M13 phage-based nanoprobe for SERS detection and inactivation of Staphylococcus aureus

A sensitive SERS-based assay technique for accurate detection of foodborne pathogens without interference

The accurate and sensitive detection of foodborne pathogens is critical for timely food quality supervision and human health. To address this issue, herein, we developed a simple and novel surface-enhanced Raman scattering (SERS) assay using p-mercaptobenzoic acid (MBN)-modified gold nanoparticles (Au NPs) and magnetic beads for interference-free detection of Escherichia coli (E. coli). This assay technique cleverly reduced silver ions (Ag+) on the surface of E. coli (bacteria@Ag NPs), and the functionalized magnetic beads (capture probes) captured and enriched bacteria@Ag NPs, forming the structure of the capture probes-bacteria@Ag NPs. Then, the capture probes-bacteria@Ag NPs were dissolved in the acidic medium, and the Ag NPs on the surface of E. coli was converted to Ag+ again. Due to the special coordination between Ag+ and MBN-modified Au NPs (functionalized Au NPs), the SERS intensity of MBN exhibited a positive correlation with the E. coli concentration, and the SERS detection assay of E. coli was established. The signal of the functionalized Au NPs located at 2228 cm-1 perfectly avoided the spectral overlap with coexisting materials in the Raman fingerprint region, which ensured the accuracy of the technique. The controlled aggregation of the functionalized Au NPs ensured the reproducibility and reliability of the detection system; the emergence of MBs greatly reduced the reaction time and made sure the operation was rapid, simple and portable. The limit of detection (LOD) for E. coli was as low as 10 cfu mL-1, and the detection assay was successfully applied for the detection of E. coli in bottled water and milk. As a sensitive and accurate analytical technique for the detection of pathogens, this SERS-based method has great potential to be applied in the field of food safety.

Principles, Methods, and Real-Time Applications of Bacteriophage-Based Pathogen Detection

Bacterial pathogens in water, food, and the environment are spreading diseases around the world. According to a World Health Organization (WHO) report, waterborne pathogens pose the most significant global health risks to living organisms, including humans and animals. Conventional bacterial detection approaches such as colony counting, microscopic analysis, biochemical analysis, and molecular analysis are expensive, time-consuming, less sensitive, and require a pre-enrichment step. However, the bacteriophage-based detection of pathogenic bacteria is a robust approach that utilizes bacteriophages, which are viruses that specifically target and infect bacteria, for rapid and accurate detection of targets. This review shed light on cutting-edge technologies about the novel structure of phages and the immobilization process on the surface of electrodes to detect targeted bacterial cells. Similarly, the purpose of this study was to provide a comprehensive assessment of bacteriophage-based biosensors utilized for pathogen detection, as well as their trends, outcomes, and problems. This review article summaries current phage-based pathogen detection strategies for the development of low-cost lab-on-chip (LOC) and point-of-care (POC) devices using electrochemical and optical methods such as surface-enhanced Raman spectroscopy (SERS).

Using gold-based nanomaterials for fighting pathogenic bacteria: from detection to therapy

Owing to the unique quantum size effect and surface effect, gold-based nanomaterials (GNMs) are promising for pathogen detection and broad-spectrum antimicrobial activity. This review summarizes recent research on GNMs as sensors for detecting pathogens and as tools for their elimination. Firstly, the need for pathogen detection is briefly introduced with an overview of the physicochemical properties of gold nanomaterials. And then strategies for the application of GNMs in pathogen detection are discussed. Colorimetric, fluorescence, surface-enhanced Raman scattering (SERS) techniques, dark-field microscopy detection and electrochemical methods can enable efficient, sensitive, and specific pathogen detection. The third section describes the antimicrobial applications of GNMs. They can be used for antimicrobial agent delivery and photothermal conversion and can act synergistically with photosensitizers to achieve the precise killing of pathogens. In addition, GNMs are promising for integrated pathogen detection and treatment; for example, combinations of colorimetric or SERS detection with photothermal sterilization have been demonstrated. Finally, future outlooks for the applications of GNMs in pathogen detection and treatment are summarized.

Advanced Vibrational Spectroscopy and Bacteriophages Team Up: Dynamic Synergy for Medical and Environmental Applications

Bacteriophages are emerging as a promising alternative in combating antibiotic-resistant bacteria amidst the escalating global antimicrobial resistance crisis. Recently, there has been a notable resurgence of interest in phages, prompting extensive research into their therapeutic potential. Beyond conventional microbiology and virology techniques, such as genomics and proteomics, novel phenotypic and chemical characterization methods are being explored. Among these, there is a growing interest in vibrational spectroscopy, especially in advanced modalities such as surface-enhanced Raman spectroscopy (SERS), tip-enhanced Raman spectroscopy (TERS), and atomic force microscopy-infrared spectroscopy (AFM-IR), which offer improved sensitivity and spatial resolution. This review explores the spectrum of uses of vibrational spectroscopy for bacteriophages, including its role in diagnostics, biosensing, phage detection, assistance in phage-based therapy, and advancing basic research.

