in analytical performances, including sensitivity, specificity, repeatability, and accuracy. They are considered a promising complementary detection method on top of conventional ones for the rapid and accurate detection of food contaminants. In recent years, we have witnessed a flourishing of analytical strategies based on aptamers and nanozymes for the detection of food contaminants, especially novel detection models based on the regulation by single-stranded DNA (ssDNA) of nanozyme activity. However, the applications of nanozyme-based aptasensors in food safety are seldom reviewed. Thus, this paper aims to provide a comprehensive review on nanozyme-based aptasensors in food safety, which are arranged according to the different interaction modes of ssDNA and nanozymes: aptasensors based on nanozyme activity either inhibited or enhanced by ssDNA, nanozymes as signal tags, and other methods. Before introducing the nanozyme-based aptasensors, the regulation by ssDNA of nanozyme activity via diverse factors is discussed systematically for precisely tailoring nanozyme activity in biosensors. Furthermore, current challenges are emphasized, and future perspectives are discussed.

The recent development of nanozymes for food quality and safety detection

As potential mimics of natural enzymes, nanozymes overcome many disadvantages of natural enzymes such as complex preparation and purification process, high price, poor stability and low recycling efficiency. Combined with...