Dispersive liquid-liquid microextraction (DLLME) and external real matrix calibration for the determination of the UV absorber 2-(2H-benzotriazol-2-yl)-4,6-di-tert-pentylphenol (UV 328) and its metabolites in human blood

Microextraction techniques for occupational biological monitoring: Basic principles, current applications and future perspectives

The application of green microextraction techniques (METs) is constantly being developed in different areas including pharmaceutical, forensic, food and environmental analysis. However, they are less used in biological monitoring of workers in occupational settings. Developing valid extraction methods and analytical techniques for the determination of occupational indicators plays a critical role in the management of workers' exposure to chemicals in workplaces. Microextraction techniques have become increasingly important because they are inexpensive, robust and environmentally friendly. This study aimed to provide a comprehensive review and interpret the applications of METs and novel sorbents and liquids in biological monitoring. Future perspectives and occupational indicators that METs have not yet been developed for are also discussed.

Contamination of ultraviolet absorbers in food: toxicity, analytical methods, occurrence and risk assessments

Ultraviolet (UV) absorbers are chemical substances that are widely used as defenses against the damaging effects of solar radiations. UV absorbers, despite their benefits, are categorized as emerging pollutants because they have been demonstrated to be mutagenic, toxic, pseudo-persistent, bio-accumulative, and to have strong estrogenic effects. Because of their common use in personal care products, they continue to enter the environment. Several food samples, particularly those derived from aquatic sources, have been found to be contaminated with these compounds. Toxic effects on aquatic life, such as metabolic imbalance and developmental toxicity, result from the continued presence of UV absorbers in aquatic bodies. In addition, the degree of exposure to these pollutants in foods should be examined because there are certain risks associated with their consumption by humans. Therefore, this review focuses on the toxicity, analytical techniques, occurrence, and risk assessments of UV absorbers found in food.

Development of a generic sample preparation method using dispersive liquid-liquid microextraction for the monitoring of leachable compounds in hospital pharmacy-prepared prefilled drug products

Performant sample preparation is mandatory in any leachable study to clean and preconcentrate analytes within the sample to offer the best possible extraction recovery as well the best precision for any given substance. The aim consists in developing a sample preparation method for hospital pharmacy-prepared drug products such as long-term storage prefilled syringes, vials and IV bags for the screening of leachable compounds. The Quality Control Laboratory of the Pharmacy of the Lausanne University Hospital (Switzerland) has developed a time- and cost-effective, highly sensitive, robust, and fast method using liquid chromatography coupled with high-resolution mass spectrometry (LC-HRMS) for the analysis of 205 plastic additives. An innovative setup, based on postcolumn infusion (PCI) using 2% ammonium hydroxide in methanol was used to boost the signal intensity of the analytes in MS detection. A database for extractable and leachable trace assessment (DELTA) was built to assist in the screening process of 205 plastic packaging-related compounds. The development of the sample preparation was based on 33 plastic additive candidates in different hospital pharmacy compounding solutions, and their extraction recovery rates as well as their relative standard deviation were taken into consideration. In conclusion, the developed DLLME was assigned with ultrasound assistance and triple extraction, which brought about extraction recovery rates between 67% and 92%, a good RSD <10%, and a preconcentration factor of 50×. Therefore, DLLME could be considered suitable for the semiquantitative screening of leachable additives in simple hospital pharmacy-prepared prefilled drug products.

Development and Validation of a DLLME-GC-MS-MS Method for the Determination of Benzotriazole UV Stabilizer UV-327 and Its Metabolites in Human Blood

2-(5-Chloro-benzotriazol-2-yl)-4,6-di-(tert-butyl)phenol (UV-327) is used as an ultraviolet (UV) absorber in plastic materials and coatings. To investigate its metabolism and to assess human exposure, analytical methods are necessary for the determination of UV-327 and its metabolites in human biological specimens. The method thus presented targets the determination of UV-327 and several of its predicted metabolites in blood using protein precipitation, dispersive liquid-liquid microextraction (DLLME) and derivatization. The trimethylsilylated analytes and internal standards are separated by gas chromatography and analyzed with tandem mass spectrometry. The DLLME procedure was optimized with respect to the type and volume of disperser and extraction solvents, the pH value of the sample solution and the addition of salt. During method development, an effective ex vivo lactone/hydroxyl carboxylic acid interconversion was observed for two metabolites, each containing a carboxyl group adjacent to the phenolic hydroxyl group. The analytes resulting from interconversion enabled a more sensitive and reliable determination of the metabolites compared to their native structures. Method validation revealed limits of detection between 0.02 and 0.36 µg/L. The mean relative recovery rates ranged from 91% to 118%. Precision and repeatability were demonstrated by relative standard deviations in the range of 0.6-14.2% and 1.1-13.7%, respectively. The presently described procedure enables the sensitive and robust analysis of UV-327 and its metabolites in human blood and allows the elucidation of the human UV-327 metabolism as well as the assessment of exposure in potentially exposed individuals.