Metal Nanoparticle-Based Biosensors for the Early Diagnosis of Infectious Diseases Caused by ESKAPE Pathogens in the Fight against the Antimicrobial-Resistance Crisis

The species included in the ESKAPE group (Enterococcus faecium, Staphylococcus aureus, Klebsiella pneumoniae, Acinetobacter baumannii, Pseudomonas aeruginosa and the genus Enterobacter) have a high capacity to develop antimicrobial resistance (AMR), a health problem that is already among the leading causes of death and could kill 10 million people a year by 2050. The generation of new potentially therapeutic molecules has been insufficient to combat the AMR "crisis", and the World Health Organization (WHO) has stated that it will seek to promote the development of rapid diagnostic strategies. The physicochemical properties of metallic nanoparticles (MNPs) have made it possible to design biosensors capable of identifying low concentrations of ESKAPE bacteria in the short term; other systems identify antimicrobial susceptibility, and some have been designed with dual activity in situ (bacterial detection and antimicrobial activity), which suggests that, in the near future, multifunctional biosensors could exist based on MNPs capable of quickly identifying bacterial pathogens in clinical niches might become commercially available. This review focuses on the use of MNP-based systems for the rapid and accurate identification of clinically important bacterial pathogens, exhibiting the necessity for exhaustive research to achieve these objectives. This review focuses on the use of metal nanoparticle-based systems for the rapid and accurate identification of clinically important bacterial pathogens.

Genetically engineered bacteriophages as novel nanomaterials: applications beyond antimicrobial agents

Bacteriophages, also known as phages, are viruses that replicate in bacteria and archaea. Phages were initially discovered as antimicrobial agents, and they have been used as therapeutic agents for bacterial infection in a process known as "phage therapy." Recently, phages have been investigated as functional nanomaterials in a variety of areas, as they can function not only as therapeutic agents but also as biosensors and tissue regenerative materials. Phages are nontoxic to humans, and they possess self-assembled nanostructures and functional properties. Additionally, phages can be easily genetically modified to display specific peptides or to screen for functional peptides via phage display. Here, we demonstrated the application of phage nanomaterials in the context of tissue engineering, sensing, and probing.

Recent Progress in Peptide-Based Molecular Probes for Disease Bioimaging

Recent strides in molecular pathology have unveiled distinctive alterations at the molecular level throughout the onset and progression of diseases. Enhancing the in vivo visualization of these biomarkers is crucial for advancing disease classification, staging, and treatment strategies. Peptide-based molecular probes (PMPs) have emerged as versatile tools due to their exceptional ability to discern these molecular changes with unparalleled specificity and precision. In this Perspective, we first summarize the methodologies for crafting innovative functional peptides, emphasizing recent advancements in both peptide library technologies and computer-assisted peptide design approaches. Furthermore, we offer an overview of the latest advances in PMPs within the realm of biological imaging, showcasing their varied applications in diagnostic and therapeutic modalities. We also briefly address current challenges and potential future directions in this dynamic field.

Fluorescent aptasensor for highly sensitive detection of Staphylococcus aureus based on dual-amplification strategy by integrating DNA walking and hybridization chain reaction

Food-borne diseases caused by bacteria threaten human health. Herein, we presented a new fluorescent aptasensor by coupling DNA walking and hybridization chain reaction (HCR) for convenient and sensitive quantification of bacteria. Staphylococcus aureus (S. aureus) was selected as target. When there was target in the system, the binding of S. aureus with its aptamer caused the disintegration of aptamer/DNA walker on the surface of AuNPs and released DNA walker. With the help of Nt.BsmAI, DNA walker moved along the surface of AuNPs and trigger probe was detached from AuNPs. The trigger probe could initiate hybridization chain reaction (HCR) and opened the stems of H1@AuNPs probe and H2@AuNPs probe. After the addition of nicking endonuclease, the adjacent upconversion nanoparticles (UCNPs, NaYF4:Yb3+, Er3+) were further away from the quenchers (AuNPs) of H1 and H2. Therefore, the fluorescence intensity of UCNPs could be restored via fluorescence resonance energy transfer (FRET). Bacteria were thus detected by recording the fluorescence intensity of UCNPs. This method is simple, rapid and sensitive. It can directly detect bacteria in a low background signal. The limit of detection (LOD) was 10 CFU/mL, detection time was less than 3 h. Recovery rates in simulated milk, honey and human serum samples ranged from 93.6 % to 105.8 %. The strategy opens up new paths for early diagnosis of diseases and food monitoring.

Surface-enhanced Raman spectroscopy for the characterization of bacterial pellets of Staphylococcus aureus infected by bacteriophage

Drug-resistant pathogenic bacteria are a major cause of infectious diseases in the world and they have become a major threat through the reduced efficacy of developed antibiotics. This issue can be addressed by using bacteriophages, which can kill lethal bacteria and prevent them from causing infections. Surface-enhanced Raman spectroscopy (SERS) is a promising technique for studying the degradation of infectious bacteria by the interaction of bacteriophages to break the vicious cycle of drug-resistant bacteria and help to develop chemotherapy-independent remedial strategies. The phage (viruses)-sensitive Staphylococcus aureus (S. aureus) bacteria are exposed to bacteriophages (Siphoviridae family) in the time frame from 0 min (control) to 50 minutes with intervals of 5 minutes and characterized by SERS using silver nanoparticles as SERS substrate. This allows us to explore the effects of the bacteriophages against lethal bacteria (S. aureus) at different time intervals. The differentiating SERS bands are observed at 575 (C-C skeletal mode), 620 (phenylalanine), 649 (tyrosine, guanine (ring breathing)), 657 (guanine (COO deformation)), 728-735 (adenine, glycosidic ring mode), 796 (tyrosine (C-N stretching)), 957 (C-N stretching (amide lipopolysaccharides)), 1096 (PO2 (nucleic acid)), 1113 (phenylalanine), 1249 (CH2 of amide III, N-H bending and C-O stretching (amide III)), 1273 (CH2, N-H, C-N, amide III), 1331 (C-N stretching mode of adenine), 1373 (in nucleic acids (ring breathing modes of the DNA/RNA bases)) and 1454 cm-1 (CH2 deformation of saturated lipids), indicating the degradation of bacteria and replication of bacteriophages. Multivariate data analysis was performed by employing principal component analysis (PCA) and partial least squares-discriminant analysis (PLS-DA) to study the biochemical differences in the S. aureus bacteria infected by the bacteriophage. The SERS spectral data sets were successfully differentiated by PLS-DA with 94.47% sensitivity, 98.61% specificity, 94.44% precision, 98.88% accuracy and 81.06% area under the curve (AUC), which shows that at 50 min interval S. aureus bacteria is degraded by the replicating bacteriophages.

Key steps for improving bacterial SERS signals in complex samples: Separation, recognition, detection, and analysis

Rapid and reliable detection of pathogenic bacteria is absolutely essential for research in environmental science, food quality, and medical diagnostics. Surface-enhanced Raman spectroscopy (SERS), as an emerging spectroscopic technique, has the advantages of high sensitivity, good selectivity, rapid detection speed, and portable operation, which has been broadly used in the detection of pathogenic bacteria in different kinds of complex samples. However, the SERS detection method is also challenging in dealing with the detection difficulties of bacterial samples in complex matrices, such as interference from complex matrices, confusion of similar bacteria, and complexity of data processing. Therefore, researchers have developed some technologies to assist in SERS detection of bacteria, including both the front-end process of obtaining bacterial sample data and the back-end data processing process. The review summarizes the key steps for improving bacterial SERS signals in complex samples: separation, recognition, detection, and analysis, highlighting the principles of each step and the key roles for SERS pathogenic bacteria analysis, and the interconnectivity between each step. In addition, the current challenges in the practical application of SERS technology and the development trends are discussed. The purpose of this review is to deepen researchers' understanding of the various stages of using SERS technology to detect bacteria in complex sample matrices, and help them find new breakthroughs in different stages to facilitate the detection and control of bacteria in complex samples.

Bioluminescence assay for rapid detection of live Staphylococcus aureus based on the enrichment of egg yolk antibody modified magnetic metal organic framework immunobeads

Specific and rapid detection of live Staphylococcus aureus (S.A) in environmental and food samples is critically important for protecting human health. In order to fulfill this purpose, two kinds of novel egg yolk antibody (IgY) immobilized immunomagnetic beads (IMBs; mSiO2-IgY and mMOF-IgY), with core-shell mSiO2 and mMOF as substrate, were prepared for selectively enriching S.A from samples. Furthermore, the IMBs with captured S.A were collected and re-dissolved in 0.5 mL PBS. After that, a cotton swab coated with sodium dodecylsulfate (SDS) was put in the solution to lyse S.A cells and emit ATP bioluminescence of the luciferin/luciferase system. Finally, a portable bioluminescence detector was used for quantification of ATP corresponding to S.A concentration. The results demonstrated that mMOF-IgY can enrich more S.A than mSiO2-IgY and emit a stronger signal. The reasons may be due to the higher immobilization amount of IgY on the IMBs. Under optimal conditions, the calibration line of S.A concentration was 10-105 CFU mL-1 by mMOF-IgY within 30 min. The low detection limit of S.A was 3 CFU mL-1. The results demonstrated that the assay takes much shorter time than plate counting. Its portability and excellent detection capability are suitable for rapid monitoring of specific pathogens in foods.