A novel method for the direct detection of light stabilizer Tinuvin 622 in polymer additives by gel permeation chromatography combined with multi-angle laser light scattering

Tinuvin 622, an oligomeric light stabilizer, is widely used in plastics to reduce light and heat induced degradation and extend their service life, therefore its detection is of great importance for quality control of plastic products. However, the classical analytical methods of Tinuvin 622, such as chromatography and mass spectrometry, are difficult to achieve direct qualitative and quantitative analysis, and simultaneously to obtain the molecular weight and molecular weight distribution information. Herein, we propose for the first time the combination of gel permeation chromatography with multi-angle laser light scattering as a simple and direct method to detect Tinuvin 622 in polymers and simultaneously to obtain its molecular weight distribution information. The linearity of the method was good in the concentration range of 0.1-5.0 mg/mL Tinuvin 622 with correlation coefficient (R² = 0.9999), and the recoveries of Tinuvin 622 at three addition levels ranged from 94.0% to 98.7%, with relative standard deviations of no more than 1.73%. The proposed method has been successfully used to detect Tinuvin 622 in actual samples of polymer additives. Compared with existing analytical methods, Tinuvin 622 has a single peak shape in our method, which is easy to identify and quantify accurately; more importantly, our method can simultaneously characterize the molecular weight and molecular weight distribution of Tinuvin 622, which makes up for the shortcomings of other approaches and provides a new tool for quality monitoring of polymer additives.

Degradation of Benzotriazole UV Stabilizers in PAA/d-Electron Metal Ions Systems-Removal Kinetics, Products and Mechanism Evaluation

Benzotriazole UV stabilizers (BUVs) have gained popularity, due to their absorption properties in the near UV range (200–400 nm). They are used in the technology for manufacturing plastics, protective coatings, and cosmetics, to protect against the destructive influence of UV radiation. These compounds are highly resistant to biological and chemical degradation. As a result of insufficient treatment by sewage treatment plants, they accumulate in the environment and in the tissues of living organisms. BUVs have adverse effects on living organisms. This work presents the use of peracetic acid in combination with d-electron metal ions (Fe²⁺, Co²⁺), for the chemical oxidation of five UV filters from the benzotriazole group: 2-(2-hydroxy-5-methylphenyl)benzotriazole (UV-P), 2-tert-butyl-6-(5-chloro-2H-benzotriazol-2-yl)-4-methylphenol (UV-326), 2,4-di-tert-butyl-6-(5-chloro-2H-benzotriazol-2-yl)phenol (UV-327), 2-(2H-benzotriazol-2-yl)-4,6-di-tert-pentylphenol (UV-328), and 2-(2H-benzotriazol-2-yl)-4-(1,1,3,3-tetramethylbutyl)phenol (UV-329). The oxidation procedure has been optimized based on the design of experiments (DoE) methodology. The oxidation of benzotriazoles follows first order kinetics. The oxidation products of each benzotriazole were investigated, and the oxidation mechanisms of the tested compounds were proposed.

Human metabolism and kinetics of the UV absorber 2-(2H-benzotriazol-2-yl)-4,6-di-tert-pentylphenol (UV 328) after oral administration

2-(2H-Benzotriazol-2-yl)-4,6-di-tert-pentylphenol (UV 328; CAS: 25973-55-1) is an ultraviolet light (UV) absorber which belongs to the class of hydroxy phenol benzotriazoles. Therefore, UV 328 is added to plastics and other polymers due to its photostability to prevent discoloration and prolong product stability which may result in an exposure of consumers. However, information about the toxic effects on humans and the human metabolism are still lacking. In the present study, human metabolism pathways of UV 328 and its elimination kinetics were explored. For that purpose, three healthy volunteers were orally exposed to a single dose of 0.3 mg UV 328/kg bodyweight. UV 328 and its metabolites were investigated in blood and urine samples collected until 48 and 72 h after exposure, respectively. Thereby, previously published analytical procedures were applied for the sample analysis using dispersive liquid–liquid microextraction and subsequent measurement via gas chromatography coupled to tandem mass spectrometry with advanced electron ionization. UV 328 was found to be oxidized at its alkyl side chains leading to the formation of hydroxy and/or oxo function with maximum blood concentrations at 8–10 h after exposure for UV 328-6/3-OH, UV 328-4/3-OH and UV 328-4/3-CO. In contrast, a plateau for UV 328-4/3-CO-6/3-OH levels was reached around 10 h post-dosage. The highest blood levels were found for native UV 328 at 8 h after ingestion. Furthermore, biphasic elimination kinetics in blood were revealed for almost all detected metabolites. UV 328 and its metabolites did not occur in blood as conjugates. The renal elimination kinetics were very similar with the kinetics in blood. However, the prominence of the metabolites in urine was somewhat different compared to blood. In contrast, mostly conjugated metabolites occurred for renal elimination. In urine, UV 328-4/3-CO-6/3-OH was found to be the most dominant urinary biomarker followed by UV 328-6/3-OH and UV 328-4/3-OH. In total, approximately 0.1% of the orally administered dose was recovered in urine within 72 h. Although high levels of UV 328 in blood proved good resorption and high systemic availability of the substance in the human body, the urine results revealed a rather low quantitative metabolism and urinary excretion rate. Consequently, biliary excretion as part of the enterohepatic cycle and elimination via feces are assumed to be the preferred pathways instead of renal elimination.