Recent advances in surface enhanced Raman spectroscopy for bacterial pathogen identifications

BACKGROUND

The rapid and reliable detection of pathogenic bacteria at an early stage is a highly significant research field for public health. However, most traditional approaches for pathogen identification are time-consuming and labour-intensive, which may cause physicians making inappropriate treatment decisions based on an incomplete diagnosis of patients with unknown infections, leading to increased morbidity and mortality. Therefore, novel methods are constantly required to face the emerging challenges of bacterial detection and identification. In particular, Raman spectroscopy (RS) is becoming an attractive method for rapid and accurate detection of bacterial pathogens in recent years, among which the newly developed surface-enhanced Raman spectroscopy (SERS) shows the most promising potential.

AIM OF REVIEW

Recent advances in pathogen detection and diagnosis of bacterial infections were discussed with focuses on the development of the SERS approaches and its applications in complex clinical settings.

KEY SCIENTIFIC CONCEPTS OF REVIEW

The current review describes bacterial classification using surface enhanced Raman spectroscopy (SERS) for developing a rapid and more accurate method for the identification of bacterial pathogens in clinical diagnosis. The initial part of this review gives a brief overview of the mechanism of SERS technology and development of the SERS approach to detect bacterial pathogens in complex samples. The development of the label-based and label-free SERS strategies and several novel SERS-compatible technologies in clinical applications, as well as the analytical procedures and examples of chemometric methods for SERS, are introduced. The computational challenges of pre-processing spectra and the highlights of the limitations and perspectives of the SERS technique are also discussed.Taken together, this systematic review provides an overall summary of the SERS technique and its application potential for direct bacterial diagnosis in clinical samples such as blood, urine and sputum, etc.

Upconversion nanoparticle-based aptasensor for rapid and ultrasensitive detection of Staphylococcus aureus by low-speed centrifugation

Opportunistic foodborne pathogens such as Staphylococcus aureus (S. aureus) can cause a wide variety of threats to public health. There is an urgent clinical need for a fast, simple, low-cost, and sensitive method. Here, we designed a fluorescence-based aptamer biosensor (aptasensor) for S. aureus detection using core-shell structured upconversion nanoparticles (CS-UCNPs) as a beacon. A S. aureus-specific aptamer was modified on the surface of CS-UCNPs for binding pathogens. The S. aureus bound to CS-UCNPs can then be isolated from the detection system by simple low-speed centrifugation. Thus, an aptasensor was successfully established for the detection of S. aureus. The fluorescence intensity of CS-UCNPs correlated with the concentration of S. aureus within the range of 6.36 × 10² to 6.36 × 10⁸ CFU mL^-1, resulting in the detected limit of S. aureus being 60 CFU mL^-1. The aptasensor performed well in real food samples (milk) with a detection limit of 146 CFU mL^-1 for S. aureus. Furthermore, we applied our aptasensor in chicken muscles for S. aureus detection, and compared it with the plate count gold standard method. There was no significant difference between our aptasensor and the plate count method within the detected limit, while the time for the aptasensor (0.58 h) was shorter than that of the plate count method (3-4 d). Therefore, we succeeded in the design of a simple, sensitive and fast CS-UCNPs aptasensor for S. aureus detection. This aptasensor system would have the potential for the detection of a wide range of bacterial species by switching the corresponding aptamer.

Engineered M13 phage as a novel therapeutic bionanomaterial for clinical applications: From tissue regeneration to cancer therapy

Bacteriophages (phages) are nanostructured viruses with highly selective antibacterial properties that have gained attention beyond eliminating bacteria. Specifically, M13 phages are filamentous phages that have recently been studied in various aspects of nanomedicine due to their biological advantages and more compliant engineering capabilities over other phages. Having nanofiber-like morphology, M13 phages can reach varied target sites and self-assemble into multidimensional scaffolds in a relatively safe and stable way. In addition, genetic modification of the coat proteins enables specific display of peptides and antibodies on the phages, allowing for precise and individualized medicine. M13 phages have also been subjected to novel engineering approaches, including phage-based bionanomaterial engineering and phage-directed nanomaterial combinations that enhance the bionanomaterial properties of M13 phages. In view of these features, researchers have been able to utilize M13 phages for therapeutic applications such as drug delivery, biodetection, tissue regeneration, and targeted cancer therapy. In particular, M13 phages have been utilized as a novel bionanomaterial for precisely mimicking natural tissue environment in order to overcome the shortage in tissue and organ donors. Hence, in this review, we address the recent studies and advances of using M13 phages in the field of nanomedicine as therapeutic agents based upon their characteristics as novel bionanomaterial with biomolecules displayed. This paper also emphasizes the novel engineering approach that enhances M13 phage's bionanomaterial capabilities. Current limitations and future approaches are also discussed to provide insight in further progress for M13 phage-based clinical applications.

Unlocking the potential of phages: Innovative approaches to harnessing bacteriophages as diagnostic tools for human diseases

Phages, viruses that infect bacteria, have been explored as promising tools for the detection of human disease. By leveraging the specificity of phages for their bacterial hosts, phage-based diagnostic tools can rapidly and accurately detect bacterial infections in clinical samples. In recent years, advances in genetic engineering and biotechnology have enabled the development of more sophisticated phage-based diagnostic tools, including those that express reporter genes or enzymes, or target specific virulence factors or antibiotic resistance genes. However, despite these advancements, there are still challenges and limitations to the use of phage-based diagnostic tools, including concerns over phage safety and efficacy. This review aims to provide a comprehensive overview of the current state of phage-based diagnostic tools, including their advantages, limitations, and potential for future development. By addressing these issues, we hope to contribute to the ongoing efforts to develop safe and effective phage-based diagnostic tools for the detection of human disease.

M13 phage: a versatile building block for a highly specific analysis platform

Viruses are changing the biosensing and biomedicine landscape due to their multivalency, orthogonal reactivities, and responsiveness to genetic modifications. As the most extensively studied phage model for constructing a phage display library, M13 phage has received much research attention as building blocks or viral scaffolds for various applications including isolation/separation, sensing/probing, and in vivo imaging. Through genetic engineering and chemical modification, M13 phages can be functionalized into a multifunctional analysis platform with various functional regions conducting their functionality without mutual disturbance. Its unique filamentous morphology and flexibility also promoted the analytical performance in terms of target affinity and signal amplification. In this review, we mainly focused on the application of M13 phage in the analytical field and the benefit it brings. We also introduced several genetic engineering and chemical modification approaches for endowing M13 with various functionalities, and summarized some representative applications using M13 phages to construct isolation sorbents, biosensors, cell imaging probes, and immunoassays. Finally, current issues and challenges remaining in this field were discussed and future perspectives were also proposed.

Colorimetric platform based on synergistic effect between bacteriophage and AuPt nanozyme for determination of Yersinia pseudotuberculosis

The development of a novel colorimetric method is reported, using vB_YepM_ZN18 phages along with AuPt nanozyme for the sensitive detection of Y. pseudotuberculosis. The phage used in this work has been extracted from hospital sewer water and is highly specific toward Y. pseudotuberculosis. The synthesized AuPt NPs possess peroxidase-like activity, which is suitable in the development of nanozyme based detection system. Furthermore, phages@MB and AuPt@phages are added into the bacterial samples for co-incubation, forming an intercalated complex. The magnetic separation and absorbance analysis of enzymatic reaction are carried out for the detection of targeted bacteria. The proposed method has a limit of detection of 14 CFU/mL, a wide linear range from 2.50 × 10¹ ~ 2.50 × 10⁷ CFU/mL and the assay completion time is 40 min. Benefitting from the outperformance of this sensor, we have successfully employed the developed sensing platform for the detection of Y. pseudotuberculosis in food industry and hospital specimens.

Ultrasensitive hairpin mediated upconversion fluorescence biosensor for Staphylococcus aureus detection in foods and waters exploiting g-C3N4-assisted catalysis

A novel g-C₃N₄ nanosheets (g-C₃N₄ NSs)-assisted upconversion fluorescent aptasensor was proposed for Staphylococcus aureus (S. aureus) detection by adopting hybridization chain reaction (HCR) as a sensitizer. Two hairpin (H1 and H2) structured DNA probes were engineered predicated on the partial complementary sequence (cDNA) of S. aureus aptamer and modified on the exterior of the upconversion nanoparticles (UCNPs), respectively. The presence of S. aureus initiated the HCR system and activated H1 and H2 probes to form a double-helix away from the g-C₃N₄ NSs vicinity. This led to the decrease in peroxidase-like activity (PA) of the g-C₃N₄ NSs and corresponding fluorescence recovery proportional to the concentration of S. aureus (10-10⁶ cfu mL^-1). The method was applied to real food samples with acceptable recoveries (91.1-101.6%) and further validated by traditional plate counting method (p > 0.05).

Recent Advances in Colorimetric Sensors Based on Gold Nanoparticles for Pathogen Detection

Infectious pathogens cause severe threats to public health due to their frightening infectivity and lethal capacity. Rapid and accurate detection of pathogens is of great significance for preventing their infection. Gold nanoparticles have drawn considerable attention in colorimetric biosensing during the past decades due to their unique physicochemical properties. Colorimetric diagnosis platforms based on functionalized AuNPs are emerging as a promising pathogen-analysis technique with the merits of high sensitivity, low-cost, and easy operation. This review summarizes the recent development in this field. We first introduce the significance of detecting pathogens and the characteristics of gold nanoparticles. Four types of colorimetric strategies, including the application of indirect target-mediated aggregation, chromogenic substrate-mediated catalytic activity, point-of-care testing (POCT) devices, and machine learning-assisted colorimetric sensor arrays, are systematically introduced. In particular, three biomolecule-functionalized AuNP-based colorimetric sensors are described in detail. Finally, we conclude by presenting our subjective views on the present challenges and some appropriate suggestions for future research directions of colorimetric sensors.

Development of cobalt oxyhydroxide-aptamer-based upconversion sensing nano-system for the rapid detection of Staphylococcus aureus

Staphylococcus aureus (S. aureus) is a common pathogen that is dangerous to humans' health. Herein, a novel upconversion fluorescent biosensor based on fluorescence resonance energy transfer from aptamer-labeled upconversion nanoparticles (UCNPs-apt) as donor and cobalt oxyhydroxide (CoOOH) nanosheets as acceptor was designed to detect S. aureus in complex matrices. The principle of the work relies on fluorescence resonance energy transfer as UCNPs-apt can self-assemble on CoOOH nanosheet surfaces by van der Waals forces to effectively quench the fluorescence. When S. aureus was added, the aptamer was able to preferentially capture the target, resulting in the dissociation of donor and acceptor and the recovery of fluorescence. The structure and morphology of the nanostructures were assigned in detail by a series of characterizations, and the energy transfer mechanism was evaluated by time-resolved lifetime measurements. Under the optimal conditions, a linear calibration plot was obtained in a concentration range of 45-4.5 × 10⁶ CFU/mL with a limit of detection of 15 CFU/mL. In addition, the proposed biosensor was used for S. aureus detection in real samples (e.g., pork, beef), and the detection result showed no significant difference (p > 0.05) compared with the conventional plate count approach. Hence, the fabricated biosensor holds a potential application for S. aureus in food analysis and public health.

An ultrasensitive fluorescence detection template of pathogenic bacteria based on dual catalytic hairpin DNA Walker@Gold nanoparticles enzyme-free amplification

Integrating the advantages of catalytic hairpin components and multi-foot DNA walker, we designed a 16S rRNA detection probe template for pathogen bacteria, which utilizes DNA ligation quencher and dual catalytic hairpin@DNA walker to induce signal recovery. The dual catalytic hairpin@DNA walker uses the walking position of the target on the AuNP as a foothold to promote the reaction, so that the biosensing of the low-abundance target sequence can induce signal recovery. During the entire experiment, no enzyme is required, which can avoid the limitation of enzyme degradation under unfavorable conditions and the inability to detect the target. Most importantly, the detection template has the advantages of high sensitivity, and its detection limit is significantly better than that of single hairpin DNA walker probe. As the detection system can sensitively and rapidly detect its targeted bacteria and not rely on any enzyme and sophisticated instrumentation, it has great potential for sensitive and specific pathogenic bacteria detection.

How Surface-Enhanced Raman Spectroscopy Could Contribute to Medical Diagnoses

In the last decade, there has been a rapid increase in the number of surface-enhanced Raman scattering (SERS) spectroscopy applications in medical research. In this article we review some recent, and in our opinion, most interesting and promising applications of SERS spectroscopy in medical diagnostics, including those that permit multiplexing within the range important for clinical samples. We focus on the SERS-based detection of markers of various diseases (or those whose presence significantly increases the chance of developing a given disease), and on drug monitoring. We present selected examples of the SERS detection of particular fragments of DNA or RNA, or of bacteria, viruses, and disease-related proteins. We also describe a very promising and elegant ‘lab-on-chip’ approach used to carry out practical SERS measurements via a pad whose action is similar to that of a pregnancy test. The fundamental theoretical background of SERS spectroscopy, which should allow a better understanding of the operation of the sensors described, is also briefly outlined. We hope that this review article will be useful for researchers planning to enter this fascinating field.

Catalytic hairpin activated gold-magnetic/gold-core-silver-shell rapid self-assembly for ultrasensitive Staphylococcus aureus sensing via PDMS-based SERS platform

Staphylococcus aureus (S. aureus) has been identified as a marker of food contamination, closely associated with human health. This work designs a sensitive and rapid bio-detection strategy for S. aureus based on hybridization chain reaction-assisted surface enhanced Raman scattering (HCR-assisted-SERS) signal amplification. In this approach, the interaction between the aptamer (Apt) and its partial complementary DNA strands (cDNA) fabricated on the surface of gold-assisted magnetic nanoparticles (Au-MNPs) and the subsequent detachment of the cDNA results in the activation of the HCR process. In the HCR, a pair of hairpin structured DNA probes (H1 and H2) with sticky ends self-assembles to form a long DNA polymer. Subsequently, the output and amplification of the SERS signal were performed by conjugating 4-ATP modified Au@Ag NPs with the obtained DNA polymer via a specific Ag-S bond, and further collected through a self-administered polydimethylsiloxane (PDMS) cone-shaped support array. The precise quantification of S. aureus was performed in the concentration range of 28 to 2.8 × 10⁶ cfu/mL, achieving a detection limit of 0.25 cfu/mL. This strategy was further applied to S. aureus detection in spiked milk samples with good recoveries (91-102%) and the relative standard deviation (4.35-8.41%). The sensing platform also showed satisfactory validation results (p > 0.05) using the traditional plate counting method. The proposed HCR-assisted SERS probe can be extended to other foodborne pathogenic bacteria types via engineering appropriate Apt and DNA initiators, thus, inspiring widespread applications in food safety and biomedical research.

Bioreduction of Gold Ions under Greener Conditions by the Thiol-Modified M13 Bacteriophage and with Hydroxylamine as the Autocatalytic Reducing Agent

Bioreduction of gold ions by the thiol-modified M13 bacteriophage (M13-SH) has been exploited as the potential alternative to conventional methods based on toxic chemicals, due to the gold affinity of the thiol groups, inherent gold reduction, and high specific surface area of the filamentous virus. Such efforts have been hindered by harsh conditions involving strong reducing agents and extreme pH that are harmful to the virus. Herein, a virus-friendly and greener method of bioreduction of AuCl₄ ^- at neutral pH based on M13-SH is demonstrated. M13-SH was prepared by coupling the virus with N-succinimidyl S-acetylthioacetate, followed by deacylation in the presence of hydroxylamine·HCl to expose the thiol groups. The key finding is that without time-consuming purification, the mixture after deacylation consisting of M13-SH, residual hydroxylamine, and so forth can directly turn ionic gold species into gold, leading to macroscopic precipitated products with interconnected linear structures consisting of fused gold nanoparticles. Besides working as the virus-friendly reducing agent with a unique autocatalytic style, hydroxylamine diminishes disulfide bonding-induced intervirus bundling of M13-SH so as to maintain its efficient biosorption of ionic gold precursors. This work demonstrates a general and green strategy of bioreduction of gold via combination of the gold-affinity proteins or organisms and the unique autocatalytic reduction of hydroxylamine.

Development of a Low-Molecular-Weight Aβ42 Detection System Using a Enzyme-Linked Peptide Assay

Alzheimer's disease (AD) is a degenerative brain disease that is the most common cause of dementia. The incidence of AD is rapidly rising because of the aging of the world population. Because AD is presently incurable, early diagnosis is very important. The disease is characterized by pathological changes such as deposition of senile plaques and decreased concentration of the amyloid-beta 42 (Aβ42) peptide in the cerebrospinal fluid (CSF). The concentration of Aβ42 in the CSF is a well-studied AD biomarker. The specific peptide probe was screened through four rounds of biopanning, which included the phage display process. The screened peptide showed strong binding affinity in the micromolar range, and the enzyme-linked peptide assay was optimized using the peptide we developed. This diagnostic method showed specificity toward Aβ42 in the presence of other proteins. The peptide-binding site was also estimated using molecular docking analysis. Finally, the diagnostic method we developed could significantly distinguish patients who were classified based on amyloid PET images.

Recent advancement in nano-optical strategies for detection of pathogenic bacteria and their metabolites in food safety

Pathogenic bacteria and their metabolites are the leading risk factor in food safety and are one of the major threats to human health because of the capability of triggering diseases with high morbidity and mortality. Nano-optical sensors for bacteria sensing have been greatly explored with the emergence of nanotechnology and artificial intelligence. In addition, with the rapid development of cross fusion technology, other technologies integrated nano-optical sensors show great potential in bacterial and their metabolites sensing. This review focus on nano-optical strategies for bacteria and their metabolites sensing in the field of food safety; based on surface-enhanced Raman scattering (SERS), fluorescence, and colorimetric biosensors, and their integration with the microfluidic platform, electrochemical platform, and nucleic acid amplification platform in the recent three years. Compared with the traditional techniques, nano optical-based sensors have greatly improved the sensitivity with reduced detection time and cost. However, challenges remain for the simple fabrication of biosensors and their practical application in complex matrices. Thus, bringing out improvements or novelty in the pretreatment methods will be a trend in the upcoming future.

Recent progress in the optical detection of pathogenic bacteria based on noble metal nanoparticles

Pathogenic bacteria have become a huge threat to social health and economy for their frighteningly infectious and lethal capacity. It is quite important to make a diagnosis in advance to prevent infection or allow a rapid treatment after infection. Noble metal nanoparticles, due to their unique physicochemical properties, especially optical properties, have drawn a great attention during the past decades and have been widely applied into all kinds of fields related to human health. By utilizing these noble metal nanoparticles, optical diagnosis platforms towards pathogenic bacteria have emerged continually, providing highly sensitive, selective, and particularly facile detection tools for clinic or point-of-care diagnosis. This review summarizes the recent development in this field. It begins with a brief introduction of pathogenic bacteria and noble metal nanoparticles. And then, optical detection methods are systematically discussed in three distinct aspects. In addition to these proof-of-concept methods, corresponding algorithms and point-of-care detection devices are also described. Finally, the review ends up with subjective views on present limitations and some appropriate advice for future research directions.

A Novel Cu(II)-Binding Peptide Identified by Phage Display Inhibits Cu2+-Mediated Aβ Aggregation

Copper (Cu) has been implicated in the progression of Alzheimer's disease (AD), and aggregation of Cu and amyloid β peptide (Aβ) are considered key pathological features of AD. Metal chelators are considered to be potential therapeutic agents for AD because of their capacity to reduce metal ion-induced Aβ aggregation through the regulation of metal ion distribution. Here, we used phage display technology to screen, synthesize, and evaluate a novel Cu(II)-binding peptide that specifically blocked Cu-triggered Aβ aggregation. The Cu(II)-binding peptide (S-A-Q-I-A-P-H, PCu) identified from the phage display heptapeptide library was used to explore the mechanism of PCu inhibition of Cu2+-mediated Aβ aggregation and Aβ production. In vitro experiments revealed that PCu directly inhibited Cu2+-mediated Aβ aggregation and regulated copper levels to reduce biological toxicity. Furthermore, PCu reduced the production of Aβ by inhibiting Cu2+-induced BACE1 expression and improving Cu(II)-mediated cell oxidative damage. Cell culture experiments further demonstrated that PCu had relatively low toxicity. This Cu(II)-binding peptide that we have identified using phage display technology provides a potential therapeutic approach to prevent or treat AD.

Recent Advances in Surface-Enhanced Raman Scattering Magnetic Plasmonic Particles for Bioapplications

The surface-enhanced Raman scattering (SERS) technique, that uses magnetic plasmonic particles (MPPs), is an advanced SERS detection platform owing to the synergetic effects of the particles’ magnetic and plasmonic properties. As well as being an ultrasensitive and reliable SERS material, MPPs perform various functions, such as aiding in separation, drug delivery, and acting as a therapeutic material. This literature discusses the structure and multifunctionality of MPPs, which has enabled the novel application of MPPs to various biological fields.

Multiplexed detection of bacterial pathogens based on a cocktail of dual-modified phages

Rapid, quantitative, and sensitive assays for the multiplexed detection of bacterial pathogens are urgently needed for public health. Here, we report the generation of dual-modified phage sensors for the simultaneous detection of multiple pathogenic bacteria. The M13KE phage was dual modified to display the targeting peptide on the minor coat protein pIII (∼5 copies) and the streptavidin-binding (StrB) peptide on the major coat protein pVIII (∼2700 copies). The targeting peptide specifically recognizes the target bacteria, and the StrB peptide acts as the efficient signal amplification and transduction unit upon binding with fluorescently tagged streptavidin. The bright fluorescence emitted from individual target bacteria can be clearly distinguished from the background via both the flow cytometry and fluorescence microscopy. Three different dual-modified phages targeting E. coli O157:H7, Salmonella Typhimurium, and Pseudomonas aeruginosa were constructed, and high specificity was verified via a large excess of other non-target bacteria. Using a 40 mL sample volume, the target bacteria detection limit was approximately 10² cells/mL via flow cytometry measurement in the presence of other non-target bacteria. By combining these three dual-modified phages into a cocktail, simultaneous detection and quantification of three target bacterial pathogens was demonstrated with good linearity. The strategy of constructing dual-modified phage represents a promising tool in the detection of bacterial pathogens.